Rejuvenation of Khuwan Sar and Sheikh Sar Sumbal

Dredging by means of Hydraulic Excavator/Pontoon based excavator in all classifications of soil or in foul conditions such as loose,soft soil,mud,rubbish,decomposed soil,of all sorts in any type of strata including all lifts and initial lead of 50 meters.

Dredging by means of Hydraulic Pontoon based excavator in all classifications of soil such as loose,soft soil,mud,rubbish,decomposed soil,of all sorts in any type of strata including all lifts and initial lead of 50 meters.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Extra rate for Quantities of work executed in or under water and or liquid mud,incl. pumping out water as required.

Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge

Extra Carriage of excavated material by boats/khacooz/barges/tug boats upto temporarily designated dumping site including unloading of excavated dredged material upto edge of lake a) Avg. lead 50 Mtrs

b) Avg. lead 250 Mtrs

Carriage of excavated material by mechanical means including loading,unloading and stacking upto designated dumping site at Shalkhud. a) Avg. lead 02 KM

b) Avg. lead 01 KM

Providing and laying of dry stone solling incl cost of solling stones

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering incl. struttring, propping etc. and removal of form work.

b) Suspended floors, roofs, landings, balconies and access platforms.

Structural steel work welded in builtup sections, trusses and framed work, incl. cutting, hoisting, fixing in position and applying a primming coat of approved steel primer all complete (Welded)

Providing , Installation , commissioning of Single Winch machine complete set of standard quality of 3 tonne capacity with double threaded 50mm dia Winch rod, Gears , Pedestal Rain Cover ,Grease Lids, MS Sleeves, operating Handle with locking arrangement including greasing & oiling complete Job including all sorts of carriages (Mechanical and Manual) upto site of work.

Providing and Fixing of Rubber Seal to Gate/sluice for checking of leakages PVC Quality with 25 x 0.5 mm with plate iron steps including nuts and bolts, complete as per directions of Engineer-in-Charge.

Carriage of materials from source to site by mechanical transport including loading, unloading and stacking etc a) 40 mm stone Avg 15 KM

b) 20 mm Stone Avg 15 KM

c) Sand Avg 02 KM

d) Stone Avg 15 KM

Please Enable Macros to View BoQ information