C/O Govt. Arya Degree College at Nurpur in Tehsil Nurpur Distt. Kangra HP

Amount

Excavation in foundation, trenches etcetera in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work . jumper blasting work , soft and hard blasting and doing work in saturated soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation as directed by the Engineer-in-charge and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by Engineer in charge within all leads and lifts disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts and other incidental charges

Excavation in foundation, trenches etcetera in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work . jumper blasting work , soft and hard blasting and doing work in saturated soil conditions unto any depth and lift including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation as directed by the Engineer-in-charge and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed within all leads and lifts disposed materials to be neatly dressed levelled as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges

Excavation in drains and channels etcetera in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work , soft and hard blasting or any other mixed classification of soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering or bailing and pumping out water ( surface and sub soil water ) upto any depth or any quantum of water including cleaning of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth in all leads and lifts and then returning the stacked soil in 15cm (fifteen centimeters )layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth upto any leads and lifts and disposed materials to be neatly dressed levelled as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges

Excavation in drains and channels etcetera in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work , soft and hard blasting or any other mixed classification of soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering or bailing and pumping out water ( surface and sub soil water ) upto any depth or any quantum of water including cleaning of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth in all leads and lifts and then returning the stacked soil in 15cm (fifteen centimeters )layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth upto any leads and lifts and disposed materials to be neatly dressed levelled as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges

Excavation in soil in hilly area in all heights and depth and in all kind of soil by manual / mechanical means including saturated soil comprising of ordinary soil, Soft rock, hard rock , chiseling wedging out of rocks where blasting work is prohibited and their intermediate classification of soil setting out true to the required line ,grades , cutting and trimming of sides slopes to level as shown in the drawing and as directed by the Engineer in charge at site according to the MORD technical specification clause 302, 304 and 1603 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of road and transportation of useful material filling in roadways, cambers, embankments, for grade improvements and disposal of all surplus material to required of road or on approved dumping sites through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour if required. Recovery of stone to the tune of 460.44 cubic meter quantity at the rate of Rs. 300.00 (Rupees three hundred) per cubic meter shall be effected from the contractors running bills on pro-rata basis as per actual quantity executed. Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be compensated by him in all cases including carriage of materials within all leads and lifts and other incidentals charges. The rate including octroi, royality, malkana, toll tax sales tax or other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structucres graded and compacted to meet requirement of Tables 300.1 and 300.2 as per technical specifications clause 301.5 as per directions of Engineer-in- charge. The rates is including royality , malkana, toll tax , sale tax or any other taxes and carriage of materials within all leads and lifts and other incidential.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts , drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) as per drawings and M.O.R.D. technical specification clause 305.1 and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimeters ) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering as per entire satisfaction and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts.

Providing and laying back filling with granular material as per specification to a thickness of not less than 600mm ( six hundred millimeters ) with smaller size toward the wall and provided over the entire surface behind abutment, wing walls, return walls and retaining / breast walls to the full height compacted to firm condition complete as per drawing and M.O.R.D. technical specifications clause 1204.3.8 as per directions of Engineer-in- charge and including carriage of material within all leads and lifts and other incidential . The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Filling in plinth with sand under floor including watering, ramming ,consolidating and dressing complete as per HP.PWD. specifications or as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Stone filling under floor complete as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and filling crushed stone aggregate of 12 mm ( twelve millimeter ) to 90 mm (ninety millimeters)nominal size in soakage pit complete as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 ( one cement; five sand; ten graded stone aggregate 40mm nominal size ) with 15% (fifteen percent ) plum and curing complete including cost of form work in plain / cement concrete in Retaining walls, breast walls, the size of plum shall usually be 150mm to 300mm (one hundred fifty millimeters to three hundred millimeters ) as per drawings and HP.PWD. technical specifications and as per entire satisfaction and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidential. The rates including octroi, royality, malkana, toll tax , sale tax or any other taxes imposed by the Government.

Providing and laying 100mm ( hundred millimeters ) dia P.V.C. pipe weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining wall/breast walls extending through the full width of the structures with slope of 1(V):20(H) (one vertical : twenty horizontal ) towards drawing face complete as per drawing and M.O.R.D. technical specification Clauses 614, 709, 1204.3.7 as per directions of Engineer-in- charge and including carriage of material within all leads and lifts and other incidential . The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depths below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetera . and mass concrete including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights / depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plan in any heights / thickness/depths etcetera upto all foor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, cantilevers, bressumers and lintels not exceeding any depth / thickness upto all floor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing upto all floor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width etcetera upto all floor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like etcetera upto all floor level including carriage of materials within all leads and lifts and other incidental.

Providing and laying cement concrete 1:6:12 (one cement; six sand : twelve graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size vibrated and mechanically mixed and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads and lifts and other incidentals charges as per approved drawing , design, and as directed by Engineer in charge.

Providing and laying cement concrete 1:4:8 (one cement; four sand : eight graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size vibrated and mechanically mixed and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads and lifts and other incidentals charges as per approved drawing ,design, and as directed by Engineer in charge.

Providing and laying damp proof course 100mm ( one hundred millimeters ) thick with cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 12.5mm (twenty point five millimeter) nominal size and including the form work and curing complete in all floors including carriage of materials within all leads and lifts and other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Applying a coat of hot bitumen (mexphalt 80/100 ( eighty/ one hundred ) or equivalent) using 1.70 Kg(one point seven zero)Kilogramme. per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked in kerosene oil complete including carriage of material with in all leads and lifts and other incidential as per approved drawings , design, and as directed by Engineer in charge

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters)with cement contents not less than 330 kg (three hundred thirty kilogramme) per cubic meter mixed and vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like in all depths/ thickness etcetra up to all floor level including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic meter vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls ( upto any thickness ) but not less then 0.10 m ( zero point one zero meter ) including attached pilasters, buttresses, plinth and string courses etcetera and the like from top of foundation upto all floor level including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness up to all floor level including carriage of material within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair cases ( except spiral stair cases) excluding landing but including preparing of top surfaces and finishing of nosing upto all floor level including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic vibrated and mechanically mixed and curing complete in reinforced concrete chajjas not exceeding 10cm ( ten centimeter ) and or any thickness upto all floor level including finishing the exposed surface with cement mortar 1:3 ( one cement: three sand ) to give a smooth and even surface including centering / form work but excluding reinforcement including carriage of materials within all leads and lifts and other incidental as per approved drawings , design, and as directed by Engineer in charge

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic vibrated and mechanically mixed including to give smooth and even surfaces including centering shuttering etcetera but excluding cost of reinforcement in moulding , cornics, plain window sills etcetera not exceeding 15cm ( fifteen centimeter ) in girth where required as per approved drawing and design and curing complete excluding cost of reinforcement upto all floors including carriage of materials within all leads and lifts and other incidental

Providing and laying mild/ tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all heights including cost of binding wire for all floors including carriage of materials within all leads and lifts and other incidentials.

Random rubble masonry polygonal / rubble masonry ( un coursed / brought to courses ) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 ( one cement: six sand : twelve graded stone aggregate 20mm ( twenty millimeters ) nominal size at plinth level in cement mortar 1:6 ( one cement: six sand) and curing complete in all floors including carriage of materials within all leads and lifts and other incidental as per approved drawings , design, and as per direction of Engineer in charge.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth in mass including racking out joints in cement mortar 1:4(one cement: four sand) and curing complete including carriage of materials within all leads and lifts and other incidental as per approved drawings , design, and as per direction of Engineer in charge .

Construction of 28 cm (twenty eight centimeters) thick cavity wall consisting 5 cm(five centimeters) wide cavity and 11.5 cm (eleven point five centimeters) thick inner and outer wall of second class brick laid in cement mortar 1 : 3 (one cement: three sand ) and strengthend with hoop iron and bitumen coated cross ties including making weep holes and vent holes complete, 6/8 mm(six/eight milimeters) dia bars in'Z' shape crossing each others shall be provided at the intervals of 90 to 100 cm (ninty to hundred centimters) both horizontelly and vertically in the cavity wall. At the time of masonry work it may be ensured that the cavity between the walls does not get filled with the cement mortar as per design / drawing and specification and curing complete including carriage of materials within all leads and lifts and other incidental. (Area of one face only will be measured / considered for payment.)

Brick masonry using second class common burnt clay building bricks in super structure above plinth level in all heights / floor level in cement mortar 1;6( one cement; six sand)and curing complete including carriage of materials within all leads and lifts and other incidental charges and as per direction of Engineer in charge .

Second class half brick masonry in common burnt clay building bricks in super- structure above plinth level upto floor any level in cement mortar 1:4 (One Cement : four sand ) and curing complete including carriage of materials within all leads and lifts and other incidental charges and as per direction of Engineer in charge.

Second class half brick masonry in common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (One Cement : four sand ) and curing complete including carriage of materials within all leads and lifts and other incidental charges and as per direction of Engineer in charge.

Brick masonry using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:4( one cement; four sand)and curing complete including carriage of materials within all leads and lifts and other incidental charges and as per direction of Engineer in charge .

Providing and fixing 40mm (forty millimeters )thick second class deodar wood panelled glazed or panelled and glazed shutter for oepanable windows, with in fill panel of 5mm (five millimeters ) thick glass panes of MODI GUARDs or its equivalent including black enameled iron butt hinges with necessary screws complete including carriage of materials within all leads and lifts and other incidental.

Providing and fixing 35mm ( thirty five millimeters ) thick factory made flush door shutters commercial both side including non-decorated phenol bonded termite resistant and water proof core of block board construction with frame of first class hard wood and well matched commercial 3 (three ) ply veneering with vertical grains of cross bands and face veneers on both faces of shutters including black enamelled M.S. butt hinges and or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing Cup board Cabinet with 19mm ( ninteen millimeter ) commercial board 8 (eight ) thick backing of uniply /green ply or its equivalent ISI marked No. 1659 and 19 mm (nineteen millimeter ) thick commercial board shutters with piano hinges including providing 6mm thick beading of Deodar wood on exposed surface on commercial board including magnetic catcher and PTMT handle 125 mm (one hundred twenty five millimeter) size of Prayag and polishing the internal surface with Malamine polish including 1 mm (one millimeter) thick lamination of sunmica of ISI marked IS No. 12823 of approved shade and sample of kitvista of kitply or its equivalent on outer surface of the cupboard shutters including providing mortice lock as per Architectural drawing complete including carriage of materials within all leads, lifts and other incidental charges and as directed by the Engineer in charge.

Providing and fixing 40mm(forty millimeters) thick second class deodar wood wire gauge shutters using galvanized Mild steel wire gauge of I.S.gauge designation 85-G ( eighty five-G )with wire of dia 0.56mm (zero point five six millimeters)for doors, windows, and clerestory windows including first class deodar wood ornamental beading 20mm x 12.5mm ( twenty millimeter into twelve point five millimeters ) bright finished / black enamelled iron butt hinges with necessary screws including carriage of material with in all leads and lifts and other incidental charges and as directed by the Engineer in charge.

Providing and fixing 25mm ( twenty five millimeters ) thick factory commercial board (in plate form of music room ) including all necessary fitting complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges and as directed by the Engineer in charge.

Providing and fixing 25 mm (twenty five millimeter ) thick wood wool acoustical proof wood tiles pennalling size 60x12 cm (sixty into twelve centimeter ) over ready made power coated metal sheet section frame work 600 mm (six hundred millimeter centre to centre as per drawing and as per direction of Engineer-in-charge and as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges and as directed by the Engineer in charge

Providing and fixing 12 mm ( twelve millimeter) thick green chalk board ( Non- Magnetic ) with superior quality framing specially anodized aluminium profile 20x15 mm ( twenty into fifteen millimeters )with corners of black plastic shall be provided the board surface shall be non porus cermic partical on the top green surface for smooth writting with chalk over 11 mm ( eleven millimeter ) thick paricle board which shall have backing material of galvanised sheet 0.28 mm ( zero point twenty eight milimeters ) thick approxi the board shall be fixed on the wall with specially designed "J" clump and square clumps with the help of Nylon sleeves and screws as per site requirement complete and carriage of materials within all leads and lifts and other incidental and as directed by the Engineer in charge.

Providing and fixing Mild Steel plain grills of required pattern in angle iron frame of windows etc. with M.S.flates square or round bars with round headed bolts and nuts or by screws including welding with frame complete in all respect including carriage of materials in all leads and lifts and as directed by the Engineer in charge. .

Providing and fixing 50mm (Fifty milimetres) size bright finished brass cup board or ward rob knobs etcetera complete in all respect, including carriage of materials in all leads and lifts and other incidental.

Providing and fixing 65x35mm (Sixty five into thirty five milimetres) size bright finished aluminum cup board or ward rob lock with six leavers including necessary screws complete in all respect ,including carriage of materials in all leads and lifts and other incidental.

Providing and fixing chromium plated brass sliding door bolts with nuts and screws etc. including carriage of materials in all leads and lifts and other incidental. 250x16mm.(Two hundred fifty into sixteen milimetres )

Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etc. complete including carriage of materials with in all leads and lifts and other incidental. 200 x 10mm (two hundred into ten millimeter).

Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etc. complete including carriage of materials with in all leads and lifts and other incidental. 150 x 10mm (one hundred fifty into ten millimeter)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. 125mm ( one hundred twenty five millimeters )

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. 100mm ( one hundred millimeters )

Providing and fixing Mild steel channel 75x40 mm ( seventy five into forty millimeter ) door, window frame manufactured from M.S. channel section 75 x40 x 4mm ( seventy five into forty into four millimeter) in combination and Mild steel flat 75 x 4mm (seventy five into four millimeter) as per design and drawings including hinges, jamb, lock Jamb, beeds if required thrashold of mild steel angle 50 x 25 mm (fifty into twenty five millimeter) or base of 1.25mm (one point twenty five millimeter) pressed steel welded or rigidly fixed by mechanical means lugs with split end tails to each jambs including steel butt hinges 2.5 mm (two point five millimeter) thick with provision for locking arrangement and shock observers as specified and applying a coat of approved steel primer after pretreatment of the surface or as directed by the Engineer-in-Charge, including applying a priming coat of red lead paint after pretreatment of the surface and carriage of materials within all leads, lifts and other incidentals and as directed by Engineer in-charge.

Providing and fixing angle iron door frame single rebate manufacture for Mild steel angle iron 35x35x4 mm ( thirty five into thirty five into four millimeters and Mild steel flat 50x4 mm (fifty into four millimeter ) in combination as per drawing design including hings jambs lock jambs mild steel angle 50x25 mm ( fifty into twenty five millimeters ) welded or rigidly fixed by mechanical means lugs with split and tails to each jambs including steel butt hings 2.5 mm ( two point five millimeters ) thick with provision of locking arrangement and shock absorvers as specified and applying a coat of approved steel primer including carriage of materials within all leads, lifts and other incidentals and as directed by Engineer in-charge.

Providing and fixing angle iron cupboard frames manufactured from Mild steel Angle iron section 25X25X5mm ( twenty five into twenty five into five millimeter ) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm ( twenty five into twenty five millimeter ) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimeter ) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals and as directed by Engineer in-charge

Providing and fixing factory made double rebate steel shutters of windows side, top hung and fixed windows, (one side glazed and other wire gauged) standard rolled steel sections/steel Z-section and T-sections, T-hinges joints, metred and welded with manufactured relevant ISI standard specifications with 16x3.15mm ( sixteen into three point fifteen millimeters ) lugs 10 cm ( ten centimeter ) embedded in cement concrete block 15 x 10 x 10 cm ( fifteen into ten into ten centimeter ) of size in cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 20mm ( twenty millimeters ) nominal size three hundred six including handles with closing device and making provision of other windows fixtures, where required, including providing and fixing of 4mm (four millimeters) thick glass pans of Modi Guard with glazing clips and special metal sash putty of approved make for glazed shutters and metal beading with screws etcetera and including fixing of wire gauge using galvanized MS wire gauge of IS gauge designation 85-G (eighty five-G) with wire of 0.56mm (zero point five six millimeters) and for fixing wire mesh with MS flat 20x3mm (twenty into three millimeters) for beading and screws complete including frame with ISLC 75mmx40mm ( seventy five millimeter into forty millimeter ) applying a priming coat of approved steel primer after pretreatment of the surface as per HPPWD specifications or as directed by the Engineer-in-Charge, including applying a primer coat of red lead paint after pretreatment of the surface and carriage of materials within all leads, lifts and other incidentals. The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government and as per direction of Engineer in-charge

Providing and fixing Mild steel rectangular pipe stair railing over Mild steel flat having baluster 19mmx19mm and 12mmx12mm ( ninety millimeter into ninety millimeter and twelve millimeter into twelve millimeter) Mild steel solid square bars in combination with Mild steel flat 40x5mm (Forty into five millimeter) with a clear height of 85cm (eighty five centimeter )at the rate 60cm (sixty centimeter ) centre to centre , jointing in cement concrete steps and jointing with electrical gas welding at top along wing hand rail of hollow Mild steel rectangular pipe of 75x25mm (Seventy five into twenty five millimeter) (SWG-16) Vertical Mild steel solid square bars, baluster welded/ jointed with each with 2 Nos. (two number ) M.S flat of 40x6mm (forty into six millimeter) complete with a priming coat of read paint as per specification and direction of the Engineer-in-Charge. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer in-charge.

Providing and fixing Mild steel hollow pipe of 50 mm ( fifty millimeter) dia Mild steel pipe hand rail slip resistant with round ends at two levels at 75 cm ( seventy five centimeters ) and 90 cm (ninety centimeter) height it should extended 30 cm (thirty centimeter ) beyond the top and bottom of the ramp complete as per architectural design welded with 25 mm ( twenty five millimeter ) dia Mild Steel pipe baluster to 50 mm ( fifty millimeter ) dia Mild Steel pipe embedded in cement concrete to parapet sat 60 cm ( sixty centimeter centre to centre interval with Polyvinyl chloride hand rail baluster dully welded/jointing with electric gas welding with top Mild steel flat complete as per architectural design and applying priming coat of red lead paint complete including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer in-charge.

Providing and fixing 12mm (twelve millimeters) thick and 150mm (one hundred fifty millimeters ) wide first class deodar wood pelmet with 25mm (twenty five millimeter ) dia meter wooden curtain rod and brackets including fixing with 25x3mm (twenty five into three millimeter ) mild steel flat 10 cm ( ten centimeters ) long and plugs etcetera complete with necessary screws including carriage of materials within all leads and lifts and other incidental and as directed by the Engineer in-charge.

Providing and laying 25 mm (twenty five millimeter ) thick mirror polished 55x55 cm ( fifty five into fifty five centimeter ) Kota stone slab flooring with Jaislmer yellow band 7.5 cm (seven point five centimeter ) wide 70% Kota stone and 30% Jaislmer yellow band 20 mm (twenty millimeter ) (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete upto all floor level or as per directions of Engineer in charge including carriage of materials within all leads and lifts and other incidental and as directed by the Engineer in-charge.

Providing and laying Kota stone slab 25mm ( twenty five millimeter) thick in risers of steps ,skirting dado and pillar laid on 12mm ( twelve millimeter) (average)thick cement mortar 1:3 (1cement :3 sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete upto all floor level including carriage of material within all leads and lifts and other incidental and as directed by the Engineer in-charge.

Providing and laying 300 x 300 x25 mm( three hundred into three hundred millimeters into twenty five millimeter) thick vibro hydraulic compressed and polished precast terrazzo tiles of ISI marked IS No. 1237 of NTC or its equivalent in 70% (seventy percent) white and 30% (thirty percent) grey cement The ratio of chips shall be 55% (fifty five percent) white chips, 15% (fifteen percent ) of each Mahroon, yellow and dark green , having chips size 0.B.2B laid in floor, treads of steps and landings on a bed of 25mm (twenty five millimeter) average thickness of cement mortar 1 : 6 (one cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing completed with tiles of Silver Grey shade upto all floor level as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Malkhana, Royality Octroi, toll tax or any taxes imposed by the Government

Providing and laying 300 x 300 x25 mm( three hundred into three hundred millimeters into twenty five millimeter) thick vibro hydraulic compressed and polished precast terrazzo tiles of ISI marked IS No. 1237 of NTC or its equivalent in 70% (seventy percent) white and 30% (thirty percent) grey cement The ratio of chips shall be 55% (fifty five percent) white chips, 15% ( fifteen percent ) of each Mahroon, yellow and dark green , having chips size 0.B.2B laid in skirting, risers of steps not exceeding 30 cm ( thirty centimeter ) in height on 10mm (ten millimeter) average thickness of cement plaster 1 : 3 (one cement : three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing completed with tiles of Silver Grey shade upto all floor level as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Malkhana, Royality Octroi, toll tax or any taxes imposed by the Government

Providing and laying vitrified matt tiles finish of 605x605mm x 10mm ( six hundred five into six hundred five millimeter x ten millimeter ) of Kajaria / orient -Bell/ Nitco / Rak or its equivalent tiles in grey / coloured of required approved shade in flooring, treads of steps and landing laid on a bed of 12mm ( twelve millimeters ) thick cement mortar 1:3 ( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment in white cement shade to match the shade of tiles complete including carriage of materials within all leads, lifts and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge. The rates includes royalty charges, octroi, sale tax ,malkana, and all other taxes as imposed y the Government.

Providing and laying vitrified matt finished of Kajaria / orient Bell/ Nitco / Rak or its equivalent tiles ( 300x300x8mm ) ( three hundred into three hundred into eight millimeters ) in grey /coloured or of required approved shade in skirting, risers of steps and dados laid on 12mm ( twelve millimeters ) thick cement mortar 1:3 ( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment in white cement shade to match the shade of tiles complete including carriage of materials within all leads, lifts and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge. The rates includes royalty charges, octroi, sale tax ,malkana, and all other taxes as imposed the Government

Providing and laying 40mm(forty millimeters) thick Cement concrete flooring 1:2:4 (one cement; two sand; four graded broken/ crushed stone aggregate 20mm (twenty millimeters) nominal size ) laid in one layer finished with a floating coat of neat cement upto all floor level and curing complete including carriage of materials with in all leads and lift other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge.

15 mm ( fifteen millimeters ) thick Cement plaster skirting or dado upto any height with cement mortar 1:3(one cement; three sand ) finished with a floating coat of neat cement including rounding of junction with floors and curing complete upto all floor level including carriage of materials within all leads and lifts other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge.

Providing and laying spartic ceramic tiles (non slippery ) of Kajaria. nitco / orient-Bell/ Rak or its equivalent, size 300 x 300 mm ( three hundred into three hundred millimeters ) x 5.5mm ( five point five millimeters ) thick in treads of steps laid on a bed of 12mm ( twelve millimeters ) thick cement mortar 1:3 ( one cement : three sand ) finished with flush pointing in white cement complete including carriage of material within all leads and lifts and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge.

White glazed tiles 6mm (six millimeters) thick 20x 30 cm ( twenty into thirty three centimeters ) of orient-Bell/ Kajaria/ Rak or its equivalent in skirting, risers of steps and dado for all heights on 12mm (twelve millimeter) thick cement mortar 1:3 ( one cement; three sand) and jointed with white cement slurry complete upto all floor level including carriage of materials within all leads and lifts and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge

Providing and laying red sand stone slab flooring laid over 40 mm ( forty millimeters )average thick base of cement mortar 1:4 ( 1 cement : 4 sand ) and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polished finish complete upto all floor level including carriage of materials in all leads and lifts and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge.

Providing and laying 40mm (forty millimeter thick block heavy duty precast cement concrete inter locking paver blocks vibraction compacted upto M-50 (M-fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty five millimeter) thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub-base concrete floor to be paid for separately) as per HPPWD specification as per approved drawing and designs or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 2mm(two millimeters) thick Polyvinayl chaloride antistatic venyl of LG HAUSYS or its equivalent Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) including carriage of materials within all leads, lifts, and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge

Providing and laying 20mm (twenty millimeters) thick Baroda green shade marble work (table rubbed and polished) in flooring laid over 20mm (twenty millimeters) thick base in cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar 1:2 (one cement is to two marble dust) with an admixture of pigment to match the shade of marble complete as per HPPWD specifications as per approved drawing and design or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Providing and laying white marble having grey streaks marble work ( tabled rubbed and polished for wall lining ) veneers work 2.50 cm ( two point fifty centimeters ) thick in cement mortar . 1:3 ( one cement : three sand ) including pointing white cement mortar 1 :2 ( one cement : two marble dust ) with an admixture of pigment to match the marble shade white marble upto all floor level including carriage of materials within all leads, lifts, and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge.

Providing and fixing 100mm (One hundred milimtres)diameteres on wall face P.V.C. (D-plast) rain water pipes 2.2mm thick suspreme or its equivalent conforming to IS NO. 13592-92 type-A of working pressure not less than 4.50 kgs(Four decimal five zero kilograms) per square centi- metre including filling the joints with aproved adhesive complete and as directed by the Engineer- in-charge including carriage of materials within all leads, lifts of materials and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge.

Providing and fixing on wall faces P.V.C. (D-plast) acessories for rain water pipes 2.2mm ( two point two millimeter ) thick supreme or its equivalent including filling the joints with approved adhesive complete and including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer- in-charge 75mm (seventy five millimeters)diameter PVC Plain bend

Providing and fixing on wall faces P.V.C. (D-plast) accessories for rain water pipes 2.2mm thick supreme or its equivalent including filling the joints with approved adhesive complete and including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer- in-charge 75mm (seventy five millimeters)diameter PVC Plain shoe.

Providing and fixing 75mm (seventy five millimeters) dia meter P.V.C (poliynial chloride ) holder bats clamps of approved design to P .V.C. pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the wall etcetera complete including carriage of materials within all leads and lifts and other incidental as per approved drawing, design and as directed by the Engineer- in-charge .

Providing and fixing 0.60mm (zero point six zero millimeters) thick Kole metal prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster ( R M P ) organic coating of 20( twenty ) micron over 5 ( five ) micron primer coating to back coat of polyster of 5 ( five ) micron over 5 ( five ) micron primer coating including fixing with prepainted self tapping screws etcetera size 5.5mm ( five point five millimeter) dia meter and 75.5mm ( seventy five point five millimeter ) length with EPDM seal and rubber washers with all accessories as required as per directions of Engineer in charge complete including carriage of materials within all leads and lifts and other incidental.

Providing and fixing ridges or hips 60 cm (sixty centimeters)over all with 0.60mm (zero point six zero millimeters) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) micron over 5 ( five ) micron primer coating back coat of polyster of 5 ( five ) micron over 5 ( five ) micron primer coating including fixing with prepainted self tapping screws etcetera of size 5.5mm ( five point five millimeter) dia meter and 75.5mm ( seventy five point five millimeter ) with EPDM seal with all accessories as required as per directions of Engineer in charge including carriage of materials within all leads and lifts and other incidental.

Providing and fixing valley 90cm ( ninety centimeters )over all 0.60mm ( zero point six zero millimeters ) thick Kole metal prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing fixed with prepainted self tapping screws etcetera size 5.5mm ( five point five millimeter) dia meter and 75.5mm ( seventy five point five millimeter )with EPDM seal complete with all accessories as required as per the directions of Engineer-in- charge including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing minimum 300mm (three hundred millimeter ) wide and minimum 300mm (three hundred millimeter ) deep (Clear ) plain galvanized iron sheet gutter with iron brackets 40x3mm ( forty into three millimeter ) size bolts and nuts and washers etcetera .including making necessary connections with rain water pipe complete as per design and as per direction of Engineer-in Charge complete including carriage of material within all leads and lifts and other incidental charges.

Providing and fixing Mild steel black plain sheet 1.66mm ( one point six six millimeters) to any thickness thick in eaves boards/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge ( Base members of steel work shall be measured and paid separately) including carriage of materials within all leads and lifts.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Steel work welded in built-up section trusses and frame work ,composed of beams, joists , channels, angle, Tees , flats with connecting plates etcetera as in grating, frame guard, bar ladders railing, bracket and similar work ceiling frame. including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. In grating, frame guard, bar ladders railing, bracket and similar work ceiling frame.

Applying priming coat over new steel and other metal surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter and scouerd with wire brushes from steel wool scraper and sand papering complete with ready mixed priming paint brushing red led oxide /zinic oxide chrome / wood primer pink including carriage of materials with in all leads and lifts and other incidental and as per approved drawings, design and as directed by the Engineer in charge.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt dust and other foreign matter with enamel paint other than white including carriage of materials within all leads and lifts and other incidentals and as per approved drawings, design and as directed by the Engineer in charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of materials within all leads and lifts and other incidentals and as per approved drawings, design and as directed by the Engineer in charge.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping with enamel paint other then white including carriage of materials within all leads, lifts of materials and other incidental and as per approved drawings, design and as directed by the Engineer in charge.

6mm (six millimeter)thick cement plaster in ceiling with cement mortar 1:3(one cement; three sand) upto all floor level and curing complete including carriage of materials with in all leads and lifts and other incidental as per approved drawings, design and as directed by the Engineer in charge.

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6(one cement; six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering in all heights / floor level including arises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm ( eighty millimeters ) in girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge.

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5(one cement; five sand) in single coat on fair side of brick/concrete/stone walls for interior plastering in all heights floor level including arises, internal rounded angles chamfers and/ or rounded angles not exceeding 80mm ( eighty millimeters ) in girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6(one cement; six sand) in single coat on fair side of brick/concrete/stone walls for interior plastering in all heights floor level including arises, internal rounded angles chamfers and/ or rounded angles not exceeding 80mm ( eighty millimeters ) in girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge.

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4(one cement; four sand) in single coat on rough side of brick/concrete/stone walls for interior plastering in all heights / floor level including arises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm ( eighty millimeters ) in girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge

20mm ( twenty millimeters) thick cement plaster with cement mortar 1:4(one cement; foursand) in single coat on rough side of brick/concrete/stone walls for interior plastering in all heights / floor level including arises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm ( eighty millimeters ) in girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge

Applying JK Birla whitewall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose material and other foreign matter sand papered smooth to give final finish to the surfaces complete including carriage of materials with in all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of Asian paints/Nerolac paints or its equarlied brand and manufacture of approved shade on undecorated concrete / stone / plastered wall surfaces with two coats to give an even shade and final finish after thoroughly cleaning / brushing the surfaces free from all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces complete including carriage of materials with in all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge.

Distempering (two coats)with oil bound washable distemper of Asian /Nerolac approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including priming coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of materials within all leads, lifts, and other incidentals and as per approved drawings, design and as directed by the Engineer in charge.

Applying One or more coat of Acrylic primer (spectrum / Asian/ Nerolac or equivalent of superior quality ) on new concrete/ masonry/ plastered surfaces after and including preparing the surface by thoroughly brushing the surfaces free from mortar drops and other foreign matter and sand papered smooth complete including carriage of materials with in all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge

Wall painting ( two coat ) with premium enamel paint of asian/ Nerolac paint approved brand and manufacture of approved shade for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surfaces free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces complete including carriage of materials with in all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge.

Providing plinth protection 50mm ( fifty millimeters) thick in cement concrete 1:3:6 ( one cement :three sand: six graded stone aggregate 20mm (twenty millimeters ) nominal size ) and curing complete including finishing the top surface of concrete smooth and carriage of materials within all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge.

Providing under layer for plinth protection of 75mm (seventy five millimeters ) thick ( unconsolidated ) bed of dry brick/stone broken/ crushed aggregate 40mm ( forty millimeters ) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge.

Construction of cover drain 15cmx23 cm ( fifteen centimeter into twenty three centimeter ) in cement concrete 1:3:6 (one cement :three sand :six graded broken/crushed stone aggregate 20mm (Twenty millimeters) nominal size including finishing the top surface ,earth work, shuttering ,cost of RCC slab over drain in cement concrete 1:2:4 (one cement :two sand :four graded broken/crushed stone aggregate 20mm (Twenty millimeters) nominal size including cost of reinforcement including carriage of materials in all leads and lifts and other incidental charges .

Providing and fixing grab bars with chromium plated steel pipe 40mm ( forty millimeters) dia at 78 cm ( seventy eight centimeter ) height with mild steel plate 4mm (four millimeters ) thick as per detail and position of seat wash basin with nuts ,bolts and clamps etc. including cutting holes and making good the walls complete in all respect and carriage of materials within all leads and lifts and other incidental

Providing and laying cement water proofing treatment with Dr. FIXIT-FAST-FLEX or equivalent with two component polymer modified comentitious coating consisting of comentitious powder and polymer liquid in two coats for first coat : clean and satutae surface and then applying a coat of Dr. FIXIT-FAST-FLEX and the same process shall be extended upto 300 mm ( three hundred millimeters) vertically the second coat shall be applied in opposite direction after 4 to 6 (four to six ) hours of firsty coat then sprinkle sand on top surface of applied Dr. FIXIT-FAST-FLEX then apply cement mortar 1: 4 ( one cement: four sand ) and admixed with 200ml . (two hundred milliliter ) of Pidi proof LW at the rate of 200ml . (two hundred milliliter ) per 50 kg. ( fifty kilogramme ) bag complete as per architectural drawing including carriage of materials within all leads and lifts and other incidental and as directed by the Engineer-in- charge.

Providing and fixing Uni stone 12mm (twelve millimeter ) . cladding on R.C.C.surface side as on faces of Arch masonry walls etcetera . on 12mm (twenty milllimeter ) thick cement plaster 1:3( one cement: three sand) and jointed with cement slurry including scaffolding etcetera complete as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges..

Providing and fixing in position steel shutters with vertical channels 20 mm x10 mm x 2mm ( twenty mmiliimeter into ten millimeter into two millimeter and braced with flat iron diagonals 20 mm X5 mm ( twenty millimeter into five millimeters) size with top and bottom rails of T.iron 40 mm X40 mm X6 mm ( forty millimeter into forty millimeter into six millimeter ) with 38 mm (thirty eight millimeter ) dia steel pulley complete with bolts and nuts locking arrangements, stoppers ,handles, including applying a priming coat of red lead paint as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges.

Providing and laying 60 mm (sixty millimeter ) thick NTC reinforced cement concrete Jali ( perforated) in cement concrete. 1:2:4 (one cement; two sand' four graded /crushed / broken stone aggregate including cost of form work and reinforcement complete as per approved design drawing and as per direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidental charges.

Providing and fixing false ceiling with monard perforated tiles 25 mm (twenty millimeter ) thick fine fisherd tile size 60 cm x 60 cm ( sixty centimeter into sixty centimeter ) with Galvnised iron Grid section frame work. The galvnised iron find wire to be supported from RCC ceiling / steel trusses by 4mm G.I. (four millimeter galvanised iron ) Wire with level adjuster hung from Mild steel Cleats and anchor fishers as per drawing. The Mild steel Cleats to be given two coats of red primer complete as per direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidental charges.

Providing and fixing P V C of supreme 75mm (seventy five millimeters) nominal diameter high pressure polyvinyl chloride . ( D-plast ) soil waste and ventilating pipe including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts and other incidental charges and as per direction of Engineer-in-charge .

Providing and fixing of PVC Single equal branch of required degree With oval access door insertion rubber washer 3 mm (three millimeter ) thick, bolts and nuts complete fitting 75 mm ( seventy five millimeters ) nominal size with approved adhesive etcetera . complete as per directions of Engineer-in- charge and including carriage of material within all leads and lifts and other incidental

Providing and fixing PVC or cast iron cowl 75 mm ( seventy five millimeters ) nominal diameter and including carriage of material within all leads and lifts and other incidental and as per directions of Engineer-in- charge,

Supplying and fixing Cast Iron cover light duty rectangular 455x610mm ( four hundred fifty five into six hundred ten millimeters ) with frame weight 38 kg ( thirty eight kilogramme) ( Single seat ) ( weight of cover 23 kg ( twenty three kilogramme) and weight of frame 15 kg ) ( fifteen kilograms ) as per directions of Engineer-in- charge and including carriage of material within all leads and lifts and other incidental and as per directions of Engineer-in- charge

Supplying and fixing 300mm x 300mm ( three hundred millimeters into three hundred millimeters ) cast iron. cover with frame for gully trap complete including carriage of materials within all leads and lifts and other incidental and as per directions of Engineer-in- charge

Providing and laying in trenches 150mm ( one hundred fifty millimeters ) dia meter) polyvinyl chloride ( D-plast ) pipe for disposal of waste water working pressure of pipe not less than 4.50 kg. per sqm ( four point fifty kilogramme per square meter ) including filling the joints with approved adhesive complete ( earth work in trenches ) to be measured an d paid for separately ) including carriage of materials within all leads and lifts and other incidental and as per directions of Engineer-in- charge

Providing and fixing HIND WARE/CERA MAKE orrisa pattern vitreous china water closet squatting pan No. 20042 (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) white shade (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals and as per directions of Engineer-in- charge. The rate including Sales tax, Toll tax or any other taxes imposed by the Government

Providing and fixing vitreous China wash down water closet (European Type WC pan) of approved make (HIND WARE/CERAMAKE) and of approved shade, with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) complete (seat cover to be measured and paid for separately ) Universal closet NO.20041/21028 of Hindware size 530x410mm (five hundred thirty into four hundred ten millimeter ) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing in position with clamps etcetera 32mm (thirty two millimeter ) nominal internal diameter galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan complete in all respects as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Providing and fixing plastic seat (solid/Hollow type) and cover for wash down water closet with CP brass hinges end rubber buffers solid type a white plastic seat and cover of Hindware or its equivalent. including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing vitreous china HIND WARE No.102012 (clair ) /CERA MAKE wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back size 550mmx400mm ( five hundred fifty into four hundred millimeters ) complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing CP brass waste for wash basin or sink 32mm ( thirty two millimeters ) dia meter complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing CP brass waste of Prayag/ Hindware/ Cera for wash basin or sink 40mm ( forty millimeters ) dia meter complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing 600mm x 450mm (six hundred millimeters into four hundred fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm ( six millimeters) thick asbestos cement sheet or ply wood sheet and fixed to wooden plugs with chromium plated Brass screws and washers complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge

Providing and fixing750x20mm.(Seven hundred fifty into twenty millimeter) chromium plated brass towel rail of Prayag/ Hindware/ Cera complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge .

Providing and fixing 600x120mm(Six Hundred into One Hundred twenty millimeter ) glass shelf with Chromium plated brass bracket of Prayag/ Hindware/ Cera and guard rail complete fixed to wooden plugs with Chromium plated brass screws including carriage of materials within all leads and lifts or as directed by the Engineer-in-Charge

Providing and fixing Plastic container liquid soap with Chromium plated brass lid of Prayag/ Hindware/ Cera brackets fixed to wooden plugs with Chromium plated brass screws including carriage of materials within all leads and lifts or as directed by the Engineer-in-Charge.

Providing and fixing chromium plated brass soap dish of Prayag/ Hindware/ Cera with Chromium plated brass brackets fixed to wooden cleats with Chromium plated brass screw complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing vitreous china (Hindware/Cera make )division plate for Urinals size 600mmx300 mm ( six hundred millimeter into three hundred millimeters ) complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing 15mm (fifteen millimeters )diamete chromium plated brass bib tap of Prayag/ Hindware/ Cera with capstan head complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge

Providing and fixing15mm (fifteen millimeter)diameters chromium plated brass pillar tap of Prayag/ Hindware/ Cera with capstan head complete including carriage of materials with in all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing chromium plated brass angle valve of Prayag/ Hindware/ Cera 15mm (fifteen millimeter)diameters without nuts and pipe complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing chromium plated 15mm (fifteen millimeters) diameter brass stop cock of Prayag/ Hindware/ Cera with necessary fitting including carriage of materials within all leads and lifts or as directed by the Engineer-in-Charge.

Providing and fixing white vitreous china flat back No 60001 with auto cistern of Hindware or wall corner type lipped front urinal basin of 430x260x350mm ( four hundred thirty into two hundred sixty into three hundred fifty millimeters ) and 340x430x265mm ( three hundred forty into four hundred thirty into two hundred sixty five millimeters ) sizes respectively with automatic flushing cistern with fittings RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass union and GI clamps complete including painted of cistern and fitting cutting and making good the wall floors where required one urinal basin with 5 (five litres ) automatic flushing cistern including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing P.V.C. Connection pipe with brass unions 300/450mm ( three hundred / four hundred fifty millimeter ) long and 15mm (fifteen millimeters) nominal bore including carriage of materials within all leads and lifts or as directed by the Engineer-in-Charge.

Providing and fixing 15mm ( fifteen milimetre)nominal bore brass full way valve with wheel complete including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge.

Providing and fixing plytheline aluminium polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 kitee or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall 1216 (one thousand two hundred sixteen ) (16mm O.D. pipe ) (sixteen millimeter outer dia )including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge.

Providing and fixing plytheline aluminium polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 of kitee or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall 1620 (one thousand six hundred twenty)(20 mm OD pipe) (twenty millimeter outer dia ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge.

Providing and fixing plytheline aluminium polythylene (PE-AL-PE) composite internal seal compressing fittings as per IS-15450-2004 of kitee or its equivalent for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) Equal tees 1216mm (one thousand two hundred sixteen millimeters ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Equal tees 1620 (one thousand six hundred twenty millimeters ) including carriage of materials within all leads, lifts and other incidentals incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Equal Tee 1620 (one thousand six hundred twenty millimeters ) all branches including carriage of materials within all leads, lifts and other incidentals incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polythylene (PE-AL-PE) Reducing Tee 2025 ( two thousand twenty five ) with all branches including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Female branch Tee 1216x1216x15mm ( one thousand two hundred sixteen into one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Female branch Tee 1620x1620mmx20mm ( one thousand six hundred twenty into one thousand six hundred twenty into twenty millimeter) (one thousand six hundred twenty into one thousand six hundred twenty millimeters into twenty millimeters ) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Female elbows 1216x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Female elbows 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polythylene (PE-AL-PE) Male thread connector 1216x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Male thread connector 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Fe-male thread connector 1216x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Fe-male thread connector 1620x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polythylene (PE-AL-PE) Couplers 1216 ( one thousand two hundred sixteen ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Couplers 1620 ( one thousand six hundred twenty ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polythylene (PE-AL-PE) Reducers 1620x1216 ( one thousand six hundred twenty into one thousand two hundred sixteen ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government. .

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Reducers 2025x1216 ( two thousand twenty five into one thousand two hundred sixteen ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government..

Providing and fixing 1000(one thousand ) liter net capacity tank P.V.C.(poly vinyl chloride) water storage tank cylindrical shape ( ISI :12701 marked / Treepal layer ) universal or equivalent make ) including providing and fixing 15mm ( fifteen millimeters) nominal bore galvanized mild steel tube over flow pipes, inlet and out let with fitting of suitable size along with ball valve and floating valve and P.V.C.( poly vinyl chloride) mosquito proof cover with locking arrangement including providing suitable base pad and hoisting in all heights including carriage of materials within all leads and lift and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government.

Providing and fixing 2000(two thousand ) liter net capacity tank P.V.C.(poly vinyl chloride) water storage tank cylindrical shape ( ISI :12701 marked / Treepal layer ) universal or equivalent make ) including providing and fixing 15mm (fifteen millimeters) nominal bore galvanized mild steel tube over flow pipes, inlet and out let with fitting of suitable size along with ball valve and floating valve and P.V.C.( poly vinyl chloride) mosquito proof cover with locking arrangement including providing suitable base pad and hoisting in all heights including carriage of materials within all leads and lifts and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government.

Providing and fixing P V C .( poly vinyl chloride) floor trap ISI marked of self cleaning design with iron screwed down or hinged grating without vent arm complete including cost of cutting and making good the walls and floors 110mm x 90mm (one hundred ten millimeter into ninty millimeters) nominal size or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Providing and fixing high pressure P V C ( poly vinyl chloride) spigot and socket waste ventilating pipes ISI marked including fixing with approved adhesive complete 150mm (one hundred fifty millimeters) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing high pressure P V C ( poly vinyl chloride) spigot and socket waste ventilating pipes ISI marked including fixing with approved adhesive complete 110mm (one hundred ten millimeters) diameter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government..

Providing and fixing PVC ( poly vinyl chloride) single equal branch with oval access door, ISI marked insertion rubber washer 3mm (three millimeter ) thick bolts and nuts complete including fixing with approved adhesive complete 150mm (one hundred fifty millimeter) diameter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government...

Providing and fixing PVC ( poly vinyl chloride) single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three millimeter ) thick bolts and nuts including fixing with approved adhesive etc. complete 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government...

Providing and fixing PVC ( poly vinyl chloride) door bend with oval access door, insertion rubber washer 3mm ( three millimeter ) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete : 110mm (one hundred ten millimeters) including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government..

Providing and fixing PVC ( poly vinyl chloride) single equal branch plain ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeters) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government..

Providing and fixing PVC ( poly vinyl chloride) collars ISI marked including fixing with approved adhesive etcetera complete , 150mm (one hundred fifty millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government

Providing and fixing PVC ( poly vinyl chloride) collars ISI marked including fixing with approved adhesive etcetera complete , 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing PVC ( poly vinyl chloride) plain bend ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing PVC ( poly vinyl chloride) off set 45° (forty five Degree ) ISI marked including fixing with approved adhesive etcetera . complete 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government...

Providing and fixing PVC ( poly vinyl chloride) clamps ISI marked of approved design with steel screws and rawl plugs etcetera . complete .150mm (one hundred fifty millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing PVC ( poly vinyl chloride) 'Y' junction with oval access door, insertion rubber washer 3mm (three millimeter ) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete 110 mm (one hundred ten millimeter ) diameters including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing PVC ( poly vinyl chloride) plain 'Y' junction ISI marked including fixing with approved adhesive etcetera. complete 110 mm (one hundred ten millimeter ) diameters including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing PVC ( poly vinyl chloride)110mm ( one Hundred ten millimeters) size “P” or “S” trap for water closet (squatting pan) ISI marked including jointing the trap with pan and PVC( poly vinyl chloride) pipe with approved adhessive etcetera complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing PTMT coloured/ white high density polythylene/polypropylene HIND WARE/CERA MAKE poly Venyl Chloride 10 liters (ten) capacity (full flush )European standard control low level flushing cistern with a pair of CI or MS brackets complete with fittings such as lead valves syphon, 15mm (fifteen millimeter) nominal size PVC ball valve with polythene float, CP brass handles, unions and couplings for connection with inlet, outlet and over flow pipes 40mm (forty millimeters) dia meter including Chromium plated flush bend and cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( over flow pipe to be measured and paid for separately ) complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing PTMT urinal waste coupling of approved quality and colour including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government

Providing and fixing PTMT bib cock of approved quality and colour fancy 15mm (fifeen milimter) with flange including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government

Providing and fixing PTMT reducer for push cock of approved quality and colour (20mm x15mm ) (twenty milimeters into fifteen milimeters) including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing PTMT push cock of approved quality and colour 15mm (fifteen milimter) female thread including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing chromium plated grating of superior quality for floor, gully , or Nahni trap complete including carriage of materials with in all leads and lifts . 100mm ( one hundred millimeter)dia meter size including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Constructing manhole with reinforced cement concrete top slab in cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size), in foundation concrete 1:4:8 ( one cement : four sand: eight graded / crushed stone aggregate 40mm(forty millimeters) nominal size in side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size finished smooth complete including curing and testing a) inside size 800mmx800mmx500mm (eight hundred millimeters into eight hundred millimeters into five hundred millimeters) including cast iron cover with frame (light duty single seal pattern-I ) 455 x 610mm( four hundred fifty five into six hundred ten millimeters) internal dimension total weight of cover and frame to be not less than 38 kg. ( thirty eight kilogramme ) (Weight of cover 23 kg. (twenty three kilogramme) and weight of frame 15 kg.)(fifteen kilogramme) with 200mm (two hundred millimeters ) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(one cement; three sand) complete including carriage of material within all leads and lifts and other incidentals or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government

Constructing manhole with reinforced cement concrete top slab in cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size, in foundation concrete 1:4:8 ( one cement : four sand: eight graded / crushed stone aggregate 40mm(forty millimeters) nominal size in side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size finished smooth complete including curing and testing a) inside size 1200mmx900mmx1000mm (one thousand two hundred millimeters into nine hundred millimeters into one thousand millimeters) including cast iron cover with frame (medium duty ) 500mm( five hundred millimeters) internal dia meter total weight of cover and frame to be not less than 116 kg. ( one hundred sixteen kilogramme ) (Weight of cover 58 kg. (fifty eight kilogramme) and weight of frame 58 kg.)(fifty eight kilogramme) with 200mm (two hundred millimeters ) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(one cement; three sand) complete including carriage of material within all leads and lifts and other incidentals or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Constructing manhole with reinforced cement concrete top slab in cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size, in foundation concrete 1:4:8 ( one cement : four sand: eight graded / crushed stone aggregate 40mm(forty millimeters) nominal size in side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size finished smooth complete including curing and testing a) inside size 1200mmx900mmx1500mm (one thousand two hundred millimeters into nine hundred millimeters into one thousand five hundred millimeters) including cast iron cover with frame ( medium duty ) 500mm( five hundred millimeters) internal dia meter total weight of cover and frame to be not less than 116 kg. ( one hundred sixteen kilogramme ) (Weight of cover 58 kg. (fifty eight kilogramme) and weight of frame 58 kg.)(fifty eight kilogramme) with 300mm (three hundred millimeters ) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(one cement; three sand) complete including carriage of material within all leads and lifts and other incidentals or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Constructing manhole with reinforced cement concrete top slab in cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size), in foundation concrete 1:4:8 ( one cement : four sand: eight graded / crushed stone aggregate 40mm(forty millimeters) nominal size) in side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size) finished smooth complete including curing and testing a) inside size 1200mmx900mmx2000mm (one thousand two hundred millimeters into nine hundred millimeters into two thousand millimeters) including cast iron cover with frame (medium duty ) 500mm( five hundred millimeters) internal dia meter total weight of cover and frame to be not less than 116 kg. ( one hundred sixteen kilogramme ) (Weight of cover 58 kg. (fifty eight kilogramme) and weight of frame 58 kg.)(fifty eight kilogramme) with 300mm (three hundred millimeters ) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(one cement; three sand) complete including carriage of material within all leads and lifts and other incidentals or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) diameter PVC waste pipe flexible (Coil Type) length not less than 800 mm (eight hundred milimeters)for wash basin or sink complete including carriage of materials within all leads and lifts and other incidentals.

Providing and fixing 110mm ( one hundred ten milimeters ) dia meter PVC ( poly vinyl chloride) cowl complete including carriage of materials within all leads and lifts and other incidental.

Providing and fixing vitreous china (Hindware/Cera Make ) pedestral for wash basin complete including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Jet spray 1.5 m ( one point five meter (PTMT ) including carriage of material with in all leads and lifts and other incidentals.

Tung Builders Pvt Ltd

M/s Satish Kumar Sharma

H. C. Bansal Engg. & Contt.