Construction of Revenue Office Quarter (Category E2-1 Unit, E1-1 Unit, D1-4 Unit, D-6 Unit) at Jamnagar, Dist.Jamnagar

Name of Work : CONSTRUCTION OF REVENUE OFFICERS QUARTERS (CAT. E-2, E-1, D-1

& D Type) AT JAMNAGAR, DIST: JAMNAGAR.

BILL OF QUANTITIES

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

1 Clearing and grubbing road land including 4.40 Hect. 34889.37

uprooting rank vegetation grass bushes, shrubs,

sapling and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of

unserviceable materials(D) By mechanical means in

area of thorny jungle

2 Demolition in cement mortar of Brick work and 516.00 Cum. 576.29

stone masonry including stacking of serviceable

materilas and disposal of unserviceable materials

with all lead and lift.

3 Demolition in RCC work including stacking of 282.00 Cum. 1108.12

serviceable materilas and disposal of unserviceable

materials with all lead and lift.

4 Dismentling doors, windows, ventilators etc. (wood 26.00 No. 196.65

or steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(i) Not

exceeding 3 Sq.M. in area.

5 Excavation for foundation in Dense or Hard soil incl. 988.20 Cum. 161.07

sorting out and stacking of useful materials and

disposing of the excavated stuff with all lead and lift.

6 Excavation for foundation in Hard Murrum incl. 1985.10 Cum. 273.38

sorting out and stacking of useful materials and

disposing of the excavated stuff with all lead and lift.

7 Excavation for foundation in Soft Rock not requiring 2715.30 Cum. 285.30

blasting incl. sorting out and stacking of useful

materials and disposing of the excavated stuff up to

all lead and lift.

8 Providing and laying cement concrete 1:2:4 (1- 63.00 Cum. 3803.06

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in Foundation

9 Providing and casting in situ Ordinary cement 3647.20 Cum. 3789.70

concrete M-150 for R.C.C. Raft and cut-off walls

including necessary shuttering laying, vibrating,

ramming and curing complete.

10 Pro. & laying controlled cement concrete M-250 and 155.00 Cum. 4836.89

curing complete inclu. the cost of form work and

foundation, footings, base of column and mass

11 Providing and laying Controlled cement concrete M 473.00 Cum. 8026.24

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Column FOR all Floor.

12 Providing and laying Controlled cement concrete M 304.40 Cum. 6543.79

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Plinth Beam .

1 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

13 Providing and laying Controlled cement concrete M 271.90 Cum. 7055.11

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Beam for all floor.

14 Providing and laying Controlled cement concrete M 483.00 Cum. 6514.58

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Slab for any thickness

15 Providing and laying controlled cement concrete 180.00 Cum. 4674.06

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in GRADE Slab

16 Providing and laying Controlled cement concrete M 18.00 Cum. 7308.36

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Stair Case for all floor.

17 Providing and laying Controlled cement concrete M 24.60 Cum. 6563.99

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Lintel for all Floor.

18 Providing and laying Controlled cement concrete M 10.00 Cum. 7275.64

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work for chhajja for all floors.

19 Providing and laying Controlled cement concrete M 31.00 Cum. 6950.43

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in RCC wall for all floor.

20 Providing and laying Controlled cement concrete M 49.00 Cum. 13270.78

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work for V & H Fins for all

21 Providing and laying Controlled cement concrete M 82.60 Cum. 6276.14

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in wall caps/ coping.

22 Providing and laying cement concrete 1:4:8 (1- 1248.10 Cum. 2910.82

cement : 4-Sand : 8-Crust stone aggregate 40mm

nominal size) & curing complete excluding cost of

formwork in foundation and plinth.

23 Providing Thermo Mechanical treated bar FE-500D 303126.60 Kg. 77.90

Steel Reinforcement for R.C.C. work including

bending, binding and placing in Position complete

24 Filling available excavated earth (excluding 467.50 Cum. 137.47

rock) in trenches. plinth, sides of foundations

etc. in layers not exceeding 20cm. in depth

consolidating each disposited layer by ramming

25 Filling in foundation and plinth with murrum or 1215.00 Cum. 304.59

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc.

26 Filling in plinth with sand under floors including 190.00 Cum. 489.28

watering ramming, consolidating and dressing

2 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

27 Carrying out plinth treatment to post construction / 1124.00 Sqm. 124.35

existing structure by spraying chemical solution for

termite control treatment including labour and

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Concentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concentration inclusive of one

litre chemical emulsion application at the rate of

Litre chemical / Sqm of surface is recommended as

28 Providing and laying and fixing 50 mm thick 80.00 Sqm. 1491.03

expansion joint by hydro cell semi rigid UV

resistance with high performance laminated closed

cell polythene foam joint filler in sheet foam as

directed, etc. complete.

29 Brickwork using common burnt Clay building bricks 389.00 Cum. 4310.73

having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand).

30 Brickwork using common burnt Clay building bricks 1271.00 Cum. 4632.13

having crushing strength not less than

kg./Sq.Cm. in super structure in Cement Mortar 1:5.

(1- Cement : 5 -fine sand) for all floor.

31 Half brick masonry in common brunt clay 398.00 Sqm. 771.81

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 ( 1-

Cement : 4 -coarse sand ) in Super structure for all

32 Providing and laying 25mm polished kota stone slab 715.00 Sqm. 1019.39

flooring over 20mm (Average) thick base of cement

mortar 1`:6 (1-cement:6-coarse sand) or L.M. 1:1.5

laid over and jointed with grey cement slurry

including rubbing and polishing etc comp.

33 Providing and laying 600 x 600 mm double charge 1414.00 Sqm. 1895.77

Vitrified tiles 10mm thick tiles flooring over 20mm

(Average) base of Cement Mortar 1:6 (1-Cement :

Coarse Sand) on new surface and jointed finished

with 3mm Horizontal grooves filed with coloured

epoxy grouting cleaning the surface etc. complete

using colour & shade to be approved by Architect.

34 Providing and laying 600 x 600 mm double charge 210.00 Sqm. 1975.56

Vitrified tiles 10mm thick tiles for skirting over

20mm (Average) base of Cement Mortar 1:6 (1-

Cement : 6 Coarse Sand) on new surface and

finished with 3mm Horizontal grooves filed with

coloured epoxy grouting & cleaning the surface etc.

complete using colour & shade to be approved by

35 Providing and laying 300 x 300mm 10mm thick mett 234.00 Sqm. 1442.28

finished in flooring laid on a bed of 20 mm thick

cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with 3mm thick groove epoxy coating etc

36 Providing and laying 1200 x 600mm ceramic wall 1027.00 Sqm. 1734.17

tiles with digital prints with matt/glassy finished with

3mm Horizontal grooves filed with coloured epoxy

grouting 8mm thick in skirting and dedo on a bed of

10mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) colours, shade and design to be approved by

3 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

37 Providing and laying white glazed tiles 6mm thick in 24.00 Sqm. 964.47

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement: 3-coarse

sand) finished with flush pointing in white cement.

38 Providing and laying white glazed tiles 6mm thick in 120.00 Sqm. 1091.96

skirting, risers of steps and dedo on a bed of 10mm

thick cement plaster 1:3 (1-cement: 3-coarse sand)

and jointed with white cement slurry)

39 Providing and fixing 18mm thick black granite stone 784.00 Sqm. 3174.43

in Jambs & sills for window over 10mm (Average)

thick base of cement mortar 1:3 (1-cement : 3-

coarse sand) laid over and jointed with grey cement

slurry including rubbing and polishing etc.

40 Providing & laying both side POLISHED KOTAH 215.00 Sqm. 851.43

STONE SHELVES to C.B. with making the grooves in

the walls and fixing the kotah stone finishing the

same with cement mortar 1:2 etc. complete.

41 Providing and fixing sandwich type platform of 75cm 38.00 Sqm. 8769.83

wide and 75cm high from finished floor level using

25mm thick kotah stone slab as a base and 18mm

thick mirror polished full round edged granite slab

on top , 25mm thick mirror polished /kotah stone

supports of 75cm wide at 45cm C/C or as directed

including providing /Granite side 'Patta' of 30cm

wide on three sides of the platform and S.S. Kitchen

Sink of size 610x460x200mm of Nirali or equilant

brand as per detailed drawing and as directed.

42 Providing and fixing sandwich type platform of 75cm 10.00 Sqm. 8500.16

wide and 75cm high from finished floor level using

25mm thick kotah stone slab as a base and 18mm

thick mirror polished full round edged granite slab

on top, 25mm thick mirror polished /kotah stone

supports of 75cm wide at 45cm C/C or as directed

including providing / Granite side 'Patta' of 30cm

wide on three sides of the platform as per detailed

drawing and as directed.

43 Providing and laying 50mm thick cement concrete 1257.00 Sqm. 347.14

flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded

stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat of neat

44 Providing and mixing water proofing materials in 497.00 Per Bag 49.25

cement mortar in proportion recommended by the of

manufacturer. Kgs

45 Providing and laying broken China Mosaic Flooring 1105.00 Sqm. 779.69

for Terrace using 12mm to 20mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

crème out upto surface using white cement

including rounding off junctions and extending them

up to 15cm. along the wall, clearing with water and

oxalic acid etc. as directed.

46 Providing and fixing 35mm thick flush door of 209.00 Sqm. 4496.52

standard quality with both side laminated including

all heavy type S.S. fixture & fastenings with mortise

lock etc complete.

4 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

47 Providing and fixing decorative T.W. Door 30mm 90.00 Sqm. 4113.73

thick with existing granite or Marble Frame with

style of size 100x30mm bottom rail 100x30mm lock

rail 150x30mm of top rail of 150x30mm size with

partly 12mm thick water proof plywood and 1mm

thick lamination to both side including 20mmx20mm

teak wood and top panel with 2mm dia S.S. hollow

pipe as safety bar and PVC mosquito net with Velcro

fitting including heavy type S.S. fixtures and

fastening including French polishing etc complete.

48 Providing and fixing FRP of 28mm thick Fibre Glass 50.00 Sqm. 1560.32

shutter with 1.5 to 2.0 mm thick fire retardent grade

FRP skin in depressed panel design having extra

reinforcement on sides & edges & in Gel coat finish.

The core of the shutter is to be filled up with injected

retardent grade polyurethane foam done in situ

alongwith embedded wooden pieces for stiffening &

also taking hinges & fintures. The whole FRP frame

& shutter is to be water proof ,weather proof,

termite proof & resistance to mild acid/alkali. Rates

are to be inclusive of S.S hinges with necessary

screws & alluminium S.S fixtures & fastenings &

fastener sleeve.

49 Providing and fixing Jindal Deluxe Series Premium 71.00 Sqm. 8498.14

sliding Four track window using with 1.5mm thick

DOMAL section of any size of window as per

requirement with sliding type three shutters with

5mm thick transparent tinted float glass and one

shutter for mosquito net of SS wire gauge including

rubber beading ,PVC virgin, heavy type handle,

bearing, fixture and fastening etc. including all

labour and material etc. complete as per EIC.

50 Providing and fixing Jindal Deluxe Series Premium 116.00 Sqm. 7248.77

sliding three track window using with 1.5mm thick

DOMAL section of any size of window as per

requirement with sliding type two shutters with 5mm

thick transparent tinted float glass and one shutter

for mosquito net of SS wire gauge including rubber

beading ,PVC virgin, heavy type handle, bearing,

fixture and fastening etc. including all labour and

material etc. complete as per EIC.

51 Providing and fixing Jindal Deluxe Series Premium 38.00 Sqm. 6053.70

sliding two track window using with 1.5mm thick

DOMAL section of any size of window as per

requirement with sliding type two shutters with 5mm

thick transparent tinted float glass including rubber

beading ,PVC virgin, heavy type handle, bearing,

fixture and fastening etc. including all labour and

material etc. complete as per EIC.

52 Providing & fixing coloured anodized aluminium 15.00 Sqm. 2647.21

sectional louvered ventilator with frame size

63x38.10mm & 1.80mm thick ground glass and

coloured anodized aluminium louvers fixtures and

hold fasting etc. complete.

5 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

53 Structural steel work ( Confirming to IS 4923-1997) 38593.00 Kg. 131.82

riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting, hoisting,

fixing in position and applying a priming coat of

approved steel primer all complete as per the

structural designs and directions of Engineer in

charge.Column ( 122 x 61 x 3.6mm )

54 Providing and fixing M.S. iron ornamented gate of 2268.00 Kg. 169.68

required Patten with M.S. angle section with M.S.

square bars , fluts including providing and fixing

hold fasts , hinges roovas including one coat of

primer and two coats of oil painting etc complete.

55 Providing and fixing Colour coated corrugated /semi 247.00 Sqm. 542.37

corrugated Galvalume sheet 0.50 mm thick roofing

fixed with GI "J" or "L" hooks bolts and nets 8mm

dia with bitumen washing filled with white lead

complete excluding cost of purlins, rafters and

56 Providing 15mm thick cement plaster in single coat 5463.00 Sqm. 190.85

on Rough (Similar)side of single or half brick walls

for interior plastering upto floor two level and

finished even and smooth in Cement mortar 1:4 (1-

cement :4-sand) for all floor.

57 Providing 20mm thick water proof cement plaster 1208.00 Sqm. 327.24

for sunk in single coat on brick concrete wall for

interior plastering upto floor two level finished even

and smooth (ii) Cement Mortar 1:3 (1-Cement:3-

sand) and mixing water proofing materials of

approved brand and manufacture in cement mortar

in proportion recommended by the manufacturer for

58 Filling in foundation and plinth with brick Bats. 35.00 Cum. 625.47

Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc.

59 Providing 10mm thick cement plaster in single coat 2715.00 Sqm. 186.52

on ceiling and sofits of stair cases for interior

plastering upto floor two level and finished even and

smooth in Cement mortar 1:3 (1-cement:3-sand) For

60 20mm thick Mala Finished sand faced cement 12405.40 Sqm. 323.21

plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

61 Applying Two Coats of Birla or Asian Acrylic Lappy 8178.00 Sqm. 40.59

(Putty) and two coats of primer of approved brand

and manufacture on New Wall Surface to give an

even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

62 Wall painting (two coats) with plastic emulsion paint 8178.00 Sqm. 86.37

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

6 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

63 Finishing Wall with Weather Proof Exterior Emulsion 12406.00 Sqm. 122.13

Paint on Wall Surface (Two Coats) to give an

required shape even shade after thoroguhly

brushing the surface to remove all dirt, and remains

of loose powdered materials etc. complete

64 Providing & fixing (S.S Railing with glass,) — Side 44.00 Rmt. 5866.08

mounted, supply and installation of mobel make or

equivalent, SS 316 grade 900mm high railing made

of SS 316 grade handrail pipe of 50mm OD and

1.6mm thickness polish with automatic round

polishing machine to get a uniform hairline finish

K240 mounted with help of adjustable solid neck

support on balustrade of approved design at 900mm

centre to centre, (or actual division as per site

conditions), fitted with four Nos, solid glass

connectors for holding the infill glass of 12mm, thick

toughened and laminated, glass connector to be

fuitted with balustrade with the help of s.s screw

overall mounted on ss 316 grade solid base plate

100mm x 8mm with the hel of dash fasteners

including accessories as per detailed drawing as

directed etc. complete.

65 Providing and fixing stainless steel railing having 66.00 Rmt. 4878.30

hand rail 850mm height and of 50mm dia and

baluster 32mm dia at 90 cm C/C and 4 horizontal

pipe of 19mm dia at required spacing as per design

and SS having 304 grade and 18 guage pipe

including fastening, hold fast, clumps, coach bolts

66 Providing and fixing stainless steel railing at 850mm 129.00 Rmt. 2265.43

height and of 50mm dia SS pipe with support of

horizontal pipe as 15mm dia at required spacing as

per design and SS having 304 grade and 15 guage

pipe including fastening, hold fast, clumps, coach

bolts for fixing to wall including touching finishing to

wall etc complete.

67 Providing and fixing frame type CB shutter of 18mm 215.00 Sqm. 5226.75

thick water proof plywood with 1.00mm ISI quality

1.0mm lamination for outside of frame and

cupboard and 0.80mm thick lamination to inside of

cupboard including necessary , hydraulic type S.S.

hinges , fixtures , fastenings of standard quality S.S.

with locking arrangement etc complete as per detail

drawing and as directed by Engineer-in-charge.

68 Providing and fixing cupboard with aluminum pipe 49.00 Sqm. 9292.00

frame of size 50x25mm filled with non-teak wood

and 18mm thick water proof plywood shutter with

nos of SS basket two of size 18" x 20" x 4" , two of

size 18"x 20" x 6" and two of size 18" x 20" x 8" with

necessary intranal arragement front plywood

necessary telescopic channels for drawers and

remaining part of two shutter including 1.00mm

thick laminated sheet for outer face and 0.8mm

sheet for inner face and with 20x20cm teak wood

beading including necessary S.S. hinges and S.S.

fixtures etc complete.

7 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

69 Providing and fixing box type cupboard for 253.00 Sqm. 7549.75

wardrobe including frame work with 19mm thick

water proof plywood rear side with 8mm thick

water proof plywood and shutter with 19mm

plywood with necessary drawers of same materials

with 1.00mm thick lamination sheet for outside and

0.80mm thick laminated sheet for inside work.

including cost of all heavy type stainless steel

fittings, sliding channels , locking arrangements for

shutter and drawers including teak wood beading

etc complete as per design and drawings.

70 Providing and fixing 5mm thick glass mirror machine 77.00 Sqm. 2544.19

cut belveled edge mounted on wall with special type

wall touch SS mirror bracket fixing with necessary

71 Providing and fixing wash down water closet 32.00 No. 9408.15

(European type Wall hung) Jaquar Vignette wall

hung size of 615 x 400 x 363mm with Hydraulic seat

cover with inlet & outlet gasket, CI chair brackets

including concealed type Metropole flush valve

40mm concealed body 100mm square plate of

Jaquar or equivalent quality with Health flow set etc.

72 Providing and fixing special type wash basin on 34.00 No. 6742.76

counter top of size 610x460mm of CERA or

equivalent quality including pillar tap, Stop cock

73 Providing erecting and fixing Tripal layer ISI water 31000.00 Liter. 12.12

tank of required capacity each with all necessary

fittings , tank cover and as required connection etc.

complete on terrace

74 Providing and fixing Heavy type lang body bib tap of 66.00 No. 1103.93

Jaguar or Equivalent quality of 15mm dia etc

75 Providing and fixing 600mm x 120mm glass shelf 58.00 No. 557.47

with C.P. brass bracket and guard rail complete

mixed to wooden plug with C.P. brass screws.

76 Providing and fixing Jaquar single lever high flow 29.00 No. 13960.22

diverter with concealed body and expose parts kit of

alive or equivalent model and bath tube spout with

button attachment for hand shower and shower arm

400 x 25 x 25mm square shape for wall mounted and

hand shower for ABS plats with flexible tube 8mm

dia and 1.5Mt long with nuts and wall outlet with

shower hook and over head shower 200x300mm

stainless steel with rubbit system complete as

directed by EIC.

77 Providing and fixing Stainless steel Heavy Type 28.00 No. 1150.39

Brass Towel Rack 600mm considering & 12mm dia

rod and one 20mm dia rod including 3 to 4 pegs

including C.P. Brass Brackets etc complete

78 Providing and fixing Stainless steel Heavy Type 44.00 No. 348.45

Napkin Ring etc complete

79 Providing and fixing concealed center point to wall 58.00 Rmt. 170.35

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of 15mm dia. nominal bore tube

fittings and clamps including making good the wall,

ceiling and floor etc. complete.

8 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

80 Providing laying and jointing in true line and level 111.00 Rmt. 72.64

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

81 Providing laying and jointing in true line and level 230.00 Rmt. 91.83

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

82 Providing laying and jointing in true line and level 759.00 Rmt. 148.11

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

83 Providing laying and jointing in true line and level 200.00 Rmt. 195.66

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

84 Providing and fixing PVC pipe of 6 Kg / F / Sq.M. 169.00 Rmt. 356.53

Water pressure polythene pipe of 90mm inside dia.

high density complete including fixing by clamps to

wall including making good the wall ceiling and floor

85 Providing, laying and jointing in true line and level 1062.40 Rmt. 897.78

110mm dia U.P.V.C. SWR Type B-Pipe conforming

to IS 13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to IS :

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160mm diameter x 210mm

length x 196mm high at every 2000mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes

etc. including testing of pies and joints and jointed

with adhesive solvent cement including cost of all

9 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

86 Providing, laying and jointing in true line and level 550.00 Rmt. 834.38

160mm dia U.P.V.C. SWR Type B-Pipe conforming

to IS 13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to IS :

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160mm diameter x 210mm

length x 196mm high at every 2000mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes

etc. including testing of pies and joints and jointed

with adhesive solvent cement including cost of all

87 Providing and fixing 25mm dia Gun metal check or 49.00 No. 420.63

non-return fully way wheel valve.

88 Providing and fixing 40mm dia Gun metal check or 47.00 No. 663.42

non-return fully way wheel valve.

89 Providing and fixing 50mm dia Gun metal check or 4.00 No. 1878.60

non-return fully way wheel valve.

90 Supplying and fixing standard quality (Kranti or 4.00 No. 7105.35

equivalent) 50mm dia water meter with flange, nut

bolt etc. complete.

91 Providing and fixing PVC SWR Nahni Trap IS 14735 59.00 No. 588.26

for drain with jali of the 75mm nominal diameter of

self cleansing design with C.I. Scrwed down or

hinged grating including the cost of cutting and

making good the walls.

92 Providing and fixing S.W. gully trap with C.I. grating 31.00 No. 1292.19

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight wtih Square mouth traps size of

100mm x 100mm size P type

93 Constructing brick masonry chamber for 196.00 No. 3417.70

underground C.I. Inspection chamber and bends

with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete with Inside dimensions

455mmx 610mm and required depth for single pipe

94 Providing and fixing Pre-Cast Rubber Dye Inter 1140.00 Sqm. 707.54

locking concrete Block 60mm thick with grade of

concrete M-200 pnumatic compressed by

mechanically pressed and as per approved design

including 75mm sand layer for levelling and filling

the joint with sand in proper line and level.

95 Providing and fixing Pre-Cast Concrete Kerb Stone 416.00 Rmt. 410.41

of gray cement based concrete block 30cm. length,

30cm. height and 15cm. thick of M-250 Grade

concrete as per approved design and including

excavation for fixing in proper line and level, filling

the joint with C.M. 1:3 (1-Cement : 3-Fine Sand) etc.

10 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

96 Providing and constructing and junction chamber of 41.00 No. 2588.63

size 0.45x0.45x0.45 mt. including necessary

excavating 23 Cum. brickwall, beding CC 1:2:4, top

RCC slab, 15mm thick plaster and connection of rain

water pipes as per detail drawings and as directed

by engineer – in – charge.

97 Providing filter chamber of brick work in C.M. 1:5 of 2.00 No. 13948.10

size 2.06mt X 1.21 mt x 1.20mt and excavation

dimension of 2.66x1.81x1.35mt including C.C. 1:2:4

bed concrete of 0.15mt thick including brick work in

C.M. 1:5 for 23cm thick wall including 15mm thick

cement plaster inside and out side and 10 cm thick

RCC 1:2:4 top over with CRS steel and manhole

cover with frame of minimum weight of 35 Kg and

filling filter material Kapchi and sand as per detailed

98 Providing recharging pit of size 1.20mt dia and 2.00 No. 42356.37

1.20mt Depth of water logging with excavation filling

the pir with brick bats & sand in layerincluding

macking 300mm dia bore dpeth of 4.5mt & filling

bricks bats as per drawing as directed.

99 Providing and fixing Sign board on Alluminium 7.00 Sqm. 3467.33

Composite Pannel 4 mm thick and letter with sticker

sheet including fixing etc complete.

100 Providing and fixing special type clamping system 70.00 No. 216.14

made out from C patti, Z patti, L Clamp , U clamp

with Nut/ Bolt and washer as suitable arrangement

for water supply and plumbing system like Drainage

Line , Rain Water line and supply line for Hot and

Cold water etc line fitting from GF to 2nd Floor

required as per site condition for fixing etc

complete. (A) 15 to 40mm dia Pipe

101 Providing and fixing special type clamping system 70.00 No. 242.40

made out from C patti, Z patti, L Clamp , U clamp

with Nut/ Bolt and washer as suitable arrangement

for water supply and plumbing system like Drainage

Line , Rain Water line and supply line for Hot and

Cold water etc line fitting from GF to 2nd Floor

required as per site condition for fixing etc

complete. (B) 50 to 65mm dia pipe

102 Providing and fixing special type clamping system 80.00 No. 275.73

made out from C patti, Z patti, L Clamp , U clamp

with Nut/ Bolt and washer as suitable arrangement

for water supply and plumbing system like Drainage

Line , Rain Water line and supply line for Hot and

Cold water etc line fitting from GF to 2nd Floor

required as per site condition for fixing etc

complete. (C) 75 to 110mm dia pipe

103 Providing and fixing composite panel cladding work 52.00 Sqm. 3028.99

at front with using 3mm thick exterior composite

panel and alluminium natural anodisizing flat of

38x25x1mm with silicone grade 995 & 989 &

G.P.where it is necessary at pressure tape,baker

rod size depend

11 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

104 Drilling of 215mm dia bore hole in over burden 600.00 Rmt. 551.46

strata (alternative layer of lime stone and yellow

stridly formation) by DTH regi. up to required depth

including fixing of 175/180 dia ERW/PVC pipe if

required drilling by 165mm dia bore hole in hard

rock strata DTH drilling method up to all depth.

105 Providing and Fixing Curtain make with 100% poly fil 185.00 Sqm. 2265.43

fabric of 85 GSM (± 0.05) thickness selected by

architech & stitching and fixing with required size of

Channels arrangement and required nos of S.S.

finished support of approved shape & quality

inclusive of all necessary fixtures, fasteners and

fitting, material & all labour charges etc. complete

or as directed by EIC.

106 Providing and Fixing Wooden VIP T.V. Unit with 145.00 Sqm. 4890.42

using 19mm thick W.P. plywood in sandwiched

pattern to make the edges of the unit to be 37mm

thick with 1.0mm thick imported decorative laminate

& as per design veener clading with groove pattern

with as required width platform 50mm thick made of

ply and finished with 1mm thick full core white

laminate and as required drawers made by 19mm

thick W.P. plywood telescopic channels with other

necessary fixtures and fastening incl. of melamine

polishing work etc. complete with necessary

electric point and cable arrangements as per

drawing /photos and instruction of engineer-in

107 Providing and Supplying Wooden King Size Double 26.00 No. 35425.75

Bed of size 1.96 x 1.80 x 0.35 mtr height with using

teak wood size in outer framing and internal framing

with 19mm thick W.P. plywood & both side of 1mm

thick laminate on top and back side Head board

panelling with done by venner finish dark polishing

with groove design as per drawing or EIC. Fixing in

Back side wall with necessary fixtures and fastening

inclusive of melamine polishing work inclusive of

two nos of side box of required size with 1 nos of

drawer in each box with telescopic channel with

necessary fixtures etc. complete or as directed as

per drawing and as per instruction of architect and

engineer in charge.

108 Providing and Supplying Mattress of 150mm 26.00 No. 18816.30

thickness of size 1.96 x 1.80mt made of Kurlon

primary construction with bonnel spring core with

anti corrosive and high carbon wire finished with

super soft HR form top most layer with 100 GSM

cotton felt layer on top covered with premium

knitted fabric with edge support system with

reinforce spring support and foam encasing to avoid

sagging and edge roll off of branded manufacturer

etc. complete or as directred with Bombay Dying

double Bed Sheet 1 No, Relince Recon pillow of size

24" x 16" 2 nos with pillow cover, double bed

Blanket with cotton cover and bed runner of

Polyester & Polyester Blend etc. complete.

109 Pro. And fixing Nylon Pigeon net by fixing with SS 284.00 Sqm. 314.11

hook in Balcony, OTS, Stair etc.

12 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

110 Pro. And fixing single layer water proof gypsum 709.00 Sqm. 606.94

board 12.5 mm thick sections using water proof

board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x

3 mm with intermediate channel og size 18 mm x

mm x 0.8 mm at 1220 mm center to center ceiling

section of size 40 mm x 35 mm x 0.55 mm at 457 mm

c/c and perimeter channel A of size 20 mm x 27 mm x

30 mm x 0.5 mm at edges & drops incl.paper tap

sand sofit cleat, anchor fastener, scoch bolt

connecting cleat,joining compound top coat on

ceiling incl.making necy opening for light fitting,

diffuser etc. comp. as per detail drawing as directed

111 Making Any Size of hole or as required on site in 82.00 No. 929.20

RCC beam with core cutting for passing of drainage

112 Providing and fixing SS Wall Hook Patti (6 Nos hook) 70.00 No. 523.18

with Standard Brand size of 30cm x 5cm with SS.

Heavy Grade including fixing with S.S. screw etc

complete as directed by EIC and as per details

113 Providing and supplying premium quality 3 seater 7.00 No. 21023.15

Sofas size of 1610 x780 x 810mm made out frame

constructed with teakwood frame and 19mm thick

premium commercial plywood structure. Seat &

back & arm rest shall be finished by required

thickness high density foam (density not less than

45) this should be again covered with 30kg/sqm

density 14mm thick HR foam with Madarpat cover on

it and up holstered fabric of suggestd shade and

finish on eat, back and all visible side as per

drawing.Sofas shall be complete with all lining

material like fevicol, nails etc. with labour &

providing and fixing of leatherite/ tapestry. Legs

shall be out of wooden. Fixing of system by machine

stitches and spray gluing system. Leatherite/

Tapestry shall be as per approved colour/ shade/

texture by the Engineer in charge. Sofa shall be

finished with melamine polish and completed as per

Design detail drawings and/or given by the Engineer

114 Providing and supplying premium quality 2 seater 7.00 No. 14518.75

Sofas size of 1100x780x810mm made out frame

constructed with teakwood frame and 19mm thick

premium commercial plywood structure. Seat &

back & arm rest shall be finished by required

thickness high density foam (density not less than

45) this should be again covered with 30kg/sqm

density 14mm thick HR foam with Madarpat cover on

it and up holstered fabric of suggestd shade and

finish on eat, back and all visible side as per

drawing.Sofas shall be complete with all lining

material like fevicol, nails etc. with labour &

providing and fixing of leatherite/ tapestry. Legs

shall be out of wooden. Fixing of system by machine

stitches and spray gluing system. Leatherite/

Tapestry shall be as per approved colour/ shade/

texture by the Engineer in charge. Sofa shall be

finished with melamine polish and completed as per

Design detail drawings and/or given by the Engineer

13 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

115 Providing and Arranging Rectangle Center table 10.00 No. 5807.50

made from 1180mm x 600mm x 419mm C.P.

teakwood leg and 19mm thick plywood structure

and finished with 1mm thick laminate & top part of

table covered with 18mm thick Granite top with

edge finish All eposed sedges shall be covered with

8mm thick teak wood beading patti & exposed

wooden & veneer faces to be dinished with matt

finish melamine polish & non visible faces & edges

shall be painted with enamel paint of matching

shade of other finished surfaces including all

materials and labours etc. complete as per drawing

and instruction of engineer-in charge.

116 Providing and Arranging Cornor table made from 8.00 No. 5226.75

900mm x 900mm x 419mm C.P. teakwood leg and

19mm thick plywood structure and finished with

1mm thick laminate & top part of table covered with

18mm thick Granite top with edge finish All eposed

sedges shall be covered with 8mm thick teak wood

beading patti & exposed wooden & veneer faces to

be dinished with matt finish melamine polish & non

visible faces & edges shall be painted with enamel

paint of matching shade of other finished surfaces

including all materials and labours etc. complete as

per drawing and instruction of engineer-in charge.

117 Providing and supplying Dinning table Size :- 2.00 No. 22649.25

1800mm x 900mm x 750mm top 50mm thick MR

grade plywood with 1.00 mm thick full core white

laminate & edge of table on both side 9cm wide

veener finish. Teak wood Leg frame to made from

x 45 mm size of Teakwood with 18mm thick Granite

top with finish edge with melamine polish. including

all materials and labour etc. complete as per

drawing /photos and instruction of engineer-in

118 Providing and supplying wooden dining chair size 12.00 No. 4123.83

584 x 470 x 958mm with using indian teak wood size

in frame, support and legs with 12mm thick W.P.

plywood in seat portion and 6mm thick W.P.

plywood in back portion with 75mm thick 45 Density

"HR" foam in seat and 50 mm thick "HR" foam in

back portion with tapestry cover with necessary

other materials inclusive of melamine polishing etc.

complete as per drawing /photos and instruction of

engineer-in charge.

119 Earthwork for embankment including breaking 55529.00 Cum. 182.14

clods, dressing with all lead and lift and including

watering rolling and consolidation of subgrade in

layers at O.M.C. to required dry density including

filling the depression which occur during the

process using power roller 8T to 10T.(E) From

Borrow area within all lead.

120 Providing and laying compacted W.B.M. 150mm 376.00 Cum. 971.62

thick of grade-II in two layers each of 75mm thick of

machine crushed BT metal of size 40mm to 63mm

with using 13% stone screenings of 13.2mm size and

7% stone dust as filler including spreading watering

and consolidation by vibratory roller etc. comp. in

14 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

121 Providing and casting in situ controlled trimix 376.00 Cum. 7070.00

cement concrete M-250 for average 200mm thick

road work laid as directed including adding super

platisizer admixture of IS make and providing and

laying M.S. side rail of road thickness with

necessary nut bolts plates fixing as per width

applying plate vibrator (electric or diesel) on

channel compressor with vacuum dewatering

system by using all necessary equipments and

materials and machinery such as running screed

vibrator on prelaid M.S. channel for leveling

,Vacume pump, floating and power towelling etc

with filling the joints with bitumen as directed etc

122 Painting lines, deashes, arrows, letters etc on 229.00 Sqm. 59.17

roads, Air fields and like in two coats with road

marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign matter for

123 Providing and fixing retro Reflective Prismatic 4.00 No. 12310.89

grade Board using 2mm Aluminum / 4mm ACP,

angle iron 75 x 75 x 6mm. Descaling and degreasing

the board as per requirement using epoxyprimer

epoxy paint and carrying retro reflactive process by

screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary

excavation curing etc. complete as per I.R.C 67-

2012 design. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall

be submitted by contractor. (A) Class -C Type-

11(NH/SH) retro reflective sheeting

124 Road marking with hot applied thermoplastic paints 224.00 Sqm. 367.72

with reflectorising glass beads on bitumin surface

providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising

glass beads @ 250gms per sqm area, thickness of

2.5mm is excluding of surface applied glass beds as

per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta

/bump patta lane/center line/ edge line/cut patta. The

white color marking should provide liminance

coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day

time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity and

skid resistance as mentioned in the section-15 of

IRC 35-2015. Warranty for the Retro reflectivity

should be two years.

15 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

125 Cat Eye / Road Stud / RPM: Supplying Raised 137.00 No. 217.40

Pavement Markers made of polycarbonate and ABS

moulded body and reflective panels with Micro

prismatic lens (No Glass bead lens) capable of

providing total internal reflection of the light

entering the lens face and shall support a load of

13635 kgs. tested in accordance to ASTM D

Type H and complying to Specifications of Category

A of MORTH Circular No RW/NH/33023/10-97 Ð DO

III Dt 11.06. 1997. The height, width and length shall

not exceed 20 mm, 130 mm and 130 mm and with

minimum reflective area of 13 Sqcm on each side

and the slope to the base shall be 35 +/- 5 degree.

The body of the marker should having finger grip for

easy and accurate placement and application with

epoxy / bituminous Adhesive as recommended by

the manufacturer of the marker. The color of the

marker should be as per the IRC 35-2015 and as

directed by Engineer-in-charge.

126 Solar Stud: Supplying of Solar Raised Pavement 30.00 No. 2088.68

Markers made of polycarbonate molded body with

circular shape, solar powered, LED self illumination

in active mode, 360 degree illumination and

reflective panels with micro prismatic lens capable

of providing total internal reflection of the light

entering the lens face in passive mode. The marker

shall support a load of 20000 kg tested in

accordance to ASTM D 4280. The marker should be

resistant to dust and water ingress according to IP

65 standards and should withstand temperatures in

the range of 0 C to 70 C. Color of lighting could be

provided in red or yellow (amber) as per

requirement and typical frequency of blinking is

Hz. There should be current losses of less than

micro-amperes at 2.4 V in sleep-charging mode to

enhance the life of the marker and a full charge

should provide for a minimum autonomy of 50 hours.

The height, width and length of the marker shall not

be less than 10 mm x 100 mm x 100 mm. Also, the

surface diameter of the marker shall not be less than

100 mm respectively. The weight of the marker shall

not exceed 0.5 Kilograms. Fixing will be by drilling

holes on the road for the shanks to go inside,

without nails and using epoxy resin based adhesive

as per manufacturers recommendation and

complete as directed by the engineer

127 Providing & fixing stainless steel (stainless steel 104.00 No. 1515.00

plate of 302 No. ) letter of 45c.m. size finished with

radium sticker including necessary scaffolding for

fixing with epoxy material etc. comp. as directed by

engineer in charge (Additional Article of Gujarati

letter are consider as a half letter)

128 Providing & fixing stainless steel (stainless steel 4.00 No. 3232.00

plate of 302 No. ) monogram (shinh stambh) finished

with radium sticker of 60cm size including

necessary scaffolding for fixing with epoxy material

etc. comp. as directed by engineer in charge.

16 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

129 Providing and fixing cattle trap of required size and 35.00 Sqm. 9072.83

design by providing GI pipes 50mm dia at 10 cm c/c

including providing “c" chanels 100x50x6x6mm size

including necessary excavation 10 CM thick CC

1:2:4 for foundation complete CC wall of CC 1:3:6

with cement plaster 15mm thick in CM 1:4 etc.

complete as directed by Engineer – in – Charge.

130 Preparing the existing land /soil and removal of 1480.00 Sqm. 24.74

unserviceable soil, stone ,unwanted vegetation and

disposing of the same as directed.

131 Preparing the land by filling fertile/ selected garden 1480.00 Sqm. 77.77

soil, including leveling & fine dressing and mixing

manure/bio tech fertilizer/ fertilizer and termite

treatment as per requirement.

132 Plantation of carpet type lawn including labour 1480.00 Sqm. 57.57

materials , watering and growing etc. as per

instruction of EIC.

133 Plantation of flower bed with selected flower plant 148.00 Sqm. 232.30

including planting the same at 45 CM apart and

growing the same including as per instruction of

134 Planting of hedge with selected hedge plant like 257.00 Rmt. 154.53

Golden , Duranta, Red Bhaji or selected plant @

CM apart as per instruction of EIC.

135 Planting of selected shrubb trees like Ticoma, 100.00 No. 64.64

Nerium or other selected plant including preparing

pit of size 30 x 30 x 30 CM and filing with selected

garden soil including manure, fertilizer and as per

instruction of EIC.

136 Providing Three plants having minimum 2.00 mt. 400.00 No. 64.64

hight and healthy growth of various kinds as like

peltroform, Gulmahore, Karanj, Ambla, Rain tree,

Sapparni, Cherry, Cryjeliya, Spethodiya, Paras

Pipala, Garmali, Neem, Borsalli, Kadam, Buch,

Chanpo, Asopalav and as suggested etc.

137 Providing tree plants having minimum 2.00 mt height 50.00 No. 1742.25

and health growth of bottle palm tree, Cycus palm

and other palm tree planting including 30 x 30 x

Cm. pit filling with selected garden soil including

manure, fertilizer as per instruction of EIC.

138 Providing and fixing Precast Garden three seater 20.00 No. 3484.50

bench size of 4.50 Feet with back rest as per

Design drawing including fixing on site as EIC

139 Constructing hexagonal Gazebo by using necessary 6.00 No. 226339.99

excavation for foundation of MS. Structure framing

brick work , plaster work & weather proof paint and

1mm thick Galvalume Sheet roofing as per required

shape, Kotah Stone flooring , kotah stone slab type

55cm wide seating arrangement with necessary

support of 25mm thick kotah stone vertical support

and in centre 120cm dia kotah stone table with four

nos vertical support with finished edge and in

periphery 0.60mt height wall with required pattern

with including plaster and exterior paint etc

complete for all required material , labour etc work

carried out as per drawing & instruction by EIC.

140 Supply & Installing of ABC Type - 6 Kg, Capacity 30.00 No. 2756.29

Fire Extinguisher as per IS -2171 ISI - mark , with

necessary Fittings etc. complete.

17 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

141 Supply & Installing of Gas Co2 Type–4.5 Kg.. 30.00 No. 6398.35

Capacity Fire Extinguisher as per IS And ISI - mark

, with necessary Fittings etc. complete.

Total of Civil Items (A) Rs.

(B) Electrical Work

142 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 552.00 Pt. 410.06

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (j) in existing pipe erected concealed in

wall/ceiling complete. Cat. III

143 (j) in existing pipe erected concealed in wall/ceiling 114.00 Pt. 205.03

complete. Cat. III (For point wiring in bathroom and W/C

and washbasin area in residential quarters reduce overall

rate by 50% of point wiring for light.)

144 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 83.00 Pt. 556.51

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity

of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed. (j) in existing

pipe erected concealed in wall/ceiling complete. Cat. III

145 Point wiring for Individual Plug with & earth wire of 1.5 77.00 Pt. 425.21

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.[I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board.(j) in existing pipe erected

concealed in wall/ceiling complete.Cat. III

146 [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. 92.00 Ea 567.62

Wire from mcb db board. (j) in existing pipe erected

concealed in wall/ceiling complete. Cat III

147 Point wiring for on board Looped Plug with 6A Modular 296.00 Ea 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules

erected on / in wall / ceiling with following type

accessories Cat. III

18 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

148 Point wiring for Two Way Controlled Light Point with 2-1.5 83.00 Ea 514.09

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling

rose or H.D.Connector as directed.(j) in existing pipe

erected concealed in wall/ceiling complete

149 Providing following type of Modular Type Accessories 12.00 Ea 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket [A] For One Gang Cat.III

150 (4) TV Co-axial Socket outlet Cat.III 20.00 Ea 160.59

151 (5) Electronic hum Free steps EME Fan regulator Cat.III 33.00 Ea 398.95

152 (7) Blank Plate Single Cat.III 122.00 Mtr. 25.25

153 (10) 16Amp. Universal socket.Cat.III 38.00 Mtr. 199.98

154 (14) 16A Double Pole Modular MCB Switch Cat.III 38.00 Mtr. 410.06

155 Providing and erecting ISI mark Medium class RIGID PVC 5469.00 Mtr. 24.24

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed.

157 Providing and erecting Mains with 1.1 KV grade FRLS 1886.00 Mtr. 62.62

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size. (E) in existing

pipe. (b) 2 wire 2.5 sq. mm

158 providing and erecting Mains with 1.1 KV grade FRLS PVC 1623.00 Mtr. 86.86

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. (E) in existing pipe. (a) 2 wire 4 sq. mm

159 (E) in existing pipe.(b) 2 wire 6 sq. mm 162.00 Mtr. 121.20

160 (E) in existing pipe.(h) 4 wire 6 sq. mm 363.00 Mtr. 240.38

161 providing and erecting Mains with ISI marked, 1.5KV 64.00 Mtr. 12.12

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required.(a) One wire

162 (e) One wire 6.00 sq. mm 28.00 Mtr. 56.56

163 (f) One wire 10.00 sq. mm 156.00 Mtr. 91.91

164 (h) One wire 25.00 sq. mm 16.00 Mtr. 236.34

165 Supplying and erecting Flexible PVC insulated multi 279.00 Mtr. 46.46

strand multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. (e) 1.50 Sq.mm

core round PVC sheathed

166 Providing & Erecting approved make following size of TV 496.00 Ea 39.39

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary

conductor made of poly - Aluminium film bonded Al.

Braids @ suitable coverage overall sheathed with black

PVC insulation. (b) RG-6

19 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

167 Supplying & erecting approved make Telephone Cable 353.00 Ea 40.40

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With

necessary connections.[A] Conductor Size 0.5 mm.(a)

Unarmoured.(4) Five Pairs

168 (b) Armoured [Jelly Filled].(1) Ten Pairs 91.00 Ea 125.24

169 Providing & erecting main Distribution (MDF) indoor type, 2.00 Ea 994.85

back mounted frame as per DoT standard approved with

krone strips.(a) Suitable for 10 pair

170 Bakelite adopter for Holder to be erected. 118.00 Ea 9.09

171 Providing & erecting Switch board for Computer or 2.00 Ea 1133.22

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front plate,modules

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.3 nos. 6A

Switch 3 nos. 6A 5 pin Plug For Modular Type Accessories

172 Decorative call bell Ting-tong box type 250 volts complete 14.00 Ea 71.71

173 Supplying and erecting LED indoor fittings with LEDs of 12.00 Ea 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver

efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat-lll

174 Supplying and erecting LED indoor fittings with LEDs of 106.00 Ea 535.30

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-

20 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

175 Supplying and erecting LED indoor fittings with LEDs of 405.00 Ea 427.23

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT

3000 K to 6500K,Luminaire efficacy> 85 lumens/watt ,LED

driver efficiency > 85 %(fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the

ranges shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for

spring loaded mounting clips complete.IP20.(ii) 15 watts,

Surge-2 KV Cat III

176 (A) Square/ Circular shaped Surface/Recessed Mount 30.00 Ea 758.51

Downlight with provision for spring loaded mounting clips

complete.IP20.(iv) 22-24 watts, Surge-2 KV Cat III

177 (B) LED Panel Light with provision for Plane front frame 8.00 Ea 2091.71

with translucent cover fixed to housing complete.IP20 (vii)

from 45 to 48 watts, 24" x 24", Surge-2 KV Cat-lll

178 (G) Step Light having Aluminium die cast and ABS Plastic 40.00 Ea 573.68

material.(i) 5 watts, Direct/Indirect luminaire.Cat III

179 (H) Mirror Light 9 Watts, wall mounted minimum 1 feet 32.00 Ea 312.09

180 Supplying and erecting LED street light / Flood light 24.00 Ea 4997.48

fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K

to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage

protection. (ii) 50 to 60 Watts.Cat III

181 Supplying and erecting LED street light / Flood light 28.00 Ea 5976.17

fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K

to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(A) Street

Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage

protection. (iii) 90 watts Cat III

21 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

182 (B) Flood Light (IP-65), Surge protection -4KV integral 12.00 Ea 5599.44

and ,Light must have 440VAC line supply with over-

voltage protection. (ii) 50 to 60 Watts.Cat III

183 (B) Flood Light (IP-65), Surge protection -4KV integral 6.00 Ea 9647.52

and ,Light must have 440VAC line supply with over-

voltage protection. (vi) 200 watts Cat-lll

184 (C) Post Top Lantern LED fitting comprises of finish cast 4.00 Ea 4819.72

aluminum spigot and spun aluminum canopy fixed with

opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal

block.IP 65 (ii) 40W Cat-lll

185 Providing and erecting Approved make Four pole 8.00 Ea 6173.12

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up to

63 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only Cat

186 Pproviding and erecting Approved make Four pole 16.00 Rmt. 6790.43

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up to

63 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only Cat

III Note:-1 Add Rs. 10% extra for housing/Encloser of

MCCB for Item No 3-4-1 to 3-4-12 (The Enclosures should

be used of same company of MCCBs to be used)

187 Providing and erecting Approved make Earth fault Relay 6.00 Ea 4687.41

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete

erected in existing M.S.housing.. (1) 63 A -100 A , CT

188 Supplying & erecting approved make Four Pole 415V 4.00 Ea 2611.86

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for.(A)

189 Supplying and erecting triple pole & neutral 440V / 500V 3.00 Ea 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence

of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with

necessary connections. (A) Suitable for 100 Amp.

190 providing and erecting Miniature circuit breaker single 66.00 Ea 270.68

pole 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with

ISI Mark.Cat III

191 providing and erecting Miniature circuit breaker single 292.00 Ea 112.11

pole 10A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

192 Providing & erecting 240 V MCB double pole switch for 21.00 Ea 295.93

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity. (B) 40 Amp. Cat.III

193 Providing & erecting 415V MCB Four Pole Switch for 5.00 Ea 638.32

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (b) 40 Amp. Cat iii

22 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

194 Providing & erecting 415 V MCB Four Pole for Motor & 32.00 Ea 668.62

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (b) 40 Amp. cat-III

195 Providing & erecting 415 V MCB Four Pole for Motor & 10.00 Ea 737.30

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (c)63 Amp. Cat.III

196 Sheets steel powder coated enclosure suitable for 3.00 Ea 176.75

incorporating One/Two nos. MCB.

197 Providing and erecting Sheet Steel powder coated MCB 2.00 Ea 1492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for(A) single

phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv)12 way

198 Providing and erecting Sheet Steel powder coated MCB 3.00 Ea 1680.64

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43)(v) 16 way

199 (B) three phase incoming and single phase horizontal type 5.00 KG. 2339.16

outgoing Per phase isolation type (PPI) (b) sheet steel

double door (i)4 way

200 (B) three phase incoming and single phase horizontal type 10.00 KG. 2913.85

outgoing Per phase isolation type (PPI) (b) sheet steel

double door(ii)6 way

201 providing and erecting Approved make RCCBs 50.00 Ea 2235.13

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component.

for following Max. rating erected as directed (ii) 40Amps.

202 Providing and erecting required size Copper strip for 50.00 Ea 794.87

earthing of H.T. OCB / ACB/ Transformer, LT panel board,

Motors etc. using copper clamp.

203 Providing and erecting Annealed bare Copper wire 8 to 12 30.00 Sq.Mtr. 794.87

23 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

204 Supplying & erecting earth pit of minimum bore 15.00 Sq.Mtr. 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must

be submitted by Agency. (a) For Electrical Installation up

to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

205 (c) For Electrical Installation covering Transformer 5.00 Mtr. 8636.51

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

206 Providing & erecting weather proof, dust & vermin proof, 4.40 Mtr. 14902.55

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of supplied switch

gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket, heavy duty

end terminal connection, danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains

& Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size. (B) The standard

companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

207 Providing and erecting Steel cover as per drawing using 1.80 Mtr. 4228.87

16 SWG M.S.sheet of following depth, to house the switch

gear etc. complete with locking arrangement and lock

with duplicate keys per cupboard and door handles

erected with necessary support and painting. [One coat

red oxide and two coat enamel paint] (A) with angle iron

frame (ii) For 40 cms. Depth

24 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

208 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 530.00 Mtr. 126.25

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (B) 4 core 6 Sq.

209 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 165.00 Mtr. 153.52

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (A) 4 core 16 Sq. mm

211 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 153.00 Mtr. 676.70

cable multistrand Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe at road crossing or floor of following size of cables.

(A) 4 core 10 Sq. mm

212 Making trench in soft soil of suitable width of 90 cm deep 205.00 Ea 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

213 Making trench in Hard Murrum / Tar Road of suitable 94.00 Ea 74.74

width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

214 Providing & laying approved make Double walled 485.00 Ea 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia

215 Providing and, fixing heavy duty flange type brass cable 90.00 Ea 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (B) 2 to 4 core 6 Sq. mm

216 (D) 2 to 4 core 16 Sq. mm 7.00 Ea 47.47

217 (E) 2 to 4 core 25 Sq. mm 9.00 Ea 51.51

218 Solder less crimping type Aluminium lugs conforming to 64.00 Mtr. 15.15

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

219 Solder less crimping type Copper lugs conforming to IS 16.00 Ea 10.10

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner.(B) 10 Sq.mm

220 Providing & erecting Approved make Power Saving 50 112.00 Ea 1948.29

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

221 Supplying and erecting 19 / 20 mm. nominal bore Medium 57.50 Ea 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

222 Supplying & erecting fan hook box of 10 mm M.S. round 112.00 Ea 108.07

bar bounded to the RCC bars up to 50mm length each

side and pierced through a 16 Gauge M.S. box / Heavy

Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

223 Providing 2.5mm.thick laminated acrylic sheet to cover 112.00 Ea 18.18

the fan hook or Fan box.

25 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

224 Supplying & erecting approved make low noise 42.00 Ea 1366.53

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame.250mm with 1350 RPM

225 Supply of approved make frp/grp pole having followiing 10.00 Ea 16640.76

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having minimum

glass content 45.0%.The pole should be in one pieceand tapered

round in shape,having smooth outside surface finish and should

be totally fre from corrosion as well as non conductive and

shock proof. Pole should be provided

with FRP/GRP base bracket dully fabricated from metal(M.S) and

dully claded with FRP/GRP material to avoid any metal exposer

and painted with PU paint.

Pole should mechanical properties i.e 1. Specfic gravity (ASTM D

792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight (ASTM D 2584)

45.0 ‐55.0%, 3. Water absorption (ASTM D 570)

<0.5%, 4. Tensile Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural

strength (ASTM D 790) 250+/‐50Mpa, 6. Compressive Strength

(ASTM D 695) 200+/‐50MPa, 7. Yeild Strength(ASTM D638)

+/‐50MPa. Pole should be flame retardant as per IS 6746.Resin

used shall be UV resistance and pigmented. Pole should be

painted with first coat of epoxy primer and then two coat of

weather resistance polyurethen paint to ensure proper

addhesion of the paint.Minimum thickness shall be 80 to

micron.Defelection of the pole shall not exceed more than

10.0 % of the length of the pole for the given load.Pole should be

generally made as per the dimensional data,performance

criteria and some interchagebility features of poles

as per the standard ANSI C123.20 latest version of ASTM D

923/01 including cable termination box with necessory

accessories.The size of pole and type of installation with

foundation , Anchor Base & Internal junction box as per the

manufacturer details and site requirement . (1) 'A' class frp/grp

pole suitable for base plate mounting

[E] Overall Length of 7.0 meter, Average thickness : 6mm,

Top/Bottom Outside Dia. 76/193mm +/‐2.Weight of Pole

25.0 Kg approx. (Without base) Metal Anchor Base dully

frp claded (Size : 355 Ø * 14mmthk , Mounting hole PCD

300mm * 6 nos. of 20 Ø hole)

226 Providing FRP/GRP arm bracket of having 15˚ arm with 50 10.00 Sq.Mtr. 1900.82

mm OD pipe *5 mm thk,1000mm long from pole centre (A)

Single arm bracket

227 Supplying & erecting approved make SMC press 56.00 Ea 476.72

moulded composite FRP. loop-in, loop-out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors

as per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of

following size of box. (C)150mm x 125mm x 100mm [deep]

228 Supplying and erecting B class Galvanized iron pipe 80.00 Ea 215.13

having smooth finished bore of the pipe on both ends

erected nuts and bolts along the pole / wall shaping the

pipe as per site requirement. Pipe dia as following.(B)

229 Supplying and erecting HYLAM sheet on existing angle 1.80 Ea 1156.45

iron frame.for following thickness (C) 6mm

26 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

230 Supplying & erecting approved make Digital time switch 5.00 Ea 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

231 Supplying & erecting power contactor ,AC3 duty for time 5.00 Ea 2782.55

switch complete erected as per direction Cat III (D)

pole 440V 40 Amp.

232 Supplying, erecting, testing, commissioning approved 1.00 Ea 141616.14

make M.S. Polygonal High Mast Pole having following

general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms

BSEN 10025 & Hot deep galvanized minimum 65/86

micron (as per IS 2629 /1985) Lantern carriage with ring

and rubber lines for erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia

S.S. Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lightening

arrestor = 1 No. with necessary wiring of 2.5 sq.mm

core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible

motor and switchgears having door not more than

1400mm x 300mm with waterproof gasket & hinges &

locking arrangement.

(f) Pole structure comprises suitable size of reversible

motor, cable and necessary switchgears with control

panel. (g) bottom section shall have suitable size of

thickness supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS

including testing & commissioning of the entire structure

for following size of High Mast poles

[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F

360mm, No. of Sec. No. - 1, Bottom Thickness - 3 mm, Size

of Base Plate - Dia 520 mm x 20 mm thick, Foundation Bolt

Size M24 x 850 mm, Qty - 6 Nos., Suitable for mounting

Fitting of Light - 6 Nos.

27 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

233 SITC of Digital / PCM / TDM EPABX System having SMT 2.00 Rmt. 45398.49

design, system with flexible universal slots. Inbuilt Auto

attendant facility, Minimum 15 Nos. conference, Analog

extension line, Calling GSM, E&M line, PRI / EI & VOIP

program me through Analog telephone digital key from

Ethernet, public address cord, shall have unrestricted

simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking,

Class of Service, Quick Dial-Single Digit dialing of any two

external number, Once only ring device, Chairman /

Secretary - Do not disturb Facility, Power Down Mode,

Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call

Back, Barge-in, Call Pick Up & Call Transfer, Call transfer

while Ringing with Voice Guide System, (DISA), Caller ID

(CLI), CLI Base ECF, CLI Base routing Internet Ready

Port, External Music Port, Call Budgeting, Call Most

Calculation (ASMDR), DID Direct Inverse Dialing, External

Music Input, Fax Homing, Global Directory Printing with

following capacities [[Approved by Competent Authority

i.e. not Below the rank of Executive Engineer ] [A] No of

Extension 16, No of Junctions 6, 8 Port IP Resource in-

built, 4 Port Web base Video Conferencing, No of

expandable ports : 48, Operators Console - 01 Compatible

234 Supplying & erecting push button type telephone 12.00 Mtr. 898.90

instrument having speaker phone Caller ID & speaker

phone with one touch memory (min.6 nos.)& 99 memories

with display system Single line [[Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

235 Providing and erecting Inverter based approved make 14.00 Ea 56353.96

split air-conditioning unit consisting of condensing unit

with variable speed fan motor, inverter type hermetically

sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and

blower motor with its accessories by means of extra

supplied proper insulated copper tubing,drain PVC pipes

suitable for ( cost includes Eco Friendly green gas

charging and 15A plug top & Remote Control & MS Stand)

with necessary core cutting. (1)For ISEER Range

(KWH/KWH)(3.5 to 3.99) (C) for 1.7 to 2 ton capacity -

Premium Cat.(O-General, Mitsubishi electric)

236 Supplying and erecting insulated pair of soft copper 638.00 Ea 965.56

tubing open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up

to 4 TR capacity

237 Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm 561.00 Ea 129.28

thick.nitrile rubber insulation.(A) 50 mm dia.

238 Supplying and erecting horizontal / vertical mounting type 27.00 Ea 9513.19

storage water heater with copper container housed in

M.S./S.S./ABS body insulated with glass wool/puff

complete with heating elements,adjustable thermostats

300C to 850C, indicating lamp, safety valve, fusible plug,

etc.complete erected with coach bolts, nuts. washers &

cementation.(B)15 Ltr-.with 2 /3K.W. heating element

Premium Category (Racold,A.o.Smith,Venus)

239 Supplying and erecting approved make panel mounting 6.00 Ea 1275.63

type Digital Voltmeter having 3 digits LED display, 0 to

750 AC Volts range erected on existing panel board with

all connection, wiring etc .with manufacturers calibration

28 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

240 Supplying and erecting approved make panel mounting 6.00 Ea 1558.43

type Digital Ammeter having 3 digits LED display,

external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc .with

manufacturers calibration certificate.

241 Supplying and erecting Ammeter / Voltmeter selector 12.00 Ea 317.14

switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections.

242 Providing & erecting L.T. Current Transformer with bar 18.00 Ea 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

243 Supplying and erecting approved make suitable panel 18.00 Ea 43.43

indicator LED type lamp, lens cover, complete erected

with necessary connections.

244 Providing & erecting open well horizontal mono block 4.00 Ea 15707.52

pump set with cast iron body, complete for three phase

submersible motor having. [C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to

270 LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm

dia delivery pipe Cat.II

245 Providing & erecting open well horizontal mono block 4.00 Ea 18746.61

pump set with cast iron body, complete for three phase

submersible motor having. [D] For 5 HP 3 phase open well

horizontal mono block pump set suitable for 1350 LPM to

310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia

delivery pipe Cat.II

246 Supplying & erecting approved make motor control 12.00 Mtr. 7722.46

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps for R- Y -

B phases, overload relay, Automatic water level

controller, Ammeter, Voltmeter each with two way

selector switch incoming, wires duly socket crimped,

main contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted on

wall as directed. The isolator, overload relay & contactors

will be of L & T, Siemens or BCH make only.(A) DOL up to

247 S.I.T.C. submersible pump set suitable for bore of 100 4.00 Ea 26894.28

mm. dia. or more having three phase motor capacity

H.P. with following capacity . Lifting and Lowering taken

extra.(A) (25 stage) 120 to 125 LPM discharge at 155 to

120 mtrs. head respectively suitable for 50 mm dia.

delivery pipe.Cat III

248 Lowering of submersible motor pump set at the depth of 4.00 Rn.Mtr. 2996.67

following ,complete with required. Nos. and size of casing

pipes erected by means of proper chain pulley block &

pipe wrenches after checking of threads of each pipe with

coupling to take the load of the pump set and pipe

assembly filled up with water.(C)Above 120 mtr.

249 Providing and erecting ISI marked PVC insulated PVC 725.00 Ea 146.45

Sheathed Flat flexible Submersible copper cable

approved make of following Size. (C) 3 Core x 4 Sq. mm

250 Providing Water proof straight Joint in PVC insulated flat 12.00 Ea 278.76

flexible copper cable by using insulating material, water

proofing material, & making the joint complete. (B) 16 to

251 Supplying of following size of HEAVY UPVC column pipe 428.00 Rmt. 359.56

with coupler and wire lock [B] 50 mm dia

29 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

252 Supply of following size of TOP & BOTTOM accessories 4.00 Ea 1489.75

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe

as directed by Engineer - in - charge with necessary

plumbing as desired.[D] 50 mm dia

253 (A) GENERAL DESCRIPTION OF LIFTS. 1.00 Ea 1235286.56

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High

Starting torque Lift 3 phase 440 V A. C. Permanent

Magnet Synchronous motor of proper rating with high

efficiency shall be used.

[2] Micro processor based / PLC, ACVVVF, vector control

drive with encoder feedback closed loop system shall be

used for lift car and door operation which shall be full

collective selective operation hall call demand response,

UP/DOWN hall stops, Main, Up/ Down Contactor with

overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size

and to sustain the impact load cabin + passenger with

safety factor of fire for steel and side panels of Stainless

steel of sheet of grade 304 duty. Car ceiling will be S.S.

finishes with aesthetic appearance with LED ceiling

lights. Car flooring shall be of s/s 304 chaker plate design

sugeested of engineer in charge. of engineer in charge.

Car doors shall be of stainless steel grade 304, hairline

finish with centre opening / telescopic automatic doors.

Car panel will also be S.S. 304 finished with emergency

stop device, mechanical door safety device, facility of

auto/ attended mode. All car panel buttons and all floor

switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be fully

automatic centre opening/ telescopic opening made of hairline

finish steel grade of 304 with key holes and infrared curtains

with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car

along with alarm switch shall be provided. Also, Emergency

Light & Fan should start immediately without any Time Delay as

soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along

with floor position indicator shall be provided inside the car and

[7] Full height infra red curtain with multiple cross / crossing

light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided

accordingly of passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading

shall be provided such that doors kept open till excess load is

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep

timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in

[13] Self diagnostics system for operational and safety

parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor calibration

as per actual site parameters and submission of calibration

certificate submission, door key holes in the floor doors, fireman

switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room

and monkey ladder for lift pit should be provided by the lift

agency, along with the other steel structure works, foundations

for the machine etc…

[16] In the hoist way fascia plate shall be provided without any

extra cost, where ever required as / if directed by engineer in

30 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

[17] Permanent wiring with necessary safety devices like

RCCB in all circuit, Over Voltage Under Voltage

protection and THD eliminator in circuit for lift machine

room and lift well with proper numbers of light points,

with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall

be made available by department in lift machine room.

Necessary Earthing as per Lift Act/Rules shall be

arranged by Lift Agency.

[18] Any civil/ electrical works for additional and

alteration in lift shaft and machine room related to

erection of lift shall be made by lift agency without any

extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and

documents and liaison services for obtaining all

necessary permission from lift inspector and other

[20] acrylic transparent licence/display A4 size holder in

[20A] As per statutory requirement of Govt. Of Gujarat lift

& escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift

erection and provide report by third party authorized by

concern licensing authority

5.agency has to provide third party insurance upto

completion of free maintenance period and submit the

document for the same.

[21] Car Panel Operating Buttons with floor position

indicator/buttons must be of Auto Glow type clearly visible when

view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of

hairline finish steel grade of 304 should be provided at

appropriate height on the Rear & Side Wall Panels in Lift Car.

[23] With Necessary KVA rating voltage controlled Stabilizer

suitable for your controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is

in scope of work which rating is sugested by CEICED

Department (electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM

category 1. Advanced control system dual 64 bit embedded

microprocessor with CANBUS Serial Communication mode

including Regenerative power efficient operation,on site

programming facility, Anti nuisance, Pte-opening, BMS/RMS with

necessary online real time monitoring system having necessary

connectivity for remote monitoring & other suitable supporting

hardware & software devices to fulfil the purpose.2. Floor

Indication LCD Display with call registration & brail mark with

arrival gong and hall lantern & TFT Screen in the car with MP3

Voice Announcer.3. CAR Panel should be Scratch resistive SS

Moonrock finish / Hair Line / Honeycomb for car and all Doors,

All landing doors must have fire rating up to 2 hours and car

door must have multi-level crisscross beam door protection.4.

To & fro communication system & wiring (i.e. car , control room

& guard room ) and Each elevator are equipped with remote

monitoring system.agency has to provide mobile app and user

id and password for monitoring 4/5/6 Passengers, Ground plus

upper floors with Rated Speed of 1.0 m/sec. (C) With General

PLUS ADDITIONAL SPECIAL FEATURES attached herewith.

254 4/5/6 Passengers, Ground plus 3 upper floors with Rated 1.00 Ea 1317217.76

Speed of 1.0 m/sec.,(C) With General PLUS ADDITIONAL

SPECIAL FEATURES attached herewith. Prem. Cat.

31 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

255 Supply, Installation, Testing & Commissioning of following 90.00 Per KW 42156.39

size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material :

Anodized Aluminum alloy Frame With Twin Wall Profile,

Front Cover : High Transmission Low-Iron Tempered

Glass (AR Coated), High efficency and positive power

tolerance Pmax: 0/+5, Module Efficiency should be

approx. 19.5%-22%, Normal operating temperature 45'C,

Junction Box with Waterproof IP67 & MC4 Compatible and

Enclosed with Bypass diodes, 100% Electroluminescence

test to ensure error free Modules, Thep. temp. co-efficient

of the PV module shall equal or better than -0.45%/degree

C. Solar PV modules of minimum fill factor 75% to be

used. Unit Production:- More than 4.5 Unit /kw /day

(Actual)(1Year Avg) With 10 year Product warranty and

year Linear Power Warranty

includes all mechanical and electrical parameters of the

Solar panel. Modules must be complied to the

DCR(Domestic content requirements). The Ration of AC to

DC is 5:6 for the Installation capacity which are given in

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V

Max efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz,

Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P

THDi: <3%, Operating Tempreture Range: -25~60°C,

Integrated protection of Inverter are Anti-islanding

Protection, Input Reverse Polarity Protection, Insulation

Resistor Detection, Ground fault protection, Residual

Current Monitoring Unit, Output Over Current Protection,

Output Short Circuit Protection, Output Over Voltage

Protection, PV array string fault Protection. Protection

Degree: IP65, User Interface LCD & APP, Datalogger &

Communication: GPRS / Wi-Fi.

Integrated, Input Reverse Polarity Protection Integrated,

Insulation Resistor Detection Integrated, Residual

Current Monitoring Unit Integrated, Output Over Current

Protection Integrated, Output Short Circuit Protection

Integrated, Output Over Voltage Protection Integrated,

Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module

Mounting Structure: The mounting (Rectangular pipe /

square pipe / circular pipe) with requisite cross bars, nuts

and bolts, etc. shall be Hot deep galvanized with

minimum 80micron coating. The Rectangular / square

/circular hollow pipe section used for the structure should

have a minimum thickness of 2.0 mm. other than above,

the material thickness should be minimum 2.5 mm. A

certificate of a structural engineer certifying the strength

and stability of the mounting structure to withstand the

weight and wind speed of 150 km/hour throughout the life

span of 25 years of the system, shall be submitted by the

32 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

Hot Dipped Galvanized steel coils. suitable arrangement

for base plate for foundation , solar panel mounting, the

structure should be suitable for carry the load of solar

panel,wiring, sprinkler system etc. with necessary

foundation work/wall mount, j bolt, anchor fastner etc. the

nut bolt used for installtion of stucture should be (SS 304)

quality.The ground clearance of the bottom most edge of

solar panel shall not be less than 300 mm to 1200 mm or

as per site’s technical/feasibility requirement.

a. Column –The minimum section (thickness) should be

b. Rafter - The minimum section (thickness) should be

c. Purlin - The minimum section (thickness) should be

40MM * 40MM Balane of System with necessary

Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as per

the CEIG drawing approval, lightining arrester system as

per the CEIG drawing approval, all liasoning work with

various gov. dipartment like state nodal agency,DISCOM

& CEIG is included in agency scope

(Excluding All charges namely GEDA Application fees,

Solar connectivity Charges, Meter connectivity Charges,

Meter testing Charges and system stability/strenthning

charges.) (D) Grid Tied Solar Power System: 26 - 50 kW (3 -

Total of Ele Items (B) Rs.

Total of (A)+ (B) Rs.

Note: Fix Deduction of Credit of Dismental Materials Rs.2,28,833.76 will be deduct from 1st RA bill.

Amount of my tender work out as under

I / We am/are willing to carry out the work at ………………………………………….. % above / below

Percent [should be written in figures and words] of the estimated rates mantioned above. Amount of

my/our tender works out as under

Estimated Amount Put to tender: Estimated Amount Put to tender:

Deduct % below Add % above

Net Rs. Net Rs.

In words : In words :

Signature of Contractor

Deputy Executive Engineer Executive Engineer

City (R&B) Sub Division Jamnagar (R & B) Division,

Jamnagar Jamnagar.

33 of 34 2DTP of Revenue colony 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

1) The work shall be carried out as per Public Works Department Hand Book, I.S. Specification and

other specification of the Division or as Directed.

2) All the columns in Schedule should be filled in INK and the total of the entries in the last column

should be strike out by the Contractor under his Signature.

3) Rates should include clearance of site (Prior to commencement of work and its close) in all

respect and good for work under all conditions of site moisture weather etc.

4) The Contractor shall exhibit the details of works, Tenders amount and specification as per Govt.

Circular No. TD 32772 N. Dt. 26-4-78 and as per G.R. No. TNC-9-24-C, Dt. 18-11-91, as directed by

Engineer-in-Charge of the works, on board at site of the work.

5) Contractor shall even "NIL" percentage, if no deduction is offered.

6) Testing of materials shall be as per statement attached with the specification. The material shall

be tested in GERI Bill for the testing shall be paid by the Executive Engineer and 1% of amount put

to tender after deducting the cost of materials to be supplied by Department as per SCHEDULE

'A' at the sanctioned estimate rates from the Contractor in Running Bills. (As per G.R.No. (R&B)

TNC-1085/4/C Dt. 20-12-91 and modified ide (R&B) Deptt. Circular No. SSR/10000092-IB-12910-C

7) For R.C.C. Item where there is change of grade mix or charge as per actual mix design the

difference of cement consumption shall be deducted from rate of original item at the rate of star

rate mentioned in the tender.

8) 1% L.C. shall be deducted from the bill as per agreement.

9) GST will be paid extra as per Govt. Emendment.

10) GST and Income tax will be deducted at source while making payment of bills

Signature of Contractor

Deputy Executive Engineer Executive Engineer

City (R&B) Sub Division Jamnagar (R & B) Division,

Jamnagar Jamnagar.

34 of 34 2DTP of Revenue colony 06-26