PROV OF PARKING SHED AT SMQ AREA, STN HQ AND AIRMEN MESS, PROV OF SHED FOR OXYGEN PIPELINE DISTRIBUTION SYSTEM AND PATIENT WAITING AREA AT SMC, PROVN OF IRON GRILL GATES, DOORS AND WINDOWS AND MISC WORK AT BLDG NO P 196 AND P 81 AT MTABU

Amount

Excavation in post holes in soft/disintegrated rock each n exc 0.50cum getting out,returning in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface.

M&L for Cement concrete 1:2:4 type B1 (20mm graded aggregate ) as in wall or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundry pillars and posts and mass concrete.

S&F for steel work in tubular tresses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998. St -240. complete all as specified and as directed.

S&F Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc.

S&F Fe 410W (Gde E-250) quality A for mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment to bottom and top of pipe complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete.

S&F for Pre painted galvalume aluminium zinc coating GI based coorugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

Surface dressing soft/loose sil n.exc 15cm deep complete all as specified and directed

Excavataion in trenches width not exceeding 1.5mtr and depth not exceeding 1.5metre for foundations, not exceeding 10 Sqm on plan for manholes etc and getting out in soft/disintegrated rock, complete all as specified.

Returning filling in soft/disintegrated rock including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified.

Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregates) as in foundation mass concrete filling complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces cement plaster 1:6 all as specified and directed.

M&L for applying two coats of cement based paint on wall surfaces including preparation of surface complete all as specified and as directed.

M& L for sand filling under floors or in coushion for interlocking paver blocks all as specified and as directed by Engr-in-charge.

S & F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 with grey cement and pigment of 80mm thickness, M-40 grade. Complete all as specified and as directed.

PCC 1:3:6 type C1 using 20mm graded aggregate incl form work for coping/benching, weathering, slightly rounded or chamfered angle and throating all as specified and as directed by Engineer – in – Charge.

M & L for excavating in post holes or similar work each n exc 0.50cum in hard dense soil getting out and returning and ramming including watering etc and removing surplus soil to a distance n exc 50m and making good surface in soft/ loose soil.

M &L for cement concrete type C2 1:3:6 (40mm graded stone aggregate ) as in posts all as specified and as directed.

S& F Joist channel angle, tee section , MS pipe, MS square tube bars, MS plate fixed in purlin rafter cleat, support etc incl welding , riveting etc conf to Fe-290 Gde E-165 all directed by Engr- in-Charge

M& L for preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

S&F for Pre painted galvalume aluminium zinc coating GI based coorugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

M &L for PCC 1:2:4 type B1 using 20mm graded stone aggregate 40mm thick all specified and as directed by Engr-in-Charge.

M & L for coloured printed ceramic tiles area of each exceeding exc 0.18 sqm but n exc 0.38 sqm in floors etc set and jointed with neat cement slurry pointed with colour cement to match the floor, and including 15mm thick screed bed cement complete all as specified and directed .

M&L for Rendering 15mm thick cement mortar on stone masonary surfaces or surfaces other than fair faces of brick work in cement mortar 1:4 as backing coat to glazed tiles complete all as specified and directed.

M&L for digital glazed ceramic tiles coloured size 450x350x7mm/350x250x7mm thick as on vertical surfaces of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed.

Excavating in trenches for gard dense n exc 1.5m wide and n exc 1.5 m in depth for foundation etc or for shafts wells, cesspits manholes pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out complete all as specified and directed.

Removing of excavated material n exc 50mtr and depositing where directed at a level n exc 1.5m above the statring point.

Returning filling in including spreading levelling watering & well ramming in layers n exc 25cm in hard/ dense soil. Complte all as specified and directed.

M & L for providing PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed by Engr-in Charge

M & L brick work using sub class 'B' bricks curved or straight in plan exc 6 mtr mean radius in CM (1:6) complete all as specified and directed.

M& L providing pre cast cement concrete louvers and jallies 50mm thick including pre cast RCC pillar type B-0 1:3:6 (12.5mm graded stone aggregate) and set in cement mortar 1:6 all as specified and directed.

M &L 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B1, using 20mm graded stone aggregate as in coping complete all as specified and directed.

M&L for two coats of cement base paint on new plastered surfaces of walls over a coat of alkali resistant priming paint all as specified.

Supply and fixing ceiling fan regulator electronic rotary step type complete all as specified Make :Anchor/Roma/Havells/Cona

Supply and fix Wall Mounted fan of 400mm 240 volt Make: Bajaj, Havells, Crompton.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor with non metalic rigid PVC medium duty casing 'N' caping directed of suitable size with all fitings and accessories including factory made MS/ pressed steel terminal box with zinc coated duly concealed in wall for mounting switches, sockets fan regulators etc and 3 mm thick plastic laminated sheet top cover including continuous earth wire PVC insulated 1.50 Sq mm copper multistranded conductor connecting to common earth and earth dolly complete all as specified :-

(a) For one light point controlled by one switch

b)For one fan point controlled by one switch through regulator

Supply and fix LED tube light fitting, 1 x 18 W, Box type,energy saving recess/surface mounted luminaire high efficiency PMMA diffuser gives soft glare free light. make:- Crompton,Havells, Philips

M & L for PCC 1:3:6 type C2 (40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

S& F Framed work such as grills, gratings etc with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders,framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0or Fe-310-0 complete all as specified and directed.

M& L for preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

M & L Providing precast cement concrete louvers and jallies 50mm thick including precast RCC piller type B-0 1:3:6 (12.5mm graded aggregate and set in cement mortar 1:6 all as specified and directed by Engr-in- Charge.

M & L 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type-B1, using 20mm graded stone aggregates as in coping all as specified and as directed.

M& L for two coats of cement base paint on new plastered surfaces of walls over a coat of alkali resistant priming paint all as specified and directed.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor with non metalic rigid PVC medium duty casing 'N' caping directed of suitable size with all fitings and accessories including factory made MS/ pressed steel terminal box with zinc coated duly concealed in wall for mounting switches, sockets fan regulators etc and 3 mm thick plastic laminated sheet top cover including continuous earth wire PVC insulated 1.50 Sq mm copper multistranded conductor connecting to common earth and earth dolly complete all as specified :-

(a) For one light point controlled by one switch

b)For one fan point controlled by one switch through regulator

Supply and fix LED tube light fitting, 1 x 18 W, Box type,energy saving recess/surface mounted luminaire high efficiency PMMA diffuser gives soft glare free light. make:- Crompton,Havells, Philips

Supply and fix Exhaust fan of 250 mm 240 volt Make: Bajaj, Havells, Crompton.

boon construction company