Kerala

AOC

Works

Civil Works - Roads

Bedadka GP Proj no 235 2025 26 Maintenance to community hall

Local Self Government Department

Bedadukka GP | Kasaragod, Kerala

Amount: ₹3.4 LCloses: 30 Sept 2025Closed

Timeline

Published22 Sept 2025
Closed30 Sept 2025
Technical Evaluation6 Oct 2025
Financial Evaluation7 Oct 2025
Awarded1 Nov 2025

Bids

Item Rate

2 Bids1 Nov 2025

#	Company	Amount	Rank	Status
1	VIJAYAKUMAR M L1₹2.9 LAccepted-AOC VIJAY BHAVAN PUNNAVILAKAM VETTU ROAD PALLIPPURAM KANIYAPURAM P O TRIVANDRUM 695301 \| TRIVANDRUM \| THIRUVANANTHAPURAM \| KERALA \| 695301	₹2.9 L	L1	Accepted-AOC L1
2	Abhinesh Anandan L2₹3.0 L+₹11,401.98 (3.89%)Rejected-Finance	₹3.0 L+₹11,401.98 (3.89%)	L2	Rejected-Finance L2

BoQ Comparative

Line Items (24)

Sl No	Description	Qty	Unit	Abhinesh Anandan L2	VIJAYAKUMAR M L1
1.00Poliyamkunnu community hall
1.00	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	568.8	kg	164.15 ₹93,368.52	149.21 ₹84,870.65 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	107.18	kg	158.04 ₹16,939.36	140.8 ₹15,091.51 Lowest
1.00	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	120.4	sqm	711.59 ₹85,675.44	690.8 ₹83,172.32 Lowest
1.00	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	22	metre	477.44 ₹10,503.68	451.44 ₹9,931.68 Lowest
1.00	OD246154/2025-2026:Providing and fixing 150 mm half cut PVC pipe over flat iron brackets 20x5 mm size	43	metre	221.11 ₹9,507.73	220 ₹9,460 Lowest
1.01	50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall	14	metre	265.89 ₹3,722.46 Lowest	309.76 ₹4,336.64
1.01	50.14.1.2:Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge	24	each	280.98 ₹6,743.52	259.6 ₹6,230.4 Lowest
1.01	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	1.6	sqm	1,080.55 ₹1,728.88 Lowest	1,100 ₹1,760
1.01	13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .	11.23	sqm	202.8 ₹2,278.46	189.2 ₹2,125.66 Lowest

Tender Value

₹3.4 L

EMD Value

₹8,474

Closing Date

30 Sept 2025, 5:00 pmClosed

Tender Inviting Organisation

Name

AE LID AND EW BEDADUKA GP

Address

AE LID AND EW BEDADUKA GP

Work Description

Bedadka GP Proj no 235 2025 26 Maintenance to community hall

Tender Information

Tender ID

2025_LSGD_800107_7

Reference Number

05 AE LID AND EW BDKA PHASE V

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Item Rate

Location

Bedadukka GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

please refer Tender Documents

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredSCANNED COPY OF PRELIMINARY AGREEMENT (.pdf)

RequiredSCANNED COPY OF E - PAYMENT FORM (.pdf)

RequiredSCANNED COPY OF INTEGRITY PACT CERTIFICATE (.pdf)

RequiredSCANNED COPY OF AFFIDAVIT (.pdf)

RequiredSCANNED COPY OF FORM OF TENDER (.pdf)

RequiredNOTICE INVITING TENDER (.pdf)

RequiredSTANDARD BID DOCUMENT (.pdf)

Fee & Financial Details

Tender Fee Amount

₹750

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹8,474

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

1 Nov 2025

Published

22 Sept 2025

Bid Opening

3 Oct 2025

Download Starts

22 Sept 2025

Download Ends

30 Sept 2025

Submission Starts

22 Sept 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

VIJAYAKUMAR M

L1₹2.9 LAccepted-AOC

VIJAY BHAVAN PUNNAVILAKAM VETTU ROAD PALLIPPURAM KANIYAPURAM P O TRIVANDRUM 695301 | TRIVANDRUM | THIRUVANANTHAPURAM | KERALA | 695301

Abhinesh Anandan

L2₹3.0 L+₹11,401.98 (3.89%)Rejected-Finance

Sl No	Description	Qty	Unit	Abhinesh Anandan L2	VIJAYAKUMAR M L1
1.00Poliyamkunnu community hall
1.00	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	568.8	kg	164.15 ₹93,368.52	149.21 ₹84,870.65 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	107.18	kg	158.04 ₹16,939.36	140.8 ₹15,091.51 Lowest
1.00	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	120.4	sqm	711.59 ₹85,675.44	690.8 ₹83,172.32 Lowest
1.00	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	22	metre	477.44 ₹10,503.68	451.44 ₹9,931.68 Lowest
1.00	OD246154/2025-2026:Providing and fixing 150 mm half cut PVC pipe over flat iron brackets 20x5 mm size	43	metre	221.11 ₹9,507.73	220 ₹9,460 Lowest
1.01	50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall	14	metre	265.89 ₹3,722.46 Lowest	309.76 ₹4,336.64
1.01	50.14.1.2:Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge	24	each	280.98 ₹6,743.52	259.6 ₹6,230.4 Lowest
1.01	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	1.6	sqm	1,080.55 ₹1,728.88 Lowest	1,100 ₹1,760
1.01	13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .	11.23	sqm	202.8 ₹2,278.46	189.2 ₹2,125.66 Lowest

Sl No

Description

Qty

Unit

Abhinesh Anandan

VIJAYAKUMAR M

1.00Poliyamkunnu community hall

1.00

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

568.8

164.15

₹93,368.52

149.21

₹84,870.65

Lowest

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

107.18

158.04

₹16,939.36

140.8

₹15,091.51

Lowest

1.00

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

120.4

sqm

711.59

₹85,675.44

690.8

₹83,172.32

Lowest

1.00

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

metre

477.44

₹10,503.68

451.44

₹9,931.68

Lowest

1.00

OD246154/2025-2026:Providing and fixing 150 mm half cut PVC pipe over flat iron brackets 20x5 mm size

metre

221.11

₹9,507.73

220

₹9,460

Lowest

1.01

50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

metre

265.89

₹3,722.46

Lowest

309.76

₹4,336.64

1.01

50.14.1.2:Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge

each

280.98

₹6,743.52

259.6

₹6,230.4

Lowest

1.01

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

1.6

sqm

1,080.55

₹1,728.88

Lowest

1,100

₹1,760

1.01

13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

11.23

sqm

202.8

₹2,278.46

189.2

₹2,125.66

Lowest