Erection of poles, drawing of conductor and earth wire of 3.3KV Overhead line for quarry feeder for day to day works as and when required in Gidi-C Colliery under Argada Area .

Amount

Erection of steel tubular pole strut in cement concrete 1:3:6(1 cement 3 coarses sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and Secured with holding clamps,bolts nuts Etc. As required

Supply and erection of stay set complete (galvanished) with 19/20mm dia. X 1.9 mtr. Long stay rod anchore plate of size 45cm X 45cm X7.5 mm ,thimble stay clamps,bow tightner, 7/4.00 mmdia GI stay wire and insulator etc. in cement concrete 1:3:6 (1 cement : 3 corses sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required. (1.725 km X 394 kg/km)

Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanished insulator fittings,ball and socket type and complete with galvanised strain clamps,bolts,nuts,washer etc. as required

Supply and erection of 11 KV pin insulator complete with large steel head GI pin, nut, washer etc. as required

Supply of 8 SWG G.I wire

Erection of G.I wires No-8 SWG including binding etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre ) pole top bracket/ cross arm for single 11KV overhead line conductor complete with 50mm X 6mm flat iron clamps , bolts, nuts and washer etc including drilling of holes for insulator pins (as per drawing) and painting with primer and finished paint as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre ) cross arm for 2 wire over head line complete with clamps , bolts, nuts and washer etc including drilling of holes for insulator pins (as per drawing) and painting with primer and finished paint as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre ) cross arm for 4 wire over head line complete with clamps , bolts, nuts and washer etc including drilling of holes for insulator pins (as per drawing) and painting with primer and finished paint as required.

Total impact of GST for the purpose of CTC

R.S Construction

DATA RAM MAHTO