Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹63.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹57.0 L+₹3.6 L (6.69%)Rejected-Finance SRINGARI COMPLEX CANARY HILL HAZARIBAGH | HAZARIBAGH | HAZARIBAGH | JHARKHAND | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | CHANDRA BROTHERS L1 | SUMAN ENTERPRISES L2 |
|---|---|---|---|---|---|
| 1.00 | V.T. Pump set No.-2:-
Supplying, Installation, Testing and commissioning of 1 No. of Bowl assembly set suitable for existing 1400 KW Vertical Turbine Pump Set No.-2 [ Make: Jyoti ] capable of discharging 2000 m3/hr (33334 LPM) raw water against a total head of 166 meter as per IS: 1710/1989 with suitable for below the floor installation and existing delivery header coupled with existing 11KV, 3 phase, AC, 50Hz, 4 Pole,Speed- 1480 rpm, HT Squirrel Cage motors | 1 | Job | 45,12,000 ₹45,12,000 Lowest | 48,50,000 ₹48,50,000 |
| 1.01 | Cost towards disconnecting, dismantling and lifting of old 1400 KW motor with all accessories including all labour tools and tackles etc all complete. | 1 | Job | 97,500 ₹97,500 Lowest | 1,05,000 ₹1,05,000 |
| 1.02 | Cost towards lifting of old 1400 KW pump with all 450 mm dia column pipes, Tee , short pieces, shafts, muff couplings etc with all accessories including all labour tools and tackles etc all complete. | 1 | Job | 1,23,000 ₹1,23,000 Lowest | 1,25,000 ₹1,25,000 |
| 1.03 | Cost towards derusting and cleaning of column pipes (450 mm dia x 1.5 m- 11Nos.) with wire brush & other equipments including manual man power for making rust free and 2 coat painting inside and outside surface of all column pipe & other pump fittings such as Tee, short piece etc all complete. | 1 | Job | 98,000 ₹98,000 Lowest | 99,000 ₹99,000 |
| 1.04 | Cost towards lowering of 1400 KW pump set with all 450 mm dia column pipes, Tee , short pieces, shafts, muff couplings etc with all accessories including all labour tools and tackles etc all complete. | 1 | Job | 1,20,000 ₹1,20,000 | 1,18,000 ₹1,18,000 Lowest |
| 1.05 | Cost towards making ot thrust block support for VT Pump set with supplying and fitting of MS Rod, foundation bolts etc including welding works such as cutting and jointing etc as site requirement, with cement, sand , stone chips, as required and plastering and punnning over exposed surface etc all complete with materials, all labour tools and tackles etc all complete. | 1 | Job | 1,05,000 ₹1,05,000 Lowest | 1,08,000 ₹1,08,000 |
| 1.06 | Cost towards making and fitting of short piece of 450mm dia x 2ft long with 450mm dia flange at both end, nut bolt etc with all labour tools and tackles all complete. | 1 | Job | 52,000 ₹52,000 | 51,000 ₹51,000 Lowest |
| 1.07 | Cost for s/f of new bearing of motor
(Pump set no.-2)
(a) DE Bearing- 6228/C3 SKF Make | 1 | No | 33,800 ₹33,800 Lowest | 40,000 ₹40,000 |
| 1.08 | (b) NDE Bearing- 7319 B ECBM SKF Make | 1 | No | 52,500 ₹52,500 Lowest | 60,000 ₹60,000 |
| 1.09 | (c) Cost towards motor dismantling, motor coil washing through thinner, motor heating, motor varnishing with gun spray, again motor heating with testing, both side bearing dismantling & installation of new bearing, complete motor fitting testing with equipments. As motors are in running condition. Only bearing replacement, meggering, cleaning & varnishing etc all complete. | 1 | Job | 1,28,000 ₹1,28,000 | 1,23,000 ₹1,23,000 Lowest |
Tender Value
₹63.4 L
EMD Value
₹1.3 L
Closing Date
21 Aug 2026, 4:00 pmClosed
Executive Engineer
O/o E.E.D.W. and S Mech Division Dhanbad
Supplying Installation Testing and Commissioning of Bowl Assembly set for existing 1400KW VT Pump Set No-2 Discharge-2000 m3/hr Head-166m, Pump Make-Jyoti make and allied works at Raw water Pumping Plant on Gogna Intake well at Maithan of DUWSS
2026_DWSD_116886_1
DWSD Dhanbad 05-2026-27 (Group-B) 2nd Call
Open Tender
Machineries/ Mechanical Engg Items
Supply
120 days
Dhanbad
Please refer Tender documents.
3 documents required · 3 mandatory
₹10,000
₹1.3 L
6 Oct 2026
7 Aug 2026
22 Aug 2026
7 Aug 2026
21 Aug 2026
7 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1V.T. Pump set No.-2:- Supplying, Installation, Testing and commissioning of 1 No. of Bowl assembly set suitable for existing 1400 KW Vertical Turbine Pump Set No.-2 [ Make: Jyoti ] capable of discharging 2000 m3/hr (33334 LPM) raw water against a total head of 166 meter as per IS: 1710/1989 with suitable for below the floor installation and existing delivery header coupled with existing 11KV, 3 phase, AC, 50Hz, 4 Pole,Speed- 1480 rpm, HT Squirrel Cage motors | |||||
| 1.01 | Cost towards disconnecting, dismantling and lifting of old 1400 KW motor with all accessories including all labour tools and tackles etc all complete. | - | Job | - | - |
| 1.02 | Cost towards lifting of old 1400 KW pump with all 450 mm dia column pipes, Tee , short pieces, shafts, muff couplings etc with all accessories including all labour tools and tackles etc all complete. | - | Job | - | - |
| 1.03 | Cost towards derusting and cleaning of column pipes (450 mm dia x 1.5 m- 11Nos.) with wire brush & other equipments including manual man power for making rust free and 2 coat painting inside and outside surface of all column pipe & other pump fittings such as Tee, short piece etc all complete. | - | Job | - | - |
| 1.04 | Cost towards lowering of 1400 KW pump set with all 450 mm dia column pipes, Tee , short pieces, shafts, muff couplings etc with all accessories including all labour tools and tackles etc all complete. | - | Job | - | - |
| 1.05 | Cost towards making ot thrust block support for VT Pump set with supplying and fitting of MS Rod, foundation bolts etc including welding works such as cutting and jointing etc as site requirement, with cement, sand , stone chips, as required and plastering and punnning over exposed surface etc all complete with materials, all labour tools and tackles etc all complete. | - | Job | - | - |
| 1.06 | Cost towards making and fitting of short piece of 450mm dia x 2ft long with 450mm dia flange at both end, nut bolt etc with all labour tools and tackles all complete. | - | Job | - | - |
| 1.07 | Cost for s/f of new bearing of motor
(Pump set no.-2)
(a) DE Bearing- 6228/C3 SKF Make | - | No | - | - |
| 1.08 | (b) NDE Bearing- 7319 B ECBM SKF Make | - | No | - | - |
| 1.09 | (c) Cost towards motor dismantling, motor coil washing through thinner, motor heating, motor varnishing with gun spray, again motor heating with testing, both side bearing dismantling & installation of new bearing, complete motor fitting testing with equipments. As motors are in running condition. Only bearing replacement, meggering, cleaning & varnishing etc all complete. | - | Job | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
tenderdocument.pdf
Tender Documents • 0.35 MB
BOQ_158011.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .