Additional accommodation of Govt. Senior Secondary School building at Dehan in Tehsil Palampur Distt. Kangra (SH- Providing EI therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1200 mm sweep, Category-A

Makes:-Havells, Philips, Panasonic , GE, (at par with Panasonic cat no. 14000iv)

Providing and installation of following type of Surface mounting slim Round type LED Downlight luminaire 1800 lumens CCT(K)- 5700 with spectfcations i.e. Power factor > 0.9 , Harmonic dlstortion < 10% and efftcacy > 100 tumens per watt, CRL>80. sultable for lnput voltage AC 220-240v ,50/60 HZ omplete with all accesseries,including connections,testing and commissioning etc.as required complete in all respects

18 Watt , Round Surface LED-

Makes:-C&S, Panasonic , Wipro, {at par with C& S Cat No. LTCSP18WLED1x1}

Providing and installation of following type of Surface mounting slim Square Type LED Downlight luminaire 3400 lumens CCT(K)- 5700 with spectfcations i.e. Power factor > 0.9 , Harmonic dlstortion <10% and efftcacy > 100 tumens per watt, CRL>80. sultable for lnput voltage AC 220-240v ,50/60 HZ omplete with all accesseries,including connections,testing and commissioning etc.as required complete in all respects

surface Mounting ( 36Watt) (2x2)-

Makes:-C&S, Panasonic , Wipro, {at par with C& S Cat No. LTCSP36WLED 2x2}

Providing and fixing slim decorative extruded box fixture with LED driver snap on installers,having protection circuitof 3kw and aluminium heat sink,suitable for LED upto 40 watt with lumen output of 100 lumens per watt complete with all accessories, connections,testing and commisioning etc. as required complete in all respects

LED Batten ( 20Watt)

Makes:-Havells, Philips, Panasonic , GE, {at par with Jaquar cat no. LTTB4F20WLED/W)

Providing and fixing LED Bulk Head Light following rating with pressure die casting aluminium housing complete with all accesseries,including connections,testing and commissioning etc.as required complete in all respects.

10 Watt ,Bulk Head LED

Makes:-Havells, C&S, Philips , GE, {at par with Havells cat no.LHEOAOP7UZ6W010 }or equivalent make

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x2.5 Sq. mm.

2x10 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

PVC insulated HRFR LS Copper conductor 2.5 Sq. mm.

3x2.5 Sq. mm.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

Earthing with G.I. earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-12 way

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-

300 mm deep (nominal)

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing voltameter,Ammeter,ASS+VES C.T. ,Indicator as required complete in all respects.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

100 Amp. -10 KA

Providing and errection of LED 45 watt Street light luminaries of C&S Electric make having Cat No:/ordering code INDUS-i/45W/ LTESSI45WLED, powder coated pressure die-cast aluminium SMDLED Street light with heat resistant toughened glass including connections, testing and commisioning etc. as required.Make: C&S, Philips, Havells, Panasonic or any other approved by Engineer-in-Charge.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

50 mm. dia