Construction of 11KV/LT line releasing NSC for Bandangd Bhaundanda and Jhimar Pumping Scheme (different Stages) under Jal Jeewan Mission under EDD, Bhikiyasain

Amount

CENTRALIZED ITEM

STP 8.5 M-IS 410 SP-23 (Bottom Portion hot dip Galvanized)

STP 8.5 M-IS 410 SP-21 (Bottom Portion hot dip Galvanized)

LT PVC Cable 4x16 Sq.mm

ACSR Rabbit

ACSR Weasel

11 KV Polymer Disc Insulator (B&S) Type

Disc Fitting B&S weasel/Rabbit 45 KN

11 KV Polymer Pin Insulator with Pin

Stay Set GI 16x1800 mm

Stay Wire GI 7/3.15mm 7/10 SWG

MS Channel 100x50 mm

Earthing Rod MS 20x2500 mm

Cable AL 3x70 Sq.mm XLPE 11 KV

Earth Wire GI 7/1.6 mm 16 SWG

9 KV 10 KA Light Arrester

MS Angle 50x50x6mm

LT XLPE Cable 1x70 Sq.mm

11 KV Pilfer Resistant Metering Cubical

Jointing kit for 3x70 Sq.mm 11 KV XLPE Cable (I/D)

Jointing kit for 3x70 Sq.mm 11 KV XLPE Cable (O/D)

11 KV VCB FDR 350/500 MVA 400/200/5A 110V AC

NON CENTRILIZED ITEM

PP&Clamp with N&B ST Pole SP-23 (MS Flat 50x6mm)

Stay Clamp with N&B ST Pole SP-23 (MS Flat 50x6mm)

Earth wire Clamp with N&B ST Pole SP-23 (MS Flat 50x6mm)

Shackle Insulator 100x115 mm with N&B

LT Clamp with N&B ST Pole SP-21 (MS flat 50x6mm)

Stay Clamp with N&B ST Pole SP-21 (MS Flat 50x6mm)

Bracing Clamp Top with N&B ST Pole SP-23 (MS Flat 50x6mm)

Bracing Clamp Bottom with N&B ST Pole SP-23 (MS Flat 50x6mm)

LABOUR CHARGE

Motarable cartage of Material from ESC Almora/Masi to road side dump store Including Loading & Un-loading both End.

Cartage of 16/25 KVA DTR 71-100 Km

Head load cartage of following materials from Dump store to pit site.

Head load Cartage of 25 KVA DTR (1-3Km)

Head load Cartage of 25 KVA DTR (0-1Km)

Head load Cartage SP-21/23 Pole (0-1 Km)

Head load Cartage SP-23 Pole (1-3 Km)

Head load Cartage of material

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ration 1:4:8(1cement:4graded stone 20mm nominal size 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leaveling as per RESSPO construction Manual.

Grouting of stay in size 0.6x0.6x0.3 in CC ration 1:4:8 (1 cement : 4 graded stone 20mm nominal size 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leaveling as per RESSPO construction Manual.

Muffing of poles size 0.45x0.60x cm radious with cc 1:3:6 (1 Cement: 3 Coarse sand : 6 graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.

Laying spreading stringing and sagging of 11 KV/33 KV line in 3 phase (3phase 4 wire) of the Rabbit conductor in HT line wire as phase wire with GI earth wire complete including fixing of all accessories in 3 nos conductor in parallel with binding and jumpering as per profile and sagging chart.

Erection of SP 21 Single pole in proper level and alignment along with fixing of all accessories as per RESSPO construction manual.

Erection of SP 23 Single pole in proper level and alignment along with fixing of all accessories as per RESSPO construction manual.

Erection of SP 23 Double pole in proper level and alignment along with fixing of all accessories as per RESSPO construction manual.

Erection of SP 23 Four pole in proper level and alignment along with fixing of all accessories as per RESSPO construction manual.

Fixing, tightening and nozzaling of stay with pole and stay rod on required tension as per drawing/RESSPO manual.LT stay set

Fixing, tightening and nozzaling of stay with pole and stay rod on required tension as per drawing/RESSPO manual.of 11 KV stay set

Laying spreading stringing and sagging of LT line in 3 phase (3phase 4 wire) of the Rabbit conductor as phase wire with GI earth wire complete with binding and jumpering as per profile and sagging chart.

Inst. Of 25 KVA DTR on pole structure.

Inst. Of 25 KVA DTR on plinth

Fabrication of MS channel angle iron after culting in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESSPO schedule and local approved drawing.

Earthing of support with MS Earth rod of 2.5 meter long by hammaring of MS road to proper depth and connecting the earth electrode with the help of G.I. wire as per RESSPO construction manual.

Fixing of 11 KV XLPE jointing kit

Laying of U/G 11 KV Cable (Trenchless)

Installation of HT PRMC

Route clearance by cutting of tree branches/proning, loping and chopping of trees for LT & HT line.

HARIOM CONSTRUCTION