GE/KHU-55/2023-24 PROVN OF 01 X BATHROOM WITH 03 X URINAL 01 X TOILET WITH 02 X WASH BASIN FACILITY AND PROVN OF ONE MEAT ROOM NEAR COOK HOUSE BUILDING AND SPECIAL REPAIR IN BLDG ORs LIVING UNDER GE KHUMBATHANG

Amount

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc and n exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type soil complete all as specified and directed by Engrs-in-Charge.

Surface excavation (not exceeding) 30cm deep and averaging 15cm deep and getting out in any type of soil , complete all as specified and directed by Engrs-in-Charge.

Plain cement concrete type D-2 (1:4:8), 40 mm graded aggregate in foundations, filling and mass complete all as specified and directed by Engrs-in-Charge.

Precast cement concrete type C-1, 1:3:6 using 20mm graded stone aggregates, block masonry with solid blocks, exc 10 cm width and setting in cement mortar 1:4 complete all as specified and directed by Engrs-in-Charge.

Rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engrs-in-Charge.

Rendering 15 mm thick in two layer (10+5mm) in CM (1:4) on fair surfaces of brick or concrete work and finished even & fair with using WPC on walls complete all as specified and directed by Engrs-in-Charge .(Note: WPC measured and paid separately)

Preparation of new plastered surfaces on walls and applying two coats of Oil Bond distemper complete all as specified and directed by Engrs-in-Charge.

Preparation of new plastered surfaces on walls and applying two coats of cement based paint complete all as specified and directed by Engrs-in-Charge.

Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil complete all as specified and directed by Engrs-in-Charge.

Removing excavated material (soils) exceeding 250 m but n.exc. 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engrs-in-Charge.

Hard core of broken stones or boulders of gauge exc 63mm & n'exc 100mm, deposited, spread and levelled in layers n.exc 15cm thick incl watering and rolled to true surface complete all as specified and directed by Engrs-in-Charge.

Cement concrete 25mm thick type B-0, 1:2:4 (using 12.50mm graded aggregate) finishing concrete surface even and smooth with using extra cement complete all as specified and directed by Engrs-in-Charge.

M&L for screed or bedding layer 20 mm thick in cement mortar 1:4, finished even and fair on floors for laying floor finishes complete all as specified and directed by Engrs-in-Charge.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm double side prelam PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 150 mm long , extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of Aluminium anodised sliding door bolt 250 mm long plate type stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 500 litres capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) horisted and fixed in position all as specified in SSR Part -I complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm borecomplete all as specified and directed by Engrs-in-Charge.

Supply and fixing of Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings ( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repairs, complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of PVC connection 15mm size with PTMT Nut of length 450mm complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 15mm Pillar taps, fany type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of Bib taps , cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 100 mm dia Bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engr-in-Charge.

Supply and fixing of sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engrs-in-Charge.

Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W (Gde-E- 250) quality-A and painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication, complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engrs-in-Charge.

M&L 9 mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in ceiling complete all as specified and directed by Engrs-in-Charge.

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 13 and n exc 25 Sqcm, clean sawn, secured with nails or brads complete all as specified and directed by Engrs-in-Charge.

All as per item no 34 above but bullnosed, splayed, chamfered or rounded on one edge or face, on second class softwood area exc 6 and n exc 13 Sqcm complete all as specified and directed by Engrs-in-Charge.

M&L second class soft wood, plain fillets, square or rectangular in section of area n exc 03 Sqcm, clean sawn, secured with nails or brads complete all as specified and directed by Engrs-in-Charge.

Taking down chowkats or frame with shutters ( without taking off shutter from frame ) n exc 1.50Sqm each complete all as specified and directed by Engrs-in-Charge.

Taking down chowkats or frame with shutters ( without taking off shutter from frame ) exc 1.50Sqm nt Exc 4.0 sqm each complete all as specified and directed by Engrs-in-Charge.

M&L second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints, etc. complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 35mm thick 2nd class HW glazed and skelton shutters, open rebated and prepared to receive glass gauge, etc (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part I, section 8, clause 8.24 (a) complete all as specified and directed by engr in charge.

Supply and fixing for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed by engr in charge.

Hacking out old broken glass (any thickness, size, quality) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 4.8mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 150 mm, long, Aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of Galvanized mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. complete all as specified and directed by Engrs-in-Charge.

Dismantling, wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

Dismantling timber in fillets, rails, posts, rafters, purlins etc under 40 Sq cm in section in any position unframed work complete all as specified and directed by Engrs-in-Charge.

M&L 12 mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in walls complete all as specified and directed by Engrs-in-Charge.

Preparation previously untreated wood and wood based materials of any decription over 10 cm width/ grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engrs-in-Charge.

Rendering 15mm thick plaster in cm (1:4) on other then fair faces of brick work or concrete surfaces including finishing even & fair without using extra cement complete all as specified and directed by Engrs-in-Charge.

Cement concrete, 50mm thick, type C-1, 1:3:6 (20 mm graded stone aggregate) as in floors & pavings, plinth protection, path, etc. finishing top surface even and fair complete all as specified and directed by Engrs-in-Charge.

Plain cement concrete type D-2, 1:4:8, 100mm thick (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by Engrs-in-Charge.

M&L for 15mm thick screed bed or bedding layer of cement mortar in CM (1:4) for laying of floor tiles complete all as specified and directed by Engrs-in-Charge.

M&L for non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm (coloured tiles) in floor, set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge.

M&L for glazed ceramic tiles coloured (300 x 200 x 7 to 8mm thick) on walls, set & jointed in neat cement slurry & pointed colour cement to match and rendering 10mm thick on fair faces with CM (1:4) complete all as specified and directed by Engr in Charge.

Supply and fixing of Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings ( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 15mm bore Bib tap CP fancy type, brass cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe etc complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 4 mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of cast copper alloy fancy type stop valve/ angle valve 15 mm dia complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with hear moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail & bottom rail panelling of plain colour complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 125mm size Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 125mm size Aluminium handles, cast type anodised complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 2000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top including all fittings except ball valve) hoisted & fixed in position complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of 20mm dia ball brass valves high pressure with polythene float valve & fly nut screwed for iron pipe or for brass ferrule complete all as specified and directed by Engrs-in-Charge.

Preparation of new plastered surface and applying three coats of white wash on new plastered surfaces complete all as specified and directed by Engrs-in-Charge.

Preparation of new plastered surface and applying two coats of cement base paint over priming coat on new plastered surfaces complete all as specified and directed by Engrs-in-Charge.

Supply and fixing in repair vitreous china wash basin white, flat back, size 550 X 400 mm excluding taps, waste, chain and plug but including brackets, cutting for and pinning in as required complete all as specified and directed by Engrs-in-Charge.

Supply and fixing in repair Pillar taps fancy type, 15mm Bore dia of pipe, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engrs-in-Charge.

Supply and fixing in repair 15mm dia PVC connection pipe 450mm ling with two nos fly PTMT nuts etc complete all as specified and directed by Engrs-in-Charge.

Supply and fixing in repair vitreous china squatting pan "ORISSA" pattern size 580 x 440mm white ('P' trap 110 mm dia) with integral foot rests complete including provn of lime concret beding and making good for floor complete all as specified and directed by Engrs-in-Charge.

Supply and fixing in repair PVC low level flushing cistern 10 ltrs capacity with float ball valve and bracket including fixing of flush pipe complete all as specified and directed by Engrs-in-Charge.

Supply & Fixing Pre-painted powder coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engrs-in-Charge.

Supply & fixing for PVC (SWR) bend any radius 75 mm bore complete all as specified and directed by Engrs-in-Charge.

Supply & fixing for brass chromium plated brass tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed by Engrs-in-Charge.

Supply & fixing in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and directed by Engrs-in-Charge.

Supply & fixing PVC (SWR) 110 mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engrs-in-Charge.

Supply & fixing PVC (SWR) bends 110 mm dia complete all as specified and directed by Engrs-in-Charge.

Supply & fixing Vitreous China Urinal, full stall type, white (excluding flushing cistern) including flush pipe and waste pipe) complete all as specified and directed by Engrs-in-Charge.

M&L for Form work to sides of concrete foundations footings, bases of columns, rafts and raft beams sides and soffits of foundations and plinth beams and similar work rough finished surfaces, complete all as specified and directed by Engrs-in-Charge.

M&L for Steel reinforcement 10mm dia and over, TMT bars, cut to length, bent to shape required including, cranking, bending, spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engrs-in-Charge.

M&L for steel reinforcement 6 to 8mm dia and over, TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engrs-in-Charge.

M&L for RCC (nominal mix) Type B1 (1:2:4) (using 20 mm graded stone aggregates) as in foundations, incl rafts, footings, foundation, beams, plinth beams, bases for columns, etc complete all as specified and directed by Engrs-in-Charge.

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc complete all as specified and directed by Engrs-in-Charge.

Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : - (a) One light point/ one fan point/ Bell Point controlled by one switch

(b) One 3 pin socket outlet, 5 Amp independent

( c) One 3 pin socket outlet, 5 Amp same board

All as per item No 85 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth complete all as specified and directed by Engrs-in-Charge.

Supply & fixing in repair switch piano flush type single pole one way 5 Amps all as specified complete all as specified and directed by Engrs-in-Charge.

Supply & fixing in repair switch socket combination multi purpose, 5 amp complete all as specified and directed by Engrs-in-Charge.

Supply & fixing in repair Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked complete all as specified and directed by Engrs-in-Charge.

Supply & fixing in repair holder any type for batten fitting complete all as specified and directed by Engrs-in-Charge.

Supply & fixing in repair switch socket combination switch socket outlet 3 pin, 16 amp flush type complete all as specified and directed by Engrs-in-Charge.

Supply & fixing in repair wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceiling rose complete all as specified and directed by Engrs-in-Charge.

Supply & fixing LED light fittings 1x18 watt, 220 volt AC decorative box type with driver, holder including LED tube connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engrs-in-Charge.

Supply & fixing in repair sheet metal enclosure SPN DB 08 way,single phase 240 volts double door with 200 amp rated bus bar complete all as specified and directed by Engrs-in-Charge.

Supply & fixing pressed sheet metal enclosure (MCB DB) single door,single pole and neutral 240 Volt with 200 Amps rated bus bar complete for 04 way complete all as specified and directed by Engrs-in-Charge.

Supply & fixing exhaust fan, steel body AC single phase, 230 volt of size 300 mm sweep with blades and frame and louvers connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engrs-in-Charge.

Supply and fix in repair for miniature Circuit breaker (MCB) single pole, 6 to 32 Amp 240 volt C curve 10 KA, complete with connection testing and commissioning incl taking down old one complete all as specified and directed by Engrs-in-Charge.

Supply and fixing miniature Circuit breaker (MCB) single pole & neutral 240 volt C curve 10 KA, 32 Amps capacity complete all as specified and directed by Engrs-in-Charge.

Supply and fixing in repair for Circuit breaker single pole & neutral 240 volt C curve 10 KA 40 to 63 Amps capacity complete with connection testing and commissioning incl taking down old one complete all as specified and directed by Engrs-in-Charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed by Engrs-in-Charge.

Supply and fixing of two single core 6 Sq mm for Sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100Volts grade in and including PVC casing capping/ PVC conduit with fixing accessories including one run of 6 Sq mm copper conductor complete all as specified and directed by Engr in Charge. (Note - Two runs of 6 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.)

Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways , complete all as shown in electric plate No 3 of MES SSR Part- I complete all as specified and directed by Engr in Charge.

Deduct Credit for Demolished/Dismantled material Rs (-) 2,330.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S Web Company

KASHMIR FAIR DEAL SERVICES

M/S ALI MOHD AND SONS