T-65/EDCP/2023-24

Amount

Safe carriage of following material from store centre-Pilibhit to different sites including loading unloading at both end under EDD-Bisalpur distance up to 0-60 Km.

PCC Pole 8.5 Mtr.

AB Cable 3x120+1x95+1x16

AB Cable 3x95+1x70+1x16

AB Cable 3x50+1x35+1x16

Earthing complete for PCC pole

Earthing complete for distribution T/Fs

LT Distribution Box with clamp 3 Phase

Stay set complete

Erection of single PCC pole including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing. All types of clamps, stone pad, I hook, nut, bolt washers would be provided by the contractor.

Concreting of PCC pole at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. brick, ballast, sand etc would be provided by the contractor.

Earthing of pole, (earthing rod provided by department and other required nut and bolts etc. provided by firm by at his on cost.

Earthing of distribution T/Fs (earthing rod provided by department and other required nut and bolts etc. provided by firm by at his on cost.

Opening, descend of damage LT AB cable from old pole, other materials and carriage of received back from site to store centre-Pilibhit

Laying of LT AB Cable of size 3x120+1x95+1x16 complete work in all respect.

Laying of LT AB Cable of size 3x95+1x70+1x16 complete work in all respect.

Laying of LT AB Cable of size 3x50+1x35+1x16 complete work in all respect.

Fixing of LT distribution box 3 Phase complete work in all respect.

Providing and fixing I hook with suspension clamp

Providing and fixing I hook with clamp

Providing and fixing dead end clamp

Providing and fixing of piercing connector

Earthing of T/Fs (250 KVA to 630 KVA) by boaring type up to water level by providing GI pipe and making connection from boaring site to body and neutral of T/F. (All Material will be provided by Contractor own his cost).

Fabrication and Installation of 11 KV fuse set on midway 11 KV double pole structure with mention material As- MS channel 100x50x2028 mm, Iron strip-50x5x305 mm, fuse wire and holding clamps etc. complete work in all respect all required materials provided by contractor on his own cost for 11 KV distribution transformers.(25 KVA to 630 KVA)

Cutting and chopping of tree branches (big and small sizes tree branches in the way of 33/11 KV HT line.

M/S HINA ELECTRICALS

DURGESH CHANDEL