REPAIR/RENEWAL OF CERTAIN FURNITURE AT AF STATION TEZPUR UNDER GE (AF) TEZPUR

Amount

Taking out existing unserviceable top from Executive Office Table with Drawer and Supply and Fix new top of size 1500 x 900 x 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with edge banding of 1.00 mm thick plastic laminated sheet with decorative choice lamination (width equal to width of particleboard), complete all as specified and as shown on drawing(s).

Taking out unserviceable drawer from Executive Office Table with Drawer and Supply and Fix of new drawer made of 12 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) , including brass chromium plated knob,complete all as specified and shown on drawing(s).

Material and labour for preparation of wood or wood based surfaces of Executive Office Table with Drawer and polishing with two or more coats of French polish upto glossy finish complete all as specified and directed. (Note:- Applicable for Serial Item No 1,2 & 3 :Executive Office Table with Drawer : Trade Pattern)

Taking out unservicable legs from Sofa Set [05 (Five Seater) : (One Three Seater and Two Single Seater)],front or rear legs and Supply and Fix new legs made out of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unservicable arms of Sofa Set [05 (Five Seater) : (One Three Seater and Two Single Seater)] and Supply and Fix new arms made out of 2nd class hard wood all as shown on drawing(s).

Taking out damaged upholstery from Sofa (Single Seater) and supply and fix new foam 25 mm thick,40 density,duly covered with Tapestry Cloth/ Leatherite Rexine both costing not less than Rs 450/- per meter as approved by GE perfectly fitting and stitching the foams with lining cloth and Tapestry Cloth/Leatherite Rexine as per existing design including restructuring internal wooden framework and replacement of the damaged members with 2nd class hard wood members as per existing size,complete all as specified and directed. [Make:- (Foam) Kurlon/Sleepwell/Dunlop]

Taking out damaged upholstery from Sofa (Three Seater) and supply and fix new foam 25 mm thick,40 density,duly covered with Tapestry Cloth/ Leatherite Rexine both costing not less than Rs 450/- per meter as approved by GE perfectly fitting and stitching the foams with inner lining cloth and Tapestry Cloth/Leatherite Rexine as per existing design including restructuring internal wooden framework and replacement of the damaged members with 2nd class hard wood members as per existing size,complete all as specified and directed. [Make:- (Foam) Kurlon/Sleepwell/Dunlop]

Material and labour for preparation of wooden surfaces and polishing new legs of Sofa Set [Five Seater (One Three Seater and Two Single Seater)] with two or more coats of French polish upto glossy finish after preparation of surface,complete all as specified and directed. (Note:- Applicable for Serial Item No 4 to 8 : Sofa Set [05 (Five Seater): (One Three Seater and Two Single Seater)] :Trade Pattern)

Taking out damaged upholstery from seat of Auditorium Chair and supply and fix new foam 75 mm thick,32 density, duly covered with Fabric Cloth/Tapestry Cloth both costing not less than Rs 450/- per meter as approved by GE perfectly fitting and stitching the foams with inner lining cloth and Fabric Cloth/Tapestry Cloth as per existing design,complete all as specified and directed. [Make:- (Foam) Kurlon/Sleepwell/Dunlop]

Taking out damaged upholstery from back of Auditorium Chair and supply and fix new foam 50 mm thick,32 density, duly covered with Fabric Cloth/ Tapestry Cloth both costing not less than Rs 450/- per meter as approved by GE perfectly fitting and stitching the foams with inner lining cloth and Fabric Cloth/Tapestry Cloth as per existing design,complete all as specified and directed. [Make:- (Foam) Kurlon/Sleepwell/Dunlop]

Taking out unserviceable arm rest from Auditorium Chair and Supply and Fix new PVC arm rest as per existing pattern,complete all as specified and as shown on drawing(s).

Supply and Fix in repair,mild steel screw bolts (machine made),with hexagonal or square heads at one end and screwed the other,or screwed both ends,diameter of shank 8 mm,length of bolt 2.5 cm long (Approx), suitable for the sockets in the frames of Auditorium Chair,complete all as directed.

Materials and Labour for,re-fixing/re-installation of Auditorium Chair in existing position including replacement of damaged fasteners, 8 mm dia.,50 mm long (Approx) suitable for the legs of Auditorium Chair and including providing necessary plain cement concrete PCC (1:2:4) Type B0 (using 12.5 mm graded aggregate) for grouting of the foundation bolts etc., complete all as specified and directed. (Note:- Applicable for Serial Item No 9 to 13 : Auditorium Chair :Trade Pattern)

Taking out damaged upholstery from seat of Executive Revolving Chair and supply and fix new foam 75 mm thick,32 density, duly covered with Fabric Cloth not less than Rs 450/- per meter as approved by GE perfectly fitting and stitching the foams with inner lining cloth and Fabric Cloth as per existing design,complete all as specified and directed. [Make:- (Foam) Kurlon/Sleepwell/Dunlop]

Taking out damaged upholstery with foam from back of Executive Revolving Chair and supply and fix new foam 50 mm thick,32 density, duly covered with Fabric Cloth/Leatherite Rexine not less than Rs 450/- per meter as approved by GE perfectly fitting and stitching the foam with inner lining cloth and Fabric Cloth as per existing design,complete all as specified and directed. [Make:- (Foam) Kurlon/Sleepwell/Dunlop]

Taking out unserviceable arm rest from Executive Revolving Chair and Supply and Fix new PVC Arm Rest as per existing pattern,complete all as specified and as shown on drawing(s). (Note:- Applicable for Serial Item No 14 to 16 : Executive Revolving Chair :Trade Pattern)

Taking out existing unserviceable plywood top from Charpoy Folding IP with Hard Top and supply and fix new 12 mm thick ,7 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303),complete all as specified and shown on drawing(s).

Supply and Fix in repair, hard rubber shoes suitable for legs of Charpoy Folding IP with Hard Top, complete all as specified and shown on drawing(s).

Materials and Labour for,preparation of old painted steel and iron surface in Charpoy Folding IP with Hard Top and applying one coat of synthetic enamel paint (ordinary tint),complete all as specified and directed. [Note:- Applicable for Serial Item No 17,18 & 19 : Charpoy Folding IP with Hard Top : Refer Drawing No FD-388(R)]

Materials and Labour for,running welding in repairs,exc 2.5 cm and not exc 5 cm in length and thickness of metal to be welded not exceeding 6mm thick,complete all as specified and directed.

Evergreen Firm