8804 REPAIRS TO CHILDREN PARK, PATH, MANHOLE COVERS AND DRAIN COVERS AT AF STATION, BAREILLY

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:4) all as specified.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6), except bricks all as specified. Note: Serviceable bricks obtained from demolition shall be reused for this item

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster

M&L for rendering 15mm thick in CM (1:4) on brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces of walls & applying two coats of cement based paint all as specified and as directed.

Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M&L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregate and setting in cement mortar (1:6) complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F high strength deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

M&L for providing precast cement concrete louvers and jallies, type B0, 1:2:4 (12.5mm graded aggregate), 35mm thick (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified and as directed including demolition of existing jallies.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) all as specified and as directed.

M&L for PCC 75mm thick type D2 (1:4:8) using 40mm graded aggregate as in sub-base for flooring/ hard standing complete all as specified.

M&L for PCC 100mm thick type D2 (1:4:8) using 40mm graded aggregate as in sub-base for flooring/ hard standing complete all as specified.

M&L for River sand filling under floors or in foundations including watering and consolidation all as specified. [Note: Thickness after consolidation shall be considered for payment]

Supply and laying 60mm thick machine pressed coloured precast concrete M-35 grade, interlocking Paver Blocks, PVC mould reflective type conforming to IS - 15658 of any shape and size with grey cement and pigment complete all as specified and as directed.

M&L for pre-polished coloured chequered cement concrete tiles of size 300x300mm, 25mm thick, set, jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles laid over and including 20mm thick screed bed in CM 1:6 complete all as specified.

M&L for providing cement concrete type B0, 1:2:4 using 12.5mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates etc complete including necessary formwork all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290, Gde-E-165 all as specified and as directed.

M&L for preparation of new or previously untreated steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for preparation of old painted steel/ iron surfaces of any description exceeding 10 cm in width or girth by scrapping with wire brushes/ sand papering, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for preparation of old painted brick, stone, concrete or plastered surfaces of road side kerbs and applying one coat of synthetic enamel paint in zebra pattern i.e. in two different colours as directed, complete all as specified

Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 16 of tender document i.e. Rs. 1,02,336.00

Ikrar khan & co.

VINOD TRADING CORPORATION

S R BUILDERS

REHAN CONSTRUCTIONS

S.K.Enterprises

AJAY BUILDCON ENGINEERS AND CONTRACTORS

M/s Shri krishna Constrcutions

M/s Agarwal Builders