Spl repair/replacement to internal wiring, Electrical fittings and connected items at varios area at site 1A and 1B at 33 SU and Provn of Bore Earth pits with allied works at various communication Equipment rooms at site 1A and Site 1B at 33 SU

Amount

Taking down carefully copper/aluminium point wiring light ,fan, socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors etc. Complete all as specified and directed by Engineer-in-Charge.

M&L for Cutting chases, pinning in Brick Wall, making good to facings where required and pointing in cement mortar 1:3 to nds or edges of landings, steps, ecills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as speicified.

M&L for Cutting chases, pinning in Concreate/Stone Wall, making good to facings where required and pointing in cement mortar 1:3 to nds or edges of landings, steps, ecills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified.

Point wiring with 1.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, drawing in and including PVC casing capping 20/25 mm dia medium grade ISI marked with all accessories such as bends, elbows reducers, pressed steel/ MS terminal boxes factory made 1.6 mm thick dully painted in rectangular shape appropriate size for one light/ fan point controlled by one 5 Amps switch one way, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, sockets requlators etc and continous PVC insulated and unsheathed 1.5 Sqmm copper conductor cable multistrand as earth wire, complete all as specified.

All as per sel item No. 04 above but 3 pin socket outlet, 5/6 Amp on Independent board.

All as per sel item No. 04 above but 3 pin socket outlet, 5/6 Amp on same board.

All as per item No.04 above but with 2.5 Sq mm cable for Independent one 6 pin 6/16 Amps socket outlet In and including 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire.

Point wiring with 1.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, drawing in and including PVC conduit 20 mm dia medium grade ISI marked with all accessories such as bends, elbows reducers, pressed steel/ MS terminal boxes factory made 1.6 mm thick dully painted in rectangular shape appropriate size (having wall thickness of conduit not less than 2.00 mm) for one light/ fan point controlled by one 5 Amps switch one way, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, sockets requlators etc and continous PVC insulated and unsheathed 1.5 Sqmm copper conductor cable multistrand as earth wire, complete all as specified. (Note:- Necessary chases cuttings for concealed wiring and making a good of distrubed surfaces are measured and paid under relevant items)

All as per sel item No. 08 above but 3 pin socket outlet, 5 Amp on Independent board

All as per sel item No. 08 above but 3 pin socket outlet, 5/6 Amp on same board.

All as per item No.26 above but with 2.5 Sq mm cable for Independent one 6 pin 6/16 Amps socket outlet In and including 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 Voltsgrade IS -694 FRLS cable for continuous earth wire.

S&F in repair switch piano 6 amps flush type single pole one way

S&F in repair switch piano 16 amps flush type single pole one way

S&F in repair socket outlet flush type 5 pin 6 amps

S&F in repair socket outlet 2 in 1, 5 pin 16 amps flush type

S&F in repair modular switches 6 amps single pole one way

S&F in repair modular switches 16 A single pole one way

S&F in repair modular socketes outlet 6 amps 5 pin

S&F in repair modular socket 6-16 A 3 pin combined ced shuttered

Supply and fix Switch Bell push flush type, 5 Amps 240 volts.

Supply and fix Call bell ding dong muscial type , AC, 230 Volts, Single pole.

S&F in repair modular Step fan Speed regulator 5 steps

Supply and fixing in repair Steped type elecrtonic fan regulator flush type

Supply and draw in repair submain wiring with two single core 6 sqmm FRLS PVC insulated copper cable 1100 vots grade multistrand, unseathed conductor drawn into PVC conduit and all necessary fittings including 6 sqmm multi strand FRLS PVC insulated copper wire for earth continuty conductor connected to common earth dully complete including taking down old unserviceable sub main wiring of any size and making good disturbed surface complete all as specified and directed.

All as per Item No-24 above but two single core 4 Sqmm for phase & neutral and 01 single core 4 Sqmm for earth wire.

All as per Item No-24 above but two single core 2.5 Sqmm for phase & neutral and 01 single core 2.5 Sqmm for earth wire.

S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp.

S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of SPN 40 to 63 amp.

S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of TPN 40 to 100 amp.

S&F in repair MCCB of capacity 125 Amps, 415 Volt, fixed type with breaking capacity 16 KA complete all as specified

Supply and fixing in repiar 6500K cool white LED 4 feet tube light fitting 1x 36W lumen up to 4000, 220V,AC batten type connecting up with flexible copper conductor cable of suitable size from ceiling rose complete Make:- Orient or equivalent approved in Havells/ Philips/ Bajaj/ Wipro

Supply and fixing in repiar 6500K cool white LED 4 feet tube light fitting 1x 22W square, lumen up to 2200, 220V,AC batten type connecting up with flexible copper conductor cable of suitable size from ceiling rose complete Make:- Orient or equivalent approved in Havells/ Philips/ Bajaj/ Wipro

Supply and fixing Pixel white colour BLDC ceiling fan of size 1200 mm sweep, 3 blades, five speed, noise level up to 65 dB, single phase 220-240 V, 50 HZ, motor speed 350 RPM with air delivery 225 CMM complete all as specified and directed. Make:- Orient electric or equivalent approved in Philips/ Havells

Supply and fixed in repair Round/ Square LED surface panel full screen lights of 1 X 18 W, cool white 6000K/ Warm white 3000K with high grade polycarbonate housing for better aesthetic appeal with edgeless diffuser duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified. Make:- Orient or equivalent approved in Havells/ Philips/ Bajaj/ Wipro

S&F in repair precisely designed decorative PMMA diffuser 2'X2' panel light that unites a creative design with state-of-LED technology energy efficient recessed mounted LED 36W luminaire suitable for 2'x2' grid ceiling with flat duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable Make:- Orient or equivalent approved in Havells/ Philips/ Bajaj

S & F sheet metal enclosures with socket plug top and MCBs having single pole and nutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20Amp 240V complete all as specified and as directed.

Supply and fixing in repair metalic body round/ square type shutters suitable for up to 450 mm sweep exhaust fans ), colour- Grey, complete all as specified and directed.

Supply and fixing in repair steel wire mesh net mosquito along with aluminum frame, shape in round/ square type suitable for up to 450 mm sweep exhaust fans ), necessary fixing materials complete all as specified and directed.

M & L for cutting holes 300mm/450mm diameter for preaparing opening through brick/stone masonary wall for fixing exhaust fan 300mm/450mm sweep, making good to damaged surface of wall, make a smooth circular/ square surface and match with specification of existing wall all as directed by Engr-in-charge at site

Supply and fixing metalic type Ventil Air DS single phase exhaust fan of sweep size 300 mm (12 inch), 1400 RPM, colour- Grey, Four arm fan blades, steel shutters on exhaust sidesingle phase 230 Volts, 50 HZ complete all as specified and directed. Make:- Havells or equivalent approved in Philips/ Bajaj/ Usha

Supply and fixed in single phase non-metalic PVC exhaust fan of 10" Sweep along with PVC shutters complete all as specified and directed. Make:- Havells or equivalent in Philips/ Bajaj/ Indo-Asian

Supply and fixed in Eternal Bulkhead fittings along with 10 W LED lamp, lumen up to 1000, single phase complete all as specified. Make:- Orient or equivalent approved in Havells/ Philips/ Bajaj/ Wipro

Taking down fan, sealing cable end, dismantling blades and removing fan and blades for painting & serveicing of cealing fans etc complete all as specified.

Material and Labour for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified.

Supply and install BEE 5 Star rated water storage heater type of capacity 25Litrs, 2KW, 230 volts, AC, 50 Hz including PVC connection of size 15 mm dia & 900 mm long for hot water complete with both end Make:- Havells Fabia model no. GHWAFATIB025 colour Ivory Brown or other equivalent approved in Philips/ Bajaj/ Orient

Taking down old LT feeder pillar box, VTPN DB's, TPN DB's & SPN DB's from existing place and removing carefully old service power cables of any size from all type of electrical panels & DB's etc. and after installing of new feeder pillar box, Distribution boards, reconnecting same power cables with suitable thimbles, cable glands & other necessary items which are to be required for fixing of cable complete all as specified and directed by Engineer-in-Charge.

Supply, installation,testing and commissioning LT Feeder Pillar Box suitable for working on 3 phase, 4 wire, 415 volts, AC,50 HZ, indoor/Outdoor type,cubicle, floor mounted, free standing, dust and vermin proof, air ventilation with IP-43 protection fabricated out of 3.15 mm thick CRCA sheet powder coated painting , CPRI approved,separate compartment for MCCB/metering eqpts/cable gallay etc,Front and rear hinged door with locking arrangement, copper bus bar duly covered with heat shrinkable sleeves colour coaded fixed on DMC/SMC insulators bottom cable entry holes for incoming and outgoing cables and connecting the outgoing MCCBs/switch gears with main bus bar by using aluminium bus links or copper conductor cable of suitable rating and connecting with terminal blocks of appropriate rating terminated by cable lugs, thimbles etc, earthing terminals, affixing danger notice plate, control wiring with flexible copper conductor cables of suitable size and adequate length, control fuses/MCBs and PCC foundation as per site requirement. Angle iron of size 50mmx50mmx6mm for mounting of LT Feeder Pillar Box 40cm above floor level complete including necessary PCC foundation all as specified and directed by Eng-in-Charge comprising of following:- (a) MCCB 4 Pole, 160 A, 415V, 36 KA Adjustable type - 01 No. (Incoming) (b) MCCB 4 Pole, 100 A, 415V, 16 KA With Fixed type - 03 No. (Out Going) (c) MCCB 3 Pole, 63 A, 415V, 16 KA With fixed type - 01 No. (Out Going) (d) TPN MCB, 40 A, 415V - 01 No. (Out Going) (e) Voltmeter, Digital type - 01 set (f) R-Y-B phase indicating lamp- 01 set (g) Internal wiring with suitable size of PVC insulated stranded copper conductor duly crimped with copper lugs ferruled.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, laying of cables, etc. and getting out in Soft/loose soil complete all as specified

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm depth in soil.

Removing excavated material (soil ) n.exc 50m and depositing where directed at a level n.exc. where directed at a level n.exc. complete all as specified.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as directed. (Note: The punned down thickness shall only be measured)

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm

Supply and laying XLPE insulated PVC FRLS, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area, galvanized steel strip or wire armoured, of size 3.5 core 120 Sq mm

All as per item no.59 here-in-before but of size 4 core 25 Sq mm

All as per item no.59 here-in-before but of size 4 core 16 Sq mm

All as per item no.59 here-in-before but of size 3.5 core 50 Sq mm

Dismantling concrete poles/struts, any size

Dismantling/Taking out insulators any type, any size from LT/HT over head line complete all as specified and as directed.

Supply and fixing 40 mm 'light grade' galvanised,with all fitting and fixed complete for fixing of cables along with wall up to VTPN DB's (Note:- Quoted inclusive of requiement nut & bolts, clamps for fixing light grade GI pipe alongwith wall)

Dismantling of ACSR or AAC conductors

Material & Labour for bore earthing 150mm dia burred by vertical boring machine, depth 75 mtr below ground level using earth electrode 50mm dia Gl pipe medium grade duly drilled with holes of 12mm dia, 15 cm C/C on both side of the pipe including lowering of Gl pipe 50mm dia medium grade in bore well upto the depth of 70 mtr and one metre above the ground level.The pipe electrode should be filled around commecial salt, charcoal dust, copper sulphate and magnesium phosphate of 30 cm layer each upto the full length of pipe. The bore well should have 12 metre of length 150mm dia MS pipe 4.8mm wall thickness for protection of bore well, welding of Gl strip 50x6m on earth electrode, Gl pipe 50mm dia upto 10 metre below ground level and 15 meter from the bore well to test point gun metal and PCC foundation sorrounding the bore well 60x60x30 cm, complete all asspecified and directecd.Note:- If GI strip required more than 20 metres, than length exceeding 35 metes shall be measured and paid separately.

M8L for 70 sqmm multistranded flexible copper conductor with suitable mounting accessoreis The mounting clamp should be Non conductive metarial used in earthing directed as per engineer in charge.

Supply & Fix test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex . Head screw As required all accessories.

S&F Copper strip 25x3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed.

M&L for PCC earthing chamber of size 150x150x300mm made up of PCC 1:2:4 type B-2 Block for earthing along with red paint all as specified and directed.

M&L Kota stone earth pit cover (2*2 feet) directed as per engineer in charge.

S&F seprator U type made of porcelene uses for Earth strip mounting with all nut bolts and connecting accessories directed as per Engineer-in-Charge.

M&L PVC/rubber pipe/Sleeve for protaction of Earth strip and insulation purpose directed as per engineer-in-Charge.

M&L for copper plate 05mm thickness, 01ft x 01ft wall mounting with 04 holes for termination of cable eyelets, Copper plate should be fix on wall with insulation material all as directed.

S&F for insulation of earth notice plate of size 1.6mm thick mild steel sheet, Vitreous enamelled white, with latters, figures i.e pit number, connected to tested date ohmic value as per directed by EIC fixed beside earthing pit with GI stand of approved size all as directed by EIC.

M/S KAUTILYA GARG (BID ID -3482060)