REPAIRS TO JOINERY ROOF FLOOR PLINTH DRAIN AND OTHER MISC WORKS IN POCKET NOS 1 3 AND 4 IN THE AREA OF AGE BR I UNDER GE ROORKEE

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6 m mean radius and built in cement mortar (1:4) complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan to any radius in half brick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on other than fair faces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar (1:3) on fair finished concrete surfaces as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of primer over 1.5mm thick layer of wall care putty of approved make complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing decorative treatment of any description on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing decorative treatment of any description on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper (white or tinted) over 1.00mm thick layer of wall care putty of approved make complete all as specified and directed.

Dismantling existing sunken floor n.exc 450mm deep in toilets/WCs / Bathrooms and removing the cinder/concrete from sunken portion and re-laying of sunken floor as specified below:- (a) cleaning of RCC surfaces to remove all loose dirt, dust, loose particles etc with compressed air or by any other suitable method depending on site conditions, grinding sharp edges (if any) etc (b) M&L for applying glass fiber reinforced acrylic modified cementitious coating system with base coat @ 1.50 Kg/Sqm glass fiber reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or MC Bauchemie India Pvt Ltd.(d). (c) M&L for protection plaster 15mm thick in cement mortar (1:3) mixed water proofing compound of approved make as per manufactirer's instructions. (d) M&L for providing 25mm dia GI pipe, medium grade as in spout projecting at least 150mm beyond outer face of wall. (e) M&L for filling of sunken portion with 40 mm graded broken brick aggregate including levelling, watering and ramming to a true surface. (f) M&L for 50 mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in flooring, finished fair and even all as specified. (g) Cost of all the above provisions shall be deemed to be included in the quoted rates and nothing extra to be paid on this account. Note :- (i) The work shall be executed by authorised manufacturers / applicator. (ii) Only plan area of the toilet/WC/bath shall be measured for payment purposes. (iii) Water proofing compound shall be measured and paid for separately at supply only rates.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid joint free heavy duty vitrified paver coloured tiles 8 to 10 mm thick of size 300x300mm in floors etc, laid over and including 15 mm thick screed bed in cement mortar (1:4), set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L non-skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L non-skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic joint free colour tiles of size 450X 350X 7 mm/ 450x 300 x7mm thick, laid over and including 10mm thick screed bed in cement mortar (1:4) in vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x200 x7mm thick, laid over and including 10mm thick screed bed in cement mortar (1:4) in vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F in repairs, 110 mm bore PVC (SWR) pipe, single socketed, laid in trenches/flooring or fixed to walls in any length with rubber ring joints complete all as specified and directed.

S&F in repairs, 75 mm bore PVC (SWR) pipe, single socketed, laid in flooring or fixed to walls in any length with rubber ring joints complete all as specified and directed.

S&F in repairs, 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repairs, 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors & pavings n.exc 15 cm thickness below or above GL complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in flooring, hard standing, plinth protection etc, laid in alternate bays n'exc 2.50 Sqm and joints filled with mastic filling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (40 mm agraded stone aggregate) as in sub base and the like complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B1 (Using 20mm graded stone aggregates) as in flooring, finished even and smooth using extra cement complete all as specified and directed.

M&L for cement concrete chequered tiles 250 x 250 x 25 mm thick with grey cement & pigment, laid over and including 15mm thick screed bed in cement mortar (1:6), set and jointed in neat grey cement slurry and pointed in colored cement to match complete all as specified and directed

M&L for 60 mm thick machine pressed precast M-35 Grade concrete interlocking paver block with grey cement and pigment of approved shape and size, conforming to IS 15658-2006, laid over sand cushioning complete all as specified and directed. Note: Sand for cushioning shall be measured and paid for separately at supply & laying rates.

Supply and laying dry natural sand in 25 mm thickness for cushioning to interlocking paver block complete all as specified and directed.

Dismantling of brick tiles / terracing tiles, single layer on roof complete all as specified and directed.

Demolition of mud phuska on roof, laid in any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-1, (using 20 mm graded crushed stone aggregate) as in roof padding and the like including mixing of water proofing compound as per manufacturers' instructions complete all as specified and directed. Note: WPC shall be measured and paid for separately at supply only rates.

M&L for 20 mm thick rendering in cement mortar (1:4) mixed with water proofing compound as per manufacturers' instructions on fair faces roof slab, finished even and fair complete all as specified and directed. Note: WPC shall be measured and paid for separately at supply only rates.

Supply only liquid water proofing compound of approved quality, complete all as specified and directed.

M&L for 40mm thick brick tiles laid over existing/newly laid APP memberane with and including 15mm thick bedding layer in cement mortar (1:3) and joints grouted flush in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed.

All as per serial item No. 37.00 above but except tiles

M&L for 80mm thick average consolidated thickness, mud phuska on flat roofs including 25mm thick mud plaster and 3 mm thick leeping plaster complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0, (using 12.5mm graded stone aggregates) as in floor/ roof surface complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) mixed with WPC on roof surfaces finished even and smooth without using extra cement. Note : WPC shall be measured and paid for separately at supply only rates.

M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforcement with following:- (a) M&L for surface preparation by removal/ taking down of existing treatment of tar felt/ tiling/loose particle to ensure or clean smooth and dry surface and preparing the surface (b) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (c) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fiber as reinforcement on primed surface by torch application with side over laps & joints over laps etc as per manufacturers instruction. (d) M&L for finishing of top surface by two coat of aluminium paint over a coat of hot blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufacturers instruction. (e) M&L for providing test with filling of water over roof slab continuously for 48 hours all as specified and directed. (f) M&L for providing template of size 450 x 450 mm to each bldg where roof treatment is carried out with marking CA No, date of roof treatment, expiry date, etc all as specified and directed.

Dismantling of water storage tanks of 1000 ltrs capacity and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 Ltrs capacity, hoisted and fixed in position including 20mm size PTMT ball valve complete all as specified in SSR Part I and directed by Engineer-in-Charge.

Dismantling of water storage tanks of 500 ltrs capacity and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 Ltrs capacity, hoisted and fixed in position including 20mm size PTMT ball valve complete all as specified in SSR Part I and directed by Engineer-in-Charge.

Disconnecting existing water storage tanks of capacity n.exc 500 ltrs for cleaning and removing all scale and dirt etc from OH water storage tanks of any description (PVC, Cemented, AC or GI ) including cleaning the mouths of inlet & outlet pipes etc and re-fixing in position complete all as specified and directed.

Disconnecting existing water storage tanks of capacity exc 500 ltrs but n.exc 1000 ltrs for cleaning and removing all scale and dirt etc from OH water storage tanks of any description (PVC, Cemented, AC or GI ) including cleaning the mouths of inlet & outlet pipes etc and re-fixing in position complete all as specified and directed.

S&F in repairs, 20mm size ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm dia bore GI tubing ISI marked medium grade with all fittings and fixed to walls and ceilling or laid in flooring, including cutting chases in wall for concealing of pipe (if required) and taking down old water tubing complete all as specified and directed.

S&F in repairs, 20mm dia bore GI tubing ISI marked medium grade with all fittings and fixed to walls and ceilling or laid in flooring, including cutting chases in wall for concealing of pipe (if required) and taking down old water tubing complete all as specified and directed.

S&F in repairs, 15 mm dia bore PTMT bib tap (Minimum weight 90 gms) of any colour and fixed complete all as specified and directed.

S&F in repairs, 15mm dia bore pillar tap of PTMT (Minimum weight 110 gms) of any colour, high pressure, screwed for iron pipe complete all as specified and directed.

S&F in repairs, CP brass shower rose 125 mm size suitable for 15 mm bore pipe, single lever over head shower including shower arm casted 190 mm long flat shape with flange complete all as specified and directed. Make:-Prayag Cat part No-BOS-87 and equivalent

S&F in repairs, PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S&F in repairs, 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet, ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed.

S&F in repairs, vitreous china squatting pan with integral footrest (Orissa pattern) long pan of size 580x440mm, white, with 'P' or 'S' trap including connection to trap, and to flushing pipe, anti-syphonage pipe etc including making good to floor (excluding flushing cistern and flush) complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (Pedestal pattern) white including 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed.

S&F in repairs, 15mm dia bore stop/ angle cock (ISI marked) fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends complete all as specified and directed. Make: Prayag, Cat Part No. 8910 or equivalent in ESSCO (Jaquar), Marc or Johnson.

S&F in repairs, 15mm dia bore stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly or push button type handle as required, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin, white flat back of size 550 x 400 mm (excluding tap) but including waste coupling, waste pipe and a pair of MS bracket etc complete all as specified and directed.

S&F in repairs, 15mm dia bore fancy type pillar tap, cast copper alloy chromium plated with capstan head, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shank and fly-nut, screwed for iron pipe and fixed complete all as specified and directed . Make: Prayag Cat Part No. 8903 or equivalent in ESSCO (Jaquar), Marc or Johnson.

S&F in repairs, health faucet 8 mm dia 1.20 mtr long flexible tube & wall hook complete all as specified and directed. Make: Jaquar Cat Part No. ALD-573 or equivalent in Prayag, Marc or Johnson.

S&F in repairs, brass CP toilet paper holder and fixed complete all as specified and directed.

S&F in repars, PVC waste pipe 750mm long suitable for 32 to 40 mm size waste coupling complete all as specified and directed.

S&F in repairs, brass chromium plated towel rail 600 mm long 20 mm dia fixed to wall with CP steel screws etc complete all as specified and directed.

S&F corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs, stainless steel jet cleaner for ‘E’ type WC with flexible pipe and fixed complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame, area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame, area exc 1.5 but n.exc 4.0 Sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1.00 Sqm each and refixing in the same opeining after repairing complete all as specified and directed.

Taking down shutters of any description not exce 1 Sqm and not exc 2 sqm each and refixing in the same opeining after repairing complete all as specified and directed.

S&F pressed steel door frame of size 125 x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and directed.

S&F pressed steel door frame of size 165 x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and directed.

S&F 2nd class hard wood plain solid, straight chowkhat and frame, rebated on the solid, rounded or chamfered put together with glue pinned at joint complete all as specified and directed .

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood 30mm thick glazed and skelton door shutters, divided into squares, open rebated and prepared to receive glass, gauge etc, edges of framing plain, chamfered, rounded fitted with mltred beads for securing glass etc, size of members as specified in SSR Part-I, Section 8, Clause 8.20 (a), supplied and fitted to chowkats complete all as specified and directed.

S&F 2nd class hardwood 30mm thick glazed and skelton window/ventilator shutters, divided into squares, open rebated and prepared to receive glass, gauge etc, edges of framing plain, chamfered, rounded fitted with mltred beads for securing glass etc, size of members as specified in SSR Part-I, Section 8, Clause 8.20 (b), supplied and fitted to chowkats complete all as specified and directed.

S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, supplying and fixing in opening as per specification and shown on drawing complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & shown on drawing complete all as specified and directed.

S&F steel windows with glazing bars, dovetailed or welded, locally manufactured with side hung shutters including projecting type hinges, steel handle and Steel peg stay complete all as specified and directed.

S&F steel windows without glazing bars, dovetailed or welded, locally manufactured with side hung shutters including projecting type hinges, steel handle and Steel peg stay complete all as specified and directed.

S&F steel ventilator with top hung shutter, locally manufactured including hinges, steel peg stay complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average size of aperature 1.18 mm, fixed with tinned tacks or galvanised wire staples

S&F in repairs, aluminium alloy wire mesh 0.56mm nominal dia of wire and width of aparture 1.18mm fixed with aluminium wire staples fixed to wood/steel frame complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from matel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones and S&F 3mm thick sheet glass, plain ordinary quality and glazing with oil putty/ wooden beads in squares n.exc 0.50 sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass, plain ordinary quality and glazing with oil putty/ wooden beads in squares n.exc 0.50 sqm in each pane complete all as specified and directed.

S&F floor door stopper aluminum alloy body anodized with hard drawn steel spring overall length 140mm and fixed complete all as specified and directed.

S&F 250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 100mm size butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 75mm size butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm size mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 125mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 150mm mild steel pressed handles, oval type, stove enamelled black and fixed complete all as specified and directed.

S&F 125mm size mild steel pressed handles, oval type, stove enamelled black and fixed complete all as specified and directed.

S&F in repairs, mild steel 300mm size ordinary rat tail including roller and roller plate and fixed complete all as specified and directd

S&F in repairs, stainless steel door stopper, single leg best quality with rubber shoe complete all as specified and directed.

S&F MS framed work such as grills, gratings with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, hold fast, framed balusters, walk ways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E165 complete all as specified and directed.

M&L in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified and directed.

S&F 40m dia cup board knobs fixed with brass polished nut, screw and washer complete all as specified and directed.

S&F 75mm size aluminum anodised hasp and staple safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F mild steel continuous (piano) hinge, bright finish or electrogalvanised, width of flap 40mm (when open) fixed to timber frame / shutter with screws complete all as specified and directed.

M&L for preparing new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparing old painted wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering including ridge of any description complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, fixed in any position complete all as specified and directed.

M&L for structural steel work as in tubular trusses / purlins / columns using ERW or induction butt welded tubes conforming to IS:1161- 1979 grade St.-240 with and including all nuts & bolts, base plate, special shaped washer etc complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L-type or J-type or cranked hook bolts including making good the dismantled portion of top of brick walls complete all as specified and as directed.

S&F 6mm thick two piece AC serrated ridges for corrugated sheet fixed with 'L' or 'J' type hooks or cranked hook bolts complete all as specified and as directed.

S&F 0.50mm thick pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour, having tensile strength of 550 Mpa, fixed with self tapping screws as in roof covering / cladding to wall, including making good the disturbed portion of top of brick wall complete all as specified and as directed.

M&L 0.50mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa, fixed with self tapping screws as in roof covering / cladding to wall complete all as specified and as directed.

S&F self adhesive flash strip 100mm wide suitable for packing of holes/ cracks of AC sheet complete all as specified and as directed.

S&F in repairs, HDPE PVC lid (cover) for 500/1000 Ltrs capacity PVC tank complete all as specified and directed.

S&F rubber door cill 40/50mm wide and 6mm thick as required in door cill with required nails etc complete all as specified and directed.

M&L for replacement of 2nd class hard wood straight wooden glazing beading of size n.exc 3 Sqcm in sectional area, finished wrought for fixing wire gauge/securing glass pane in glazed or gauged shutters complete all as specified and directed.

M&L for preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chromate primer complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M/S IRFAN AHMAD CONTRACTOR

M/S RAJESH ARORA

Alankar Traders

VINAYAK CONSTRUCTION COMPANY

AJAY KUMAR CONTRACTOR