Material supply

Amount

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Stone Aggregate(single size): 6 mm nominal size

Coarse sand (zone III)

Portland Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Stone for masonry work

Twisted steel/deformed bars

Solid blocks of size 30x20x15cm

Fine sand (zone IV)

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Acrylic exterior paint

Exterior primer

Flats up to 10 mm in thickness

Welding by electric plant

Red oxide Zinc chromate primer

Structural steel such as tees, angles, channels and R.S. joists

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Aracanut post

Bamboo/kallanmula

G.I pipes 50 mm dia

G.I. pipes 40 mm dia

GI trafford profile sheet 0.35mm thick

Stainless steel screws 50 mm

PVC bend 63 mm dia

PVC Tee 63x63x63 mm dia

PVC end cap 63 mm dia

PVC Elbow 63 mm dia

PVC pipe 63 mm outer dia. 4 kgf/cm2

PVC Reducer 63x50 mm dia

PVC vent cowl 63 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

wall form panel 1250x500 mm

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Solid blocks of size 30x20x20cm

Galvanised steel corrugated sheets

Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

Galvanised steel J or L hooks 8 mm dia

G.I Limpet washer

Bitumen washer

Roofing paint for iron sheets in red colour

Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm

Wire nails

Mild steel plates

Mild steel rivets

20 mm dia holding down bolts

Quarry Waste

Corner angle 45x45x5 mm 1.50 m long

Bamboo 25 mm dia 2.5 meter long

Separation Membrane of impermeable plastic sheeting 125 micron thick

Boulder 50mm to 200mm

Crates made of MEsh type 10x12 (D=100mm) Zinc coated (Mash wire diameter 3.00 mm)

Green Net 75% shade

Polyurethene bags

Royalty for good earth

Interlocking C.C. paver block (80 mm thick, M-30)

Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement

Mild steel tubes hot finished welded type

200 mm Aluminium aldrop

Second class kail wood in planks

Second class kail wood in scantling

Safeda ballies 125 mm diameter

Flats up to 10 mm in thickness

Mild steel round bar 12 mm dia and below

PVC pipe 15 mm outer dia. 12kgf/cm2

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Vitreous China orrisa type w.c. pan size 580 mm

Vitrified floor tile 60x60 cm

Hollock ballies 125 mm diameter

Adjustable span ESO+SI (2.35-3.40)

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Chromium plated Brass screws 25 mm

Iron hooks & eyes 100 mm

Anodised Aluminium tower bolt (barrel type)300x10 mm

Chromium plated Brass screws 30 mm

M M MOHAMMEDALI