SPECIAL REPAIR TO BLDG NO T30 AT STB D BEG AND CENTRE SPECIAL REPAIR TO BLDG NO P764 AND T22 AT 135 INF BDE ON ZONE C OF ROORKEE MILITARY STATION

Amount

Demolition of cement concrete (Un-reinforced) including stone slabs etc in ground floor and paving etc in n exc 15 cm Thick below or above

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20 mm graded aggregate) as in plinth protection, floor etc, finished even and smooth without using extra cemented.

M&L 25mm thick Cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in sub floor and leveling coarse etc.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles

M&L for brick work in CM 1:6 using Sub class ‘B’ Bricks straight or curved on plan exc 6 m mean radius complete all as specified

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each including necessary cutting holes and making good using PCC (1:2:4) Ty B-0.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each including necessary cutting holes and making good using PCC (1:2:4) Ty B-0..

S&F Powder coated anodised aluminium frame for doors, windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc. complete all as specified

Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F, Powder Coated aluminium door shutters, having top rail of size 101.60mm x 44.50mm, Middle rail of size 101.60mm x44.50mm , bottom rail of size 150.00mmx44.50mm and side vertical rail of size 83.50mmx44.50mm aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, 2 Nos powder coated handles 200mm long in each door,250mm long powder coated tower bolt, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F for Powder coated aluminum window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, 4mm thick plain glass with sun control film, Powder coated aluminium fittings such as peg stays min 150mm long (1 no.), hinges type B-21 100mm long (2 no.), suitable handle (1no.) and 150mm long tower bolt (2 No) in each shutter complete all as specified

S&F for Powder coated aluminium window and ventilator shutters, side hung type with sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, aluminium fittings such as peg stays minimum 150mm long (1 no.), hinges type B-21 100mm long (2 no.), suitable handle (1no) and150mm long tower bolt (2 No) in each shutter complete all as specified

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

S&F Anodised aluminium grill of 50x50x5mm size (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S& F 30mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F sheet glass 5.5 mm thick ordinary quality and glazing with neoprene beading to aluminium frame complete exc 0.5 sqm in each pane complete all as specified and directed.

M&L 18mm Pre-laminated particle board, interior grade, pre-laminated both side with decorative choice lamination fixed with screws to timber/ aluminum frame work complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of steel, other parts made of mild steel heavy duty and fixed (Make- 'SAMRAT' or equivalent suitable for door 60-80Kg.)

Taking down Shutters of any description exc 1 sq. m but not exc 2 Sqm each

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L Ultra charged vitrified Ceramic Light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M & L Non skid Ceramic Light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M & L for glazed ceramic colour joint free tiles in vertical surface size 450X 350X 7 mm/ 450x 300 x7mm/ 600x300mmx7mmthick as required set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Non - skid Ceramic joint free colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl molding of edges where required all as specified and directed.

Taking down cement plaster (including tiles) of any description on Brick walls including racking out Joints, hacking for key scrubbing down with water etc.

M&L for rendering 15 mm Thick in CM (1:6) on Brick surfaces, rendering is to be finished even and smooth (without using extra lime or cement) all as specified and directed.

M&L for rendering 15mm thick consisting of two coats, top layer 5 mm thick in CM 1:4 (mixed with WPC) over 10mm thick layer in CM 1:6, on fair faces of brick work ( WPC shall be measured & paid separately) finished even & fair all as specified.

Supply only Liquid water proofing compound

M&L for complete removal of existing treatment on surfaces of walls/ceilings by scrapping down with mechanical grinder on old walls as per the specification of manufacturers instructions of paints/OBD including applying with 2 coats of oil bound distemper over a coat of 2mm thick putty on wall,complete all as specified and directed.

M&L for complete removal of existing treatment on surfaces of walls/ceilings by scrapping down with mechanical grinder on old walls as per the specification of manufacturers instructions of paints including applying with 2 coat of all weather paint over a coat of primer over a coat of 2mm thick wall care putty complete all as specified and directed .

M&L preparation of newly or old treated plastered surfaces of walls and finishing walls 2 coat of all weather paint over a coat of primer over a coat of 2mm thick wall care putty complete all as specified and directed .

M&L preparation of newly or old treated plastered surfaces of walls applying with 2 coat of oil bound distemper over a coat of 2mm thick putty on wall,complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer.

M&L for rolled mild steel Joist, channel, angle,tubes or tee sections, fixed independently, without connecting plates, etc. Fe-410-W (Gde E-250)

M&L preparation new steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as spfd.

S & F in repairs of 25 mm dia mild steel covered with PVC Sleeves complete fancy type curtain rod with and including mild steel matching to colour fancy type brackets, stops, of suitable size & side caps etc. complete all as specified and directed Make: Locally available Ist class quality.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

S&F 15mm bore GI steel tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors incl necessary cutting chases in wall/ floor, complete all as specified and directed.

Ditto but 20mm bore

S&F in repair for angle valves,stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed suitable for 15mm bore pipe.Make : Cera F-1003201, Pearl BRE-1012, Prayag SKU 9818.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15mm bore. Make : Cera F-1003103, Pearl BRE -1013, Prayag SKU 8204.

S&F in repair Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, waste coupling. urinal spreader and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe. Make : Cera Capriana, Eauset 'WDN2201SW' or equivalents

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make : Cera "F-8030105 AB", JAQUAR (ALD-CHR 565), Eauset ' SKU-CHF305' .

S&F in repair ,dual action type, PVC flushing cistern of 8Ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe Make : Pearl "EDGE PLUS C-009/IV ", JAQUAR (JAH-WHT-184NBTL), CERA (COMPASS B-1010111)

S&F PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S&F for Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe)including necessary 'P' or 'S' trap with white seat cover Make : Cera "S-1053101", JOHNSON ( RUBY-P0447PW0101), Eauset ' SKU-CHF305' .

S&F for Vitreous china premium/ 1st quality, white colour one piece Ove toilet integrates the tank and bowl into a seamless design with duel flush, with seat cover and necessary fittings complete in all respect all as specified. Make:- KOHLER OVE , CERA (CORIUM 220)

S&F vitreous china wash basin , white, Oval type, excluding taps, chain and plug and porcelain stopper but including waste coupling, brackets including cutting and pinning in ends of brackets or erecting stand . CERA (CLAIR 52030101), EAUSET 'WVE0601SW', JOHNSON(Compact VB-P4412PW0301)

S&F Flush pipe of polyethylene of high density or PVC. 32 mm dia,

S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. Make JAQUAR ' AHS-CHR-155', CERA(F5006110) or equivalent.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long Complete all as specified and directed

S &F chromium plated fancy type 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F for Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

S & F 150 mm size extruded aluminium alloy handles, fabricated type, anodised

S&F for 300mm long Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F 200mmMild steel, semi-barrel tower bolt, open cover, with sheet pressed barrel, stove enameled black with bright bolt and fixed

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed

S & F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack/galvanised wire staple complete all as specified and directed. (ISI Marked)

S&F for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F for 110mm bore PVC (SWR) bends any radius

S&F for 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F for 75mm bore PVC (SWR) bends any radius

S&F PVC (SWR) floor trap, plain with grating cover including jointing with solvent cement complete all as specified and directed.

Dismantling water tanks of 500 Ltr capacity and removing to store

M&L 500 ltrs Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve (Ball valve make:- Prayag) and tank nipples etc, hoisted and fixed in position all as specified in SSR Part I.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Ditto but 15mm bore

S&F in repair designer ceiling boards of size 600x600x4mm thick with and including GI framed work using main 'T' of size 24x38.5 mm and cross 'T' of size 24X28x0.5 mm made out of 0.30mm thick PGI sheet, doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24x24x0.4 mm covered with powder coated sheet 0.25mm thick for ceiling, suspended with 3mm dia GI wire upto 2 mtr length including plugging in brick walls with mild steel rawl plugs @ 600mm C/C complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete as specified and directed by Engr-in-Charge

S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete as specified and directed by Engr-in-Charge

Dismantling timber fillets, posts, Rafter, purlins etc. under 40 sq cm in section complete as specified and directed by Engr-in-Charge

S&F rolled mild steel in joist, channel, angle or tee sections fixed independently , without connecting plates etc quality conforming to Fe 410 W (Gde E-50 quality A) complete as specified and directed by Engr-in-Charge

M&L for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design ( Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, and Dismantling wall and ceiling board (fibre, pulp , insulation etc) or insulation boards/ slabs any thickness all complete at all heights as per directions of EIC.

M&L for rendering 15 mm thick in CM (1:6) on brick or concrete surfaces other than fair face of brick work without using extra cement complete all as specified and directed.

M&L cement concrete TypeB0 1:2:4 (12.5mm graded) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including demolition of Concrete in ground floors and pavings n exc 15 cm in thickness (Below or above the ground Level) as directed

Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

-Ditto- but n.exc 1.5m2 each -ditto-.

S & F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S & F 30 mm thick flush shutters, Factory Made solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F 35mm thick IInd class hard wood glazed skelton shutters Factory Made open rebated and prepared to receive glass,guage etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat.

S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door.

S&F 150mm ordinary helical door spring incl. roller and roller plate "make : Ritz."

S&F butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed.

S&F butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed.

S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 250mm long alumn. alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section all as specified

S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter incl hinges, steel peg stay complete

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed by wooden beads or fixed in steel windows by screws complete all as specified and as directed by Engineer in Charge.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified

S&F of 10mm thick ETHOS Laminated wooden flooring ,classification of use 32/23 with a surface abrasion resistance of class AC4 ( average 4500 cycles ), impact resistance of class IC2 , resistance to cigaratte burn with a rating of 5(EN 438-2:05),swelling after 24hrs in warm water is less than 12% , modulus of rupture of 53.3 newton/mm2 , internal bond 1.78 newton /mm2 , surface soundless 1.01 newton/mm2(EN 13329:2000) with a 0.2 mm thick wear layer on top of a high density fiber substrate core ( density ~948.30 kgs/M3) of plank size finish will be embossed in register (EIR) or hand sculpted (HS) . underlayment for laminate flooring made of natural color foam. laminated flooring comes with accessories like end profile , transition profile , reducer , stair nosing and T profile , complete all as specified and directed. Make- Armsrong /Mapple wooden flooring.

M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over 1 mm thick wall care putty complete all as specified & directed.

M & L for new plastered surface on walls and applying two coats cement based paint over one coat of alkali resistant priming paint complete.( Make : Snowsem/Durocem/Crimocem)

M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying two coats of cement base paint complete all as specified and directed. Make : Asian Paint/Berger.

M&L for complete removal of existing treatment on wall of any description over 10 cm girth or width incl preparation of old surface and applying two coat weather coat over a coat over primer complete all as spfd & directed by Engr-in-charge.

Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified

Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :- One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .

All as per item No 4 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS cable as earthwire complete all specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way , 230 volts, 50 hz complete all as specified & directed.

S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz all as specified and directed

S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

M&L bell push AC, SP 240 volts flush type 5/6 Amps, 230 volts, 50 hz complete all as specified and directed.

S&F bell ding dong elelctric 230V AC single pole all as speccified and directed.

S&F fan regulator socket type, fulsh stepped type ,electronic ,450 watt complete all as specified and directed.

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as speccified and directed

Supply and fix in replacement of modular MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified. Make : Havells/Indoasian/L&T/Indoasian

Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately. Make: Legrand / Schineder / Seimen/Havells/Indoasian

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed.

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply and fix MCCB 160A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed. Make: Legrand / Schineder / Seimen/Havells/Indoasian

S&F LED batten tube light fitting 36 watts 4 fts with aluminium housing, translucent diffuser with LED light source , 3600-4000 lumen, natural white ,surge protection range- 2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

S&F LED mirror light 10 watts 2 fts extruded polycarbonate housing, translucent diffuser with LED light source , 2000 lumen, natural white ,surge protection range- 2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

Supply and fix in replacement of recessed mounted LED panel light 2'x2' size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix LED 25 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver,including bracket clamp and fixing accessories complete with electronic driver and all accessories. The fitting shall IP 66 protection, duly prewired complete all as specified and directed.

Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed

Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed

S&F in replacement Bus-bar chamber factory made out door type made out of 3mm thick CRCA sheet with canopy of size 700mm x 450mm x 300mm pedestal type with 200 Amps rated insulated bus bar TPN system & with One No of MCCB 200 Amp 25 kA pole MCCB as incomer and provision for 04 Nos MCCBs outgoing complete complete all as specified and directed.

S&F in replacement of unserviceable off load changeover switch four pole with sheet metal enclosure 200 Amps current rating mounted on wall, including connecting all incoming and out going electrical connections complete all as specified and directed . Make: : Havells /Indoasian/L&T

Supplying, laying, commisioning and testing of 1.1 KV grade XLPE insulated PVC sheathed, steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 70 sqmm 3.5 core complete all as specifed and directed. Note:- The earth work, GI pipe shall be measured and paid sepretely under appropriate item of Sch A

Excavation in trenches in hard/dense soil n.exc 1.5 m wide and n.exc 1.5 m in depth for poles,laying under ground electric cable and GI tubing (where provided for protection of cables), stay and getting out, trimming the sides, forming bottom surface to required level in any type of soil complete all specified and directed.

Returning , filling in, any type of soil including spreading, leveling, watering and well ramming in layers n.exc 250mm thick, in any tupe of soil complete all as specified and directed.

Removing excavated material (surplus soil) to a distance not exceeding 50m and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.

M&L for sand cushioning for under ground cable with layer of fine river dry sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. Note:- Punned (consolidated ) thickness of sand will be measured and paid.

M&L for well brunt bricks sub class 'B' in old size as cable protection laid flat width wise complete all as specified and directed.

S&F on trench/wall GI tubing light grade of dia 50 mm for cable protection complete all as specified and directed.

Supply and fix in replacement of ventilating / PVC exhaust fans fancy square type 225mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed. Note: Old unserviceable ventilation fan to be deposited to MES store Yard

Taking down ceiling fan any type and any sweep by disconnecting electrical connection & refixing the same after painting with synthetic enemel paint by spraying including filling cavities with filler and applying another coat after after cleaning all dust etc writing MES no 3.0 cm height and hanging ceiling fan and connecting upto including provision of cable from ceiling rose to fan complete all as specified.

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed,CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 30 kg/pit(resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7.The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including light grade GI pipe of size 15 mm upto 7 mtr incl cutting and chases on wall and floor and making good using PCC work complete all as specified and directed. Note: Rate quoted above are including of excavation work and refiliing of soil around earth rod and removal of surplus soil upto 50 meter.

Taking down AC from existing location and shifting of split//window AC of any capacity 1.5/2 Ton and pumped down the refrigerant gas from the AC, if the gas is required to make the system serviceable at re location and to assemble with necessary cutting drilling and plywork as required and finishing the disturbed surface and making good the same has been deemed to be included in this item. Extra payment is not admissable against the same.

S&F fan regulator socket type, fulsh stepped type ,electronic ,450 watt complete all as specified and directed.

S & F in replacement of old unserviceable LED highbay light fitting of 80watt capacity of IP66 with SMD LED pressure die-cast metal body housing with reflactor including making electrical connection from ceiling rose to light fitting complete all as per specified Make: Crompton Cat pat No LHB11-80-CDL/60-M equivalent in Havells/Wipro/philips Note for Item No 23 :- The Quoted rate is deemed to be included for installation of light fitting at any height including necessary T & P and safety equipments.

Taking down old unserviceable light fittings of any description and S&F building security light 30Watt,IP66 LED street light with aluminium pressure die cast housing including brackets made out of 40mm dia GI pipe light grade,bend to shape incliding 02 Nos flat iron clamps, nut & bolts and connection complete all as specified and directed

Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed

all as per item No. 41 above but for exhaust fan of any size and sweep

Supply and fix in replacement of ventilating/PVC exhaust fan 225/250mm sweep with plastic fiber heavy duty 230volt AC single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed

Taking down existing unserviceable service cable of any description & Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with XLPE insulated multistranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed 25sqmm nominal cross section,4core in service connections as per IS 7098(Part1) including connecting on LT OH line/LT panel/DB with suitable lugs,glands,binding wire etc complete all as specified and directed

S & F GI Pipe light grade of bore size 50 mm for cable protection complete all as specified and directed.

M& L for cutting the existing floor/roads for laying of cable/Gi pipe and making good the disturbed surface with PCC 1:2:4 type B1 (using 20 mm stone aggreagate) complete all as specified and directed.

M&L for laying bricks in protection covers cables using sub class B old size bricks complete all as specified and directed

Note: for item No. 142 (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.both way for cover and 40 x40x 6mm MS frame etc., complete all as specified.

VIMAL CONSTRUCTION CO

M/S AJIT CONSTRUCTION CO

RAJENDER CONSTRUCTION CO

M/S MSD & Associate

M/S A.K GARG

G.H. INFRASTRUCTURE PRIVATE LIMITED