PROVISION OF RCC COVERED SHED IN FRONT OF BUILDING NO P_2 AT CGDHQ_15 OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide n.exc 1.5m deep and getting out in soft disintegrated rock complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L RCC M-30 (using 20mm garded stone agg) as in foundation, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.,basement slabs, under reamed piles and mass concrete, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L RCC M-30 (using 20mm graded stone agg) as in column, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M-30 (using 20mm garded stone agg) as in beams, cantilevers, bands, coping,bressummers, lintels and the like complete all as specified and directed.

M&L RCC M-30(using 20 mm graded stone agg) as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to the sides of columns for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to sides and soffits of beams, lintels, including supports, overhangs, etc, also slpays between floors and beams, etc. and the like for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats,breaks in floors,window cills,concrete railings,openings in concrete walls,floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls,horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide rough finished surfaces of concrete complete all as specified and directed.

M&L for precast cement concrete type C1 1:3:6 (20 mm graded aggregate) block masonry with solid blocks, exc.10 cm in width and setting in mortar 1: 6 complete all as specified and directed.

M&L for precast cement concrete type C1 1:3:6 (20 mm graded aggregate) block masonry with solid blocks, not exc.10 cm in width and setting in mortar 1: 4 complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in two layers ,10 mm thick in CM 1: 6 and 5 mm thick in CM 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. . Note : Water proofing compound will be measured and paid separately.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1: 6 finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1: 4 finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 5mm thick on fair faces of ceiling concrete surfaces in CM 1: 4 finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

M & L Mild steel TMT CRS bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT CRS bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two or more coats of 100% Premium Acrylic emulusion paint having VOC 50gm/litre and UV resistance as per IS 15489 : 2004, Alkali and Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with Silicon Aditives @ 1.43 litre/10sqm over aand including priming coat of exterior primer applied @ 0.90 litre/10 sqm ovre new surfaces complete all as specified and directed.

M & L 3mm thick wall care putty on wall complete all as specified and directed.

M & L 3mm thick wall care putty on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer, complete all as specfied and as directed.

M & L for providing 25 mm thick cement concrete type BO 1:2:4 (12.50 mm graded aggregate ) as in leveling course complete all as specified and directed.

M & L Virified Ceramic tiles dark shade,double charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer in Cement Mortar 1:6 10 mm thick for laying floor finishes complete all as specified and directed.

M & L Broken stone or boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L for moorum/red bajri filling in floors or pavings laid in layers n exc 15 CM, spread, levelled and blinded with earth and rammed including watering complete all as specified and directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer in Cement Mortar 1:6 10 mm thick complete all as specified and directed.

M & L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat in cement mortar 1:4 , 10 mm thick complete all as specified and directed.

M & LGranite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L 75 mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M & L Anodised aluminium Powder Coated (minimum thickness of powder coating 50 micron)frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified and directed.

M & L 12 mm thick toughened one way sheet glass exceeding 0.50 sqm in each pane in required sizes ,secured in aluminium frame with rubber gasket, joined / sealed with silicon complete all as specified and directed.

M & L 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M & L for providing and fixing stainless steel (Grade 304) railing,truss and the like similar works made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F Stainless steel hinges 100 mm size complete all as specified and directed.

S & F 150 mm size Extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed.

S & F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M & L wooden vanity Wash hand basin with fancy swan neck pillar tap complete all as specified and directed.

M & L Wall mounted Water closet with flushing cistern complete all as specified and directed.

S & F 15mm dia CP fancy Bib taps, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F 15mm dia CP fancy stop valves, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F CP Jet spray, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F Vitreous China urinals,half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S & F PVC connections 15mm size with PTMTnuts of length 300mm complete all as specified and directed.

S & F Acrylic towel rail of length 600mm with brass screws complete all as specified and directed.

S & F Acrylic towel ring with brass screws complete all as specified and directed.

S & F Acrylic twin soap dish with brass screws complete all as specified and directed.

S & F Acrylic soap dispenser with brass screws complete all as specified and directed.

S & F Glass corner stand set of three complete all as specified and directed.

S & F stainless steel peg set of three complete all as specified and directed.

S & F stainless steel toilet paper holder complete all as specified and directed.

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.

S & F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F PVC (SWR) bends 75 mm bore any radius complete all as specified and directed.

S & F PVC (SWR) bends 75 mm bore any radius with access door complete all as specified and directed.

S & F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F PVC (SWR) bends 110 mm bore any radius complete all as specified and directed.

S & F PVC (SWR) bends 110 mm bore any radius with access door complete all as specified and directed.

S & F PVC (SWR) vent cowl 110 mm bore any radius complete all as specified and directed.

S & F PVC (SWR) double Y 110 mm bore any radius with access door complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanksof capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s complete all as specified and directed.

S & F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

M&L for Point wiring complete with 1.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit/ PVC Casing Capping but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules complete all as specified and directed.

One light point or one fan point controlled by one switch with cables 1.5 sq mm size complete all as specified and directed.

One 5 A socket outlet, independent, with cables 1.5 sq mm size complete all as specified and directed.

S & F modular type 6 A one-way SP switch complete all as specified and directed. Make :- Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F modular type 2/3 pin combined 6 A socket complete all as specified and directed. Make :- Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

M & L for ceiling rose, 3-Ph/ PVC / polycarbonate, isolated body complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

M&L for Point wiring complete with 2.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit /surface casing caping but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 2.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules complete all as specified and directed. (a) One 15 A socket outlet, independent, with cables 2.5 sq mm size complete all as specified and directed.

S & F modular type 16 A one-way SP switch complete all as specified and directed. Make :- Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply and fix in repair surface mounted slim round downlighter fitting 10 Watt , with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire complete all as specified and directed. Make : Wipro (IRIS)/ Philips/HPL (Jonex Plus)

S&F 40 W Pole Mounted LED post top lamp, operating Voltage 140-270, including electrical connection with 3 core flexibvle Cu conductor cable including SS 316 Grade Pole of 2.0 M length 12 SWG including SS plate nut and washer complete all as specified and directed. Make: Philips (BGP+E25 LED40757 PSU PC IN S1)/ Osram /Wipro

M & L submain wiring with two runs of 2.5 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit and one run of 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable as earth conductor in concealed/surface casing caping but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling complete all as specified and directed.

Supply and Fix Thermoplastic CB Box 01 row , 9 Module of size 202 x 238 x 111 -with Terminals and lugs for cable of any size with necessaries fittings confirming to IP 65 Protection with metric knock out for cable entry all as specified and as directed by Engineer-In-charge. Make :- Hensel/ Neptune/ Rittal/ Hager

S&F MCB SPN 16/32 A 10 KA, 240 V in CB Box complete all as specified and directed. Make: Legrand/ Schneider/Hager

S&F MCB SP 06/32 A 10 KA, 240 V in CB Box complete all as specified and directed. Make: Legrand/ Schneider/Hager

Supply and Fix Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed. Make: Almonard/Havells/khaitan

vijay infraprojects pvt ltd

Sukhi Electricals

Shivaang Enterprise

ARPIT TECHNO INFRA PVT LTD

Harsh Infrastructure

Nitesh Enterprise

M/S. P.M GODHANIYA

shree chamunda enterprise

JAMNAGAR ELECTRIC AND MACHINERY CO