Supply of all material Laying and Jointing of Pipe Line House Hold connection and its appurtenance Works at Shivpuri mustehkam Block Laksar Water Supply Scheme Retrofitting on item rate contact basis including supply of all materials labor

Amount

Supply of HDPE pipe including laying jointing Field testing,commissioning complete at site of HDPE PN-6 (pe100 grade compound)pipe as per IS 4984 and specifications for water application including all cost of material, labour required,transpotation,loading,unloading& stacking etc.

Supplying carting , laying , jointing of full length 80 mm G.I Class-C pipes, including jointing etc.

Supply, carting and fixing in position of following CI D/F sluice / Gate valve for flow regulation & scouring including cost of valve specials, labour & T&Pcomplete. Pressure PN 1.0

Air valve 20 mm dia

Excavation of pipe line in soil mixed with course sand, shingle, kankar, including refilling of trenches after laying of pipe line including watering ramming etc.

Dismantling of following type of road surfaces for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials.

Cement concrete road

Reinstatement of following type of road surfaces after laying of pipe line including supply of all material ,labour,T&P etc complete.

Cement concrete road

Construction of following chambers

Sluice valve/ wheel valve chamber(1.00X1.00 m)

Air valve chamber (1.00x100.00 m)

Supply and fixing of Water connection including all material like ferrule G.I. Pipe, Bends etc. complete with labour.

Building Work : Pump House

Excavation in foundation in ordinary soil (loam clay and sand) including lift upto 1.5 m and lead upto to 50 m refilling, watering and remaining of excavated earth into trenches or into the space between the building and sides of foundation trench.

Concrete with 4 cm gauge stone ballast, local sand and cement in proportion of 6:3:1 in foundation, including supply of all materials, labour, T&P etc. required for proper completion of the work.

Mild steel or iron work in RCC work wrought to required shape as necessary including bending for proper completion of work including supply of steel and wastage etc.

RCC with cement, coarse sand and 20 mm gauge approved stone ballast in proportion of 1:1.5:3 in slabs excluding supply of reinforcement and its bending but including its fixing and binding the same with 0.50 mm thick binding wire in position and nece

Ist class 75 designation brick work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion the work.

FPS class 75 designation brick work in 1:6 cement and local sand mortar in superstructure including supply of all materials, labour, T&P etc. required for proper completion the work.

Centering and shuttering including strutting, roping and removal of forms of roof

12 mm thick plaster with cement & local sand mortar in 1:6 over brick work minimum thickness not to be less than 10 mm including supply of all materials, labour, T&P etc. required for proper completion the work.

Same as above item no. 8 but in proportion 1:3 with cement and local sand mortar over ceiling.

Same as above item No. 8 but in proportion 1:4 with cement and local sand mortar.

40 mm thick 1:2:4 P.C.C. floor with cement and coarse sand & 2 cm gauge approved stone ballast laid in panels finished with 3 mm floating coat of neat cement and 7.5 cm thick base concrete consisting of cement and local sand and 1st class brick bal

Supply and fixing oxidized iron fittings of approved make in door and window shutters.

Painting or varnishing of new iron or wood work with one coat of priming and two coasts of approved paint and varnish including supply of all materials, labour, T&P etc. required for proper completion of the work.

Supply and fixing of girder of 200 mm × 100 mm size 15 mm thick, over the pump house including its painting with approved paint and also one coat of primer.

Grading roof for water proofing treatment with cement mortar 1:3 (1cement : 3coarse sand )

Earth filling in water works compound

White washing 3 coats including supply of all meterials labour T & P etc. required for proper completion of work.

Finishing wall with Acrylic smooth exterior paint with silicon additive of requared shade. New work ( two or more coat applied @ 1.43 lit/10Sqm over and including primer applied.(DSR Code 13.47.1)

Concrete with 4 cm gauge stone ballast, local sand and cement in proportion of 1:2:4 in foundation, including supply of all materials, labour, T&P etc. required for proper completion of the work.

40mm thick damp proof course with cement and approved coarse sand & 12.5mm stone grit 1:2:4 including 5% water proofing materials.

Providing and fixing T iron frames for door, windows, and ventilators of MS tee section, joints mitered and welded with 15x3mm lugs 10cm long embeded in cement concreate block 15x10x10cm in 1:3:6 and applying primer coat of approved steel primer.

Providing and fixing MS grill of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete.

Raised and cut pointing with cement and coarse sand mortar in 1:3 on brick work including supply of all materials labour, T&P etc. required for proper completion the work.

Providing & fixing of 4mm thick and 40mm wide glass strips in flooring

Providing & fixing 3.5 cm thick flush door shutters conforming IS: 2202 including supply and fixing and adjustment of hinges, bolts, handles and springs and other fittings.

Supply & fixing 4mm thick plain glass in windows including supply of nails and putty etc. required for proper completion of the work.

Supply of all materials, labour, T&P etc. required for the construction of 150mm dia. Size C.C. drain.

G.I Barbed wire fencing 0.6 meter high providing and fixing 0.6 meters high GI barbed wire fencing on 1.0m angle iron post.

Supply & fixing of 1.0m angle iron post of size 60x60x6

BOQ of Mechanical & Electrical Work

Transportation of Rig Machine, Air compressor O.P unit camp equipages, connected T&P & necessary material required for drilling up to site of work, including loading, unloading etc. complete.

Erection and Leveling of Rig Machine and barricading at site of work

Dismantling of Rig Machine & Clearance of site after satisfactory completion of work.

Drilling of borehole from GL to 150 mtr. BGL of minimum pilot bore size 600 mm afer reaming including all necessary arrangement for drilling complete with collecting of samples from different strata and preparing/submitting strata chart .

Supply & fixing of 200 mm dia MS ERW fincut 7.9 mm thick Plain pipe

Supply & fixing of 200 mm dia MS ERW fincut 7.9 mm thick Slotted pipe

Supply & fixing of 200 mm dia, 8 mm thick tubewell cap.

Supply & fixing of 200 mm dia M.S.D.I housing clamp and complete two nos.200mm size M.S channel.

Supply & fixing of 300 mm dia Bail plug.

Supply & Shrouding of Pea gravel in between bore &tubewell assembly to the entire depth of tubewell.

Development of tubewell by 250 PSI/1100 CFM Air compressor.

Development of tubewell by the suitable capacity O.P unit including supply & installation of pumping plant.

Geohydrological survey of site.

Chemical & bacteriological testing of water sample

Supply of Submersible pump-set of 10 B.H.P Output N.R.V size 100mm.

Cable ISI Mark 10 sqmm Flat Submersible.

Cable ISI Mark 10 sqmm Flat Electrical.

Lowering Charges

GI Pipe for lowering 100 mm

Preparation of lowering, Cutting of pipe in 3 m lenth & thraeading

Flanges

Supply & Fixing chlorinator including labour T&P etc Complete.

Pumping with supply & Fixing Complete.

SADAN CONSTRUCTION AND SUPPLIERS

M/s Sunrise Construction Co., Prop. Mohinyuddin Ansari