2019104183/15/LCC/BMC

Amount

Providing and installation of corrugated sheet security hut and supply of Rescue equipments for Jeevan Rakshak Dal for 05 lakes.

Corrugated sheet security hut Technical Specifications Supplying of Security Hut of corrugated Sheet: Providing and installation of Security Hut of Corrugated Sheet for Jeevan Rakshak dal L =12 ft., H = 10 ft, W = 10 ft. Window = (2.5 X 3 ft) Door = 3 X 6 ft The structure of the hut should be made of on M.S. pipe of as per mention in enclosed drawing with suitable door & window Corrugated color coated M.S. Profile Roof of 1.00 mm thickness. It should be with automatic solar light system of 2W.

Providing and supplying HDPE Rescue boat Material : HDPE (High density poly ethylene), Length # 3.80M, width # 1.50M, Depth-0.50M, capacity # Person 08, weight Kg 120, Hull : V shaped, Double skin hull (Roto moulded) , Accessories : Engine panel, Lockers Storage Bench 90 liters Mooring Ring, cleat Chromed drain plug Deck lashing Tow rope hole Foot bars Radium rescue stickers OBM : 30 HP Engine 2 stroke HDPE Rescue boat should be certified by IACS Member. Variation +_ of 5% is allowed in the dimensions of boat

Supplying of Floating Rescue stretcher The Stretcher should be fabricated from a special plastic grade which is both flexible and durable. It should be revolutionary design which provides outstanding patient protection and security. When the rescue is packed the stretcher becomes rigid. Size 250x84 cm load capacity 159 KG

Supplying of Rescue fiber stretcher The Stretcher is fabricated from a fiber FRP which is durable and water resistance. It is revolutionary design which provides outstanding patient protection and security. Size:7 ftX2 ft X0.8ft Load capacity: 160 kg

Supplying of Water Diving suit SPECIFICATION OF BREATHING APPARATUS SET (DIVING KIT WITH COMUNICATION) 1. Role : The self-contained underwater breathing apparatus (SCUBA) proposed is for carrying out under diving 2. GENERAL: The apparatus should be rugged, lightweight suitable for carrying by a single person. The set should have its standard and optional equipments and should comprise of following:- a) Compressed air cylinder pack b) Harness (Basic structure on which the cylinder are mounted and other accessories for donning the set are fitted) c) Face mask with breathing/demand valve d) A regulator unit e) Air supply system f) Pressure indicating gauge g)Buoyancy compensating device if any h) Test Kits i) Tools Kits 3. DIMENSIIONS: A variation of 5% to 10% is acceptable. 1 Nominal capacity of set 10-12 liters 2 Charging pressure 200-300 bars 3 Capacity of set after charging At least 2400 liters 4 Weight of set Not more than 20-25 kg 5. Cylinder makes As for as possible to be composite material with unlimited life. a) As far as possible the set to have a wide vision full-face mask. The straps provided should form an effective seal on to the face. b) Re-breathing of carbon dioxide enriched exhaled air must be eliminated and the breathing resistance must be as low as possible whilst the equipment must have sufficient capacity to cater for even an extremely hard work rate. c) In case the diver does not want to use the full-face mask then the breathing valve with mouthpiece should suffice for the use underwater. d) Mouth piece to have separate inhale and exhale channels so that the moisture from the driver cannot get deposited in the inlet section of the breathing valve. This avoids risk of valve freezing in open positions. e) There should be a mechanism to have a reserve air in the set and indication to that effect available. f) As far as possible the set should be designed for use in temperatures range of minus 10 degree Celsius to 50 degree Celsius. g)The set should withstand sea state up to 5 4. SPARES: a) Operational Manual giving details of maintenance and repair instructions. b) Test and trail report, if any along with inspection certificate. 5. PRESERVATION: - Firm is to furnish preservation procedure of the diving set of any. SPECIFICATION OF DIVING SUIT(DIVING KIT) Sl.No. Technical Specification 1 The diver wet suit proposed is for use by the divers operating Underwater, which can be easily seen whilst on the surface of water. 6. The above wet suit should be made from macro cellular neoprene with 03 to 05 mm thickness. 7. DESCRIPTION OF BOOT DIVER NEOPRENE ( DIVER' S SOCKS) The socks used in conjunction with above - mentioned wet suit should be made from double lined neoprene with non-slip sole, which reduces, wear and prevents sliding on wet or slippery surfaces. Thickness of the socks should be 3 mm. 8.SPECIFICATION OF WEIGHT BELT, DIVE FINS, GLOVES 1. WEIGHT BELT ROLE 1. To attached lead weights of 1 Kg (04 numbers) to a diver to adjust buoyancy during a diving operation. 2. Main Feature i) Waist belt made of polypropylene/ nylon fabric should have a quick release non- breakable buckle of plastic / fiber / non-corrosive soft metal of adjustable size of tightening. iii) The belt should be of adjustable 30" - 45" range in length, 3 mm thick and 2" broad (approx). iv.) Color: Black v) Weight - Kg lead ( 04 numbers). 2. SPECIFICATION OF FINS SWIM (DIVE FINS) 1. ROLE: Assist Diver in hands free swimming on surface and underwater. These fins are for use during Combat / long distance/ against current. 2. MAIN FEATURES I) Description - Color Black. Length not less than 17", Width not less Than 4" (top) and 8.8" (Bottom). Dimension tolerance + ii) Material - Thermoplastic rubber/ Natural rubber. Should not skid Even on a wet metal deck. a) Max propulsion whilst swimming in water using flutter and frog kick. iv) Shoe Pocket - Pocket should be 7" - 8" deep with an adjustable back strap (not less than 1.5 inch in width). Inner part should be made of soft rubber for use with bare feet. One additional back strap should be supplied with the fins. v) Buoyancy - Approximately 10% negatively buoyant. SPECIFICATION OF GLOVES (DIVING KIT) 3. GLOVES I) Gloves should be made of neoprene ii) The Palm of the Gloves should be made up anti slippery polyurethane. iii) The thickness should be not less than 5 mm iv) Gloves should be suitable at a depth of not less than 50 Mtrs. This is made of higher quality. SPECIFICATION OF COMMUNICATION EQUIPMENT (SURFACE & DIVER) The system should establish and maintain voice communication between Diver Under Water and the Attendant / supervisor of the Diver on the surface during a diving operation to a depth of 15 meters # Continuous voice communication between surface team and one diver Under Water up to a depth of 15 m. # Special case to prevent water from entering the surface unit # The diver units to be sealed to avoid any water from coming in or hindering communication. # The supervisor should permits hands free use on the diving site. # Length of the umbilical provided will be 50 meters long with rope cover having strength min 1200 N. # The system should have built in battery for use over 10 hrs communication under water before recharging is required. # Hi quality communication between diver and surface attendant. # Each DUCS set should consist of :- # One No. Diver unit - Microphone and Earpiece with attachment to the diving set full face mask. # One Communication cable with rope protection of 50 mtrs length with connectors and carry bag. # One Surface unit with built in battery, speaker, amplifiers and headphone. Should have provision to connect to up to two divers so that unit can be used in future with two divers. # Charger for the battery. # Carrying bag. # Operational / Technical manual.

Supply of storm Pro helmets It should be strong but ABS plastic with a firm foam lining for comfort & sock absorption. It should be features & adjustable ratchet system ensuring perfect comfort & fit every time you put it on. The ear protection features on the storm should be notable which allows to hear clearly.

Supply of Polyamide ropes Supply of Polyamide rope DIAMETER:14MM MADE OF 3-STAND POLYAMIDE TWISTED ROPA ONE SIDE LOOP, OTHER SIDE END STOP KNOT ALSO BOTH SIDE LOOPS LENGTH- 30M ANCHOR PN 930 40M ANCHOR PN 940 50M ANCHOR PN 950 100M ANCHOR PN 9100

Supply of Water Proof Torch LED SUPPLY OF HIGH POWER SEARCH LIGHT (CHANGE) LIGHT OUTPUT:800 LUMENS LIGHT DISTANCE: 600 MAXIMUM 800 LUMENS LIGHT SOURCE: CREE XP LED 5W BATTERY:2X18650 RECHARGEABLE

LIFE JACKET THE USE OF QUALITY MATERIALS LIKE TOUGH AND VIRTUALLY WATER IMPENETRABLE POLYETHYLENE FABRICS ENABLE US TO MAKE SURE OUR CLIENTS. OUR ASSORTMENT IS COMPACT LIFE SAVING DEVICES THAT PREVENT PERSON FROM DROWNING IN THE WATER

LIFE BUOYS DIMENSION:72*43CM THICKNESS:11CM WEIGHT:NOTLESS THAN 2.5KG BUOYANCY:14.5 KG

AROCAPE RESCUE TUBE THIS IS AN EXTREMELY VERSATITLE WATER RESCUE TOOL. USE IS SURF, OPEN WATER AND ALL TYPES OF WATER BODY. IT HAS ROUNDED EDGES FOR NBOTH THE VICTIM AND RESCUER AND IS CONSTRUCTED OF ENSOLITE FOAM WITH A HEAVY DUTY VINYL COVERING . DIMENSIONS: SIZE:104 CM*14.5CM*7CM MATERIALS: PE+EVA COLOR-RED

Providing and installation of corrugated sheet security hut and supply of Rescue equipments for Jeevan Rakshak Dal for 05 lakes.

HAND GLOVES WHITE CUT RESISTANCE HAND GLOVES

SEARCH LIGHT (LED RECHARGEABLE 1000 MTR

FALL ARRESTER RETRACTABLE WIRE ROPE FALL PROTECTION PCGS 15 FALL ARRESTOR BLOCK PLASTIC CASING,WITH GALVANISED STEEL CABLE 15 MTR.LENGTH CE MARKED EN 360. DESCRIPTION: CASING MADE UP OF HIGH IMPACT STRENGTH POLYMER,TO PREVENT BREAKAGE AND IS NEARLY INDESTRUCTIBLE.COMES WITH GALVANIZED STEEL WIRE ROPE OF DIA 4.5 MM.

RESCUE FULL BODY HARDNESS PN 16 SERIES:ISI AND DGMS APPROVED -CONFORMS TO:IS:3521:1999 -FIELD OF USE :FALL PROTECTION -THIS IS DESIGNED TO SUPPORT -THE BODY IN A COMFORTABLE POSITION DURING ANY FALL. -ONE SINGLE D-RING AT THE BACK -NOW AVAILABLE IN SPECIAL POLYESTER WEBBING

Time Marina Inc

Billwin Industries