Tender for ARC work of Erection & Maintenance of HT, LT, & TC work at 66 KV Jolva S/S area andvarious villages under Kadodara-2 S/dn under KADODARA Division for Various scheme work.

CAPITAL WORK LABOUR RATES FOR FY 2025-26 (WITHOUT GST)

Sr. No. Item Code Item Unit Rate

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS

ARMS, CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS

1 9926000001 ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS AND No.

NUMBERING COMPLETE WITH COST OF PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

2 9926000002 FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST No.

OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF

PIT AND REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS

ANTI- CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC.

3 9926000003 COMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS USED ON No.

THE POLEAND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING ON

BG/MG/NG LINE FOR 0.400/11/22KV OVERHEAD LINES I.E INCLUDING

EXCAVATION OF PIT & REFILLING OF EARTH, FIXING CROSS ARMS, TOP

FITTING CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARD, INSULATORS

ETC. COMPLETE AND PAINTING OF STEEL POLES, FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC POLES

INCLUDING EXCAVATION OF PITS & REFILLING OF EARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING DEVICES

DANGER BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.(WITHOUT AB

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.STEEL POLE

INCLUDING EXCAVATION OF PITS & REFILLING OFEARTH, FIXING OF

CHANNELS, SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING DEVICES

DANGER BOARDS, INSULATORS ETC.COMPLETE & PAINTING OF

POLES,FABRICATED MATERIALSUSED ON THE POLES AND NUMBERING

WITH COST OF PAINTSAS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,

HG FUSES OF 8 MTRS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS

AND REFILLING OF EARTH,FIXING OF CHANNELS SUPPORTING ANGLES,

CLAMPS, ANTI- CLIMBING DEVICES, DANGER BOARDS,

7 9926000007 INSULATORS,DOFUSES ETC. COMPLETE AND PAINTING OF FABRICATED No.

MATERIALS USED ON THE POLES AND NUMBERING WITH COSTOF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDINGOF ERECTION OF GUY SET

AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES, 9 TO 11 METERS STEEL POLES INCLUDING EXCAVATION

OF PITS AND REFILLING OF EARTH, FIXING OFCHANNEL, SUPPORTING

ANGLES, CLAMPS, ANTI- CLIMBING DEVICES , DANGER BOARDS,

8 9926000008 INSULATORS, ETC. COMPLETE AND PAINTING OF POLES FABRICATED No.

MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH,

HG FUSES, TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION

BOX. OF 8 METER,200KG PSC POLE METERS POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING

DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USEDON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTH CARTING OF TRANSFORMERS FROM

STORE TO SITE, FIXINGOF CHANNELS SUPPORTING ANGLES, BRACING, CROSS

ARMS,CLAMPS, ANTICLIMBING DEVICES, DANGER

BOARDS,CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND PAINTING

OF POLES FABRICATED MATERIALS USED ON THE POLES AND NUMBERING AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY

SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTH AS PER STANDARD SPECIFICATION WITH STAY CLAMPS, STAY WIRE,

ANCHOR ROD, TURN BUCKLE, EYEBOLT, GUY INSULATOR, CEMENT

CONCRETE BLOCK ETC. BUT EXCLUDING CONCRETING.

9926000012 CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT SAND CMT

12 METAL (1:2:4) AND WATER ETC. AS PER STANDARD SPECIFICATION.(cement

Should be 53 grade) used for Concreting.

9926000013 ERECTION OF COIL TYPE EARTHING INCLUDING COST OF COAL,SALT ETC. BUT No.

13 WITHOUT COST OF GI WIRE AS PER STANDARD SPECIFICATION(20kg solt+20kg

9926000014 ERECTION OF GI PIPE/CI PLATE TYPE EARTHING INCLUDINGCOST OF COAL No.

SALT ETC. BUT WITHOUT COST OF PIPE/GIPLATE GI WIRE AS PER

SPECIFICATION.(20kg solt+20kg coal)

9926000015 ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS, BRASS No.

15 NIPPLE, BRASS HOLDER TECK WOOD BUSH,REFLECTORS FUSE, WIRING ETC.

AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

9926000016 STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA CONDUCTOR for ALL TYPE ONE COND PER KM

16 OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT LINES

INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC.

17 9926000017 STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING ETC. DO

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4MM2

TWIN CORE CABLE FROM TERMINAL POLE TO METERING POINT INCLUDING

FIXING OF METER WITH METER EARTHING COMPLETE WORK AS PER

STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH PVC

4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL POLE TO METERING

19 9926000019 POINT INCLUDING FIXING OF METER WITH METER EARTHING COMPLETE No.

WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF

9926000020 ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA FOR No.

ERECTION OF POLE/ GUY ETC. AS PER STANDARD SPECIFICATION OVER &

20 ABOVE NORMAL COST COVERED AGAINST EXCAVATION OF PIT UNDER

NORMAL SOIL FOR ERECTION OF POLE,GUY, DOUBLE POLE STRUCTURE

EARTHING WITH THE APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

25 9926000025 Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING,HT LINE No.

CROSSING AND TELEPHONE LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING ARRESTOR, DISTRIBUTION BOX. ON

8 METERS 200 KGAND PSC POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO

SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS

CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND

CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS, LIGHTENINGARRESTOR, DISTRIBUTION BOX.

ON 9 to 11 METERS RSJ POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO

SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS

27 9926000027 CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND No.

CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG PSC

POLES INCLUDING EXCAVATION OF PITS & REFILLING OF EARTHING, FIXING

OF CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING DEVICES

29 9926000029 DANGER BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.(WITHOUT AB SWITCH)

30 9926000030 STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR 11/22KV & LT ONE COND PER KM

LINES INCLUDING FIXING OFINSULATORS, BINDING JUMPERING ETC.

31 9926000031 STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES INCLUDING FIXING ONE COND PER KM

OF INSULATORS, BINDING JUMPERING ETC.

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB

SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS 270 KGAND PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTI-CLIMBING

DEVICES,DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

9926000033 DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT No.

STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

9926000034 DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF FABRICATION No.

AT STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITH

TRANSFORMER) WITH CREDITING OF FABRICATION & TRANSFORMER AT

35 9926000035 STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO No.

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITHOUT

TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE & STACKING

36 9926000036 OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE No.

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING FITTING OF

ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF

MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL

37 9926000037 BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH SERVICE KM

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION

CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING

OF MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL

38 9926000038 BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH SERVICE KM

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING FITTING OF

ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

39 9926000039 FIXING OF CROSS ARM, BINDING TO PIN INSULATOR,PREPARING SHACKLE KM

POINT,JUMPERS ETC. AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING FITTING

OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

40 9926000040 FIXING OF CROSS ARM, BINDING TO PIN INSULATOR,PREPARING SHACKLE KM

POINT,JUMPERS ETC. AS REQUIRED AND DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION

CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING

OF MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN

9926000042 DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE OLD No.

42 MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC

POLE(WITHOUT TRANSFORMER) WITH CREDITING OF FABRICATION AT

43 9926000043 STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO No.

DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC

POLE(WITH TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE

44 9926000044 AND STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO No.

DEPARTMENTAL STORE

9926000045 DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND CREDITING KM

45 FITTING OF ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND CREDITING

46 9926000046 FITTING OF ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE KM

9926000047 DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND CREDITING KM

FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

9926000048 DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM AND KM

48 CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

9926000049 DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM AND KM

49 CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

9926000050 RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR ONE COND PER KM

11/22KV & LT LINES INCLUDING FIXING OF INSULATORS, BINDING JUMPERING

9926000051 RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING , ONE COND PER KM

51 BINDING JUMPERING ETC.

9926000052 LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER. (METER WILL No.

52 BE PROVIDED BY DGVCL)

9926000053 LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND OLD METER No.

SHOULD BE CREDITED TO SDN STORE. (METER WILL BE PROVIDED BY DGVCL)

9926000054 LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER CONNECTION. ( PER CT

54 CT COIL WILL BE PROVIDED BY DGVCL )

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER

CONNECTION AND OLD CT SHOULD BE CREDITED TO SDN STORE. (CT COIL

55 9926000055 WILL BE PROVIDED BY DGVCL) PER CT

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB WILL BE

56 9926000056 PROVIDED BY DGVCL) No.

9926000057 LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX. (METER WILL BE No.

PROVIDED BY DGVCL)

9926000058 PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER CABLE 3.5 METER No.

58 (CABLE TO BE PROVIDED BY AGENCY)

9926000059 LABOUR CHARGE FOR PROVIDING/RECONNECTION OF TERMINAL PER TERMINA TION

CONNECTION WITH PROPER SIZE OF LUGS. (LUGS COST IS BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL

SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF

AGENCY IN PRO- FORMA REPORT SHOULD BE SUBMITTED TO SDN OFFICE.

60 9926000060 (* ONLY IF ALL PARAMETER OF VOLTAGE, CURRENT & LOAD AS SHOWN IN PER DTR

PER-FORMA IS FILLED) AS PER THE INSTRUCTION OF ENGINEER INCHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL

SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF

AGENCY IN PRO- FORMA REPORT SHOULD BE SUBMITTED TO SDN OFFICE.

61 9926000061 (DULY FILL PER-FORMA IN FAULT CONDITION IN WHICH READING PER DTR

PARAMETER IS NOT SHOWN IN METER)

9926000062 INSTALLATION OF DTR METER INCLUDING METER BOX, PROVIDING & No.

FIXING OF 1.5SQ MM SINGLE STRAND 10 CORE ARMOURED COPPER CABLE

(3.5METER), TERMINATION IN METER & COIL ETC.(METER, METER BOX,

C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

9926000063 INSTALLATION OF DTR METER INCLUDING METER BOX, TERMINATION IN No.

METER & COIL ETC. (WITHOUT 10CORE COPPER CABLE) (METER, METER

63 BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

Supply and Installation of 11/22 kV Distribution Transformers HT Terminal protector (UV

Resistance) with using 95/120/150 sq.mm long barrel aluminum lug. (1Set = 3 Nos i.e. on R,

Supply & Installation of HT EPR Tap on 11/22 kV Distribution Transformer with

replacement of bare conductor by HT ABC conductor (DO bottom side to transformer) after

65 9926000087 removal of semi conductor by HT ABC (6 inch both side). HT ABC to be supplied by PER SET

DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready

Capsule, Pipe-In- Cage (Pic) Type, Earth Electrodes for HT Feeder Pole Having

66 9926000088 2000 mm Electrode Length as per the Tender Specifications and Drawing. (All Materials Will NO

Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready

Capsule, Pipe-In- Cage (Pic) Type, Earth Electrodes for HT Feeder Pole Having

67 9926000089 3000 mm Electrode Length as per the Tender Specifications And Drawing. (All Materials NO

Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot dip- galvanized-zinc coating of 80-

100 microns without any joints or welding. Both the end of the GI strip should be connected

with GI nut bolts and required fabrication work for giving separate earthing connections to

(1) Neutral of the transformer

(2) MS structures of the transformer center (Approximately 25 meter GI strip per transformer

68 9926000090 centre Meter

- as per requirement and instruction of Engineer in- charge) (All Materials will be supplied

Supply and Installation of uPVC standard make Pipe of 1.25" diameter for covering GI strip

with UV protected Cable Ties of 550 X 7.6 mm size to bind with pole face(Approximately

69 9926000092 meter uPVC pipe for GI strip covering per transformer centre - as per requirement and Meter

instruction of Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out

fuse to Transformer H.T. including Busbar (12 mm sleev) as per technical specification. (All

70 9926000093 Materials will be supplied by Agency) Meter

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out

fuse to Transformer H.T. including Busbar(15 mm sleev) as per technical specification. (All

71 9926000094 Materials will be supplied by Agency) Meter

Supply & fixing of Disc type Red Color FRP(Non-flammable) material with Weather

resistant, Non-conductive bird guard OD=300 MM, ID=33 MM, Width =1.25 MM, one side

72 9926000095 cut from ID to OD. (All Materials will be supplied by Agency) NO

9926000096 Providing and fixing of LT Terminal protectors i.e. Re-useable boot (LT Side 1.1 kV) No

73 including LT (1.1 kV) insulating taps. All live part at LT side shall be covered with fixing of

LT insulating taps.

74 Nylon Net around Transformer Center

75 9926000097 Nylon Net (12 * 15 ft) Per Net

76 9926000098 Nylon Dori Per TC

77 9926000099 Labour charge for fitting Nylon Net (All fabricated material for fitting nylon net shall be Per TC

provided by DGVCL)

Providing and fixing of insulating bus bar, made from 11KV/22KV XLPE

cable after removal of semi conducting layer and applying of PVC heat

shrinkable anti- tracking core insulating tubing (1.1KV), on both end terminal

using Aluminium long barrel heavy duty up to 240 sq mm lugs, Aluminium

bus connector. Taping with PG- clamp for bus conductor as per drawing and

as per instruction of EIC. The Alluminium lugs and PG clamp shall be

covered with 11KV/22KV HT insulating tapes.(11KV/22KV XLPE cable will

be in scope of DGVCL while all other materials will be in bidder's scope)

Testing of cable at various points and commissioning the feeder as per

127 9925000025 instruction of engineer-in-charge.Test result shall be submitted by contractor No.

Supply & fixing of heat shrink type end terminations (outdoor) for 11kV 3C x

240 mm2 size XLPE cable as per DGVCL technical specification

129 9924000047 Plumbing of PSC Pole with straightening at tension point No.

130 9924000048 Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of stone Murrum etc. No.

131 9924000049 Providing new 11kv AB /GO switch with fabrication and insulated colour code jumper, Set

binding, lugs etc

132 9924000051 Replacement of old 11kv AB /GO switch with providing new insulated jumper, binding, Set

133 9924000052 Providing cage type loop guard in verticle LT line with using PVC reel insulators etc per pole

134 9924000053 Labour charges for replacement /providing of MMB & service with all accessories for three No.

phase connection

135 9924000054 Labour charges for replacement /providing of MMB & service with all accessories for No.

single phase connection

136 9924000055 Dismentalling of existing Dist.X'mer center(RSJ /STP POLE) 25/63/100/200 KVA with all No.

fabrication & creditig the old material to store

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe

with pit to be filled with salt & coke and construction of chamber as per

137 9925000016 DGVCL Drg. No. dg /100 for DP and cable. The earthing pit should be joined No.

with cable by G.I. strip of size 1” width & 2 mm thick. All material GI pipe,

Coke, Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for upto 11kV

3C x 185 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (outdoor) for upto

3C x 185 mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat shrink type end terminations (indoor) for upto

11kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical specification)

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in length) with salt and coal

10kg each, including pvc rigid pipe 20mm dia( 1.5mtr length) to pass exposed part of G.I.

141 9924000064 wire at consumer end with all materials, earth resistance should be less than 2 ohms No.

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all acessaries

i.e. special design suspension / tension clamp, fixing of cross arm, LT shackle insulator etc.

for fixing of messenger wire and inclusive of dismantling charge of existing bare conductor

142 9924000065 and crediting in to store & dismentaling of service line from LT bare conductor and to KM

provide service connection on Aerial Bunch Cable by insulated pierceing connectors

through service connection box complete as required & directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM including fitting of

all acessaries i.e. special design suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of dismantling charge of existing

bare conductor and crediting in to store & dismentaling of service line from LT bare

conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer in

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all acessaries

i.e. special design suspension / tension clamp, fixing of cross arm, binding to pin

insulator,preparing shackle point,jumpers etc. and inclusive of dismantling charge of

144 9924000067 existing bare conductor and crediting in to store complete as required & directed by KM

Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of all acessaries

i.e. special design suspension / tension clamp, fixing of cross arm, binding to pin

insulator,preparing shackle point,jumpers etc. and inclusive of dismantling charge of

existing bare conductor and crediting in to store complete as required & directed by

145 9924000068 Engineer in Charge KM

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including fitting of all

acessaries i.e. special design suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of dismantling charge of existing

bare conductor and crediting in to store & dismentaling of service line from LT bare

146 9924000069 conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing KM

connectors through service connection box complete as required & directed by Engineer in

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all

acessaries i.e. special design suspension / tension clamp, fixing of cross arm,

LT shackle insulator etc. for fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and crediting in to store &

dismentaling of service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated pierceing connectors through

service connection box complete as required & directed by Engineer in

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM

including fitting of all acessaries i.e. special design suspension / tension

clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger

wire and inclusive of dismantling charge of existing bare conductor and

crediting in to store & dismentaling of service line from LT bare conductor

and to provide service connection on Aerial Bunch Cable by insulated

pierceing connectors through service connection box complete as required &

directed by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all

acessaries i.e. special design suspension / tension clamp, fixing of cross arm,

149 9924000067 binding to pin insulator,preparing shackle point,jumpers etc. and inclusive of KM

dismantling charge of existing bare conductor and crediting in to store

complete as required & directed by Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of

all acessaries i.e. special design suspension / tension clamp, fixing of cross

150 9924000068 arm, binding to pin insulator,preparing shackle point,jumpers etc. KM

and inclusive of dismantling charge of existing bare conductor and crediting

in to store complete as required & directed by Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including

fitting of all acessaries i.e. special design suspension / tension clamp, fixing of

cross arm, LT shackle insulator etc. for fixing of messenger wire and inclusive

of dismantling charge of existing bare conductor and crediting in to store &

dismentaling of service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated pierceing connectors through

service connection box complete as required & directed by Engineer in

Laying Testing & commissioning of specially designed 11KV 55 sqmm

152 9601000734 AAAC Medium voltage covered conductor as per technical specification Per KM

( With Accessories) Note: In 1KM 3 nos of MVCC conductor to be erect.

Laying Testing & commissioning of specially designed 11KV AL-59 ACS

153 9601000734 Medium voltage covered conductor as per technical specification (With Per KM

Accessories) Note: In 1KM 3 nos of MVCC conductor to be erect.

Note: 1.DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ Poles,Insulators,Fabricated

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods confirming to the

relevent ISI specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be provided by DGVCL on payment of required charge for

connection & electricity bill of the same shall be paid by the agency.

4 .All the rates are inclusive of PF & Exclusive of GST applicable time to time.

5 .All steel material are to be painted as below :

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles & steel fabricated materials

of RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the RSJ poles & steel

fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver paint) is to be

properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

Amt In Words : Twenty Seven Lacs, Final Order Value.

Executive Engineer (O&M),

D.G.V.C.L., Kadodara Division