C/o Community Centre at Upper Galour (Gahalian) Dev. Block Dehra Distt. Kangra H.P.

Amount

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etc; whereever required within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in work in edge of slab and breaks in floors and walls of any thickness within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8(One cement: Four sand: Eight graded cursed stone aggregate 40mm) (fourty millimeters nominal size) mechanically mixed and curing complete, in court yard excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum crushing strength of 20N/mm square with minimum cement contents of 310 kg (Three hundred ten kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Columns, pillars posts and struts etc; where ever requireed within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum crushing strength of 20N/mm square with minimum cement contents of 310 kg (Three hundred ten kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers including mouldings, cornices etc; where ever requireed within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum crushing strength of 20N/mm square with minimum cement contents of 310 kg (Three hundred ten kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor level within all leads, lifts of materials and other Incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete including cost of binding wires complete and other incidentals due for its completion for all floors within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Second Class Bricks work using common burnt clay building bricks in super-structure upto all floor level with Cement Mortar 1:6 (One Cement : Six Sand) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Second class half brick masonry using common burnt clay building bricks in super-structure above plinth level to floor all level in cement mortar 1:4 (One cement isto four sand) with hoop iron and curing complete, .as per specification, approved drawing, design, as per entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Sal wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position complete as per specifications drawing and design, as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing 40X3mm (forty into three millimeters )flat iron hold fast 40cm(forty centimeter) long including fixing to frame with 10mm(ten millimeter) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30X10X15cm (thirty into ten into fifteen centimeter)1:3:6(one cement :three sand :six graded stone aggregate 20mm nominal size), as required within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimeter) thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, including black enameled iron butt hinges with necessary screws of second class deodar wood including carriage of material as required within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimeters)thick wire gauge shutters using galvanised M.S. Wire gauge of I.S. Gauge designation 85 (Eighty five ) G. With wire of dia 0.56mm (zero point five six milometers )for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screw of second class deodar wood including carriage within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing & fixing anodized matt finished aluminium Pilot/Sheet or equivalent sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. whithin all leads, lifts of materials and other incidentals. As per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

300x16mm (Three hundred fifty into Sixteen milimetres) size

250x16mm (Two hundred fifty into Sixteen milimetres) size

Providing and fixing matt finished anodized aluminium Tower bolts (Barrel type) Pilot/Sheel or its equivalent anodized transparent or dyed to required colour and shade with necessary screws etc. within all leads, lifts of materials and other. Incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

150x10mm (one hundred fifty into Ten milimetres) size

100mm (One hundred milimetres) size

Providing and fixing aluminium handles Pilot/Sheel or its equivalent anodized transparent or dyed to required colour and shade with necessary screws etc. within all leads, lifts of materials and other. Incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

125mm (One hundred twenty five milimetres) size

100mm (One hundred milimetres) size

6mm (Six milimetres) thick cement plaster in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights within all leads, lifts of materials and other incidentals as per approved approved specification, drawings and design. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Stone solling dry hand packed tightly under Floor in court yard within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Applying priming coat on new wood and wood based surfaces with ready mix paint brushing wood pink primer after and including preparing he surfaces by thoroughly cleaning oil grease dirt an other foreign matter sand papering and knotting etc complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Painting two coats (excluding priming coat)on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt dust and other foreign matter send papering and stopping with enamel paint other than white within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing mild steel plain grills of required pattern in wooden frames of window etc. with mild steel flat square of round bars with round headed bolts and nuts or screw etc. including carriage of material as required within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as required within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Distempering (two coats ) with oil bound washable distemper of approved brand and manufacture and required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with alkali resistance primer of approved brand and manufacture after thoroughly brushing surface free from mortar dropping and other foreign matter and also including preparing the surfaces even and sand papered smooth priming coat with distemper primer within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Applying one coat of acrylic primer (spectrum or equivalent of superior quality on new concrete /masonry / plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Finishing wall with weather proof exterior grade emulsion of approved design (apexultima) or its equarlied on udecorated wall surfaces (Two Coats )to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including sand paper smooth as required within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 10 mm ( ten mm) thick water proof stain and impact resistent heavy duty (double charge) vetrified tiles nitco or equivalent 600x600x10 mm thick manufactured of approved shade and colour in flooring treads of steps and landing over 12 mm ( twelve milimeters) thick cement mortar 1:3 ( one cement : three sand) and finished with flush pointing in white cement. within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying Duro stone vetrified tiles nitco or equivalent 300x300x10 mm thick manufactured of approved shade and colour in flooring treads of steps and landing over 12 mm ( twelve milimeters) thick cement mortar 1:3 ( one cement : three sand) and finished with flush pointing in white cement. within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing Galzed tiles of size 300mm x 150 mm x 6mm thick in skirting risers of steps and dado on 12mm (twelve millimeter ) thick cement mortar 1:3 (one cement : three sand ) and finished with flush pointing in white cement. within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work, including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint in gratings framed gaurds, bars, ladders, railing, brackets and similar work, within all leads, lifts of materials and other. Incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge

Providing and fixing 0.35mm (Zero decimal three five milimetres) thick corrugated durashine liner steel sheet in linning / ceiling with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge

Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all width or 0.45mm (Zero decimal four five millimetres) thick Tata durashine sheet roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts of materials and other incidentals as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge.

Providing and fixing valleys 90 cm (ninety centimetres) over all width or 0.45mm (Zero decimal four five millimetres) thick Tata durashine sheet roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester organic coating of 20 (Twenty)microns over 5 (five) micron primer coating, back coat of polyster of 5 (Five) microns over 5 (five) micron primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing plain M.S. B.P. iron sheet 2mm (Two milimetres) thick fixed in eaves board / facia / soffits / ceiling including jointing with gas/ electric welding in position complete (frame work is to be measured and paid for separately within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge

Providing and fixing 300mm. (Three hundred millimeter) wide 300mm. (Three hundred millimeter) deep clear plain G.I. Sheet gutter of Tata with brackets 40x3mm (Forty into three millimeter) size, bolts nuts and washers etc. including dome shape gratins and making necessary connections with rain water pipe complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Kota stone slab flooring 25mm (twenty-five milimetres) thick over 20 mm (twenty mili metres) (average) base laid on cement mortar 1:4 (one Cement : four Coarse sand), and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing etcetra complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Kota stone slabs 20 mm (twenty mili metres) thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (oine cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing etcetra complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying factory made chamfered edge Cement Concrete paver blocks 60mm thick cement concrete of M-35 grade with approved colour, design & pattern. in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces, with ready mixed paint, brushing to give an even shade including cleaning of all dirt,dust and other foreign matter,sand papering and stopping including carriage of material in all leads and lifts. : with enamel paint other than white within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing on wall face 100mm (One hundred milimetres) diametres P.V.C. rain water pipes of working pressure 4/6kg (four / six kilogramme) per square centimetre as per ISI finolex / Relience / vectus pipe confirming to IS code 13592 for rain water pipe fixed with approved adhesive including filling the joints complete within all leads, lifts of materials and other incidentals, and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing on wall face P.V.C. acessories for rain water pipes of working pressure 4/6kg (four / six kilogramme) per square centimetre as per ISI finolex / relience / vectus or its equivalent for rain water pipe fixed with approved adhesive including filling the joints complete within all leads, lifts of materials and other incidentals. and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

100mm (One hundred milimtres) diametrees PVC Plain bend.

Providing and fixing M.S. holder bat clamps of approved design to P.V.C.. rain water pipe embedded in and including cement concrete blocks 10x10x20cm of 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etc; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

100mm (One hundred milimetres) diameter.

VARINDER KUMAR

SAURABH SHARMA GOVT. CONTT.

Rajeshwar Singh