AME for miscellaneous works for wiring light points, replacement of damaged UG cables etc, in AE-Elec-Filter House section in ESD-East,Tirumala for the year 2026-27(Part-A)

Supply and Fixing of ISI Mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and Fixing of ISI mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in new / existing brick building, walls, columns, beams duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Mini Modular Switch Makes: Anchor / Gold Medal / Hvells / ABB / Indo Asian / GM / HPL

Supply and wiring with 3 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI /Mini Modular Switch Makes: Anchor / Gold Medal / Havells / ABB / Indo Asian / GM / HPL

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 2 plate Jumbo ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five

Supply and wiring with 3 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 3 plate pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 5 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 16 / 6 Amps 1 Way Combined 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 Amps 1 way Mini Modular Switch with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 6 Amps 3 / 2 pin Mini Modular Socket with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 16 Amps Mini Modular Switch with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 16 Amps (2 in one) Mini Modular Switch & Socket combined with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of Mini Modular Stepped type Electronic Regulator with cover frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 3 mm thick laminated sheet of I.S.I Mark white or approved colour to be fixed with brass screws, cup washers on the existing T.W. Board duly removing the existing damaged Hylum sheet as directed during execution.

Supply and fixing of 4 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 8 or 9 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 12 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 4 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 8 Modular Horizontal / Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 12 Modular Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and Fixing 19/20mm dia MS tubular fan down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete

Supply and fixing of Remote Bell on the existing switch board and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Rawal fan hook in the ceiling and repacking the same with M.Seal for ceiling fans etc., complete.

Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Fixing of given (9" to 24") Exhaust fan on to the existing hole and giving necessary connections complete.

Fixing of given 25 Ltrs to 50 Ltrs Storage type water heater with 2 Nos. of Nylon / PVC / Metallic hose pipe etc., on wall with 4 Nos. of 3/8" x 4" bolts, nut & washers with cement packing including connections etc., complete.

Supply and fixing of 4 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 8 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 12way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 4 Way TP & N Horizontal type Distribution board as per IS 8623; IS 13032; IEC 61439-3. with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

supply and fixing of 40 to 63 Amp TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 63 Amp FP Isolator as per IEC:60947 Part-III in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of universal mounting metal plug board and socket suitable for D.P. RCCBs including labour charges for surface mounting. Grade-A: Makes: Legrand (ekinox3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of RCCB Up to 40A Double Pole, 30mA for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 63A Four Pole, 100mA RCCB for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of sheet steel enclosure with IP 20 Protection as per IS 8623; IS 13032; IEC 61439-3 suitable for DP/TP/FP MCBs firmly Concealed in the wall with neat plastering etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply of 48"/56" (1200mm/1400mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with Regulator Makes: Atomberg/ Halonix/Havells/ Crompton

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 25 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 50 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 120 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Laying of U.G cables size from 70 Sq.mm to 150 sq.mm and back filling of trench including labour charges etc., complete.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 25 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 50 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 120 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc upto 16 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 25 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 50 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 120 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with suitable 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 25 Sq.mm to 50 Sq.mm on walls etc., including all labour charges etc., complete.

Only erection of 9 Meters length of given Steel Tubular Pole in an earth pit of size 2' x 2' x 6' and concreting in C.C. 1:3:6 with 40mm HBG Crushed metal to full width over bed concrete to a height of 5' (up to ground level) in all soils and filled with sand to a height of 6" and base concreting with C.C (1:3:6) using 40mm HBG Crushed Metal for full width and up to ground level over concrete bed of 6" height and coping should be done to a height of 2 1/2' with round/square/hexagonal shape using 20mm HBG Crushed metal in C.C. (1:3:6) and plastering neatly with 12mm thick in C.M (1:5). The Pole has to be painted with 2 coats of enamel paint from coping to a height of 1.00 mtr and painting the remaining pole with 2 coats of Aluminum paint over one coat of red oxide paint as directed during execution. (Poles will be supplied departmentally and conveyance by the Contractor at his cost from Stores to Site).

Providing of Independent Earthing with 40mm Dia GI Pipe 'B' class of 2.5 Mtrs length after excavating an earth pit of size1.5 m X 0.9 m X 2.55 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.65 m) with the following specification: (a) the GI pipe shall be inserted into the Ground for 2.25 M below the inspection chamber bottom 300 mm all around This pipe shall be covered with the mixture of 40 Kgs of coke, 20 Kgs of salt & sand including necessary earth work excavation in all kind of soils. (b) the excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water.

(c) the top 0.25 m of GI pipe shall be exposed into inspection chamber of 0.40 X 0.40 X 0.40 m internal size . The all around inspection chamber shall be providied with 0.1 m thick CC (1:2.5:5) walls with 20 mm thick HBG metal such that the pit shall be exposed 100 mm above ground level. The bottom of the inspection chamber shall be provided with 100 mm thick CC (1:2.5:5) using 20 mm HBG metal with 200 mm outer offset at all four sides. (d) All the inside & outside exposed faces of the inspection chamber shall be plastered with CM (1:3) 12 mm thick. (e) A 65 mm dia PVC conduit is to be embeded through 100 mm thick wall at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound.

(f) The top of the 40 mm dia GI pipe shall be welded with reducer of 20mm dia connected with 20mm dia of 0.3 long GI pipe and 20 mm GI pipe is to be fixed with funnel & wire mesh. (g) After giving earth connections to the 25 X 6 mm GI flat with bolts, nuts & washers, a pre-casted RCC (1:2:4) slab cover of 40 mm thick with lifting hook is to provided on top of the Earth pit. (h) Necessary Meggar testing is to bo done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Providing earthing as per IS 3043/ 1987 with 100mm (ID), 13mm thick C.I. Pipe of 3.0 mtr. length after excavating an earth pit of size1.5 m X 0.9 M X 3.00M(Top 1.50 m X 1.20 m X 0.9m & bottom 1.20 M X 1.20 M X 1.65 M) and filling with a homogenous layer of 40 Kgs. of Coke / Char Coal, 20 Kgs. of Salt and the required quantity of sand around 100mm pipe from the bottom of the pipe to a height of 2.7mtr. and filling the remaining excavated portion with earth and consolidation / Settlement of the trench should be done by filling with sufficient quantity of water. A concrete bed of size 0.8 M X 0.8 M X 0.1 M thick and an inspection chamber having inside measurements of 0.4 M X0.4 M X 0.4 M with wall thickness of 100 mm with cement concrete CC (1:2.5:5) using 20 mm HBG Metal is to be constructed with side wall 100 mm above ground level and plastering the exposed walls neatly with CM (1:3) with 12 mm thick.

The Top of the Inspection Chamber is to be provided with reinforced precasted RCC Slab with 40mm thick with lifting hook. The top of C.I. Pipe is to be fixed & welded with suitable G.I. Wire mesh funnel 50mm x 6mm G.I. Strip having length of 300mm is to be fixed to the top of C.I. Pipe with G.I. Clamps fabricated with 50 x 3mm G.I. Flats with necessary bolts and nuts and necessary welding to be done to the clamps and C.I. Pipe. 2 Nos. of holes are to be drilled on either side of G.I. Flat for Extending earth connections. 65mm dia PVC Pipe is to be embedded at the pit entry for earth. After laying earth from earth conductor bus to Electrode trough PVC Pipe, the surface should be covered with bitumen and grease. The cost of GI/Copper flat to be run from CI Pipe electrode to the equipment is to be made separately on running meter basis. The work shall be executed strictly as per IS 3043 - 1987. The rate includes cost and conveyance of all materials, labour charges, incidental charges etc., complete (Note:- Necessary meggaring testing is to be carried out in the presence of concerned Engineers and measurement of resistance shall be as per ISI standards)

Supply and run of ' 25mm X 3mm G.I Strip for earth electrode to required places by Surface in walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Supply and run of 50mm X 6mm G.I Strip for earth electrode to required places on Surface of walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Painting to the existing 7.5 mtrs height with Single/ double stem steel tubular poles / pipes of street lights / Road light / Yard lights including stems, MS boxes / cross arms / GI pipes clamps to the pole with one coat of enamel paint of approved colour from coping to a height of 1 Mtr and single/ double stem pipe of approved colour and painting the remaining pole with one coat of aluminium paint & painting one coat of AcrylicExterior Emulsion paint to the pole coping as directed during execution. Necessary ladder / scaffolding arrangement is to be made by contractor at his cost. (If departmental ladder is used an amount of Rs.25-00 / pole will be deducted from the contractor bill subject to without causing any damage to the ladder). Make : As approved in Civil SSR-2020-21

Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex

Supply and fixing of fabricated M.S clamps /Angles /Channels made out of various sizes of (25mm x 3mm, 25mm x 6mm etc.) MS flat with necessary holes on either side with suitable painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of cable trays on Angular stands/ channels structures etc., including all labour charges etc., complete

Dismantling of the existing Geysers / Refrigerators / water coolers completely with accessories without causing any damage to the fixtures etc., (Note: The dismantled above materials are to be returned to concerned section officer by the contractor at his cost)

Supply and Making heat shrinkable type straight through terminations / joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends, testing etc., as required of 3 core 120 / 150 / 185 Sq.mm sizes. Make: Raychem / M seal / Denson / Multy / Transeal- Hongshang

Supply and fixing of 2 Module Plastic surface box with Modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete Make: Legrand Arteor/ Legrand Mosaic/ North West/ M.K./GM/L&T.

Supply and fixing of 12 Module Plastic surface box with Modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete Make: Legrand Arteor/ Legrand Mosaic/ North West/ M.K./GM/L&T.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

Supply and Fixing of ISI Mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and Fixing of ISI mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in new / existing brick building, walls, columns, beams duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Mini Modular Switch Makes: Anchor / Gold Medal / Hvells / ABB / Indo Asian / GM / HPL

Supply and wiring with 3 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI /Mini Modular Switch Makes: Anchor / Gold Medal / Havells / ABB / Indo Asian / GM / HPL

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 2 plate Jumbo ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five

Supply and wiring with 3 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 3 plate pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 5 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 16 / 6 Amps 1 Way Combined 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 Amps 1 way Mini Modular Switch with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 6 Amps 3 / 2 pin Mini Modular Socket with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 16 Amps Mini Modular Switch with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 16 Amps (2 in one) Mini Modular Switch & Socket combined with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of Mini Modular Stepped type Electronic Regulator with cover frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 3 mm thick laminated sheet of I.S.I Mark white or approved colour to be fixed with brass screws, cup washers on the existing T.W. Board duly removing the existing damaged Hylum sheet as directed during execution.

Supply and fixing of 4 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 8 or 9 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 12 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 4 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 8 Modular Horizontal / Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 12 Modular Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and Fixing 19/20mm dia MS tubular fan down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete

Supply and fixing of Remote Bell on the existing switch board and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Rawal fan hook in the ceiling and repacking the same with M.Seal for ceiling fans etc., complete.

Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Fixing of given (9" to 24") Exhaust fan on to the existing hole and giving necessary connections complete.

Fixing of given 25 Ltrs to 50 Ltrs Storage type water heater with 2 Nos. of Nylon / PVC / Metallic hose pipe etc., on wall with 4 Nos. of 3/8" x 4" bolts, nut & washers with cement packing including connections etc., complete.

Supply and fixing of 4 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 8 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 12way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 4 Way TP & N Horizontal type Distribution board as per IS 8623; IS 13032; IEC 61439-3. with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

supply and fixing of 40 to 63 Amp TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 63 Amp FP Isolator as per IEC:60947 Part-III in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of universal mounting metal plug board and socket suitable for D.P. RCCBs including labour charges for surface mounting. Grade-A: Makes: Legrand (ekinox3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of RCCB Up to 40A Double Pole, 30mA for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 63A Four Pole, 100mA RCCB for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of sheet steel enclosure with IP 20 Protection as per IS 8623; IS 13032; IEC 61439-3 suitable for DP/TP/FP MCBs firmly Concealed in the wall with neat plastering etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply of 48"/56" (1200mm/1400mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with Regulator Makes: Atomberg/ Halonix/Havells/ Crompton

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 25 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 50 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 120 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Laying of U.G cables size from 70 Sq.mm to 150 sq.mm and back filling of trench including labour charges etc., complete.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 25 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 50 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 120 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc upto 16 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 25 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 50 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 120 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with suitable 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 25 Sq.mm to 50 Sq.mm on walls etc., including all labour charges etc., complete.

Only erection of 9 Meters length of given Steel Tubular Pole in an earth pit of size 2' x 2' x 6' and concreting in C.C. 1:3:6 with 40mm HBG Crushed metal to full width over bed concrete to a height of 5' (up to ground level) in all soils and filled with sand to a height of 6" and base concreting with C.C (1:3:6) using 40mm HBG Crushed Metal for full width and up to ground level over concrete bed of 6" height and coping should be done to a height of 2 1/2' with round/square/hexagonal shape using 20mm HBG Crushed metal in C.C. (1:3:6) and plastering neatly with 12mm thick in C.M (1:5). The Pole has to be painted with 2 coats of enamel paint from coping to a height of 1.00 mtr and painting the remaining pole with 2 coats of Aluminum paint over one coat of red oxide paint as directed during execution. (Poles will be supplied departmentally and conveyance by the Contractor at his cost from Stores to Site).

Providing of Independent Earthing with 40mm Dia GI Pipe 'B' class of 2.5 Mtrs length after excavating an earth pit of size1.5 m X 0.9 m X 2.55 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.65 m) with the following specification: (a) the GI pipe shall be inserted into the Ground for 2.25 M below the inspection chamber bottom 300 mm all around This pipe shall be covered with the mixture of 40 Kgs of coke, 20 Kgs of salt & sand including necessary earth work excavation in all kind of soils. (b) the excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water.

(c) the top 0.25 m of GI pipe shall be exposed into inspection chamber of 0.40 X 0.40 X 0.40 m internal size . The all around inspection chamber shall be providied with 0.1 m thick CC (1:2.5:5) walls with 20 mm thick HBG metal such that the pit shall be exposed 100 mm above ground level. The bottom of the inspection chamber shall be provided with 100 mm thick CC (1:2.5:5) using 20 mm HBG metal with 200 mm outer offset at all four sides. (d) All the inside & outside exposed faces of the inspection chamber shall be plastered with CM (1:3) 12 mm thick. (e) A 65 mm dia PVC conduit is to be embeded through 100 mm thick wall at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound.

(f) The top of the 40 mm dia GI pipe shall be welded with reducer of 20mm dia connected with 20mm dia of 0.3 long GI pipe and 20 mm GI pipe is to be fixed with funnel & wire mesh. (g) After giving earth connections to the 25 X 6 mm GI flat with bolts, nuts & washers, a pre-casted RCC (1:2:4) slab cover of 40 mm thick with lifting hook is to provided on top of the Earth pit. (h) Necessary Meggar testing is to bo done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Providing earthing as per IS 3043/ 1987 with 100mm (ID), 13mm thick C.I. Pipe of 3.0 mtr. length after excavating an earth pit of size1.5 m X 0.9 M X 3.00M(Top 1.50 m X 1.20 m X 0.9m & bottom 1.20 M X 1.20 M X 1.65 M) and filling with a homogenous layer of 40 Kgs. of Coke / Char Coal, 20 Kgs. of Salt and the required quantity of sand around 100mm pipe from the bottom of the pipe to a height of 2.7mtr. and filling the remaining excavated portion with earth and consolidation / Settlement of the trench should be done by filling with sufficient quantity of water. A concrete bed of size 0.8 M X 0.8 M X 0.1 M thick and an inspection chamber having inside measurements of 0.4 M X0.4 M X 0.4 M with wall thickness of 100 mm with cement concrete CC (1:2.5:5) using 20 mm HBG Metal is to be constructed with side wall 100 mm above ground level and plastering the exposed walls neatly with CM (1:3) with 12 mm thick.

The Top of the Inspection Chamber is to be provided with reinforced precasted RCC Slab with 40mm thick with lifting hook. The top of C.I. Pipe is to be fixed & welded with suitable G.I. Wire mesh funnel 50mm x 6mm G.I. Strip having length of 300mm is to be fixed to the top of C.I. Pipe with G.I. Clamps fabricated with 50 x 3mm G.I. Flats with necessary bolts and nuts and necessary welding to be done to the clamps and C.I. Pipe. 2 Nos. of holes are to be drilled on either side of G.I. Flat for Extending earth connections. 65mm dia PVC Pipe is to be embedded at the pit entry for earth. After laying earth from earth conductor bus to Electrode trough PVC Pipe, the surface should be covered with bitumen and grease. The cost of GI/Copper flat to be run from CI Pipe electrode to the equipment is to be made separately on running meter basis. The work shall be executed strictly as per IS 3043 - 1987. The rate includes cost and conveyance of all materials, labour charges, incidental charges etc., complete (Note:- Necessary meggaring testing is to be carried out in the presence of concerned Engineers and measurement of resistance shall be as per ISI standards)

Supply and run of ' 25mm X 3mm G.I Strip for earth electrode to required places by Surface in walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Supply and run of 50mm X 6mm G.I Strip for earth electrode to required places on Surface of walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Painting to the existing 7.5 mtrs height with Single/ double stem steel tubular poles / pipes of street lights / Road light / Yard lights including stems, MS boxes / cross arms / GI pipes clamps to the pole with one coat of enamel paint of approved colour from coping to a height of 1 Mtr and single/ double stem pipe of approved colour and painting the remaining pole with one coat of aluminium paint & painting one coat of AcrylicExterior Emulsion paint to the pole coping as directed during execution. Necessary ladder / scaffolding arrangement is to be made by contractor at his cost. (If departmental ladder is used an amount of Rs.25-00 / pole will be deducted from the contractor bill subject to without causing any damage to the ladder). Make : As approved in Civil SSR-2020-21

Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex

Supply and fixing of fabricated M.S clamps /Angles /Channels made out of various sizes of (25mm x 3mm, 25mm x 6mm etc.) MS flat with necessary holes on either side with suitable painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of cable trays on Angular stands/ channels structures etc., including all labour charges etc., complete

Dismantling of the existing Geysers / Refrigerators / water coolers completely with accessories without causing any damage to the fixtures etc., (Note: The dismantled above materials are to be returned to concerned section officer by the contractor at his cost)

Supply and Making heat shrinkable type straight through terminations / joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends, testing etc., as required of 3 core 120 / 150 / 185 Sq.mm sizes. Make: Raychem / M seal / Denson / Multy / Transeal- Hongshang

Supply and fixing of 2 Module Plastic surface box with Modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete Make: Legrand Arteor/ Legrand Mosaic/ North West/ M.K./GM/L&T.

Supply and fixing of 12 Module Plastic surface box with Modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete Make: Legrand Arteor/ Legrand Mosaic/ North West/ M.K./GM/L&T.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

(Rupees Two lakhs seventy eight thousands twp hundred sixteen and paise twenty nine only)

Supply and Fixing of ISI Mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and Fixing of ISI mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in new / existing brick building, walls, columns, beams duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Mini Modular Switch Makes: Anchor / Gold Medal / Hvells / ABB / Indo Asian / GM / HPL

Supply and wiring with 3 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI /Mini Modular Switch Makes: Anchor / Gold Medal / Havells / ABB / Indo Asian / GM / HPL

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 2 plate Jumbo ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five

Supply and wiring with 3 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 3 plate pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 5 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 16 / 6 Amps 1 Way Combined 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 Amps 1 way Mini Modular Switch with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 6 Amps 3 / 2 pin Mini Modular Socket with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 16 Amps Mini Modular Switch with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 16 Amps (2 in one) Mini Modular Switch & Socket combined with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of Mini Modular Stepped type Electronic Regulator with cover frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor / Gold Medal / Havells / ABB / Indoasian / GM / HPL.

Supply and fixing of 3 mm thick laminated sheet of I.S.I Mark white or approved colour to be fixed with brass screws, cup washers on the existing T.W. Board duly removing the existing damaged Hylum sheet as directed during execution.

Supply and fixing of 4 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 8 or 9 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 12 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 4 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 8 Modular Horizontal / Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 12 Modular Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and Fixing 19/20mm dia MS tubular fan down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete

Supply and fixing of Remote Bell on the existing switch board and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Rawal fan hook in the ceiling and repacking the same with M.Seal for ceiling fans etc., complete.

Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Fixing of given (9" to 24") Exhaust fan on to the existing hole and giving necessary connections complete.

Fixing of given 25 Ltrs to 50 Ltrs Storage type water heater with 2 Nos. of Nylon / PVC / Metallic hose pipe etc., on wall with 4 Nos. of 3/8" x 4" bolts, nut & washers with cement packing including connections etc., complete.

Supply and fixing of 4 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 8 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 12way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 4 Way TP & N Horizontal type Distribution board as per IS 8623; IS 13032; IEC 61439-3. with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

supply and fixing of 40 to 63 Amp TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 63 Amp FP Isolator as per IEC:60947 Part-III in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of universal mounting metal plug board and socket suitable for D.P. RCCBs including labour charges for surface mounting. Grade-A: Makes: Legrand (ekinox3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of RCCB Up to 40A Double Pole, 30mA for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 63A Four Pole, 100mA RCCB for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of sheet steel enclosure with IP 20 Protection as per IS 8623; IS 13032; IEC 61439-3 suitable for DP/TP/FP MCBs firmly Concealed in the wall with neat plastering etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply of 48"/56" (1200mm/1400mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with Regulator Makes: Atomberg/ Halonix/Havells/ Crompton

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 25 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 50 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 120 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Laying of U.G cables size from 70 Sq.mm to 150 sq.mm and back filling of trench including labour charges etc., complete.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 25 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 50 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 120 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc upto 16 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 25 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 50 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 120 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with suitable 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 25 Sq.mm to 50 Sq.mm on walls etc., including all labour charges etc., complete.

Only erection of 9 Meters length of given Steel Tubular Pole in an earth pit of size 2' x 2' x 6' and concreting in C.C. 1:3:6 with 40mm HBG Crushed metal to full width over bed concrete to a height of 5' (up to ground level) in all soils and filled with sand to a height of 6" and base concreting with C.C (1:3:6) using 40mm HBG Crushed Metal for full width and up to ground level over concrete bed of 6" height and coping should be done to a height of 2 1/2' with round/square/hexagonal shape using 20mm HBG Crushed metal in C.C. (1:3:6) and plastering neatly with 12mm thick in C.M (1:5). The Pole has to be painted with 2 coats of enamel paint from coping to a height of 1.00 mtr and painting the remaining pole with 2 coats of Aluminum paint over one coat of red oxide paint as directed during execution. (Poles will be supplied departmentally and conveyance by the Contractor at his cost from Stores to Site).

Providing of Independent Earthing with 40mm Dia GI Pipe 'B' class of 2.5 Mtrs length after excavating an earth pit of size1.5 m X 0.9 m X 2.55 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.65 m) with the following specification: (a) the GI pipe shall be inserted into the Ground for 2.25 M below the inspection chamber bottom 300 mm all around This pipe shall be covered with the mixture of 40 Kgs of coke, 20 Kgs of salt & sand including necessary earth work excavation in all kind of soils. (b) the excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water.

(c) the top 0.25 m of GI pipe shall be exposed into inspection chamber of 0.40 X 0.40 X 0.40 m internal size . The all around inspection chamber shall be providied with 0.1 m thick CC (1:2.5:5) walls with 20 mm thick HBG metal such that the pit shall be exposed 100 mm above ground level. The bottom of the inspection chamber shall be provided with 100 mm thick CC (1:2.5:5) using 20 mm HBG metal with 200 mm outer offset at all four sides. (d) All the inside & outside exposed faces of the inspection chamber shall be plastered with CM (1:3) 12 mm thick. (e) A 65 mm dia PVC conduit is to be embeded through 100 mm thick wall at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound.

(f) The top of the 40 mm dia GI pipe shall be welded with reducer of 20mm dia connected with 20mm dia of 0.3 long GI pipe and 20 mm GI pipe is to be fixed with funnel & wire mesh. (g) After giving earth connections to the 25 X 6 mm GI flat with bolts, nuts & washers, a pre-casted RCC (1:2:4) slab cover of 40 mm thick with lifting hook is to provided on top of the Earth pit. (h) Necessary Meggar testing is to bo done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Providing earthing as per IS 3043/ 1987 with 100mm (ID), 13mm thick C.I. Pipe of 3.0 mtr. length after excavating an earth pit of size1.5 m X 0.9 M X 3.00M(Top 1.50 m X 1.20 m X 0.9m & bottom 1.20 M X 1.20 M X 1.65 M) and filling with a homogenous layer of 40 Kgs. of Coke / Char Coal, 20 Kgs. of Salt and the required quantity of sand around 100mm pipe from the bottom of the pipe to a height of 2.7mtr. and filling the remaining excavated portion with earth and consolidation / Settlement of the trench should be done by filling with sufficient quantity of water. A concrete bed of size 0.8 M X 0.8 M X 0.1 M thick and an inspection chamber having inside measurements of 0.4 M X0.4 M X 0.4 M with wall thickness of 100 mm with cement concrete CC (1:2.5:5) using 20 mm HBG Metal is to be constructed with side wall 100 mm above ground level and plastering the exposed walls neatly with CM (1:3) with 12 mm thick.

The Top of the Inspection Chamber is to be provided with reinforced precasted RCC Slab with 40mm thick with lifting hook. The top of C.I. Pipe is to be fixed & welded with suitable G.I. Wire mesh funnel 50mm x 6mm G.I. Strip having length of 300mm is to be fixed to the top of C.I. Pipe with G.I. Clamps fabricated with 50 x 3mm G.I. Flats with necessary bolts and nuts and necessary welding to be done to the clamps and C.I. Pipe. 2 Nos. of holes are to be drilled on either side of G.I. Flat for Extending earth connections. 65mm dia PVC Pipe is to be embedded at the pit entry for earth. After laying earth from earth conductor bus to Electrode trough PVC Pipe, the surface should be covered with bitumen and grease. The cost of GI/Copper flat to be run from CI Pipe electrode to the equipment is to be made separately on running meter basis. The work shall be executed strictly as per IS 3043 - 1987. The rate includes cost and conveyance of all materials, labour charges, incidental charges etc., complete (Note:- Necessary meggaring testing is to be carried out in the presence of concerned Engineers and measurement of resistance shall be as per ISI standards)

Supply and run of ' 25mm X 3mm G.I Strip for earth electrode to required places by Surface in walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Supply and run of 50mm X 6mm G.I Strip for earth electrode to required places on Surface of walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Painting to the existing 7.5 mtrs height with Single/ double stem steel tubular poles / pipes of street lights / Road light / Yard lights including stems, MS boxes / cross arms / GI pipes clamps to the pole with one coat of enamel paint of approved colour from coping to a height of 1 Mtr and single/ double stem pipe of approved colour and painting the remaining pole with one coat of aluminium paint & painting one coat of AcrylicExterior Emulsion paint to the pole coping as directed during execution. Necessary ladder / scaffolding arrangement is to be made by contractor at his cost. (If departmental ladder is used an amount of Rs.25-00 / pole will be deducted from the contractor bill subject to without causing any damage to the ladder). Make : As approved in Civil SSR-2020-21

Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex

Supply and fixing of fabricated M.S clamps /Angles /Channels made out of various sizes of (25mm x 3mm, 25mm x 6mm etc.) MS flat with necessary holes on either side with suitable painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of cable trays on Angular stands/ channels structures etc., including all labour charges etc., complete

Dismantling of the existing Geysers / Refrigerators / water coolers completely with accessories without causing any damage to the fixtures etc., (Note: The dismantled above materials are to be returned to concerned section officer by the contractor at his cost)

Supply and Making heat shrinkable type straight through terminations / joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends, testing etc., as required of 3 core 120 / 150 / 185 Sq.mm sizes. Make: Raychem / M seal / Denson / Multy / Transeal- Hongshang

Supply and fixing of 2 Module Plastic surface box with Modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete Make: Legrand Arteor/ Legrand Mosaic/ North West/ M.K./GM/L&T.

Supply and fixing of 12 Module Plastic surface box with Modular cover plate with frame on to the wall with all required accessories and all labour charges etc., complete Make: Legrand Arteor/ Legrand Mosaic/ North West/ M.K./GM/L&T.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

(Rupees Two lakhs seventy eight thousands twp hundred sixteen and paise twenty nine only)