Target 2026-27- Fabrication of 11 kV V Cross Arm 7000 Nos,1.8m C X Arms 1400 Nos,2.4m C X Arms 1400 Nos,3m C X Arms 850 Nos,4 Line C X Arms 13000 Nos,2 Line C X Arms 10000 Nos,16mm dia LT Stay Rod 8000 Nos. at MF1 Angamaly.

Fabricating 11kV 'V' cross arms using MS Channel 75x40mm (departmental free issue) cutting by gas, drilling 4Nos. of 23mm dia holes and 2 Nos 20mm dia holes, bending into required shape and jointed by arc welding in both sides of each gas cutting portion including cutting of 4 Nos 50mm long using MSF 50x6mm/50x8mm pieces punched with 23mm dia holes which is placed on the top of 4 Nos drilled holes and welded as per drawing including flux removal, counting and stacking the finished goods, conveying and stacking cut bits & scrap etc. to the place pointed out by the departmental officers etc. complete. (Charges inclusive of labour, welding electrodes, cutting gas, punch & die, drill bits etc.)

Fabricating 1.8m channel cross arm using MS channel 75x40 mm (departmental free issue) with 22mm dia drilled/punched holes 4 Nos as per Boards specification and drawing including gas cutting, levelling stacking fabricated items & conveying the scrap at suitable place as per the direction of the departmental officers etc. complete (Charges inclusive of labour & consumables such as cutting gas, LPG, punch, die etc.)

Fabricating 2.4m channel cross arm using MS channel 75x40 mm (departmental free issue) with 22mm dia drilled/ punched holes 5 Nos as per Boards specification and drawing including gas cutting, levelling and stacking fabricated items and conveying scrap at suitable place as per the direction of the departmental officers etc. complete (Charges inclusive of labour & consumables such as cutting gas, LPG, punch & die etc.)

Fabricating 3.0m channel cross arm using MS channel 100X50mm (departmental free issue), cutting to 3m length and 22mm dia.drillied/punched holes 7 Nos. as per Board's specification and drawing including gas cutting, levelling and stacking the finished products & scrap at suitable place as per the direction of the departmental officers etc. complete. (Charges inclusive of cost of labour & consumables, such as cutting gas, LPG,drill bit, punch & die etc.)

Fabricating 4 line cross arms using MS Channel 75x40mm, 1.065 m long with 4 Nos. 18 mm dia holes on both sides of flange by using drilling machine to hold the pin insulator verically and 2 Nos 16mm dia holes in web side as per drawing including cutting, leveling, punching and stacking the finished products at suitable places including scrap in such a manner that the items can be easily counted in numbers etc. complete as per direction of Departmental Officers. The rate will include the labour charges, shearing tools, die set, punch etc. (MS Channel 75X40 mm will be issued departmentaly free of cost at site)

Fabricating 2 line cross arms using MS Channel 75x40mm, 61cm long with 2 nos. 18 mm dia holes in each flange by using drilling machine to hold the pin insulator verically and 2 nos 16mm dia holes in web side as per drawing including cutting, leveling, punching and stacking the finished products at suitable places including scrap in such a manner that the items can be easily counted in numbers etc. complete as per the direction of Departmental Officers. The rate will include labour charges, shearing tools, die set, punch etc. (MS Channel 75X40 mm will be issued departmentaly free of cost at site)

Fabricating stay rod of length 1.70 m for LT lines using 16 mm dia M. S. rods as per design including marking, shearing, leveling, threading one end to a length of 5 cm suitable to nut available in the market, making a round hook in the other end and welding the joint and stacking the finished products at suitable places in such a manner that the items can be easily countable in numbers, as per the direction of Departmental officers etc. complete. (charges including of labour and cost of welding electrode & consumables)