RATE CONTRACT BIO MEDICAL WASTE MANAGEMENT ITEMS on composite basis

Bidder's Firm Name : The Rate column shall be mandatorily filled. Blank, empty, or zero (0) values are not permitted.

CODE Item Name Size & Color Specification Original Manufacture Firm's name Make-Model Rate (Exluding GST)

1 Medical Waste Disposable Containers 34 Litres (Blue Colour) 1. The container shall be made of high-impact virgin polypropylene, blue in colour, and may be round or rectangular to ensure stability at higher volumes. 2. The nominal capacity of the container shall be 34 Litres. 3. The container shall be puncture-proof, tamper-proof, and leak-proof, specifically designed for metallic implants (given Biopsy needle, lumber puncture needle Ortho implants etc). It shall bear the Biohazard symbol and comply strictly with the Bio-Medical Waste Management Rules. 4. The container shall feature a wide-mouth opening (minimum 200 mm diameter/width) with a reinforced snap-lock lid for large bottles. It must include a dedicated needle/scalpel removal port integrated into the lid. 5. The lid must feature a dual-locking system: a temporary closure for daily use and a hermetic permanent seal that prevents reopening once the container reaches the maximum fill level. 6. Dimensions: Height: 450–500 mm; Upper Diameter/Width: 350–380 mm; Lower Diameter/Width: 280–320 mm. (Wall thickness must be minimum 2.8 mm to prevent bulging underweight). 7. The unit must be equipped with heavy-duty ergonomic handles (molded into the body) to allow safe two-handed lifting and transport. 8. The container shall be autoclavable (up to 121°C or 134°C) and made of environment-friendly, recyclable material. 9. The product must be CE (European) certified, ISO 13485 certified, and UN 3291 approved (for transport of dangerous goods). The manufacturer must hold ISO 9001:2015 and WHO-GMP certification. 10. A highly visible "Maximum Fill Level" line must be embossed or permanently printed at approximately 75–80% of the total height. 11. Labelling & Documentation Template: Each container must have a permanent label area (or a high-adhesion sticker) with the following fields: a. WASTE TYPE: [Infectious / Cytotoxic / General] b. WEIGHT: ________ kg c. DATE OF SEALING: //20__ d. WARD/DEPT: ____________ e. SIGNATURE: ____________ 12. Note:- The supplier may be asked to arrange a demonstration of their items for which rates have been quoted, to the AIIMS Jodhpur, if required. The expenditures incurred for demonstration of the items will be borne by the supplier.

2 BMW Bins 60 Liter (Red, Yellow, Green & Blue Bins with Trolley 1. Stainless steel frame with S.S foot operating system. Strong SS front support with proper rubber finished. 2. Available in one bin. 3. Dustbin body internally positioned. 4. One piece heavy duty Rotomoulding. Material 1. Made of good quality virgin, UV Resistant, Special grade LLDPE grade of polyethylene dustbin made up of plastic as per EN standard in all full body. 2. Made of anti-rust material, must be anti-microbial treated to avoid colonization of microbes 3.Must have a built-in handle and two smooth casters for easy movement 4. The bin must have molded top shoulder & pillar type rib design for extra strength. Dimensions 1. Front round double SS of rectangular top with holding lid support stopper of about 290mm*330(+/-10mm) with collar & rectangular bottom about 310mm*310 (+/-10 mm), Height 750 mm (+/-10mm) for 60 Liter with suitably designed with strong SS side plate lid support . 2. SS Pipe/Rod used for cage, handle and for operation of lid shall not be less than 7 mm diameter ass rod & steel grade 202. 3. Double angle rail for greater safety when emptying & slant down side large thick rod 3 cm (+/-.2 cm) handle for excellent control with user comfort. Workmanship & Finish 1. The bins must comply CE /EN / ISO 14001:2015 / CDSCO Certified company for quality & safety assurance.

3 BMW roller bins 120 liter (Red, Yellow, Green and Blue Bins with Trolley 1. Stainless steel frame with SS foot operating system. Strong SS front support with proper rubber finished. 2. Available in one bin. 3. Dustbin body internally positioned. 4.One piece heavy duty Rotomoulding, Bins with wheels Should be available in full body colour coding as per BMW rules 2016, 2018, 2019 Dimensions Front round double SS of rectangular top with holding lid support stopper of about 440mm*450(+/-10mm) with collar & rectangular bottom about 420mm*420 (+/-10 mm), Height 1025 mm (+/-10mm) for 120 Liter with suitably designed with strong SS side plate lid support. Workmanship & Finish 1. The bins must comply CE European / ISO 14001:2015 / CDSCO Certified company for quality & safety assurance.

4 Bio Medical Bins 20 liters (Red, Yellow, Green and Blue) Material 1. Made of good quality LLDPE virgin, UV Resistant polymer material. 2.Thickness of bins shall be minimum 5 mm (+/- 0.2mm) 3.Made of anti-rust food paddle connector for long life Durable Hinge Design Self-explanatory stickers of waste to segregate in it. Dimensions 1. LLDPE Bucket of Circular top with holding lid support stopper of about 335 mm (+/-10mm) with Built-in RFID chips nests collar & circular bottom about 278mm (+/-10 mm), Height 320 mm (+/-10mm) with suitably designed with strong SS rifted lid. 2. SS Pipe/Rod used for cage, handle and for operation of lid shall not be less than 7 mm di ass rod. 3. SS Pipe/Wire rod shall be not less than 7 mm diameter & steel grade 202. 4. SS Square (hollow pipe) 10 Nos. steel grade 202 of 20*20 mm shale be provided at the bottom for steady placement of the bin. 20 liter - Bin Capacity of 20 Liters & Dimensions not less than L393 mm x W 396 mm x H 412 mm. Workmanship & Finish 1. Lid of the bin shall be foot operated & SS bottom rod of foot operated mechanism shall be minimum 10 mm. 2. All Screw should be fridge by liquid rubber gasket & all in full body colors-Yellow, Red, Green, Black, Blue & White. 3. Bin Shall be printed as per requirement of Bio Medical Waste Management Committee. 4. Dimensional accuracy Ready to Use. 5. Produced by an ISO 45001:2018 (ISO for Manufacturing of Dustbin) & 14001:2015 Certified Unit. 6. The bins must comply UN /NFX / CE European / ISO 14001:2015 / CDSCO Certified company for quality & safety assurance

5.1 Bio Medical Bins for Trolley 5 Liter (Red, Yellow, Green & Blue) Material 1. Plastic bins LLDPE made from virgin polymer material. Thickness of bins shall be minimum 3 mm (+/- 0.2mm) LLDPE Bucket of circular top of about 180 MM (+/- 10 MM) with Built-in-RFID chips nests for identification & weighing system, circular bottom of about 160 MM (+/- 10MM) Height 325 MM (+/- 10MM) can be hang in trolley side properly in all. Workmanship & Finish 1. The bins must CE European / ISO 14001:2015 / CDSCO Certified company for quality & safety assurance.

5.2 Bio Medical Bins for Trolley 8 Liter (Red, Yellow, Green & Blue) Material 1. Plastic bins LLDPE made from virgin polymer material. Thickness of bins shall be minimum 3.5 mm (+/- 0.2mm) LLDPE Bucket of circular top of about 220 MM (+/- 10 MM) with Built-in-RFID chips nests for identification & weighing system, circular bottom of about 190 MM (+/- 10MM) Height 360 MM (+/- 10MM) can be hang in trolley side properly in all. Workmanship & Finish 1. The bins must CE European / ISO 14001:2015 / CDSCO Certified company for quality & safety assurance.

6 Mobile Multipurpose Bin 650 -750 Liter (Yellow/ Red) Material Made by high performance Green color plastic material container with strong single MS rod Lid & amp; Supporting MS Structure having four rubberized wheel and Side handle Workmanship & Finish 1. One side small door with proper hinged & amp, handle to clear wastes having overall Top (L & amp B) 1060*805mm Bottom, 1040*775mm Height 745mm. 2. Should have two equal compartment in trolley with lid over it 3. Should be CE Certified and Produced by an ISO 9001:2015 &; ISO 14001:2015Certified Unit. 4. The trolley should have three separate compartments for proper segregation of biomedical waste.

7.1 Puncture Proof Containers Needle and Syringe hub Destroyer (to comply with the Bio Medical Waste Management Rules. 2016-18) (With Disposable Sharp Container) 1.5 Liters (White) 1. Should be able to cut both the hub and needle in a single stroke without the use of any electricity or battery. 2. The cutter should be made of Stainless steel or alloy to be effective for at least 1,00,000 cuts with ergonomic design for easy cuts. 3. The complete unit must have facility to mount on wall or table (Flat Surface). 4. The cutter should be able to fit snugly over the puncture proof, tamper proof sharp container and should be so aligned with the container that the cut hub and needle should drop directly into the container. 5. Should be rectangular in shape & compatible to the sharp container of relevant sizes. 6. Dimensions of complete assembly shall not be less than L165mm x W160mm x H 320mm 7. Product must be CE European and ISO 13485:2013 certified & Manufacturer must be ISO 9001:2015 & WHO GMP Certified Company for quality & safety assurance. 8. The needle and syringe hub destroyer as well as the compatible Sharp containers must be quoted.

7.2 Puncture Proof Containers Puncture Proof & Temper Proof Disposable Sharp waste containers for Needle Destroyers (to comply with the Bio Medical Waste Management Rules. 2016-18) 1.5 Liters (White) 1. The container should be compatible with the needle cum hub cutter. 2. The container should be made of virgin polypropylene and should be white & translucent 3. It should be puncture proof, tamper proof and leak proof for sharp medical wastes with appropriate label as per provisions of Bio Medical waste Management Rules, 2016-18. 4. Should be a locking snap-top cap to ensure permanent safe locking before disposal, and should have temporary locking facility for safety till the container is full. 5. The puncture proof, tamper proof sharp container should be able to fit snugly with the cutter and should be so aligned with the cutter that the cut hub and needle should drop directly into the container. 6. Container capacity shall be 1.5Ltrs & should be rectangular & compatible to the cutter size. 7. Container Dimensions shall be not less than L161mm x W150 mm x H 131 mm. 8. Shall be autoclavable, and recyclable. 9. Containers should be stackable and compact for easy storage and transportation 10. Product must be CE European and ISO 13485:2013 certified & Manufacturer must be ISO 9001:2015 & WHO GMP Certified Company for quality & safety assurance. 11. Maximum fill level must be marked on the container The needle & hub cutter as well as corresponding puncture proof, tamper proof container, both must be quoted.

7.3 Puncture Proof Containers SHARP MEDICAL WASTE DISPOSABLE CONTAINERS 5.0 Liters (White & Blue) 1. The container should be made of virgin polypropylene and should be white & Blue & translucent & Rectangular in shape. 2. It should be puncture proof, tamper proof and leak proof for sharp medical wastes with appropriate label as per provisions of Bio Medical waste Management Rules, 2016. 3. Should be a locking snap-top cap to ensure permanent safe locking before disposal, and should have temporary locking facility for safety till the container is full. 4. Container Dimensions shall not be less than L 220mm x W 200mm x H202 mm. 5. Shall be autoclavable and recyclable. 6. Containers should be stackable and compact for easy storage and transportation. 7. Product must be CE European and ISO 13485:2013 certified & Manufacturer must be ISO 9001:2015 & WHO GMP Certified Company for quality & safety assurance. 8. Must Comply with the Bio Medical Waste Management Rules 2016-18.

7.4 Puncture Proof Containers SHARP MEDICAL WASTE DISPOSABLE CONTAINERS 12.0 Liters (White & Blue) 1. The container should be made of virgin polypropylene and should be white & translucent & Rectangular in shape. 2. It should be puncture proof, tamper proof and leak proof for sharp medical wastes with appropriate label as per provisions of Bio Medical waste Management Rules, 2016-18. 3. Should must have provision of two types of openings big opening 110mm x 170mm (minimum) with snap lock type for deposit of large waste like bottles etc. and small round opening rotating type 50mm (minimum) for depositing of small waste and also have indents for removal of needles & scalpels. 4. Should be a locking snap-top cap to ensure permanent safe locking before disposal, and should have temporary locking facility for safety till the container is full. 5. The Dimension of the container shall not be less than L300mm x W 255mm x H 250mm. 6. Shall be autoclavable and recyclable. 7. Containers should be stackable and compact for easy storage and transportation. 8. Product must be CE European and ISO 13485:2013 certified & Manufacturer must be ISO 9001:2015 & WHO GMP Certified Company for quality & safety assurance. Must Comply with the Bio Medical Waste Mgmt. 'Rules' 2016-18. Maximum fill level must be marked on the container.

8.1 Safety Box -Glass waste implants and Sharps 10 liters (Blue) Material - Solid Carton Board Type - Safety Box Height - Up to 305 mm (±10 mm) Product Type - Medical Waste Disposal Container Weight - Minimum 250 to 350 grams Handle Type - Short Handle Application - Hospital Use Usage & Applications - Hospital Waste Disposal Function - Waste Segregation • Bio-degradable board material with Lifting Handle. • Safe aperture to receive Sharp Waste. • Possible to close and seal the aperture any time during use. • Maximum filling line marking • Stable, spill proof & damage resistant. • Inner and outer lamination to prevent leakage • 3 Ply cardboard heavy strength and good load bearing capacity • Pictorial instructions to use. As per WHO Standards : WHO/PQS/E10/SB01.1

8.2 Safety Box -Glass waste implants and Sharps 20 liters (Blue) Material - Solid Carton Board Type - Safety Box Height - 350 mm to 400 mm (±15 mm) Product Type - Medical Waste Disposal Container Weight - 450 to 600 grams Handle Type - Short Handle Application - Hospital Use Usage & Applications - Hospital Waste Disposal Function - Waste Segregation • Bio-degradable board material with Lifting Handle. • Safe aperture to receive Sharp Waste. • Possible to close and seal the aperture any time during use. • Maximum filling line marking. • Stable, spill proof & damage resistant. • Inner and outer lamination to prevent leakage • 3 Ply cardboard heavy strength and good load bearing capacity • Pictorial instructions to use. As per WHO Standards : WHO/PQS/E10/SB01.1

· Free Servicing for 2 years by manufacturing company.

· The Bidder must submit the sample of quoted product for sample display.

· Biodegradable symbol must be on blue and green general waste bins.

· Biohazard symbol must be on BMW red, yellow, white and blue waste bins.

· Bidder must quote for all the items, no items to be left, else such bid shall be rejected completely for all the items.

Calculation of Local Content

Name of manufacturer Calculation by Manufacturer (Cost per unit of product)

Cost Component Cost (Domestic Component) (a) Total Cost (b) Percentage of Local Content c=(a/b)*100

III. Total Cost (Excluding tax and duties)

1. Cost (Domestic Component): Cost of domestic component may be calculated based on one of the followings depending on data available. Each of these calculations should provide consistent result.

a. Sum of the costs of all inputs which go into the product (including duties and taxes levied on procurement of inputs except those for which credit/ set-off can be taken) and have not been imported directly or through a domestic trader or an intermediary.

b. Ex-Factory Price of product minus profit after tax minus sum of imported Bill of Material used (directly or indirectly) as inputs in producing the product (including duties and taxes levied on procurement of inputs except those for which: credit/ set-off can he taken) minus warranty costs.

c. Market price minus post-production freight, insurance and other handling costs minus profit after tax minus warranty costs minus sum of Imported Bill of Material used as inputs in producing the product (including duties and taxes levied on procurement of inputs except those for which credit / set-off can be taken) minus sales and marketing expenses.

2. Total Cost: Total cost may be calculated based on one of the following depending on data available. Each of these calculations should provide consistent result.

a. Sum of the costs of all inputs which go into the product (including duties and taxes levied on procurement of inputs except those for which credit / set-off can be taken).

b. Ex-Factory Price of product minus profit after tax, minus warranty costs.

c. Market price minus pent-production freight, insurance and other handling costs minus profit after tax, minus warranty costs minus sales and marketing expenses.

Bidder must submit financial bid in .xls (Excel workbook 97-2003 workbook) only

Sr. Details of the documents to be submitted Page Remarks of the bidder

1st Form-A: CONTACT DETAILS

2nd Form-B: SIGNINING AUTHORITY

3rd BID SECURITY

4th Form-C: TENDER ACCEPTANCE CERTIFICATE

5th Form-D: DETAILS OF THE ORIGINAL MANUFACTURERS

6th Form-E: AUTHORIZATION CERTIFICATE

7th Form-F: NO DEVIATION CERTIFICATE

8th Form-G: RATE REASONABLENESS CERTIFICATE

9th Form-H: NO DEBARMENT / NON-BLACKLISTING CERTIFICATE

10th Form-I: LAND BORDER DECLARATION

11th Form-J: INTEGRITY PACT

12th Form-K: BANK DETAILS / MANDATE CERTIFICATE

13th Valid REGISTRATION CERTIFICATE / CERTIFICATE OF INCORPORATION

14th GST REGISTRATION CERTIFICATE

15th AADHAAR CARD

16th FINANCIAL TURNOVER [2022–23, 2023–24, 2024–25]

17th INCOME TAX RETURN ACKNOWLEDGEMENT [2023-24, 2024-25, 2025-26]

18th PROFIT & LOSS A/C AND BALANCE SHEET [2022-23, 2023-24, 2024-25]

19th EXPERIENCE

20th ISO 9001-2015 Certification

21st Valid IMPORT LICENSES

22nd PRODUCT BROCHURE, CATALOGUE, TECHNICAL DATA SHEET, LITERATURE, DRAWINGS, MAGAZINES/PUBLICATIONS

23rd NIT Document and its Corrigendum(s)

24th Any other relevant document

TOTAL NUMBER OF PAGES IN TECHNICAL BID DOCUMENT

CODE Item Name Size & Color Specification Original Manufacture Firm's name Make-Model Whether complying with NIT’s Specs (Yes/No) Mention here - if bidder is quoting their item with any different specification or size ?

1 Medical Waste Disposable Containers 34 Litres (Blue Colour) 1. The container shall be made of high-impact virgin polypropylene, blue in colour, and may be round or rectangular to ensure stability at higher volumes. 2. The nominal capacity of the container shall be 34 Litres. 3. The container shall be puncture-proof, tamper-proof, and leak-proof, specifically designed for metallic implants (given Biopsy needle, lumber puncture needle Ortho implants etc). It shall bear the Biohazard symbol and comply strictly with the Bio-Medical Waste Management Rules. 4. The container shall feature a wide-mouth opening (minimum 200 mm diameter/width) with a reinforced snap-lock lid for large bottles. It must include a dedicated needle/scalpel removal port integrated into the lid. 5. The lid must feature a dual-locking system: a temporary closure for daily use and a hermetic permanent seal that prevents reopening once the container reaches the maximum fill level. 6. Dimensions: Height: 450–500 mm; Upper Diameter/Width: 350–380 mm; Lower Diameter/Width: 280–320 mm. (Wall thickness must be minimum 2.8 mm to prevent bulging underweight). 7. The unit must be equipped with heavy-duty ergonomic handles (molded into the body) to allow safe two-handed lifting and transport. 8. The container shall be autoclavable (up to 121°C or 134°C) and made of environment-friendly, recyclable material. 9. The product must be CE (European) certified, ISO 13485 certified, and UN 3291 approved (for transport of dangerous goods). The manufacturer must hold ISO 9001:2015 and WHO-GMP certification. 10. A highly visible "Maximum Fill Level" line must be embossed or permanently printed at approximately 75–80% of the total height. 11. Labelling & Documentation Template: Each container must have a permanent label area (or a high-adhesion sticker) with the following fields: a. WASTE TYPE: [Infectious / Cytotoxic / General] b. WEIGHT: ________ kg c. DATE OF SEALING: //20__ d. WARD/DEPT: ____________ e. SIGNATURE: ____________ 12. Note:- The supplier may be asked to arrange a demonstration of their items for which rates have been quoted, to the AIIMS Jodhpur, if required. The expenditures incurred for demonstration of the items will be borne by the supplier.

2 BMW Bins 60 Liter (Red, Yellow, Green & Blue Bins with Trolley 1. Stainless steel frame with S.S foot operating system. Strong SS front support with proper rubber finished. 2. Available in one bin. 3. Dustbin body internally positioned. 4. One piece heavy duty Rotomoulding. Material 1. Made of good quality virgin, UV Resistant, Special grade LLDPE grade of polyethylene dustbin made up of plastic as per EN standard in all full body. 2. Made of anti-rust material, must be anti-microbial treated to avoid colonization of microbes 3.Must have a built-in handle and two smooth casters for easy movement 4. The bin must have molded top shoulder & pillar type rib design for extra strength. Dimensions 1. Front round double SS of rectangular top with holding lid support stopper of about 290mm*330(+/-10mm) with collar & rectangular bottom about 310mm*310 (+/-10 mm), Height 750 mm (+/-10mm) for 60 Liter with suitably designed with strong SS side plate lid support . 2. SS Pipe/Rod used for cage, handle and for operation of lid shall not be less than 7 mm diameter ass rod & steel grade 202. 3. Double angle rail for greater safety when emptying & slant down side large thick rod 3 cm (+/-.2 cm) handle for excellent control with user comfort. Workmanship & Finish 1. The bins must comply CE /EN / ISO 14001:2015 / CDSCO Certified company for quality & safety assurance.

3 BMW roller bins 120 liter (Red, Yellow, Green and Blue Bins with Trolley 1. Stainless steel frame with SS foot operating system. Strong SS front support with proper rubber finished. 2. Available in one bin. 3. Dustbin body internally positioned. 4.One piece heavy duty Rotomoulding, Bins with wheels Should be available in full body colour coding as per BMW rules 2016, 2018, 2019 Dimensions Front round double SS of rectangular top with holding lid support stopper of about 440mm*450(+/-10mm) with collar & rectangular bottom about 420mm*420 (+/-10 mm), Height 1025 mm (+/-10mm) for 120 Liter with suitably designed with strong SS side plate lid support. Workmanship & Finish 1. The bins must comply CE European / ISO 14001:2015 / CDSCO Certified company for quality & safety assurance.

4 Bio Medical Bins 20 liters (Red, Yellow, Green and Blue) Material 1. Made of good quality LLDPE virgin, UV Resistant polymer material. 2.Thickness of bins shall be minimum 5 mm (+/- 0.2mm) 3.Made of anti-rust food paddle connector for long life Durable Hinge Design Self-explanatory stickers of waste to segregate in it. Dimensions 1. LLDPE Bucket of Circular top with holding lid support stopper of about 335 mm (+/-10mm) with Built-in RFID chips nests collar & circular bottom about 278mm (+/-10 mm), Height 320 mm (+/-10mm) with suitably designed with strong SS rifted lid. 2. SS Pipe/Rod used for cage, handle and for operation of lid shall not be less than 7 mm di ass rod. 3. SS Pipe/Wire rod shall be not less than 7 mm diameter & steel grade 202. 4. SS Square (hollow pipe) 10 Nos. steel grade 202 of 20*20 mm shale be provided at the bottom for steady placement of the bin. 20 liter - Bin Capacity of 20 Liters & Dimensions not less than L393 mm x W 396 mm x H 412 mm. Workmanship & Finish 1. Lid of the bin shall be foot operated & SS bottom rod of foot operated mechanism shall be minimum 10 mm. 2. All Screw should be fridge by liquid rubber gasket & all in full body colors-Yellow, Red, Green, Black, Blue & White. 3. Bin Shall be printed as per requirement of Bio Medical Waste Management Committee. 4. Dimensional accuracy Ready to Use. 5. Produced by an ISO 45001:2018 (ISO for Manufacturing of Dustbin) & 14001:2015 Certified Unit. 6. The bins must comply UN /NFX / CE European / ISO 14001:2015 / CDSCO Certified company for quality & safety assurance

5.1 Bio Medical Bins for Trolley 5 Liter (Red, Yellow, Green & Blue) Material 1. Plastic bins LLDPE made from virgin polymer material. Thickness of bins shall be minimum 3 mm (+/- 0.2mm) LLDPE Bucket of circular top of about 180 MM (+/- 10 MM) with Built-in-RFID chips nests for identification & weighing system, circular bottom of about 160 MM (+/- 10MM) Height 325 MM (+/- 10MM) can be hang in trolley side properly in all. Workmanship & Finish 1. The bins must CE European / ISO 14001:2015 / CDSCO Certified company for quality & safety assurance.

5.2 Bio Medical Bins for Trolley 8 Liter (Red, Yellow, Green & Blue) Material 1. Plastic bins LLDPE made from virgin polymer material. Thickness of bins shall be minimum 3.5 mm (+/- 0.2mm) LLDPE Bucket of circular top of about 220 MM (+/- 10 MM) with Built-in-RFID chips nests for identification & weighing system, circular bottom of about 190 MM (+/- 10MM) Height 360 MM (+/- 10MM) can be hang in trolley side properly in all. Workmanship & Finish 1. The bins must CE European / ISO 14001:2015 / CDSCO Certified company for quality & safety assurance.

6 Mobile Multipurpose Bin 650 -750 Liter (Yellow/ Red) Material Made by high performance Green color plastic material container with strong single MS rod Lid & amp; Supporting MS Structure having four rubberized wheel and Side handle Workmanship & Finish 1. One side small door with proper hinged & amp, handle to clear wastes having overall Top (L & amp B) 1060*805mm Bottom, 1040*775mm Height 745mm. 2. Should have two equal compartment in trolley with lid over it 3. Should be CE Certified and Produced by an ISO 9001:2015 &; ISO 14001:2015Certified Unit. 4. The trolley should have three separate compartments for proper segregation of biomedical waste.

7.1 Puncture Proof Containers Needle and Syringe hub Destroyer (to comply with the Bio Medical Waste Management Rules. 2016-18) (With Disposable Sharp Container) 1.5 Liters (White) 1. Should be able to cut both the hub and needle in a single stroke without the use of any electricity or battery. 2. The cutter should be made of Stainless steel or alloy to be effective for at least 1,00,000 cuts with ergonomic design for easy cuts. 3. The complete unit must have facility to mount on wall or table (Flat Surface). 4. The cutter should be able to fit snugly over the puncture proof, tamper proof sharp container and should be so aligned with the container that the cut hub and needle should drop directly into the container. 5. Should be rectangular in shape & compatible to the sharp container of relevant sizes. 6. Dimensions of complete assembly shall not be less than L165mm x W160mm x H 320mm 7. Product must be CE European and ISO 13485:2013 certified & Manufacturer must be ISO 9001:2015 & WHO GMP Certified Company for quality & safety assurance. 8. The needle and syringe hub destroyer as well as the compatible Sharp containers must be quoted.

7.2 Puncture Proof Containers Puncture Proof & Temper Proof Disposable Sharp waste containers for Needle Destroyers (to comply with the Bio Medical Waste Management Rules. 2016-18) 1.5 Liters (White) 1. The container should be compatible with the needle cum hub cutter. 2. The container should be made of virgin polypropylene and should be white & translucent 3. It should be puncture proof, tamper proof and leak proof for sharp medical wastes with appropriate label as per provisions of Bio Medical waste Management Rules, 2016-18. 4. Should be a locking snap-top cap to ensure permanent safe locking before disposal, and should have temporary locking facility for safety till the container is full. 5. The puncture proof, tamper proof sharp container should be able to fit snugly with the cutter and should be so aligned with the cutter that the cut hub and needle should drop directly into the container. 6. Container capacity shall be 1.5Ltrs & should be rectangular & compatible to the cutter size. 7. Container Dimensions shall be not less than L161mm x W150 mm x H 131 mm. 8. Shall be autoclavable, and recyclable. 9. Containers should be stackable and compact for easy storage and transportation 10. Product must be CE European and ISO 13485:2013 certified & Manufacturer must be ISO 9001:2015 & WHO GMP Certified Company for quality & safety assurance. 11. Maximum fill level must be marked on the container The needle & hub cutter as well as corresponding puncture proof, tamper proof container, both must be quoted.

7.3 Puncture Proof Containers SHARP MEDICAL WASTE DISPOSABLE CONTAINERS 5.0 Liters (White & Blue) 1. The container should be made of virgin polypropylene and should be white & Blue & translucent & Rectangular in shape. 2. It should be puncture proof, tamper proof and leak proof for sharp medical wastes with appropriate label as per provisions of Bio Medical waste Management Rules, 2016. 3. Should be a locking snap-top cap to ensure permanent safe locking before disposal, and should have temporary locking facility for safety till the container is full. 4. Container Dimensions shall not be less than L 220mm x W 200mm x H202 mm. 5. Shall be autoclavable and recyclable. 6. Containers should be stackable and compact for easy storage and transportation. 7. Product must be CE European and ISO 13485:2013 certified & Manufacturer must be ISO 9001:2015 & WHO GMP Certified Company for quality & safety assurance. 8. Must Comply with the Bio Medical Waste Management Rules 2016-18.

7.4 Puncture Proof Containers SHARP MEDICAL WASTE DISPOSABLE CONTAINERS 12.0 Liters (White & Blue) 1. The container should be made of virgin polypropylene and should be white & translucent & Rectangular in shape. 2. It should be puncture proof, tamper proof and leak proof for sharp medical wastes with appropriate label as per provisions of Bio Medical waste Management Rules, 2016-18. 3. Should must have provision of two types of openings big opening 110mm x 170mm (minimum) with snap lock type for deposit of large waste like bottles etc. and small round opening rotating type 50mm (minimum) for depositing of small waste and also have indents for removal of needles & scalpels. 4. Should be a locking snap-top cap to ensure permanent safe locking before disposal, and should have temporary locking facility for safety till the container is full. 5. The Dimension of the container shall not be less than L300mm x W 255mm x H 250mm. 6. Shall be autoclavable and recyclable. 7. Containers should be stackable and compact for easy storage and transportation. 8. Product must be CE European and ISO 13485:2013 certified & Manufacturer must be ISO 9001:2015 & WHO GMP Certified Company for quality & safety assurance. Must Comply with the Bio Medical Waste Mgmt. 'Rules' 2016-18. Maximum fill level must be marked on the container.

8.1 Safety Box -Glass waste implants and Sharps 10 liters (Blue) Material - Solid Carton Board Type - Safety Box Height - Up to 305 mm (±10 mm) Product Type - Medical Waste Disposal Container Weight - Minimum 250 to 350 grams Handle Type - Short Handle Application - Hospital Use Usage & Applications - Hospital Waste Disposal Function - Waste Segregation • Bio-degradable board material with Lifting Handle. • Safe aperture to receive Sharp Waste. • Possible to close and seal the aperture any time during use. • Maximum filling line marking • Stable, spill proof & damage resistant. • Inner and outer lamination to prevent leakage • 3 Ply cardboard heavy strength and good load bearing capacity • Pictorial instructions to use. As per WHO Standards : WHO/PQS/E10/SB01.1

8.2 Safety Box -Glass waste implants and Sharps 20 liters (Blue) Material - Solid Carton Board Type - Safety Box Height - 350 mm to 400 mm (±15 mm) Product Type - Medical Waste Disposal Container Weight - 450 to 600 grams Handle Type - Short Handle Application - Hospital Use Usage & Applications - Hospital Waste Disposal Function - Waste Segregation • Bio-degradable board material with Lifting Handle. • Safe aperture to receive Sharp Waste. • Possible to close and seal the aperture any time during use. • Maximum filling line marking. • Stable, spill proof & damage resistant. • Inner and outer lamination to prevent leakage • 3 Ply cardboard heavy strength and good load bearing capacity • Pictorial instructions to use. As per WHO Standards : WHO/PQS/E10/SB01.1

· Free Servicing for 2 years by manufacturing company.

· The Bidder must submit the sample of quoted product for sample display.

· Biodegradable symbol must be on blue and green general waste bins.

· Biohazard symbol must be on BMW red, yellow, white and blue waste bins.

· Bidder must quote for all the items, no items to be left, else such bid shall be rejected completely for all the items.