RENOVATION WORK OF ANGANVADI IN DIFFERENT 7 LOCATION IN DEESA NAGARPALIKA AREA, DEESA. UNDER ICDS GRANT

NAME OF WORK : Renovation Work of Anganvadi in Different Location in Deesa Nagarpalika Area, Deesa.

Under ICDS Grant

1. Repairng work of Anganvadi ICDS-1 at Bhoivaas Area For Deesa Nagarpalika

2. Repairng work of Anganvadi ICDS-2 at Bhopanagar-2 Area For Deesa Nagarpalika

3. Repairng work of Anganvadi ICDS-3 at Bhopanagar-Malivaas Area For Deesa Nagarpalika

4. Repairng work of Anganvadi ICDS-1 at Dhobivaas Area For Deesa Nagarpalika

5. Repairng work of Anganvadi ICDS-1 at Dolivaas Area For Deesa Nagarpalika

6. Repairng work of Anganvadi at Kachhi colony -1 Area For Deesa Nagarpalika

7. Repairng work of Anganvadi ICDS-2 at Terminala Area For Deesa Nagarpalika

Description Quantity Rate Per Amount

Demolition of Brick work and stone masonry including stacking

1 of serviceable materilas and disposal of unserviceable materials 7.93 562.89 Cumt

with all lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking

2 of serviceable materilas and disposal of unserviceable materials 211.00 49.12 sqmt

with all lead and lift.

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

Demolition of terrace including stacking of serviceable materilas

4 and disposal of unserviceable materials with all lead and lift.(i) 225.00 65.32 sqmt

Brick tile covering.

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft

Providing and laying cement concrete 1:4:8 (1- Cement : 4-

Coarse sand : 8- crushed stone aggregates 40 mm nominal size)

and curing complete including cost of formwork in (A)

Foundation and Plinth

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

(i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

9 plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) 11.60 4526.81 Cumt

Conventional in superstructure above plinth level

upto floor two level (B) Conventional

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (ii) Cement mortar 1:4 (1-cement :4-sand)

Providing 20mm thick cement plaster in single coat on single

or half brick walls for interior plastering upto floor two level

and finished even and smooth in (ii) Cement mortar 1:4 (1-

cement :4-sand)

Description Quantity Rate Per Amount

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick

in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-Cement : 3 coarse sand) and

jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing

Provide and fixing Marble Slab Polished granite stone 20 to

25mm thick black (Item-M394,Pg.23)

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand)

15 or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed 11.84 2233.18 sqmt

with gray cement slurry including rubbing and polishing

complete. (A) Marble slab 25mm thick

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit (upto 10 ton)

Providing and laying broken chine mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

17 bring mortar creme out upto surface using white cement 251.99 779.70 sqmt

including rounding off junctions and extending them upto 15 cm

along the wall,clearing with

water and oxalic acid etc. as directed.

Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall surface to give an even

18 shade including thoroughly brushing the surface free from mortar 169.95 40.59 sqmt

dropping and other foreign matter and sand

papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains

of loose powdered materials.etc complete

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall

20 surface to give an even shade including throughly brushing 175.35 83.18 sqmt

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Providing and fixing in position Aluminum Mesh Shutter /

Mosquito Jali Shutter made from extruded aluminum

sections.frame size should be 40 mm *20 mm

*1.50mm(thick.)and the mesh should be stainless steel(SS

grade)The scope of work includes fabrication, supply, hoisting,

and fixing the mesh shutters to the existing window frames or as

independent sliding/openable units, complete with all necessary

hardware and fittings

Description Quantity Rate Per Amount

RCC precast M.H. Frame & Cover Manufacture, supply &

Delivery at store or at site of work precast RCC M.200 Frame &

22 cover suitable to drainage M.H. and as per type design & 4.00 2294.00 Nos.

Drawing including cost of reinforcement M.S. Angles or Flate,

curring mold work etc.

23 Providing and executing half- round edge moulding for Granite 40.80 85.85 rmt

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts

and nuts or by screws (A) Plain Grill.

Supplying and fixing corrugated fiber-reinforced plastic (FRP) /

polycarbonate sheets of specified thickness over a prepared

framework (steel ). The installation includes aligning the sheets

against prevailing winds, maintaining a minimum pitch angle of

10 degrees, ensuring a safe overlap of at least 150mm on ends

and one full corrugation on sides, and securing the sheets using

EPDM-washered roofing screws or J-bolts driven through pre-

drilled oversized holes

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

26 an even shade including cleaning the surface an even shade 40.50 91.71 sqmt

including cleanicn the surface of all dirt, dust and other foreign

Providing and laying Ceramic tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in

Providing and fixing water closet squatting Pan (Indian type

W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and

trap to be measured and paid for separately) (A) Vitreous

China.(I) Long pattern = White colour

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm

& earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino

Type ISI marked flush type switch / bell push and accessories

erected on Metal / PVC/Wooden Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Providing and fixing in position Aluminum Mesh Shutter /

Mosquito Jali Shutter made from extruded aluminum

sections.frame size should be 40 mm *20 mm

*1.50mm(thick.)and the mesh should be stainless steel(SS

grade)The scope of work includes fabrication, supply, hoisting,

and fixing the mesh shutters to the existing window frames or as

independent sliding/openable units, complete with all necessary

hardware and fittings

Description Quantity Rate Per Amount

Providing and fixing FRP frame size 125x65 mm and 35mm

thick FRP shutter with wood grain raised panneled design finish

shutter having extra reinforcement on sides & edges in Gel coat

finish. The core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fintures. The

whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with fastener sleeve & alluminium

fixtures & fastenings.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside Dia.

32 Low densidy, complete with special falnge compression type 38.00 339.05 rmt

fittings, wall clipsetc. including making good the wall ceiling and

floor. (G)110 mm

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure polythene pipes of the following

33 outside Dia. Low densidy, complete with special falnge 15.00 280.23 rmt

compression type fittings, wall clipsetc. including making

good the wall ceiling and floor.(F) 75mm

Construction Brick Masnoary chamber (Inner dimension 600 mm

x 450 mm) as per requirment including fitting of heavy duty

frame & cover at proposed level including all material and labour

charges as per instruction given by in charge enginneer.

Providing and fixing screw down bib taps of following size.(B)

35 Brass chromium plated screws down Bib Tap. (i) 15mm dia.(Itm 1.00 186.83 Nos.

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation

36 (NSF) seal for potable water of following dia. nominal bore tube 10.00 170.36 rmt

fittings and clamps including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.

RCC precast M.H. Frame & Cover Manufacture, supply &

Delivery at store or at site of work precast RCC M.200 Frame &

37 cover suitable to drainage M.H. and as per type design & 3.00 2294.00 Nos.

Drawing including cost of reinforcement M.S. Angles or Flate,

curring mold work etc.

Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint,

brushing to give an even shade including cleaning the surface

of all dirt, dust and other foreign matter.

Providing and fixing Kitchen sink with C.I. or M.S. brackets,

painted white including cutting holes in walls and making

good the same but excluding fittings. (C) Vitreous China

Sink.(i) 600mm x 450mm x 150mm size

Providing and fixing washbasin with single hole for pillar

tap with C.I. or M.S. brackets painted white including

40 sutting holes and making good the same but excluding 1.00 1526.65 Each

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm

x v 400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink.

Providing and fixing M.I. fisher union for washbasin or sink.

Providing and fixing 100mm sand cast iron grating for

gully, floor or Nahni trap.

Description Quantity Rate Per Amount

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

44 screaed down or higned grating including cost of cutting 2.00 646.41 Each

and making good the walls and floor 100mm inlet and

50mm outlet.(C) 100mm dia.

Providing and fixing screw down bib taps of following

45 size.(A) Brass screw down bib tap polished bright. (i) 15mm 2.00 186.83 Each

Provide plastic moulded chair with arms without cushine single

Total Amount Rs.

Total Amount Rs.