Tender for ARC based work for Fabrication of steel Materials under Piplod Division.

SUB: ARC based work for Fabrication of steel Materials under Piplod Division

Fabrication of Anchor Rod from 16 SQ.mm MS

1 9910000049/ Roundbar & 65 mm x 65 mm x 6 mm / 50 mm x

9910000050 50 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of Eye Bolt from 16 SQ.mm MS

2 Raoundbar with supplying of 2 (two) nuts of

suitable size as per approved drawing and

requirement of the company.

Fabrication of Turn Buckle from 16 SQ.mm MS

3 9910000028/ Raoundbar & 65 mm x 65 mm x 6 mm / 50 mm x

9910000016 50 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of 11' (feet) long Top/Bottom/D.O.

4 angle from 65 mm x 65 mm x 6 mm M.S. angle as

per approved drawing and requirement of the

Fabrication of 9' (feet) long Top/Bottom/D.O. angle

5 from 65 mm x 65 mm x 6 mm M.S. angle as per

approved drawing and requirement of the

Fabrication of 4'6" (feet) long Tapping / bracing

6 angle from 65 mm x 65 mm x 6 mm M.S. angle as

per approved drawing and requirement of the

Fabrication of 2'3" (feet) long bracing/ support

7 angle from 65 mm x 65 mm x 6 mm M.S. angle as

per approved drawing and requirement of the

8 Fabrication of 11KV HT 'V' Cross Arm from 65 mm

x 65 mm x 6 mm M.S. angle as per approved

drawing and requirement of the company.

Fabrication of 11KV HT Top fitting from 65 mm x

9 65 mm x 6 mm M.S. angle and 50mm x 6 mm M.S.

flat as per approved drawing and requirement of

Fabrication of 22KV HT Top fitting from 65 mm x

10 65 mm x 6 mm M.S. angle and 50mm x 6 mm M.S.

flat as per approved drawing and requirement of

11 Fabrication of 22KV HT 'V' Cross Arm from 65 mm

x 65 mm x 6 mm M.S. angle as per approved

drawing and requirement of the company.

12 Fabrication of Guy Clamp pair suitable for PSC

pole from 50mm x 6 mm M.S. flat as per approved

drawing and requirement of the company.

Fabrication of 'U' Clamp from 50mm x 6 mm M.S.

13 flat as per approved drawing and requirement of

Fabrication of 'C' clamp suitable for PSC pole from

9910000043 50mm x 6 mm M.S. flat as per approved drawing No.

and requirement of the company.

15 Fabrication of 'C' clamp suitable for RSJ GIRDER

pole from 50mm x 6 mm M.S. flat as per approved

drawing and requirement of the company.

Fabrication of Three hole patti from 50mm x

16 mm M.S. flat as per approved drawing and

requirement of the company.

Fabrication of 11' (feet) long Top/Bottom

17 channel from 100 mm x 50 mm x 5 mm

M.S. channel as per approved drawing and

requirement of the company.

Fabrication of 9' (feet) long Top/Bottom

18 channel from 100 mm x 50 mm x 5 mm

M.S. channel as per approved drawing and

requirement of the company.

Fabrication of 11'(feet) long angle bracing

19 from 50 mm x 50 mm x 6 mm M.S. angle as

per approved drawing and requirement of

Fabrication of 9'(feet) long angle bracing

20 from 50 mm x 50 mm x 6 mm M.S. angle as

per approved drawing and requirement of

Fabrication of 11' (feet) long channel

21 welded from assorted length of scrap

channel as per approved and requirement

Fabrication of 9' (feet) long channel welded

22 from assorted length of scrap channel as

per approved and requirement of the

Fabrication of Guy Clamp pair suitable for

23 10 mtr PSC pole from 50mm x 6 mm M.S.

flat as per approved drawing and

requirement of the company.

Fabrication of Guy Clamp pair suitable for

24 9/11mtr RSJ GIRDER pole from 50mm x

9910000073 mm M.S. flat as per approved drawing and

requirement of the company.

Fabrication of 5' (feet) long Tapping angle

25 from 65 mm x 65 mm x 6 mm M.S. angle as

per approved drawing and requirement of

Fabrication of H.T. Ext'n suitable for 22KV

26 system from 65 x 65 x 6 mm M.S. angle as

per approved drawing and requirement of

Fabrication of H.T. Ext'n suitable for 11KV

27 system from 65 x 65 x 6 mm M.S. angle as

per approved drawing and requirement of

Fabrication of 750 mm long Channel for HT

28 AB conductor from 100mm x 50mm x 5mm

9910000069 M.S. Channel as per approved drawing and No.

requirement of the company.

Fabrication of 22KV HT "V" Cross Arm from

29 100mm x 50mm x 5mm M.S. Channel as

per approved drawing and requirement of

IN WORDS TEN LAKH ONLY

1. All fabricated items shall be fabricated by using welding rods confirming to the relevant ISI

specifications and as directed by Engineer In-charge.

2. All fabricated items shall be painted with good quality (ISI Marked) of red oxide paint.

3. Necessary electricity connection shall be provided by DGVCL on payment of required charges for

connection & electricity bill of the same shall be paid by the agency.

4. All the rates are inclusive of PF and exclusive of GST applicable time to time.

% ABOVE/BELOW OF ESTIMATE AMT

STAMP & SIGN OF CONTRACTOR

DGVCL PIPLOD DIVISION