Erection & Maintenance and Labour works for Laying, testing & commissioning of 11/22 KV underground XLPE cable (XLPE cable to be supplied by DGVCL), with cable End termination & straight through jointing kits (to be supplied by contractor) for Various feeder under jurisdiction of Bilimora Town sub division under Various Scheme under Valsad Rural Division.

Item Code Item Unit FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING

FIXING OF CROSS ARMS, CLAMPS ANTI-CLIMBING

DEVICES, DANGER BOARD, INSULATORS ETC.

1 9926000001 COMPLETE AND PAINTING OF FABRICATED No.

MATERIALS AND NUMBERING COMPLETE WITH COST

OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH,

FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC. COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS

INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS

3 9926000003 ANTI-CLIMBING DEVICES, DANGER BOARD, No.

INSULATORS ETC. COMPLETE AND PAINTING OF

STEEL POLE, FABRICATED MATERIALS USED ON THE

POLEAND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR

RAILWAY CROSSING ON BG/MG/NG LINE FOR

0.400/11/22KV OVERHEAD LINES I.E INCLUDING

EXCAVATION OF PIT & REFILLING OF EARTH, FIXING

CROSS ARMS, TOP FITTING CLAMPS,ANTI-CLIMBING

4 9926000004 DEVICES DANGER BOARD, INSULATORS ETC. No.

COMPLETE AND PAINTING OF STEEL POLES,

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF

METERS 200 KG PSC POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO

METERS.STEEL POLE INCLUDING EXCAVATION OF

PITS & REFILLING OFEARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING

DEVICES DANGER BOARDS, INSULATORS

ETC.COMPLETE & PAINTING OF POLES,FABRICATED

MATERIALSUSED ON THE POLES AND NUMBERING

WITH COST OF PAINTSAS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH, HG FUSES OF 8 MTRS

KG PSC POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH,FIXING OF CHANNELS

SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING

7 9926000007 DEVICES, DANGER BOARDS, INSULATORS,DOFUSES No.

ETC. COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGOF ERECTION OF

GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH,HG FUSES, 9 TO

METERS STEEL POLES INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH, FIXING OFCHANNEL,

SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING

DEVICES , DANGER BOARDS, INSULATORS, ETC.

COMPLETE AND PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH

MOUNTING OFAB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 8 METER,200KG PSC POLE

METERS POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS

CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USEDON THE

POLES AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH,HG FUSES

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES

INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTH CARTING OF TRANSFORMERS FROM STORE TO

SITE, FIXINGOF CHANNELS SUPPORTING ANGLES,

BRACING, CROSS ARMS,CLAMPS, ANTICLIMBING

DEVICES, DANGER BOARDS,CONDUCTOR AND CABLE

WIRING ETC. COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTIONS OF GUY SETS AND

ERECTION OF GUY SET INCLUDING EXCAVATION OF

PITS & REFILLING OF EARTH AS PER STANDARD

SPECIFICATION WITH STAY CLAMPS, STAY WIRE,

ANCHOR ROD, TURN BUCKLE, EYEBOLT, GUY

INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT

EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS, ETC. INCLUDING

COST OF CEMENT SAND METAL (1:2:4) AND WATER

ETC. AS PER STANDARD SPECIFICATION.(cement

Should be 53 grade) used for Concreting.

ERECTION OF COIL TYPE EARTHING INCLUDING COST

OF COAL,SALT ETC. BUT WITHOUT COST OF GI WIRE

AS PER STANDARD SPECIFICATION(20kg solt+20kg

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING

INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT

COST OF PIPE/GIPLATE GI WIRE AS PER STANDARD

SPECIFICATION.(20kg solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE COMPLETE

WITH CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK

15 9926000015 WOOD BUSH,REFLECTORS FUSE, WIRING ETC. AS PER No.

STANDARD SPECIFICATION BUT EXCLUDING COST OF

STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA

CONDUCTOR for ALL TYPE OF CONDUCTOR (EXCEPT ONE

16 9926000016 DOG CONDUCTOR) FOR 11/22KV & LT LINES COND

INCLUDING FIXING OF INSULATORS, BINDING PER KM

STRINGING OF GI WIRE 8 SWG INCLUDING BINDING

PROVIDING SINGLE PHASE SERVICE CONNECTION

WITH PVC 2.5/4MM2 TWIN CORE CABLE FROM

TERMINAL POLE TO METERING POINT INCLUDING

FIXING OF METER WITH METER EARTHING COMPLETE

WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE

CONNECTION WITH PVC 4MM2/10MM2 FOUR CORE

CABLE FROM TERMINAL POLE TO METERING POINT

19 9926000019 INCLUDING FIXING OF METER WITH METER No.

EARTHING COMPLETE WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD

ROCK AREA FOR ERECTION OF POLE/ GUY ETC. AS

PER STANDARD SPECIFICATION OVER & ABOVE

20 9926000020 NORMAL COST COVERED AGAINST EXCAVATION OF No.

PIT UNDER NORMAL SOIL FOR ERECTION OF

POLE,GUY, DOUBLE POLE STRUCTURE EARTHING

WITH THE APPROVAL OF SUPDT.ENGINEER.

PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL

PROVIDING GUARDING OF LT LINES ON ROAD/RAIL

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD

25 9926000025 CROSSING,HT LINE CROSSING AND TELEPHONE LINE No.

CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING ARRESTOR,

DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC

POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROM STORES TO SITE, FIXING OF CHANNELS,

26 9926000026 SUPPORTING ANGLES,BRACINGS CROSS ARMS No.

CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE

POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH

MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS, LIGHTENINGARRESTOR,

DISTRIBUTION BOX. ON 9 to 11 METERS RSJ

POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROM STORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS

CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE

POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH,

FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC. COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF

METERS 270 KG PSC POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2 AAAC ONE

30 9926000030 CONDUCTOR FOR 11/22KV & LT LINES INCLUDING COND

FIXING OFINSULATORS, BINDING JUMPERING ETC. PER KM

STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT ONE

31 9926000031 LINES INCLUDING FIXING OF INSULATORS, BINDING COND

JUMPERING ETC. PER KM

ERECTION OF DOUBLE POLE STRUCTURES WITH

MOUNTING OF AB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS 270 KGAND

PSC POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS

CLAMPS, ANTI-CLIMBING DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE & STACKING

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE & STACKING

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR

PSC POLE) (WITH TRANSFORMER) WITH CREDITING

35 9926000035 OF FABRICATION & TRANSFORMER AT STORE & No.

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR

PSC POLE) (WITHOUT TRANSFORMER) WITH

36 9926000036 CREDITING OF FABRICATION AT STORE & STACKING No.

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC. FOR

FIXING OF MESSENGER WIRE AND TO PROVIDE

SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED

& DIRECTED BY ENGINEER IN CHARGE.

38 9926000038 STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ KM

MM+1*35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE

INSULATOR ETC. FOR FIXING OF MESSENGER WIRE

AND TO PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN INSULATOR,PREPARING

SHACKLE POINT,JUMPERS ETC. AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ

MM INCLUDING FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

40 9926000040 FIXING OF CROSS ARM, BINDING TO PIN KM

INSULATOR,PREPARING SHACKLE POINT,JUMPERS

ETC. AS REQUIRED AND DIRECTED BY ENGINEER IN

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ

MM+ 35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE

INSULATOR ETC. FOR FIXING OF MESSENGER WIRE

AND TO PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER

DISMENTALING OF RSJ (9/11 METER) POLE AND

CREDITING THE OLD MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON

10MTR,270KG PSC POLE(WITHOUT TRANSFORMER)

43 9926000043 WITH CREDITING OF FABRICATION AT STORE AND No.

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON

10MTR,270KG PSC POLE(WITH TRANSFORMER) WITH

44 9926000044 CREDITING OF FABRICATION AT STORE AND No.

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ

45 9926000045 MM AND CREDITING FITTING OF ALL ACESSARIES KM

AND FABRICATION TO DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ

46 9926000046 MM AND CREDITING FITTING OF ALL ACESSARIES KM

AND FABRICATION TO DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ

MM AND CREDITING FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ

MM+ 35 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT

DOG CONDUCTOR) FOR 11/22KV & LT LINES

INCLUDING FIXING OF INSULATORS, BINDING

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT

LINES INCLUDING , BINDING JUMPERING ETC.

LABOUR CHARGE FOR THE INSTALLATION OF NEW

DTR METER. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR

53 9926000053 METER AND OLD METER SHOULD BE CREDITED TO No.

SDN STORE. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR

54 9926000054 METER CONNECTION. (CT COIL WILL BE PROVIDED PER CT

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR

DTR METER CONNECTION AND OLD CT SHOULD BE

CREDITED TO SDN STORE. (CT COIL WILL BE

PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR DTR

METER (MMB WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF DTR METER

BOX. (METER WILL BE PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE

58 9926000058 COPPER CABLE 3.5 METER (CABLE TO BE PROVIDED No.

LABOUR CHARGE FOR PROVIDING/RECONNECTION OF

59 9926000059 TERMINAL CONNECTION WITH PROPER SIZE OF

LUGS. (LUGS COST IS BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT READING OF DTR

60 9926000060 METER WITH DETAIL SURVEY OF DEFECT IF ANY. A

DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY

IN PRO-FORMA REPORT SHOULD BE SUBMITTED TO

SDN OFFICE.(* ONLY IF ALL PARAMETER OF

VOLTAGE, CURRENT & LOAD AS SHOWN IN PER-

FORMA IS FILLED) AS PER THE INSTRUCTION OF

ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR

METER WITH DETAIL SURVEY OF DEFECT IF ANY. A

DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY

61 9926000061 IN PRO-FORMA REPORT SHOULD BE SUBMITTED TO

SDN OFFICE. (DULY FILL PER-FORMA IN FAULT

CONDITION IN WHICH READING PARAMETER IS NOT

SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER

BOX, PROVIDING & FIXING OF 1.5SQ MM SINGLE

STRAND 10 CORE ARMOURED COPPER CABLE

(3.5METER), TERMINATION IN METER & COIL

ETC.(METER, METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER

BOX, TERMINATION IN METER & COIL ETC.

(WITHOUT 10CORE COPPER CABLE) (METER, METER

BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance not

more than 0.75 mtr with 6 turns minimum on XLPE

Cable with single strand binding wire (including cost of

Supply and Installation of 11/22 kV Distribution

Transformers HT Terminal protector (UV Resistance) PER

with using 95/120/150 sq.mm long barrel aluminum SET

lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV

Distribution Transformer with replacement of bare

conductor by HT ABC conductor (DO bottom side to PER

transformer) after removal of semi conductor by HT SET

ABC (6 inch both side). HT ABC to be supplied by

DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic)

67 9926000088 Type, Earth Electrodes for HT Feeder Pole Having 2000 NO

mm Electrode Length as per the Tender Specifications

and Drawing. (All Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic)

68 9926000089 Type, Earth Electrodes for HT Feeder Pole Having 3000 NO

mm Electrode Length as per the Tender Specifications

And Drawing. (All Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having

hot dip- galvanized-zinc coating of 80-100 microns

without any joints or welding. Both the end of the GI

strip should be connected with GI nut bolts and

required fabrication work for giving separate earthing

(1) Neutral of the transformer

(2) MS structures of the transformer center

(Approximately 25 meter GI strip per transformer

- as per requirement and instruction of Engineer

in- charge) (All Materials will be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of

1.25" diameter for covering GI strip with UV protected

Cable Ties of 550 X 7.6 mm size to bind with pole

face(Approximately 25 meter uPVC pipe for GI strip

covering per transformer centre -as per requirement

and instruction of Engineer in-charge.

Supply & fixing of upto 33 kV Conductor sleeve for

Busbar to Drop out Fuse and Drop out fuse to

71 9926000093 Transformer H.T. including Busbar (12 mm sleeve) as Per TC

per technical specification. (All Materials will be

supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for

Busbar to Drop out Fuse and Drop out fuse to

72 9926000100 Transformer H.T. without Busbar (12 mm sleeve) as Per TC

per technical specification. (All Materials will be

supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for

Busbar to Drop out Fuse and Drop out fuse to

73 9926000094 Transformer H.T. including Busbar(15 mm sleeve) as Per TC

per technical specification. (All Materials will be

supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for

Busbar to Drop out Fuse and Drop out fuse to

74 9926000101 Transformer H.T. without Busbar(15 mm sleeve) as per Per TC

technical specification. (All Materials will be supplied by

Supply & fixing of Disc type Red Color FRP(Non-

flammable) material with Weather resistant, Non-

75 9926000095 conductive bird guard OD=300 MM, ID=33 MM, Width NO

=1.25 MM, one side cut from ID to OD. (All Materials

will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e. Re-

useable boot (LT Side 1.1 kV) including LT (1.1 kV)

insulating taps. All live part at LT side shall be covered

with fixing of LT insulating taps.

77 Nylon Net around Transformer Center

77.1 9926000097 Nylon Net (12 * 15 ft) Per Net

77.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated

77.3 9926000099 material for fitting nylon net shall be provided by Per TC

-::- SCHEDULE – ‘B 2’: FOR MAINTENANCE -::-

Item Code Details of works Unit FY 2024-25

(A) LINE MAINTENANCE

1 9924000001 Cutting of Tree branches surounding HT/LT line

Replacement of old jumpers & providing new double

2 9924000002 jumpers with 8" binding [D Type] & capsuling with No.

3 9924000005 Support pole for Stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per pole

in costle area with cleaning .

6 9924000008 Pin binding of conductor LT shakel insulator No.

7 9924000009 Replacement of one/both disc.insulator at strain pole No.

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Refixing of V cross Arm No.

Replacement of V cross Arm (With Transportation &

11 9924000013 Refixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

Providing DO fuse on DP with carting &

jumpuring(ONE DO FUSE)

Numburing of pole with paint by preparing back

15 9924000017 ground of one colour and have lettering(height 3" * No.

width 0.5") using stensil

16 9924000018 Fixing of MMB(1PH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (1ph.) meter for Urban area No.

19 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with letter

size height 40mm* width 8mm)

painting consumer no. on MMB (Rural) (with letter

size height 40mm* width 8mm)

22 9924000024 Replacement of deteriorated Single phase Service line No.

Fixing of new dist. Box with complete wiring including

clamps,nut bolts etc.

Reparing of guarding involving reshaping of bearer

wire cross lacing binding etc.

Painting of steel fabricated material of RSJ DO DP

structure with paint

Painting of steel fabricated material of RSJ pole

mounted transformer double pole structure with paint

Painting of steel fabricated material of RSJ single pole

painting of steel fabricated material of PSC Single pole

(HT line) with paint

painting of steel fabricated material of PSC DO DP

double pole with paint

painting of steel fabricated material of PSC double

pole at pole mounted transformer with paint

31 9924000033 Providing line seperater single phase No.

32 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator along with

adjustment of tension in stay wire

Replacement of deteriorated /providing LT dist. Box

34 9924000036 with new up to 100KVA capacity & crediting it to No.

Replacement of deteriorated /providing LT dist. Box

35 9924000037 with new above 100KVA capacity & crediting it to No.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

Converting pin point to Shackle point including

38 9924000040 location

dismentaling & restringing etc.

replacement of 11KV Pin insulator with providing new

double pin binding

replacement of 22KV Pin insulator by new 11kv pin

40 9924000042 insulator with spares & providing new double pin No.

Providing 11kv double disc insulators with binding &

Replacement of existing 11kv conductor (all size) with Cond/K

new double pin binding M

43 9924000046 Plumbing of PSC Pole with straightening at pin point No.

Plumbing of PSC Pole with straightening at tension

Plumbing of tilted DP structure (PSC/RSJ/STP) with

refilling of stone Murrum etc.

Providing new 11kv AB /GO switch with fabrication and

insulated colour code jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with providing

new insulated jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line with per

using PVC reel insulators etc pole

Labour charges for replacement /providing of MMB &

service with all accessories for three phase connection

Labour charges for replacement /providing of MMB &

service with all accessories for single phase connection

Dismentalling of existing Dist.X'mer center(RSJ /STP

51 9924000055 POLE) 25/63/100/200 KVA with all fabrication & No.

creditig the old material to store

52 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from pole &

crediting to S/dn (1 ph.)

Dismentaling & removing of service line from pole &

crediting to S/dn (3 ph.)

Reconnection of service line complete with PVC cable

Reconnection of service line complete with PVC cable

Providing spiral type earthing by G.I. NO 8(weight 2kg

-5mtr in length) with salt and coal 10kg each,

including pvc rigid pipe 20mm dia( 1.5mtr length) to

pass exposed part of G.I. wire at consumer end with

all materials, earth resistance should be less than

Providing and fixing of signle core 1.5 sq mm single

strand copper insulated cable with cable nail clip for

spiral type earthing at consumer end. The end of G.I.

no 8 is to be connected by connector with copper

61 9924000070 cable of which other end shall be connected to the

earth terminal of meter box. This item shall be used in

location where there is more distance between earth

terminal and earthing terminal of meter. (All materials

supplied by contractor)

9924000065 Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM

including fitting of all accessories i.e. special design

suspension / tension clamp, fixing of cross arm, LT

shackle insulator etc. for fixing of messenger wire and

inclusive of dismantling charge of existing bare

62 conductor and crediting in to store & dismantling of KM 8922/-

service line from LT bare conductor and to provide

service connection on Aerial Bunch Cable by insulated

piercing connectors through service connection box

complete as required & directed by Engineer in

9924000066 Stringing of LT ABC of 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM including fitting of all accessories KM 22303/-

i.e. special design suspension / tension clamp, fixing of

cross arm, LT shackle insulator etc. for fixing of

messenger wire and inclusive of dismantling charge of

existing bare conductor and crediting in to store &

dismantling of service line from LT bare conductor and

to provide service connection on Aerial Bunch Cable by

insulated piercing connectors through service

connection box complete as required & directed by

Engineer in Charge.

9924000067 Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM

including fitting of all accessories i.e. special design

suspension / tension clamp, fixing of cross arm,

binding to pin insulator, preparing shackle point,

jumpers etc. and inclusive of dismantling charge of

existing bare conductor and crediting in to store

complete as required & directed by Engineer in

9924000068 Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM

including fitting of all accessories i.e. special design

suspension / tension clamp, fixing of cross arm,

65 binding to pin insulator, preparing shackle point, KM 55019/-

jumpers etc. and inclusive of dismantling charge of

existing bare conductor and crediting in to store

complete as required & directed by Engineer in Charge

9924000069 Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+

35 SQ MM including fitting of all accessories i.e. special

design suspension / tension clamp, fixing of cross arm,

LT shackle insulator etc. for fixing of messenger wire

and inclusive of dismantling charge of existing bare

66 conductor and crediting in to store & dismantling of KM 15613/-

service line from LT bare conductor and to provide

service connection on Aerial Bunch Cable by insulated

piercing connectors through service connection box

complete as required & directed by Engineer in

-::- SCHEDULE – ‘B 3’: FOR Underground -::-

LABOUR RATE FOR UNDERGROUND CABLE WORK (WITHOUT GST)

Item Code Description Unit FY 2024-25

Labour charge for excavation of cable

trench of 400mm width x 1200mm

depth, in any type of soil for laying of

cable of size up to 240 mm2 (For

additional cable 200 mm additional width

shall be considered i.e. half trench length

is to be considered)

Labour charge for excavation of cable

trench of 600mm width x 1200mm

depth, in any type of soil for laying of

2 9925000002 cable of size up to 240 mm2 (For Meter

additional cable 200 mm additional width

shall be considered i.e. half trench length

is to be considered)

Labour charge for excavation of cable

trench of 400mm width x 1500mm

depth, in any type of soil for laying of

3 9925000003 cable of size up to 240 mm2 (For Meter

additional cable 200 mm additional width

shall be considered i.e. half trench length

is to be considered)

Labour charge for laying of 11kV / 22 kV

XLPE Cable of size up to 240 mm2 &

preparation of sand layer 100mm thick, in

the cable trench & covering the cable with

150 mm dia (Inner), thickness

mm, 1.0 meter long RCC half round muffs

and providing and fixing of 4inch width

yellow colour polyethylene tape with

printing "CAUTION ELECTRIC CABLE

BELOW" at 0.75 m depth from ground

surface after laying cable in trench. This

will provide indication that electric cable is

passing underground so as to protect

cable from mechnical injuries, refilling the

same, as per Instruction of Engineer in

Labour charge for horizontal drilling

using Auger machine without damage

to surface road at max 2.0 mtrs depth &

putting of 6.11 kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984-

1987(3rd revision) and BIS certification

5 9925000005 and laying of 11KV/22KV XLPE cable of Meter

size up to 240 mm2 in HDPE pipe, as per

Site Condition (excluding cost of pipe).

The detail map obtained from HDD

machine and excell sheet(hard and soft

copy) indicating the respective depth and

distance from adjacent landmark for each

segment for HDD is must required to be

submitted. HDD to be carried out at depth

1.5 mtrs to 2.0 mtrs as per site conditions

and as per instruction of EIC.

Labour charge for horizontal drilling

manually without damage to surface

road at max 2.0 mtrs depth & putting of

6.11 kg/cm2 , class-4,Green color, 110mm

O.D. , 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984-1987(3rd revision)

and BIS certification and laying of

11KV/22KV XLPE cable of size up to

mm2 size, as per Site Condition

(excluding cost of pipe). The detail map

and excell sheet(hard and soft copy)

indicating the respective depth and

distance from adjacent landmark for each

segment of cable to be submitted. Drilling

to be carried out at depth Minimum

mtrs to 2.0 mtrs as per site conditions as

per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5 mm thickness

H.D.P.E. pipe confirms to IS 4984 and

BIS certification for laying of underground

11KV / 22KV XLPE cable up to 240 mm2

Labour work for RCC concreting on

disputed location and repairing of damage

portion of road crossing for the work

carried out for roads crossing as well as

concreting & muffing of ploes

including all materials (1:2:4)

Providing & fixing concrete stone route

marker of 300 mm width x 150 mm

thick x 650 mm height embedded in

earth at least 300 mm below & 350 mm

above ground level respectively at

distance approx 50 meters along the

length of cable. The RCC concreting

(1:2:4)(all necessary maeterials will be in

bidder's scope) of route marker is to be

carried out 300 mm width x 150 mm thick

x 300 mm below ground level as per

instruction of EIC. The route marker

should be with name of company with

approved yellow colour-DGVCL. The

distance from marker to cable and cable

depth with feeder name etc., marked with

arrow sign is to be painted on it.The route

marker is to be fixed at location near to

any fixed permanent location (not

necessary to fix exact on top of cable) as

per instruction of EIC.

Erection of D.P. (double pole)

structure using 9 / 11 Mtr. RSJ pole

with cable connection arrangement along

with fitting of necessary fabrication for

11KV cable including excavation of pit &

refilling of earth as per instruction of EIC.

(Exclusive of concreting & muffing of

Erection of Single pole structure using

9 / 11 Mtr RSJ pole with cable

connection arrangement along with fitting

ofnecessary fabrication for 11KV/22 KV

cable including excavation of pit & refilling

of earth as per instruction of EIC.

(Exclusive of concreting & muffing of

Erection of D.P. (double pole)

structure using 8.0 Mtr. PSC pole with

cable connection arrangement along with

fitting of necessary fabrication for 11KV

cable including excavation of pit & refilling

of earth as per instruction of EIC.

(Exclusive of concreting & muffing of

Erection of Single pole structure using

8.0 Mtr PSC pole with cable connection

arrangement along with fitting

ofnecessary fabrication for 11KV/22 KV

cable including excavation of pit & refilling

of earth as per instruction of EIC.

(Exclusive of concreting & muffing of

Labour charge for erecting of 11kV /

kV XLPE cable of size up to 240 mm2

on DP Structure with fixing of 02 Nos

polymer cleats on top and middle

part.Polymer cleats, nut bolts etc. fixing

material to be provided by contractor.

Providing & fixing of 6.11kg/cm2

15 9925000015 class-4,Green color, 110mm O.D. , Per Job

8.5mm thickness H.D.P.E. pipe

confirms to IS 4984 and BIS

certification on the erected DP

structure for the mechanical protection

of cable by inserting the cable inside

HDPE pipe. The HDPE pipe shall be

erected in such a way that 300mm shall

be below the ground level and the rest

2700 mm shall be supported on the

DP Structure with 01 No Polymer cleat.All

materials including polymer cleat and Nut

bolt to be provided by contractor.

Providing and fixing of pipe type

earthing from 80 mm dia class-B GI pipe

with pit to be filled with salt & coke and

construction of chamber as per DGVCL

16 9925000016 Drg. No. dg /100 for DP and cable. The No.

earthing pit should be joined with cable by

G.I. strip of size 1” width & 2 mm thick.

All material GI pipe, Coke, Salt etc will be

supplied by bidder.

Supply & fixing of heat shrink type

end terminations (outdoor) for upto

11kV 3C x 185 mm2 size XLPE cable as

per DGVCL technical specification

Supply & fixing of heat & shrinkable end

terminations (outdoor) for upto

kV 3C x 185 mm2 size XLPE cable as per

DGVCL technical specification)

Supply & fixing of heat shrink type end

terminations (indoor) for upto 11kV

3C x 185 mm2 size XLPE cable as per

DGVCL technical specification)

Supply & fixing of heat & shrinkable end

terminations (indoor) for upto 22 kV

3C x 185 mm2 size XLPE cable as per

DGVCL technical specification

Supply & fixing of heat shrinkable

straight through joint for upto 11kV

3C x 185 mm2 size XLPE cableas per

DGVCL technical specification.

Supply & fixing of heat shrinkable

straight through joint type for upto

22kV 3C x 185 mm2 size XLPE cable as

per DGVCL technical specification

Labour charge for excavation of 2100mm

long x 1200mm wide x 1200 mm deep

joint pits for installation of 11kV / 22kV

Straight through joints as per

instruction of engineer-in-charge &

covering the cable with 150 mm dia

(Outer), thickness 25 mm, 1.0 meter

long RCC half round muffs & refilling

same as per instruction of EIC .

Providing and fixing of insulating bus bar,

made from 11KV/22KV XLPE cable after

removal of semi conducting layer and

applying of PVC heat shrinkable anti-

tracking core insulating tubing (1.1KV), on

both end terminal using Aluminium long

barrel heavy duty up to 240 sq mm lugs,

24 9925000024 Aluminium bus connector. Taping with No.

PG- clamp for bus conductor as per

drawing and as per instruction of EIC. The

Alluminium lugs and PG clamp shall be

covered with 11KV/22KV HT insulating

tapes.(11KV/22KV XLPE cable will be in

scope of DGVCL while all other materials

will be in bidder's scope)

Testing of cable at various points and

commissioning the feeder as per

25 9925000025 instruction of engineer-in-charge.Test No.

result shall be submitted by contractor

Preparation and submission of 6 (six)

copies, of complete layout drawings

26 9925000026 with GIS mapping as per actual cable Set

routing showing road crossing, HDPE pipe

sleeving, jointing locations, markers etc.

Providing and fixing of Sign Board at

junction point Made out of 2 mm

aluminium sheet size 750x300 mm (2.5 x

1ft) rectangle, as per design, pre treated

with phosphate process and acid etching

coated with one coat of epoxy primer and

two coats of best quality paints,

refloctrorised with Hi-Intensity retro –

27 9925000027 reflective sheeting as per the latest and No.

frame fabricated from suitable size iron

angle. The Sign Board is to be fixed on

the base prepared from channel and

bracing angles which is grouted by means

of cement concreting of 1:2:4 for size of

300 mm dia x 800 mm height (500 mm to

be grouted in ground). The details to be

displayed on sign board will be given by

In-charge Engineer.(a) Hi intensity Micro

prismatic Grade

Providing and fixing of Sign Board

(Danger Board) on Distribution

Transformer Centers

Made out of 2mm aluminium sheet size

300x300mm (1x1ft) as per design, pre

treated with phosphate process and acid

etching coated with one coat of epoxy

28 9925000028 primer and two coats of best quality No.

paints, refloctrorised with Hi-Intensity

retro-reflective sheeting as per the latest

and frame fabricated from suitable size

iron angle. The Sign Board (Danger Board

is to be fixed at the location as per

instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size

250 mm (L) x 75 mm (W) from 3 mm

aluminium sheet along with 1.0 mm dia

aluminium binding wire for fixing of

aluminium tag near end termination joint

at DP structure for identifyng the cable.

The details of feeder i.e. 11 / 22 KV with

feeder name shound be punched on the

tag by letter punch of size 16 mm as per

instruction of In-charge Engineer.

Supply & fixing of heat shrink type end

terminations (outdoor) for 11kV 3C x

240 mm2 size XLPE cable as per DGVCL

technical specification

Supply & fixing of heat & shrinkable end

terminations (outdoor) for 22 kV 3C

x 240 mm2 size XLPE cable as per

DGVCL technical specification)

Supply & fixing of heat shrink type end

terminations (indoor) for 11kV 3C x

240 mm2 size XLPE cable as per DGVCL

technical specification)

Supply & fixing of heat & shrinkable end

terminations (indoor) for 22 kV 3C x

240 mm2 size XLPE cable as per DGVCL

technical specification

Supply & fixing of heat shrinkable

straight through joint for 11kV 3C x

240 mm2 size XLPE cableas per DGVCL

technical specification.

Supply & fixing of heat shrinkable

straight through joint type for 22kV

3C x 240 mm2 size XLPE cable as per

DGVCL technical specification

Installation, Testing and commissioning

of 11 KV,630 A SCADA Compatible, RRL

type- 3 Way RMU including Two

numbers of earthings as per Drawing

(material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning

of 11 KV,630 A SCADA Compatible, RRLL

type- 4 Way RMU including Two

numbers of earthings as per Drawing

(material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning

of 22KV,630 A SCADA Compatible, RRL

type-3 Way, RMU including Two

numbers of earthings as per Drawing

(material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning

of 22KV,630 A SCADA Compatible, RRLL

type-4 Way, RMU including Two

numbers of earthings as per Drawing

(material is in bidder's scope) and as per

DGVCL Technical specification.

Construction of plinth for 11KV, RRL

type- 3 Way (i.e Two numbers of

Isolator & One number of Breaker) Ring

40 9925000042 Main Unit as per DGVCL's technical No.

specification mentioned in drawing no:

Drg. 11kv-01. All required material will be

supplied by contractor.

Construction of plinth for 11KV, RRLL

type- 4 Way (i.e Two numbers of

Isolator & Two number of Breaker)Ring

41 9925000043 Main Unit as per DGVCL's technical No.

specification mentioned in drawing

no:Drg. 11kv-02.All required material will

be supplied by contractor.

Construction of plinth for 22KV, RRL

type- 3 Way (i.e Two numbers of

42 9925000044 Isolator & One number of Breaker) Ring No.

Main Unit as per DGVCL's technical

specification mentioned in drawing no:

Drg. 22kv-01. All required material will be

supplied by contractor.

Construction of plinth for 22KV, RRLL

type- 4 Way (i.e Two numbers of

Isolator & Two number of Breaker)Ring

43 9925000045 Main Unit as per DGVCL's technical No.

specification mentioned in drawing

no:Drg. 22kv-02.All required material will

be supplied by contractor.

Modifications e.g. Providing and fixing of

Terminal protectors i.e. Re-use able boot

(HT Side 11/22KV, LT Side 1.1KV)

including 11/22 KV insulating taps and

L.T.(1.1 KV) insulating taps ,Busbar,

Tapping from Bus Bar (11/22 KV XLPE

cable) through P.G. Clamp for H.T.

Jumper to D.O. Fuse to bushings of

Transformer Center, providing & Fixing of

jumper and providing & fixing of Heat

Shrinkable Anti Tracking Core Insulating

Tubing (Insulation Level 11/22 KV) in H.T.

jumper , Clamping arrangement of cable

support frame on both side of existing

Over Head type Distribution Transformer

to utilize in Under Ground cable network

as per drawing & as per instruction of

Engineer incharge. All live parts i.e. PG-

Clamp, connections of D.O.fuses, HT

bushings etc . shall be covered with

fixinng of 11/22 KV HT insulating tapes. (

11/22 KV XLPE cable will be in scope of

DGVCL while all other materials will be in

bidder's scope ) .

Laying of any size of 11/ 22 KV XLPE

45 9925000047 /PILC Cable in redaymade trench or in

Labour charges for Lying of O/H XLPE

cable pole to pole

Supply of 150 mm dia (Inner), thickness

47 9925000064 25 mm, 1.0 meter long RCC half round No.

Total of schedule B1, B2& B3

(+)_______%Above, (-)_______%Below, Rate to

(Rs.In Words… Fifty Lacs Only)

Net Total of Schedule ‘B1, B2& B3:

Amount in Words: (Fifty Lacs Only)

1. Whatever Steel Material removed after replacement should be credited to Store.

2. The rates are inclusive of PF & Work Contract Tax & excluding of GST.

3. Contractor has to carry out work under Bilimora Town Sub-Division under

Valsad-Rural Division.

4. DGVCL will provide 1ph & 3ph LT Ariel Bunch Cable 11/22kv HT ABC with necessary

accessories to the contractor.

5. The rates are inclusive of dismantling charges of existing bare conductor and

crediting in to store & dismantling of service lines from LT bare conductor and to

provide service connections on ABC by insulated pierce connectors through service

connection box.

6. The contractor has to collect all the required materials from DGVCL store as well as

credit the dismantle material to the DGVCL store at their cost.

1. DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to the contractor.

2. All fabricated items shall be fabricated as per DGVCL approved drawing and by welding

rods confirming to the relevent ISI specification and as directed by Engineer in charge.

3. Necessary electricity connection for fabrictated items shall be provided by DGVCL on

payment of required charge for connection & electricity bill of the same shall be paid by the

4. All the rates are inclusive of PF and Exclusive of GST applicable time to time.

5. All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles &

steel fabricated materials of RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the

RSJ poles & steel fabricated materials of RSJ/PSC poles.

Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver paint)

is to be properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

Executive Engineer (O&M)

Valsad Rural Division.