RENOVATION OF OCCUPATIONAL HEALTH CENTRE AT FACT UC.

Demolishing and removing carefully existing brick/rubble/laterite masonry in cement mortar at all levels manually/ by mechanical means, including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 150 metres lead : Of area 3 sq. metres and below

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120 cm girth upto and including 240 cm girth

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in all classes of soil except hard rock requiring blasting for foundation trenches,drains, column footings, equipment foundations etc.(not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand).

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand).(Rubble, Cement will be issued free of cost by the company)

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. up to 5Km distance.

Solid concrete block masonry in cement mortar 1:5 using good quality cement concrete blocks approved by the Engineer in charge for superstructure in ground floor/upto 5m height from plinth level/floor level.

Steel reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete: Mild steel/Hot rolled deformed bars (Reinforcement rods will be issued free of cost by company)

Centering and shuttering including strutting, propping etc. and removal of form for all heights for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for all heights for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for all heights for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)for height upto 10m from ground level.

Dismantling carefully the tile work & plastering in wall including stacking material within 50 metres lead.

Demolishing & removing 20 mm thk cement floor topping manually/mechanical means, including disposal of debris within 50m lead as per the directions of Engineer-in-charge.

Providing and laying vitrified floor tiles in Size of Tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in Size of Tile 600x600 mm(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigmentsetc. complete.

Providing and laying anti skid ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge for fixed portion (Glazing, panelling and dash fasteners to be paid for separately).

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With toughned glass panes of 4.0 mm thickness

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With toughned glass panes of 5.5 mm thickness

Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS :3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing 150x10 mm aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Powder coated minimum thickness 50 micron

Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Supplying, laying, jointing & hydrostatically testing ISI marked PVC pipes conforming to IS 4985 and all required PVC specials such as tees, bends, elbows, unions, reducers, adapters, coupling etc., as per IS 7834 or IS 10124 as the case may be, including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferrule, pipe supports, etc., hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 -For external lines-25 mm or nearest OD

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. with 25 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 - 15mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia

Supplying and fixing P.V.C. pipes conforming to IS 4985 class II-4kg/sq.cm pressure for waste water lines with all required specials such as plain bends, single junctions, elbows, unions, etc. including cutting masonry or concrete floors, etc. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with clamps screwed in to masonry wherever required etc. complete-63mm or nearest outer dia.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing at all levels Health faucet with wall hook and 1.5m SS braided rubber hose pipe of product code of Hindware (product: F160023) or equivalent model from Cera, Parryware and angle stop cock of grohe (code : 2201600M flow rate≤ 5 litres per minute) including fitting, cutting and making good the walls etc. complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Suppling and fixing 600 x20 mm or nearest Stainless steel heavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete

Supply and fixing stain less steel hanger unit having min 3 hooks

Supply fabrication and fixing of steel structures made with M.S.Hollow square / Rectangular sections of TATA/JINDAL of different sections with insert plates ,legs etc .and blinding the section ends with M S plates etc. at all heights with necessary welding, scaffolding and painting with two coats of zinc cromate yellow mettal primer and two coats of synthetic enamel paint with all labour and material charge etc. complete

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with SS 304 bolts & nuts 8mm dia. SS 304 plain/bitumen washers complete . The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth, 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified.

Supplying and fixing at all levels FRP doors with frames & 4mm etching glass made of glass fibre conforming to IS: 11551 (As per attached technical specifications).

Providing and fixing false ceiling with PVC lamination sheet 9 mm thick (3050 x300 x 9mm) of approved quality and shade on the existing / new wooden frame work including fixing to the frame work with C.P brass screws etc. complete as directed by the Engineer-in-Charge including cost of PVC sheets, beeding, screws etc. and labour charges but excluding cost of frame work.

Applying priming coat with water thinnable cement primer of approved brand and manufacture, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre on all surface.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour,One coat - of exterior grade.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.One coat.

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:-One coat

Supplying Ferro cement septic tank of 30 users capacity having wall thickness 60mm or nearest including installing in position with all necessary pipes and fittings and making connection with the waste line inclusive of cost of all material and labour complete.

Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete - 110mm or nearest OD .

T HARIDASAN