Construction of 50 Beded Hospital at Ghawandal Sh. Naina Devi Ji Distt. Bilaspur (HP) (SH- C/o Building Portion, water supply and Sanitary Installation, Rain water Harvesting Tank, Septic Tank and site development i/c R/wall and Counterfort wall.

Amount

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m (One point five metre) in width or 10 sqm (Ten square metre) on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five metre), including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in oridinary rock and all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm (Thirty centimetre)in depth, 1.5 m (One point five metre), in width as well as 10 sqm(ten square metre) on plan) including getting out and disposal of excavated earth lead upto 50 m(fifty metre) and lift upto 1.5 m,(One point five metre) as directed within all leads and lifts in oridinary rock and all kinds of soil including entire carriage of materials in all leads and lifts in and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km(five Kilometre) also including ramming and watering of the earth in layers not exceeding 20 cm(twenty centimetre) in trenches, plinth, sides of foundation etcetera. complete.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m ( one point five metre) in width or 10sqm (ten square metre) on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, (one point five metre) including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m (fifty metre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, ( one point five metre) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera. and disposing of surplus excavated soil as directed, within a lead of 50 m all kinds of soil Pipes, cables etcetera. exceeding 80 mm (eighty millimetre) dia. but not exceeding 300 mm (three hundred millimetre) dia including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundations, footings, bases of columns etcetera for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Columns, piers, abutments, pillars, posts and struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etcetera.

Edges of slab and breaks in floors and walls under 20cm wide

Stairs, (excluding landings) except spiral staircases

Centering and shuttering including strutting, propping etcetera . and removal of form work for ,Retaining walls, return walls, walls (any thickness) including attached pilasters,buttresses, plinth and string courses fillets,kerbs and steps etcetera including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level all work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate.in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera ., up to all floor level, excluding the cost of centering, shuttering and finishing including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level all work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:3:6 (one cement : three coarse sand : six graded stone aggregate) 20mm ( twenty millimetre) nominal size graded stone aggregate upto plinth level all work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying damp-proof course 40mm ( forty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 12.5mm ( twelve point five milimetre nominal size including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg ( one point seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying design mix reinforced cement concrete of M-30(M-Thirty) grade, stone aggregate 20 mm (twenty millimetre) nominal size) to obtained the minimum crushing strengh of 30 N/mm2./*Thirty Newton) per milimetre Square)with minimum cement content, not less than 430 kg. /cubic metre (Four hundred thirty kilogramme per cubic metre ) as per approved design mix ,including pumping of concrete to side of laying in Foundation & footings bases of columns and the like and mass concrete excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying design mix reinforced cement concrete of M-30(M-Thirty) grade, stone aggregate 20 mm (twenty millimetre) nominal size)to obtained the minimum crushing strengh of 30 N/mm2./Thirty Newton) per milimetre Square)with minimum cement content , not less than 430 kg. /cubic metre (Four hundred thirty kilogramme per cubic metre ) as per approved design mix, including pumping of concrete to side of laying in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement with graded stone aggregate 20 mm (twenty millimetre) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying design mix reinforced cement concrete of M-30(M-Thirty) grade, stone aggregate 20 mm (twenty millimetre) nominal size to obtained the minimum crushing strengh of 30 N/mm2./Thirty Newton per milimetre Square)with minimum cement content , not less than 430 kg. /cubic metre (Four hundred thirty kilogramme ) per cubic metre ) as per approved design mix including pumping of concrete to side of laying ini walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera . above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing, hoisting and fixing in position precast reinforced cement concrete of specified grade of M-25 (M-Twenty five)design mix graded stone aggregate 20 mm (twenty millimetre) nominal size in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (one cement : two coarse sand),above plinth level up to all floor level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, hoisting and fixing in position precast reionforced cement concrete of specified grade of M-25(M-Twenty five ) design mix graded stone aggregate 20 mm (twenty millimetre) nominal size in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like,above plinth level up to all floor level, including the cost of required centering, shuttering but , excluding cost of reinforcement,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing in position precast cement concrete specified grade of M-20(M-Twetnty )design mix graded stone aggregate 20 mm (twenty millimetre) nominal size Jali with 1.6 mm(one point six millimetre) dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (one cement: three fine sand) etcetera . complete, excluding plastering of the jambs, sills and soffits 50mm(fifty millimetre) thick above plinth level up to all floor level, including the cost of required centering, shuttering but , excluding plastering of the jambs, sills and soffits including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying design mix reinforced cement concrete of M-25(M-Twenty five milimetre) grade, stone aggregate 20 mm (twenty millimetre) nominal size) to obtained the minimum crushing strengh of 25 N/mm2./(Twenty five Newton per milimetre Square)with minimum cement content, not less than 400 kg. /cubic metre (Four hundred kilogramme ) per cubic metre ) as per approved design mix including pumping of concrete to side of laying in all work Foundation & footings bases of columns and the like and mass concrete excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of M-25 design mix graded stone aggregate 20 mm (twenty millimetre) nominal size to obtained the minimum crushing strengh of 25 N/mm2./Twenty five Newton per milimetre Square)with minimum cement content, not less than 400 kg. /cubic metre (Four hundred kilogramme ) per cubic metre ) as per approved design mix including pumping of concrete to side of laying in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera. above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying design mix reinforced cement concrete of M-25 grade, stone aggregate 20 mm (twenty millimetre) nominal size) in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement with graded stone aggregate 20 mm (twenty millimetre) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying in position ccement concrete of M-20 grade, stone aggregate 20 mm (twenty millimetre) nominal size) grade excluding the cost of centering and shuttering upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel reinforcement (TATA /SAIL / JINDAL PANTHER of (JSPL)Tisco,RINLshyam steel make for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete work including cost of binding wire upto all floor level TMT of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Smooth finishing of the exposed surface of R.C.C. work with 6 mm(six millimetre) thick cement mortar 1:3 (one Cement : three fine sand).including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Brick work with common burnt clay . ( modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Brick work with Rat trap bond with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:4 (one cement : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one sand : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundations and plinth in : in cement mortar 1:4 (One cement : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Supplying and stacking of hard stone (for stone pitching) 22.5cm(twenty two point five centimetre) thick at site.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing cup board shutters 25 mm ( twenty five millimetre) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked,of Action tesa,,Green ply,Kit ply National ,Novapan, Archidply make exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm ( twenty five millimetre) wide x12 mm ( twelve millimetre) thick with necessary screws and bright finished stainless steel piano hinges, complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 18mm (Eighteen millimetre)Pre-laminated flat pressed three layer (medium density) particle board or graded wood particle board IS : 3087 marked, Action tesa,Green ply,Kit ply National ,Novapan ,Archidply make with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked,of Action tesa,Green ply,Kit ply make in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 6 mm ( six millimetre) thick commercial ply (Green ply,Kit ply/ Century ply make) one side decorative veneer conforming to IS: 1328 BWR (type-1), for plain lining with necessary screw/ nuts, and bolts/nails including priming coat of approved primer on one face and fixed on wooden steel work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 1.00mm ( one millimetre) thick high pressure laminated sheet of plain / wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesiive bonding quality conforming to IS:2046 Types,including cost of adhesive of approved quality etcetera lamination sheet (sunmica ) of Greenlam/ century ply / kit ply make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm(eighteen into five millimetre) fixed with wooden adhesive of Action tesa,Green ply Kitply National ,Novapan , Archidply make approved quality and screws/nails on the edges of the Pre-laminated particle board complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing supplying and Fixing factory made uPVC door frame size 108x53mm, (one hundred eight into fifty three millimetre)made out of multichamfered UPVC section with TPV gaskets having isolated drainage and reionforcement with galvanised iron profiles throughout the door frame.The outer frame with reinforced of 2mm (two millimetre)thickness,sash with overall size 102x60mm(one hundred two into sixty millimetre) with reionforcement of 1.5mm (one point five millimetre) thickness glazing bead for fixing of glass shall be of size 34x20mm(thirty four into twenty millimetre) and coextruded with gasket.The composition of proffile shall consist a minimum of 6PHR of Tio2 and not more than 12PHR ,of CaCo for every 100 (hundred)parts of PVC resin.The UPVC profiles used for fabrication of windows and doors frames shall contains minimum of 6PHR of TIO2 .The profiles shall be approved shade in colour matched the RAL code 9016 profiles used for fabrication of windows and doors shall meet the stanards of BSEN:12608-2008 of wintech/fenesta/kommerling by SKYVUE fenestration or equivalent make should full fill the normative EN:477 ,EN:478, EN:479, EN :513, EN:514, EN:ISO 105-A01:1995, EN:ISO178 ,EN: ISO179-2 ,EN:ISO 306, EN:ISO 527 ,EN : IASTM :792 ISO 7724-3 . The profiles should be hollow,three chamfered structure coextruded with grey colour TPV (thermo plastic valcanizates)gasket to provide high insulation properties.The profile of all frame sections shall be reionforced with minimum 2mm thick steel sections. The profiles of frame and sash shall be mitre cut and fusion welded at all corner i/c drilling of holes for fixing of hardware and anchor fastners.The G I reionforcement of 120GSM as per IS 875standard shall be inserted throught out the frame,sah ,mullions including providing & fixing 3 (three )nos of 125 mm (one hundred twenty five millimetre) long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing supplying and Fixing factory made uPVC door frame size 102x60mm,(one hundred two into sixty millimetre) made out of multichamfered UPVC section with TPV gaskets having isolated drainage and reionforcement with galvanised iron profiles throughout the door frame.The outer frame with reinforced of 2mm( two millimetre) thickness,sash with overall size 102x60mm(one hundred two into sixty millimetre) with reionforcement of 1.5mm (one point five millimetre)thickness glaging bead for fixing of glass shall be of size 34x20mm(thirty four into twenty millimetre) and coextruded with gasket.The composition of proffile shall consist a minimum of 6PHR of Tio2 and not more than 12PHRof CaCo for every 100 (hundred) parts of PVC resin.The UPVC profiles used for fabrication of windows and doors frames shall contains minimum of 6PHR of TIO2.The profiles shall be approved shade in colour matched the RAL code 9016 profiles used for fabrication of windows and doors shall meet the stanards of BSEN:12608-2008 of wintech/fenesta/kommerling by SKYVUE fenestration or equivalent make should full fill the normative EN:477 ,EN:478, EN:479, EN :513, EN:514, EN:ISO 105-A01:1995, EN:ISO178 ,EN: ISO179-2 ,EN:ISO 306, EN:ISO 527 ,EN : IASTM :792 ISO 7724-3 . The profiles should be hollow,three chamfered structure coextruded with grey colour TPV(thermo plastic valcanizates)gasket to provide high insulation properties.The profile of all frame sections shall be reionforced with minimum 2mm(two millimetre) thick steel sections. The profiles of frame and sash shall be mitre cut and fusion welded at all corner i/c drilling of holes for fixing of hardware and anchor fastners.The G I reionforcement of 120GSM as per IS 875standard shall be inserted throught out the frame,sah ,mullions including providing & fixing 3 (three)nos of 125mm(one hundred twenty five millimetre) long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg(one hundred twenty five Kilogram), for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum1.25 mm (one point twenty five millimetre)thickness complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing supplying and Fixing factory made uPVC white colour casement/ casement cum fixed glazed windows made out of multichamfered UPVC section with TPV gaskets having isolated drainage and reionforcement with galvanised iron of 120 GSM profiles throughout rhe window.The outer frame having reinforcement of of 1mm(one millimetre) thickness,and sash with overall size 39x58mm (Thirty nine into Fifty eight milimetre)with reionforcement of 1.5mm(one point five millimetre) thickness.Double glazing bead for fixing of glass shall be provided and coextruded with gasket.The composition of proffile shall consist a minimum of 6PHR of Tio2 and not more than 12PHR ,of CaCo for every 100 parts of PVC resin. Window shall be provided with double glazing unit having two 6mm(Six milimetre) float glass, standard hardware and single point locking system of flush lock.The walll thicknes of frame and sash shall be 2 to 2.2mm(two to two point two millimetre) thick.The UPVC profiles used for fabrication of windows frames shall contains minimum of, 6PHR of TIO2 The profiles shall be approved shade in colour matched the RAL code 9016 profiles used for fabrication of windows and doors shall meet the stanards of BSEN:12608-2008 of wintech/fenesta/kommerling by SKYVUE fenestration or equivalent make should full fill the normative EN:477 ,EN:478, EN:479, EN :513, EN:514, EN:ISO 105-A01:1995, EN:ISO178 ,EN: ISO179-2 ,EN:ISO 306, EN:ISO 527 ,EN : IASTM :792 ISO 7724-3 . The profiles should be hollow,three chamfered structure coextruded with grey colour TPV(thermo plastic valcanizates)gasket to provide high insulation properties.The profile of all frame sections shall be reionforced with minimum 2mm (two millimetre)thick steel sections. The profiles of frame and sash shall be mitre cut and fusion welded at all corner i/c drilling of holes for fixing of hardware and anchor fastners.The G I reionforcement of 120GSM as per IS 875standard shall be inserted throughout the frame,sah ,mullions including providing & fixing 3(three) nos of 125 mm(one hundred twenty five millimetre) long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners,After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality all complete as per manufacturer's specification complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 39x58mm(thirty nine into fifty into fifty eight millimetre) & sash 39x58 mm(thirty nine into fifty eight millimetre) both having wall thickness of 2-2.2mm mm(two to two point two millimetre) and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Providing supplying and Fixing factory made uPVC white colour casement/ casement cum fixed glazed windows made out of multichamfered UPVC section with TPV gaskets having isolated drainage and reionforcement with galvanised iron of 120 GSM profiles throughout window.The outer frame having reinforcement of 1mm(one millimetre) thickness,and sash with overall size 39x58mm(Thirty nine into fifty eight milimetre) with reionforcement of 1.5mm(one point five millimetre) thickness.Double glazing bead for fixing of glass shall be provided and coextruded with gasket.The composition of proffile shall consist a minimum of 6PHR of Tio2 and not more than 12 PHR,of CaCo for every 100 parts of PVC resin. Window shall be provided with double glazing unit having two 6mm float glass, standard hardware and single point locking system of flush lock.The walll thicknes of frame and sash shall be 2 to 2.2mm(two to two point two millimetre) thick.The UPVC profiles used for fabrication of windows frames shall contains minimum of 6 PHR of TIO2. The profiles shall be approved shade in colour matched the RAL code 9016 profiles used for fabrication of windows and doors shall meet the stanards of BSEN:12608-2008 of wintech/fenesta/kommerling by SKYVUE fenestration or equivalent make should full fill the normative EN:477 ,EN:478, EN:479, EN :513, EN:514, EN:ISO 105-A01:1995, EN:ISO178 ,EN: ISO179-2 ,EN:ISO 306, EN:ISO 527 ,EN : IASTM :792 ISO 7724-3 . The profiles should be hollow,three chamfered structure coextruded with grey colour TPV(thermo plastic valcanizates)gasket to provide high insulation properties.The profile of all frame sections shall be reionforced with minimum 2mm (two millimetre)thick steel sections. The profiles of frame and sash shall be mitre cut and fusion welded at all corner i/c drilling of holes for fixing of hardware and anchor fastners.The G I reionforcement of 120GSM as per IS 875standard shall be inserted throughout the frame,sah ,mullions including providing & fixing 3(three) nos of 125 mm(one hundred twenty five millimetre) long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners,After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality all complete as per manufacturer's specification complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame,39x58 mm (thirty nine into fifty eight millimetre),& sash 39x58 mm(thirty nine into fifty eight millimetre) both having wall thickness of 2.00-2.20 mm (two point zero to two point two zero millimetre)and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).

Providing supplying and Fixing factory made uPVC white colour casement/ casement cum fixed glazed windows made out of multichamfered UPVC section with TPV gaskets having isolated drainage and reionforcement with galvanised iron of 120 GSM profiles throughout window.The outer frame having reinforcement of 1mm(one millimetre) thickness,and sash with overall size 39x58mm (Thirty nine into fifty eight milimetres)with reionforcement of 1.5mm(one point five millimetre) thickness.Double glazing bead for fixing of glass shall be provided and coextruded with gasket.The composition of proffile shall consist a minimum of 6PHR of Tio2 and not more than 12 PHR ,of CaCo for every 100 parts of PVC resin. Window shall be provided with double glazing unit having two 6mm(Six milimetre) float glass, standard hardware and single point locking system of flush lock.The wall thicknes of frame and sash shall be 2 to 2.2mm(two to two point two millimetre) thick.The UPVC profiles used for fabrication of windows frames shall contains minimum of 6,PHR of TIO2 The profiles shall be approved shade in colour matched the RAL code 9016 profiles used for fabrication of windows and doors shall meet the stanards of BSEN:12608-2008 of wintech/fenesta/kommerling by SKYVUE fenestration or equivalent make should full fill the normative EN:477 ,EN:478, EN:479, EN :513, EN:514, EN:ISO 105-A01:1995, EN:ISO178 ,EN: ISO179-2 ,EN:ISO 306, EN:ISO 527 ,EN : IASTM :792 ISO 7724-3 . The profiles should be hollow,yhree chamfered structure coextruded with grey colour TPV(thermo plastic valcanizates)gasket to provide high insulation properties.The profile of all frame sections shall be reionforced with minimum 2mm (two millimetre)thick steel sections. The profiles of frame and sash shall be mitre cut and fusion welded at all corner i/c drilling of holes for fixing of hardware and anchor fastners.The G I reionforcement of 120GSM as per IS 875standard shall be inserted throughout the frame,sah ,mullions including providing & fixing 3(three) nos of 125 mm(one hundred twenty five millimetre) long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners,After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality all complete as per manufacturer's specification complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Fixed window / ventilator made of (small series) frame 39x58 mm (thirty nine into fifty eight millimetre),& mullion 39x58 mm (thirty nine into fifty eight millimetre) both having wall thickness of 1.9 ± 0.2 mm(one point nine +/-zero point two millimetre) and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

Providing & fixing fly proof wire gauze of Zebra make to windows, clerestory windows & doors with M.S. Flat 15x3 mm(fifteen into three millimetre) and nuts & bolts complete Stainless steel (grade 304(three hundred four)) wire gauze of 0.5 mm(zero point five millimetre) dia wire and 1.4 mm (one point four millimetre) aperture on both sides complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm(two hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment).complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing, assembling and supplying vision toughned glass panels of double glass unit 6mm toughned KT series and fixed windows glass outside +12mm (twelve millimetre)air gap +5mm (five millimetre) inside clear toughned glass . the toughned glass shall be without any flaws, bubbles, scratchesless etcetera (IGUs) comprising of hermetically-sealed 6-12- 6 mm (six dash twelve dash six millimetre) insulated toughned glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened toughned glass 6mm (six millimetre) thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear toughned glass 6mm (six millimetre) thick, spacer tube 12mm (twelve millimetre) wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etcetera . all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing35mm(thirty five millimetre) thick.Second class teak wood shutters panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm(twenty five millimetre) to 40 mm (forty millimetre) thick Float glass make of saint Gobind Modi float, Aashai panes 6.0 mm(six point zero millimetre) thick glass panes (weight not less than15.00kg(fifteen kilogram ) per sqm) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm(twenty five millimetre) to 40 mm (forty millimetre) thick Pre-laminated particle board of Action tesa,Novapan National Archidply Green ply,Kitply make with decorative lamination on both sides, Grade I, Type II, IS:12823 marked complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 35mm (thirty five millimetre)thick MDF board flush door shutters make of kutty flush door ,kitply industries (swasik jawalla samrat laminate Pvt.Lid.(Samrate)CNC commercial Ltd. (Shivalik )S.R Jindel Ply wood Industries (Prima) with peep hole of size 30x30cm (thirty into thirty centimetre) fixed with 6mm (six millimetre) glass as per drawings and 1.00mm (one point zero zero millimetre)thick lamination on both side of flush door shutters of approved shade of Marino/Gren ply medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm (two point zero zero millimetre) thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etcetera all complete.(Peep hole glass and lamination shall be paid seprately) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing & fixing glass panes of Saint Govind Modi float Aashai make with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm(five point five millimetre) thick glass panes complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing0.63mm(zero point sixty three millimetre) thick PGI sheet of Tata make covering of approved pattern & design, made out of machine cut covering with stainless steel screws including providing aluminium washers 2 mm (two millimetre) thick , at a staggered pitch of 200mm (two hundred millimetre)centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etcetera . ccomplete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws make of GKW,Atul etcetera. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

300x16mm (Three hundred into sixteen millimetre) nominal size.

250x16mm (Two hundred fifty into sixteen millimetre) nominal size.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

200x10mm (Two hundred into ten millimetre) nominal size.

100x10mm (One hundred into ten millimetre) nominal size

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

125mm (One hundred twenty five millimetre)

75mm (Seventy five millimetre)

Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etcetera. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etcetera. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing steel roller for PVC sliding window with necessary screws etcetera complete.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing chromium plated brass 50 mm ( fifty millimetre) cupboard or wardrobe knobs (Link/Godrej/Hettich) with nuts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 40 mm ( forty millimetre) special quality bright finished brass cupboard or ward robe locks (Link/Godrej) with four levers of approved quality including necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 150 mm ( one hundred fifty milimetre ) bright finished floor brass door stopper with rubber cushion, necessary brass screws etcetera to suit shutter thickness complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 25mm ( twenty five milimetre) dia chromium plated brass curtain rod having wall thickness of 1.25mm ( one point two five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetera wherever necessary complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Triple strip vertical type magnetic catcher of approved quality (Hettich/Godrej) in cupboard / ward robe shutters, including fixing with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Kota stone 25mm ( twenty five millimetre) thick slab flooring over 20 mm ( twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Kota stone slabs 20 mm ( twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm ( twelve millimetre) (average) thick cement mortar 1:3 ( one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Kota stone 20 mm ( twenty millimetre) thick flooring in treads of steps and risers using single length up to 2.00 ( two) metre with 18 mm ( eighteen millimetre) thick marble stone, as per sample of marble approved by Engineer-in-charge,over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:4 ( one cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of Orient/ Kajaria/ Nitco, Somany, Rak, Johnson & Johnson approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etcetera complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 10 mm ( ten millimetre) thick acid and/or alkali resistant tiles of Orient/ Kajaria/ Nitco, Somany, Rak, Johnson & Johnson approved make, in all colours and shades using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 10mm (ten millimetre)thick Antistatic Vitrified tiles of sizes 60x60cm(sixty into sixty centimetre) of Orient/ Kajaria/ Nitco, Somany, Rak, Johnson & Johnson approved make, in all colours and shades to provide antistatic conductive,abrasion resistant,hard wearing and laveled floor in Asc blue colour suitable for the specified use laid on the existing floor with proper application process .The antistatic conductive rectified vetrified tiles with all punched corner of make H& R Johnson India/Orient/Rak/Kajaria/Nitco shoud have clectrical resistace-conductive less than 1(one) Mega Ohm with Static decay time less than 0.5(zero point five)seconds and area of each tiles should be 0.36sqm(zero point thirty six square metre).The tiles should be fixed using tiles adhesive tiles suitable to fix antistatic vetrified in minimum 6mm(six milimetre) thick in cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477 bed and by leaving a space of minimum 5mm(five millimetre) around each tile with the help of + shaped PVC spacer suitable to leave a groove of 5mm (five millimetre)around all four sides of each tiles .After curng of minimum 24(twenty four)hours prepare a grid of 18 (eighteen)gauge anilated pure copper wire arround all four sides of antistatic conductive endura tiles.wire should be fixed with the earthing point of the room with the help of bus bar .All the grooves than should be properly filled with the black coloured antistatic epoxy grout spectrum ASEG and all the four punched corrners of all the tiles should also be filled with the same antistaic grout Spectrum ASEG and allow to cure and complete the work in all respect (Payment for grouting of joints to be made separately)complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying matt finished vitrified tile Full body matt finished / Double charged of size 600x600 x 16mm (Six hundred into six hundred into sixteen millimetre)having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etcetera. of Nitco /Kajaria/ Somany/Johnson & Johnson L/ Orient/Rak make, laid on 20mm thick base of cement mortar 1:4 (one cement : four coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etcetera complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body charged Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% ( zero point zero eight percent) and conforming to I.S. 15622, of Orient/ Kajaria/ Nitco, Somany, Rak, Johnson & Johnson approved make , in all colours and shade, in skirting, riser of steps, over 12 mm ( twelve millimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square metre) including grouting the joint with white cement & matching pigments etcetera complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying Antibacterial /dust resistant/minor washable/Germ free Vitrified tiles in 30x60 cm(thirty into sixty centimetre) sizes make of kajaria,Nitco,,somany,Orient,RAK,Johnson & johnson (of approved shade) shall be installed strictly (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm (Six milimetre) thickness, including grouting of joints (Payment for grouting of joints to be made separately). complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Grouting the joints of flooring tiles of size 600x600 mm (six hundred into six hundred millimetre)having joints of 3 mm(three millimetre) width, using epoxy grout mix of 0.70 kg(zero point seventy kilogram,) of organic coated filler of desired shade (0.10 kg (zero point ten kilogram )of hardener and 0.20 kg (zero point twenty kilogram)of resin per kg), including filling / grouting and finishing complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying Full body matt finished / Double charged antiskid vitrified tile of size 300x300 x 9.8mm (three hundred into three hundred into nine point eight millimetre) having with water absorption less than 0.5% (Zero point five percentage)and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etcetera of Nitco/Kajaria/Somany/Johnson & Johnson /Orient/Rak make laid on 20mm(twenty millimetre) thick base of cement mortar 1:4 (one cement : four coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etcetera complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 1st quality ceremic digital glazed floor tiles (600mmx600 mm size) ( Six hundred into six hundred millimetre) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make of kajaria ,Nitco ,somany ,orient,rak,johnson & johnson, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre ) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying Polished Granite stone ( slab jet Black, Cherry Red, Elite Brown, Cat Eye colour) flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera all complete as specified and as directed by the Engineer-in-Charge.Polished upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Stone tile work 8mm thick (mirror polished and machine cut edge)Raj Nagar plain white marble/ Udaipur green marble / Zebra black marble for wall lining upto 10 m(ten metre) height with special adhesive over 12 mm (twelve millimetre)thick bed of cement mortar 1:3 (one cement : three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.all complete as specified and as directed by the Engineer-in-Charge.Polished upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Extra for pre finished nosing to treads of steps of marble stone complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etcetera, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge 60mm(sixty millimetre) thick cement concrete paver block of M-35(M-Thirty five) grade with approved colour, design &pattern of NTC make . complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm ( twenty into ten into two millimetre) and braced with flat iron diagonals 20x5 mm ( twenty into five millimetre) size, with top and bottom rail of T-iron 40x40x6 mm, ( forty into forty into six millimetre) with 40 mm ( forty millimetre) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing precoated sandwich puff roofing with top skin of 0.60mm (zero point sixty millimetre) thickness prepainted profiled steel sheet(size, shape and pitch of corrugation as approved by Engineer-in-charge) (TATA/SAIL /JSW Make) made of cold rolled steel coil having a puf depth 50mm (Fifty millimetre) rock wool and interior skin of prepainted galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.60 mm(zero point sixty millimetre) (+ 0.05 %)( zero point zero five percentage) total coated thickness with zinc coating 120(one hundred twenty) grams per sqm as per IS: 277, in 240 (two hundred forty)mpa steel grade, 5-7(five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen to eighteen)microns. Sheet should have protective guard film of 25(twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m(twelve ) metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)(five point five into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing precoated Ridges plain (500 - 600mm)(five hundred to six hundred millimetre)sandwich puff roofing with top skin of 0.60mm (zero point sixty millimetre) thickness prepainted profiled steel sheet (size, shape and pitch of corrugation as approved by Engineer-in-charge) (TATA /SAIL /JSW Make) made of cold rolled steel coil having a puff depth 50mm (Fifty millimetre) rock wool and interior skin of prepainted galvanised steel sheet roofing accessories 0.60 mm(zero point sixty millimetre) (+0.05 %)( zero point zero five percentage) total coated thickness, Zinc coating 120(one hundred twenty) grams per sqm as per IS: 277, in 240 (two hundred forty) mpa steel grade, 5-7 (five to seven )microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen to eighteen ) microns using self drilling/ self tapping screws complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing Crimp curve roofing with top skin of 0.60mm (zero point sixty millimetre) precoated sandwich puff thickness prepainted profiled steel sheet (size, shape and pitch of corrugation as approved by Engineer-in-charge) make of TATA Durashine/sail/JSW made of cold rolled steel coil having a puff depth 50m(Fifty millimetre) rock wool and interior skin of prepainted galvanised steel sheet roofing accessories 0.60 mm (zero point sixty millimetre) (+0.05 %)( zero point zero five percentage) total coated thickness, Zinc coating 120(one hundred twenty) grams per sqm as per IS: 277, in 240(two hundred forty) mpa steel grade, 5-7 (five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen to eighteen ) microns using self drilling/ self tapping screws complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing Flashings/ Aprons.( Upto 600 mm (six hundred millimetre)) precoated sandwich puff roofing with top skin of 0.60mm ( zero point sixty millimetre) thickness prepainted profiled steel sheet(size, shape and pitch of corrugation as approved by Engineer-in-charge) make of TATA Durashine/sail/JSW made of cold rolled steel coil having a puff depth 50mm (Fifty millimetre) rock wool and interoir skin of prepainted galvanised steel sheet roofing accessories 0.60 mm (Zero point sixty millimetre) (+0.05 %)( zero point zero five percentage) total coated thickness, Zinc coating 120(one hundred twenty ) grams per sqm as per IS: 277, in 240(two hundred forty) mpa steel grade, 5-7( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen to eighteen) microns using self drilling/ self tapping screws complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing Gutter (600 mm (six hundred millimetre) over all girth) precoated sandwich puff roofing with top skin of 0.60mm (zero point sixty millimetre) thickness prepainted profiled steel sheet(size, shape and pitch of corrugation as approved by Engineer-in-charge) make of TATA Durashine made of cold rolled steel coil having a puff depth 50mm (Fifty millimetre) rock wool and interior skin of prepainted galvanised steel sheet roofing accessories 0.60 mm(zero point sixty millimetre) (+0.05 %) ( zero point zero five percentage)total coated thickness, Zinc coating 120 (one hundred twenty ) grams per sqm as per IS: 277, in 240 (two hundred forty)mpa steel grade, 5-7 (five to seven ) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen to eighteen) microns using self drilling/ self tapping screws complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing 110mm ( one hundred ten millimetre) dia of Diplast ,prince supreme finolex make unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme/Finolex/Diplast/ prince make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing bend 87.5 degree 110mm (one hundred ten millimetre) dia of Supreme/Finolex/Diplast/ prince make on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Shoe (Plain) 110mm (one hundred ten millimetre) dia of Supreme/Finollex/Diplast/ prince make on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Coupler 110mm dia (one hundred ten millimetre) dia of Supreme/Finolex/Diplast/ Prince make on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Single tee with door 110x110x110mm (one hundred ten into one hundred ten into one hundred ten millimetre) dia of Supreme/Finolex/Diplast/ Prince make on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Single tee without door 110x110x110mm (one hundred ten into one hundred ten into one hundred ten millimetre) dia of Supreme/Finolex/Diplast/ prince make on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre)diametre nominal size M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work in built up Galvanised tubular section ( TATA/SAIL/Jindal painther of (JSPL)shyame Steel, RINL MAKE) (round, square or rectangular hollow tubes etcetera .) in trusses and trussed purlins in building including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etcetera Hot finished welded type tubes complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections (TATA/SAIL/Jindal Panther of (JSPL),Shyam Steel ,RINLMake ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera . as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S mild steel tube hand rail of approved size by welding etcetera to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm(five hundred ninety five into five hundred ninety five millimetre) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120(one hundred twenty ) grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm (twenty four into thirty eight millimetre) made from 0.30 mm(zero point thirty millimetre) thick (minimum) sheet, spaced at 1200 mm(one thousand two hundred millimetre) center to center and cross "T" of size 24x25 mm(twenty four into twenty five millimetre) made of 0.30 mm (zero point thirty millimetre) thick (minimum) sheet, 1200 mm(one thousnd two hundred millimetre) long spaced between main "T" at 600 mm(six hundred millimetre) center to center to form a grid of 1200x600 mm(one thousand two hundred into six hundred millimetre) and secondary cross "T" of length 600 mm (six hundred millimetre)and size 24x25 mm(twenty four into twenty five millimetre) made of 0.30 mm(zero point thirty millimetre) thick (minimum) sheet to be interlocked at middle of the 1200x600 mm (one thousand two hundred into six hundred millimetre)panel to form grids of 600x600 mm (six hundred into six hunded millimetre)and wall angle of size 24x24x0.3 mm(twenty four into twenty four into zero point three millimetre) and laying false ceiling tiles of approved texture in the grid including,required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etcetera . Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm (Twenty seven into thirty seven into twenty five into one point six millimetre)fixed to ceiling with 12.5 mm(twelve point five millimetre) dia and 50 mm(fifty millimetre) long dash fasteners, 4 mm(four millimetre) GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm(eighty five into thirty into zero point eight millimetre) spaced at 1200 mm (one thousand two hundred millimetre) center to center along main T, bottom exposed width of 24 mm (twenty four millimetre)of all T-sections shall be pre painted with polyester paint,8 mm(eight millimetre) thick Everest Designer fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 (two hundred twenty five)kg/ sq. cm, bending strength 100(one hundred) kg/sq. cm , of size 595x595 mm,(five hundred ninety five into five hundred ninety five millimetre) having perforation of dia. 10 mm(ten millimetre) with minimum perforated area 18 (eighteen) % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85(zero point eighty five) with 50 mm (fifty millimetre) thick rockwool of 48 (forty eight )kg /cum backing.all complete for all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Accustic Aerolite sheet mineral fibre false ceiling tiles at all heights of size 595X595mm(five hundered ninety five into five hundred ninety five millimetre) of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%(Ninety nine precentage), Light Reflectance > 85%(eighty five precentage), Thermal Conductivity k = 0.052 - 0.057( zero point zero five two to zero point zero five seven) w/m K, Fire Performance as per (BS 476(four hundred seventy six) pt - 6 &7 (six and seven))in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm (zero point thirty three millimetre)thick (galvanized @120(one hundred twenty) gsm) comprising of main T runners of 15x32 mm (fifteen into thirty two millimetre)of length 3000 mm (three thousand millimetre), cross T of size 15x32mm (fifteen into thirty two millimetre)of length 1200 mm(one thousand two hundred millimetre) and secondary intermediate cross T of size 15x32 mm(fifteen into thirty two millimetre) of length 600 mm(six hundred millimetre) to form grid module of size 600x600 mm (six hundred into six hundred millimetre) suspended from ceiling using galvanized mild steel item(galvanised@80 (eighty)gsm) 50 mm (fifty millimetre) long 8mm (eight millimetre) outer diameter M-6(six) dash fasteners, 6 mm(six millimetre) diameter fully threaded hanger rod up to 1000 mm (one thousand millimetre) length and L-shape level adjuster of size 85x25x2 mm (eighty five into twenty five into two millimetre), spaced at 1200 mm (one thousand two hundred millimetre) centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm (twenty four into twenty four into three thousand millimetre) made of 0.40 mm(zero point forty millimetre) thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm(four hundred fifty millimetre) centre to centre & 40 mm (forty millimetre) long dry wall S.S. screws. The exposed bottom portion of all Tsections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights.The work shall be carried out as per specifications,drawings and as per directions of the engineer-incharge.With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) ( Noise Reduction Coefficient) of 0.7(zero point seven ) .all complete for all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 75mmx60mm Seventy five milimetre into Sixty milimetre)wooden moulded Second class teak wood hand railing with iron screws, plugs and priming coat on unexposed surface etcetera complete. to straight length fixed in position with hold fast lugs or with dash fasteners of required dia and length ( including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing mild steel(Tata, Sail, Jindal Painther ) round holding down bolts with nuts and washer plates complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero per ten square metre)(ASAIN/NEROLAC/Berger paint of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat With ready mixed pink or Grey primer (ASAIN/NEROLAC/IBerger ) of approved brand and manufacture on paint wood work (hard and soft wood) Ready mixed paint brushing including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade with Two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five per ten square metre) (ASAIN/NEROLAC/ICI-Berger of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Polishing on New wood work with ready mixed wax polish of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

6 mm ( six millimetre ) plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

20 mm (twenty millimetre) cement plaster of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer (ASAIN/NEROLAC/ICI-Berger paints ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with 100%(Hundred percent) Premium acrylic emulsion paint having VOC less than 50(fifty) gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (ASAIN/NEROLAC/ICI-Berger paint ) of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @1.43 litre/ 10 sqm(One point forty three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point ninety litre per ten square metre)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm ( at the rate of one point six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ( at the rate two point two zero kilogram per ten square metre) (ASAIN/NEROLAC/IBerger paints including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm (Four point four kilogram per square metre) mixed with water proofing compound make of folloc,CICO,pidilite impermo by M/S snowcem sika conforming to IS 2465 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm (Twenty millimetre) cement plaster 1:3 (One cement : three coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm (One point seven kilogramme per sqaure metre) of area. (iv) IVth course of 400 (Four hundred) micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm (One hundred millimetre) wide and pasted to each other with bitumen @ 1.7 kg/sqm) (One point seven kilogramme per square metre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 23cm(twenty three centimetre) dia half round (to level or slopes) and joining with stiff mixture of cement mortor in the proportion of 1:1 (one cement : one sand) salt glazed stone ware pipes grade "A" of the following internal diametres including testing of pipes and joints complete.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing & fixing glass panes of Saint Govind Modi Float Aashai make with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm(four point zero millimetre) thick glass panes complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing sheet covering over expansion joints with iron screws as per design.Aluminium fluted strips 3.15 mm (three point fifteen millimetre) thick and 150mm (one hundred fifty millimetre) wide complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing 12mm (twelve millimetre) thick GRC Tiles /cladding of Uni stone work for wall lining upto 10 m (ten metre) height with special adhesive over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government .

WATER SUPPLY AND SANITARY INSTALLATION

Providing and fixing water closet squatting pan (Indian type W.C. pan ) make of parryware ,Hindware,Saintaryware ,cera Neycear with 100 mm ( one hundred millimetre) sand cast Iron P or S trap, 10 ( ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C.pan of size 580x440 mm ( five hundred eighty into four hundred forty milimetre) with integral type foot rests hindware ,cera Universal Pan No. 2071 ( two thousand seventy one) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type)make of parryware, Hindware,Sanitaryware ,Neycer ,Cera with seat and lid, 10 (ten ) litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I. brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make,of Parryware ,Hindware Sanitaryware ,Neycer,cera shape, size and pattern including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etcetera including making connection with the existing P/S trap, complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm(Fifteen milimetre) C.P. brass single hole basin mixer of approved quality and make including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm ( five hundred fifty into four hundred millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware , Cera ,Parryware Sanitaryware ,Neycer make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 610x510 mm (Six hundred ten into five hundred ten millimetre) bowl depth 200mm (Two hundred millimetre) Stainless Steel A ISI 304 (18/8) kitchen sink without drain board ( Diamond /AMC.UNIK as per IS:13983 with C.I. brackets and stainless steel plug 40mm (Forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Stainless Steel kitchen sink No 1916 with drain board of overall size 480x405mm (four hundred eighty into four hundred five millimetre) of AMC,UNIK,Diamond sink with C.I. brackets and stainless steel plug 40 mm(forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board bowl depth 225mm (two hundred twenty five milimetre) of Diamond make including painting of fittings and brackets, cutting and making good the walls wherever required including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing P.V.C. waste semi rigid pipe for sink or wash basin including P.V.C. waste fittings complete.32mm ( thirty two millimetre) dia of finolex /kitech make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of ( Modigaurd/ Atul/ golden fish make) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm ( six hundred millimetre) long towel rail with total length of 645 mm ( six hundred forty five millimetre) width 78 mm ( seventy eight millimetre) and effective height of 88 mm ( eighty eight millimetre) weighting not less than 190 Grms (One hundred ninety Grams) of Prayag ,viking make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600 x 120 x 5mm ( six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etcetera, complete of Hindware or Cera make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT soap Dish Holder having length of 138mm,( one hundred thirty eight millimetre ) breadth 102mm ( one hundred two millimetre ) height of 75mm ( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six gram) Of ,prayag ,viking Make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore dia C.P. brass bib cock of approved quality conforming to IS standards 8931of Jaquar,Gem.Jal,Seiko,ESSESS,Parko,kingston,Techno Make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore dia C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (eight hundred ten gram) of Make of Jaquare Gem ,Jal Seiko ESSESS,Parko ,kindston ,Techno including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass stop cock conceled of standard design and of approved quality conforming to IS:8931 of Make of Jaquar, Seiko ,kingston GEM,Parko ,Techno Jal, ESSESS including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre ) length 15mm (fifteen millimetre) nominal bore Finolex Make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) nominal bore gun metal gate valve with C I wheel of approved quality (screwed end) make of leader,Zoloto ,Kilburn,CIM,Valves ,sant including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre)nominal size gun metal gate valve with C I wheel of approved quality (screwed end) make of Leader Zoloto,Kilburn,CIN, valves ,Sant including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre)nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete make of Jaquar ,Jal,Parko,Zoloto,Sant. L&K Leader ,.GEM including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore Ferrule with C.I mouth cover including boring and tapping the main of Tata/Jindal make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Making connection of G.I distribution branch with G.I main 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete make of unik.KS,.ANICO. AVR.NVR,.RR.Suw including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 (seven point five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 120x90 cm (one hundred twenty into ninety centimetre) and 90 cm (ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg (fifty eight kilogram) With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 (seven point five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five kilogram) and frame to be not less than 2.70 kg (two point seven zero kilogram) as per,standard design square mouth trap 100 x100mm (one hundred into one hundred millimetre) ( size P-type,With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 (seven point five ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal size G.I. Pipes make of B.S.T,Jindal,Hissar)Tata Steel Tubes Ltd. prakash survya complete with G.I. fittings make of Unik, KS,AMCO ,AVR,NVR,RR,Suw and clamps, including making good the walls etcetera concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) nominal size G.I. Pipes make of B.S.T,Jindal,Hissar)Tata Steel Tubes Ltd. prakash survya complete with G.I. fittings make of Unik, KS,AMCO ,AVR,NVR,RR,Suw and clamps, including making good the walls etcetera concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium, Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 1216 (16mm O D pipe) (sixteen millimetre) nominal size of Kitech make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium ,Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera ., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 1620 mm (20mm OD pipe) (twenty millimetre) nominal size of Kitech make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing one piece full stall urinals producy code OC-13 in white shade of Parryware,Hindware,Sanitaryware ,Neycer,Cera make construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etcetera wherever required :Single squatting plate with 5 (five) litre P.V.C. automatic flushing cistern including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing one piece full stall urinals producy code OC-13 in white shade of Parryware,Hindware,Sanitaryware,Neycer,Cera make construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etcetera . wherever required :Range of four squatting plate with 10 (ten) litre P.V.C. automatic flushing cistern including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P Brass toilet paper holder make of Jaquar ,Jal,Parko,Kingston GEM.Techno ,ESS,ESS including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) dia CP Brass Single lever telephonic wall mixer of quality and make of Jaquar ,Kingston ,Gem ,Parko,Techno ,Jal ,ESS ESS ,seiko as approved by Engineer in charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) dia CP Brass sensor type wall mixer of quality and make of Jal, Jaquare ,hindware as approved by Engineer in charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8mm dia C.P/SS jet with flexible tube upto 1 meter ( one metre) long with SS triangular plate to European type WC of quality and make as approved ( Jaquar/Cera/Hindware) by as per direction of Engineer in Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing UPVC floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, Supreme/finolex/Kitech make including cost of cutting and making good the walls and floors floor trap 100 mm(one hundred millimetre) inlet and 100 mm(One hundred millimetre) outlet sand cast iron S&S as per IS :3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing C.I .cast iron cover without frame for manhole cast iron cover 455x610mm(Four hundred fifty five into six hundred ten millimetres) rectangular (Light duty single seal pattern-I) internal dimensions the weight of cover to be not less than 23kgs(Twenty three kilogram) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm (twenty into twenty into ten centimetre) cement concrete blocks 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (twenty millimetre) nominal size) as per standard design With 20x20 mm (twenty into twenty millimetre) square bar including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 100mm (one hundred millimetre) diametre S.W pipes (ISI marked) cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) up to haunches of S.W. pipes including bed concrete as per standard design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

H. C. Bansal Engg. & Contt.

rajesh kumar suman