Augmentation of Infrastructure Facilities at Calicut University

Amount

Earthwork

2.28.1 : Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.9.1 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock

2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

od122393/2020_2021 : Carriage of materials by mechanical transport including loading, unloading and stacking beyond 50 m initial lead up to 1km, including all lifts involved as directed by the Engineer-in-Charge. Excavated Earth / rock.

Concrete work

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.2.5 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size)

4.10 : Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).

od215463/2022_2023 : Providing applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.

od129126/2020_2021 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note :- Minimum Cement content considered in this item is @ 330 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting,nothing extra shall be paid on this account)All work upto plinth level

od154581/2019_2020 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note :- Minimum Cement content considered in this item is @ 330 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting,nothing extra shall be paid on this account). All work above plinth level upto floor V level

od124115/2020_2021 : Extra for providing richer mixes at all floor levels.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note :- Minimum Cement content considered in this item is @ 340 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting,nothing extra shall be paid on this account).

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)

5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide

5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges

5.11.1 : Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies

5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)

5.13 : Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5 m clear span up to floor five level, including the cost of required centering, shuttering but excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

MASONRY WORK

50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

50.6.1.6 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete

50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

50.6.3.1 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete

50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

od323719/2021_2022 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level up to floor five level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

od263252/2020_2021 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half thick solid block masonry.

JOINERY

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

21.3.3 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness

od128446/2020_2021 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With Toughened glass 12 mm thickness

od319041/2021_2022 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With high performance glass panes of 6 mm thickness meeting GRIHA compliance of overall value VLT 34%, SHGC 0.34.

od60293/2022_2023 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item) With annealed high performance glass panes of 6 mm thickness including performance sun control film for meeting GRIHA compliance of overall value VLT 0.4%, SHGC 0.25, U value 3.3 W/m2/K

9.12 : Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. ( Area of opening for glass panes excluding portion inside rebate shall be measured).

21.4.1 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness

9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

9.21.1 : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative Type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

9.24.1 : Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded ) (overall area of door shutter to be measured):Rectangular or square

9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

10.27.1 : Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide P A 6 grade sleeve, including drilling of hole in frame, concrete/masonry, etc. as per direction of Engineer-in-charge.10 x 60 mm

10.27.2 : Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide P A 6 grade sleeve, including drilling of hole in frame, concrete/masonry, etc. as per direction of Engineer-in-charge.10 x 80 mm

10.27.3 : Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide P A 6 grade sleeve, including drilling of hole in frame, concrete/masonry, etc. as per direction of Engineer-in-charge.10x120 mm

9.76 : Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

9.77 : Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete

9.103 : Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete.

9.84 : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

9.97.3 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm

9.97.5 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm

9.101.1 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper

9.102 : Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

21.15.1 : Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Anodized (AC 15 ) aluminium

21.12.1 : Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Anodized (AC 15) aluminium tubular handle bar

50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop

21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.

9.126.1 : Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick.Marine plywood conformingto IS : 710

9.127.2 : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick

9.161 : Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontalside & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mmthick GI sheet ( Zinc coating not less than 120gm/m2) suita2ble for mounting 120min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineralwool Insulation having density min 96Kg/m2 . The frame will have a provision ofG.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style ofsize M10 x 80 ) suitable for fixing in the opening along with Factory madeTemplate for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire ratedglazed shutter . The frame shall be finished with a approved fire resistant primeror Powder coating of not less than 30 micron in desired shade as per thedirections of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded

9.162 : Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minFire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certifiedas per laboratory approved by Engineer-in-charge, with suitable mounting ondoor frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mmwide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet(zinc coating not less than 120gm/m²) duly filled mineral wool insulation havingdensity min 96 kg/m³ and fixing with necessary stainless steel ball bearing hingesof size 100x89x3mm of approved make, including applying a coat of approvedfire resistant primer or powder coating not less than 30 micron etc all completeas per direction of Engineer-in-charge (panelling to be paid for seperately

9.164 : Providing and fixing glazing in fire resistant door shutters, fixed panels & partitionsetc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mmfrom the edges and 150 mm c/c , including applying a coat of approved fire resistantprimer/powder coating of not less than 30 micron on G.I. beading, & special ceramictape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-incharge.The glass shall be clear, toughened, interlayered, non-wired fire resistant having11 mm thickness of approved brand with 120 minutes of fire resistance both integrity &radiation control (EW120) and minimum 15 min of insulation (EI15) and having a soundreduction of ?37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category ofImpact Resistance as per EN 12600. The glass should be manufactured in UL & TUVaudited Facility and including UL-EU Certification.The maximum glazing size cannotbe more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report forthe complete system (Glazed Door or Partition) will be considered valid only if it containsthe stamp and signature of the authorized signatory from the glass manufacturer.(Actual glass size is to be measured at site for payments).

9.139 : Providing and fixing panic bar / latch (Double point ) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer -in-charge, all complete.

9.165.1 : Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm

10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

10.7 : Providing and fixing ball bearing for rolling shutters.

10.8.1 : Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area

10.9 : Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).

10.11.2 : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11B and K 12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

10.12 : Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and composite units.

10.30.2 : Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :5.5 mm thick glass panes

od128390/2020_2021 : Supplying And Fixing a pair of fire rated Solid SS Lever Handle and Mortise Lock case with Cylinder of approved size and quality for fire rated steel doors etc complete all works including all required fixtures as directed by Engineer in Charge.

od128444/2020_2021 : Providing wood work in skirting and top covering of partition works including fixing using necessary screws and adhesives , using good quality Anjili wood /jack wood . The rate shall include cost and conveyance of all material ,labour charges,screws, adhesives, lead ,lift etc. complete as directed by Engineer - in- charge.

od129002/2020_2021 : Supply and Installation of pair of Handles for Glass Door of Stainless Steel Satin Finish, SS 304 Back To Back Pull Handles Dia. 25 mm,CTC Length 300 mm all complete, as per approved drawing and as directed by engineer in charge.

od129003/2020_2021 : Supplying And Fixing Glass to Glass Hook Lock of Dorma make WG-300G-G/G-PC45-NIDCSSS series or equivalent for Frameless glass double door with 60mm EPC - both side key , all complete as per approved drawings and as directed by engineer in charge.

od129009/2020_2021 : Providing and fixing hardwares for Handicaped door(Excluding door frame and panel).The shutter to be provided with cylindrical knob lock with rose diameter 75 mm and SS matt finished kick plate of dimension 300 MM X 1050 MM X 1MM including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing etc. complete as directed by the Engineer-in-Charge at all levels:

od124474/2020_2021 : Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC/ Aluminium sliding window with necessary screws etc. complete.

od124575/2020_2021 : Supply of Remote Sensing Doors with breakout panels and side screens; framed construction with pivot fittings firmly secured to the header construction, profile shall conform to ST flex leak/SL BO profile. The finish shall be anodized and colour as approved by Engineer in Charge, and the door shall open on power failure (with back-up battery pack), with automatic control of the door panel movements. Manufactured in accordance with German code of practice ZH 1/494 governing power-operated windows, doors and gates, German UVV (accident prevention) regulations, and VDE (Association of German Engineers) regulations (latest edition in each case), Complaint with DIN 18650 Safety Standards for Pedestrian Doors and TUV Design Tested for Durability of 1 Million Cycles, sliding door operator, with maximum Operator Dimensions 100X180mm (height X Depth), With Internal Cover and with mounting back plate for easy installation and a flexible track profile for improved noise vibration dampening and easy maintenance. Microprocessor-controlled control unit, Self-learning, with adjustable parameters for opening and closing speed, hold-open time and opening and closing force, reversing when obstruction is encountered, Automatic control shall be done by two RADAR detectors with a range of operating, control options and safety devices, Class of protection for RADAR shall be IP 20. Actuators- approved 6 Safe Combination Sensor System (02 Nos),magnetic contact switch for air curtain, Light barriers comprising receiver and transmitter ( 02 set )for through-passage monitoring with Electro-mechanical locking, Bistable, Program Switch, baggage trolley sensor and manual bypass switch . Operators minimum weight carrying capacity shall be100 Kgs. The system shall have constant power supply 230V+ 5%, 50Hz, AC and shall be provided with bypass switch. All glass shall be 12 mm thick heat soaked.Door shall be provided with with UPS of minimum 600VA for minimum operation of 30 cycles/30 minutes. The tile cutting for U channel of 25x40mm channel fixing, making good the floor shall be done as directed by the Engineer in Charge The system shall be complete as per design and instructions of Engineer-in-Charge RSD (Double leaf) -door width 2000mm X 2400mm - opening width 4000mmx2550mm approx)

od125457/2020_2021 : Providing and fixing 12mm compact laminate, floor mounted Modular Toilet cubicles of approved size make and Model . Approximate size of cubicle 1100mm(W) X1550MM(D) X 2003mm(H) ( or equivalent size) and approximate door size 600mm (W) X 1750mm (H) using 12mm thick Compact Laminate of approved colour and finish as per manufacturer specifications, SS screws 304 grade and PVC wall plugs, Aluminium U and F channel ,aluminium door stopper etc.The rate is Inclusive of cost,carriage of all materials, labour charge, lead , lift, complete as directed by Engineer-in-Charge at all levels. The rate includes cutting the sharp edges of compact laminate with specialised machinery,additional frame work for suit the ledge wall etc,cutting and making good the wall/floor etc wherever required The above work shall be carried out by an agency having sufficient experience in flooring and only skilled and experienced persons shall be employed for this purpose.

STEEL WORK

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.16.3 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes

10.17 : Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

10.19 : Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

10.25.1 : Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

10.25.2 : Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

PARTITION WORK & GLAZING WORK

9.105.2 : Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS : 2095 : part I

od124951/2020_2021 : Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer, enamel paint etc. complete, all as per direction of Engineer-in- charge.

od124952/2020_2021 : Providing & fixing 50mm thick Rock wool insulation having a density of 48kg/m3 conforming to IS:8183-1993 for partitions. The rock wool cut into 600x600mm size to be wrapped with mineral fibre tissues and placed between the partitions.The rate shall includes cost and conveyance of all materials, plastic cover wrapping, labour charges, lead, lift , etc as directed by Engineer-in-Charge at all levels.

od125428/2020_2021 : Providing and fixing 12mm thick marine plywood confirming to IS: 710 marked,for partition works to backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)

25.1 : Providing and supplying aluminium extruded tubular and other aluminium sectionsas per the architectural drawings and approved shop drawings , the aluminiumquality as per grade 6063 T5 or T6 as per BS 1474,including super durable powdercoating of 60-80 microns conforming to AAMA 2604 of required colour and shadeas approved by the Engineer-in-Charge. ( The item includes cost of material suchas cleats, sleeves, screws etc. necessary for fabrication of extruded aluminiumframe work. Nothing extra shall be paid on this account).

25.2 : Designing, fabricating, testing, protection, installing and fixing in position semi(grid) unitized system of structural glazing (with open joints) for linear as well ascurvilinear portions of the building for all heights and all levels, including:a) Structural analysis & design and preparation of shop drawings for the specifieddesign loads conforming to IS 875 part III (the system must passed the proof testat 1.5 times design wind pressure without any failure), including functional designof the aluminum sections for fixing glazing panels of various thicknesses, aluminiumcleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clampsetc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmokeseals, microwave cured EPDM gaskets for water tightness, pressureequalisation & drainage and protection against fire hazard including:b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3Dimentional movement for achieving perfect verticality and fixing structural glazingsystem rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetalliccontacts with nuts and washers etc. of stainless steel grade 316, of the requiredcapacity and in required numbers.c) Providing and filling, two part pump filled, structural silicone sealant and onepart weather silicone sealant compatible with the structural silicone sealant ofrequired bite size in a clean and controlled factory / work shop environment ,including double sided spacer tape, setting blocks and backer rod, all of approvedgrade, brand and manufacture, as per the approved sealant design, within and allaround the perimeter for holding glass.d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thickand of sizes, shapes and profiles, as required as per the site conditions, to seal thegap between the building structure and all its interfaces with curtain glazing tomake it watertight.e) Making provision for drainage of moisture/ water that enters the curtain glazingsystem to make it watertight, by incorporating principles of pressure equalization,providing suitable gutter profiles at bottom (if required), making necessary holesof required sizes and of required numbers etc. complete. This item includes costof all inputs of designing, labour for fabricating and installation of aluminium grid,installation of glazed units, T&P, scaffolding and other incidental charges includingwastages etc., enabling temporary structures and services, cranes or cradles etc.as described above and as specified. The item includes the cost of getting all thestructural and functional design including shop drawings checked by a structuraldesigner, dully approved by Engineer-in-charge.The item also includes the cost of all mock ups at site, cost of all samples of theindividual components for testing in an approved laboratory, field tests on theassembled working structural glazing as specified, cleaning and protection till thehanding over of the building for occupation. In the end, the Contractor shall providea water tight structural glazing having all the performance characteristics etc. allcomplete as required, as per the Architectural drawings, as per item description,as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extrudedaluminium section capping for fixing in the grooves of the curtain glazing andvermin proof stainless steel wire mesh shall be paid for separately under relevantitems under this sub-head. However, for the purpose of payment, only the actualarea of structural glazing (including width of grooves ) on the external face shallbe measured in sqm. up to two decimal places.Note:-2. The following performance test are to be conducted on structural glazingsystem if area of structural glazing exceeds 2500 Sqm from the certified laboratoriesaccreditated by NABL(National Accreditation Board for Testing and CalibrationLaboratories), Department of Science & Technologies, India. Cost of testing ispayable separately. The NIT approving authority will decide the necessity of testingon the basis of cost of the work, cost of the test and importance of the work.Performance Testing of Structural glazing systemTests to be conducted in the NBL Certified laboratories1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to+300pa) as perASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testingmethod for a range up to 2000 ml.”3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testingmethod for a range upto 2000 ml”4. Structural Performance Deflection and deformation by static air pressure test(1.5 times desing wind pressure without any failure) as per ASTME-330-10 testingmethod for a range upto 50 mm”5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method forQualitative test” Tests to be conducted on site6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)upto 2000ml”

25.3 : Providing, assembling and supplying vision glass panels (IGUs) comprising ofhermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel unitsof size and shape as required and specified, comprising of an outer heatstrengthened float glass 6mm thick, of approved colour and shade with reflectivesoft coating on surface # 2 of approved colour and shade, an inner Heat strengthnedclear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primaryseal and secondary seal (structural silicone sealant) etc. all complete for the requiredperformances, as per the Architectural drawings, as per the approved shopdrawings, as specified and as directed by the Engineer-in-Charge. The IGUs shallbe assembled in the factory/ workshop of the glass processor. (Payment for fixingof IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment,only the actual area of glass on face # 1 of the glass panels (excluding the areas ofthe grooves and weather silicone sealant) provided and fixed in position, shall bemeasured in sqm.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating onface # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved makehaving properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflectioninternal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performanceglass shall be decided by technical sanctioning authority as per the site requirement

25.4 : Extra for openable side / top hung vision glass panels (IGUs) including providingand supplying at site all accessories and hardwares for the openable panels asspecified and of the approved make such as heavy duty stainless steel frictionhinges, min 4 -point cremone locking sets with stainless steel plates, handles,buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts,washers etc. all complete as per the Architectural drawings, as per the approvedshop drawings, as specified and as directed by the Engineer-in-Charge.

25.5 : Providing,fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5mm and nominal mass not less than 60 gm/ sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts,bolts, washers etc complete.

25.6 : Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., all complete for the required performance as specified, as per the architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in - Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass panels in the curtain glazing is included in cost of relevent item*).(ii) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face #2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35%, Light reflection internal 10 to 15%, light reflection external 10 to 20%, shading coefficient (0.25 - 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

25.8 : Design supply & installation of suspended Spider Glazing system designed towithstand the wind pressure as per IS 875 (Part-III). The Suspended Systemheld with Spider Fittings of SS-316 Grade Steel of approved manufacturer withglass panel having 12 mm thick clear toughened glass held together withSS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins21 mm thick. The Glass fins and glass panel assembly shall be connected toSlab/beams by means of SS- 316 Grade stainless steel brackets & Anchor boltsand at the bottom using SS channel of 50x25x2mm using fastener & anchorbolts, non staining weather sealants of approved make, Teflon/ nylon bushesand separators to prevent bi-metallic contacts, all complete to perform as perspecification and approved drawings. The complete system to be designed toaccommodate thermal expansion & seismic movements etc. The joints betweenglass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assemblyto be filled with non staining weather sealant, so as to make the entire systemfully water proof & dust proof.The rate shall include all design, Engineering and shop drawing includingapproval from structural designer, labour, T&P, scaffolding, other incidentalcharges including wastage, enabling temporary services all fitting fixers nutbolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc.all complete. For the purpose of payment, actual elevation area of Glazingincluding thickness of joints and the portion of Glass panel inside the SS channelshall be measured.

FLOORING

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.41.3 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x 800 mm

11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

11.46.3 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 800 x 800 mm

11.4 : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete

11.6.1 : Cement plaster askirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick

11.20.3 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement

11.48.2 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

11.48.3 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 800x800mm

11.55.1 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.

11.56.1 : Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

7.38.1.1 : Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.8 mm thick (mirror polished and machine cut edge)Granite stone of any colour and shade

8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

8.9.1.2 : Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.Granite of any colour and shade

8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete.

od157335/2019_2020 : Providing and laying Antiskid Ceramic floor tiles 300x300x7 mm of Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer-in-Charge at all levels.

od163674/2019_2020 : Providing and fixing PVC tile edging to match the wall tiles and finishing as directed by the Engineer-in-Charge at all levels.

od170042/2019_2020 : Providing and fixing concrete brick cladding of red colour matt finish and thickness 10 mm (approx.) with approved texture and shade up to 15 metre height with water absorption 10 % and compressive strength 15.0 N/mm2 . Concrete brick cladding shall be fixed with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in required thickness, including grouting of joints using joint fillers of matching colour, as per Architectural drawing and direction of Engineer-in-Charge. The rate shall include cost and conveyance of all materials, lead, lift, scaffolding, all labour charges etc. Size of concrete brick 190 x 60 mm (Approx.)

od175042/2019_2020 : Providing and laying anti skid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

od175110/2019_2020 : Providing and laying exterior grade vitrified tile flooring of approved size and thickness with water absorption less than 0.08% of first quality confirming to IS:15622 with of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge ,including cost and conveyance of all materials, labour charges,lead, lift, curing, etc, complete and tile protection till handover as directed by Engineer-in-Charge at all levels.

WATER PROOFING WORK

22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)

22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

22.22A : Providing and applying fibre reinforced elastomeric liquid water proofing membranewith resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top ofconcrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming ofelastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and twocoats of undiluted elastomeric waterproofing liquid (dry film thickness of completeapplication/system not less than 500 microns). The operation shall be carried outafter scrapping and properly cleaning the surface to remove loose particles withwire brushes, complete in all respect as per the direction of Engineer-in-Charge.

22.23A : Providing & Applying polymer modified, flexible cementatious negative sidewaterproofing coating with elastic waterproofing polymers on interior wall plastersurface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatiouswaterproofing polymer(dilution with water in the ratio of 1:1) and two coats ofcementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) afterscrapping and properly cleaning the surface to remove pre-existing paint film &loose particles till plaster is visible, complete in all respect as per the direction ofEngineer-in-Charge.

22.24A : Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be appliedas intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5mm thickness after scrapping and properly cleaning the surface to remove looseparticles from the plaster surface, followed by top coating with Premium AcrylicSmooth exterior paint with Silicone additives of required shade by two or morecoats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge

22.26 : Providing and applying of swellable type water stop tape, 19mm x 25mm thick inlinear meter (expansive nature) for construction joints treatment of RCC structuresuch as raft slab, retaining walls, water storage tank and at the junctions of raftslab with the retaining walls etc.. After cleaning the surface, one coat of requiredprimer for swellable water stop tape shall be applied throughout the length of thejoint @3.78 litre per 240 running meter. Over the primed surface swellable typewater stop tape shall be placed. The work shall be carried out all complete as perspecification and the direction of the engineer-in-charge. The product performanceshall carry guarantee for 10 years against any leakage.

CEILING WORK

12.45.3 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board.

12.52.1 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending

12.52.2 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.GI Metal Ceiling Lay in perforated Tegular global white color tiles of size 595x595 mm and 0.5mm thick with 8 mm drop; made of GI sheet having glavanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyster powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

12.52.3 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.

26.45 : Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavyduty fiber cement board (High pressure steam cured) conforming to IS14862:2000 of category III type B as per standard sizes fixed with self-drilling /taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mmthick of 8 to 10 gauge of length varying from 25 to 45 mm.

ROOFING

50.12.2.1 : Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.

FINISHING

13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

13.8.1 : 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1:3 ( 1 Cement : 3 fine sand)

13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

13.33.2 : Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Raised and cut pointing

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.50.4 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.114 : Melamine polishing on wood work (one or more coat).

5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.

MISCELLANEOUS WORK

16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

16.79 : Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.

16.91.1 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- harge.60mm thick cement concrete paver block of M-35 grade with approved colour, design& pattern.

21.7.1 : Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fastners of 8 mm dia and 75 mm long bolt including providing aluminium - washers 2 mm thick 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per drawing and direction of Engineer -in-charge.Anodised aluminium sheet 2.5 mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

21.7.2 : Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fastners of 8 mm dia and 75 mm long bolt including providing aluminium - washers 2 mm thick 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per drawing and direction of Engineer -in-charge.Powder coated aluminium sheet 2.5 mm thick ( minimum thickness of powder coating 50 micron)

5.28 : Providing and fixing in position 12 mm thick bitumen impregnated fibre board conforming to IS: 1838, including cost of primer, sealing compound in expansion joints.

23.5 : Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer -in- charges

23.6 : Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit,over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer -in-Charge

23.7 : Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.

60.6 : PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete.

od125711/2020_2021 : Supplying and fixing C.I. cover with frame for manholes :600x600 mm square C.I. cover (light duty) the weight of the cover to be not less than 32 kg. Complete all works including cost and conveyance of all materials, all labour charges,lead, lift, sundries, etc., complete. as directed by the Engineer- in-Charge

od129227/2020_2021 : Supplying and fixing C.I. cover with frame for manholes :600x600 mm square C.I. cover (Heavy duty) the weight of the cover to be not less than 210 kg. Complete all works including cost and conveyance of all materials, all labour charges,lead, lift, sundries, etc., complete. as directed by the Engineer- in-Charge

od128285/2020_2021 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.: 250 mm dia RCC pipes.

19.6.4 : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia R.C.C. pipe

od129230/2020_2021 : Providing and constructing soak pit 2 m x 2 m x 2 m size with honey comb brick work on the sides upto a height of 1.2 m and brick masonry in CM 1:6 for the balance height,providing and filling brick bats graded, upto a height of 1.7 m,providing and laying precast slab over the pit supporting on the brick work, including cost and conveyance of all materials,labour charges, lead, lift, etc. complete as directed by the Engineer-in-charge.

LANDSCAPING WORK

30.2.57.1 : Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100)

od32796/2022_2023 : Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.

od32797/2022_2023 : Providing and stacking of Tectona grandis (Teak) of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.

od32798/2022_2023 : Providing and stacking of Tamarindus indica (Imli) of height 120-150 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.

od32799/2022_2023 : Providing and stacking of Polyalthia longifolia (Ashok) of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-in-charge.

od32800/2022_2023 : Providing and stacking of Plumeria alba of height 120-135 cm. with 2-3 branches in bags of size 30 cm as per direction of the officer-in-charge.

od32801/2022_2023 : Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge.

od32802/2022_2023 : Providing and stacking of Peltophorum species of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

od32803/2022_2023 : Providing and stacking of Mimusops elengi (Maulsri) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.

od32804/2022_2023 : Providing and stacking of Michelia champa (Golden Champa) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.

od32805/2022_2023 : Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.

PHE WORKS

2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia

2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

2.10.1.3 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm

12.44 : Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

17.10.1.1 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 250 mm

17.11.2 : Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm

17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes

18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes

18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes

18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes

18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes

18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

18.9.7 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work62.50 mm nominal inner dia pipes

18.9.8 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work75 mm nominal inner dia pipes

18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

18.17.1A : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore

18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

18.17.5 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

18.17.6 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore

18.19.3.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreHorizontal

18.19.4.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreHorizontal

18.31.1.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):100 mm diameterClass II

18.31.3.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):150 mm diameterClass II

18.31.5.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):250 mm diameterClass II

18.33.1 : Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

18.52.1 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

19.8.1.1 : Extra for depth for manholesSize 90x80 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5

19.30.2.1 : Constructing brick masonry chamber for underground C.I. inpection chamber and bends with bricks in cement mortar 1:4 ( 1 cement: 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg), R.C.C top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets:With common burnt clay F.P.S (non modular) bricks of class designation 7.5

19.35.1 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.450 mm dia RCC pipes.

23.5 : Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer -in- charges

23.6 : Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit,over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer -in-Charge

23.7 : Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.

50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.18.9.21.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl

50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

od40741/2022_2023 : Providing,fixing and testing digital water meter with digital display with all internal parts in gunmetal or brass, strainer, flanged distance piece for easy removal in future, bourdon type pressure gauge and isolation cock including necessary test certificate for the meter from local municipal authorities ; ISI marked along with all accessories as per the instructions of the Engineer in Charge at all levels: 50 mm nominal bore

od40846/2022_2023 : Supplying and fixing CP Health Faucet with max flow rate of 3.8lpm or lower as per GRIHA norms superior quality including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

od111780/2020_2021 : Providing and fixing star white vitreous china under counter wash basin ;of ;approved ;size ; ;make ;including one CP brass pillar cock 15 mm NB with aerator with max flow rate of 3.8l pm or lower as per GRIHA norms ;including ;connecting pipes ;with ;all fittings 32 mm dia rubber ;plugs 32 mm dia CP brass ;waste coupling, 32 ;mm dia CP brass ;bottle trap, ;15mm angle valve, etc. ;complete as directed ;by the Engineer-incharge ;at all ;levels.(Models Cera ;S2030103/ Hindware 1004900SW+ Cera ;F1015101/Hindware ;F280001CP or ;equivalent as per ;the instructions of the ;engineer in ;charge)

od111781/2020_2021 : Providing and fixing white vitreous china flat back urinal ;with ;sensor with a max flow rate of 1.5 lpf or lower as per GRIHA norms along withC.P. ;brass spreaders with brass unions and G.I. clamps complete, ;including ;painting of ;fittings ;and ;brackets, ;cutting and making good the walls and floors ;wherever ;required: Models ;Hindware 6002110 / ;Cera S4010101 ;or equivalent complete as directed by the ;Engineer in charge ;at all levels

od111782/2020_2021 : Supplying and fixing approved quality white vitreous ;china ;urinal ;division ;plate ;including cost and conveyance of all material, labour charge, lead, ;lift, etc. ;complete as ;directed by ;the ;Engineer-in-Charge. Models- Cera S4090101/ Hindware ;61001 or ;equivalent

od111783/2020_2021 : Providing and fixing C.P. brass long body bib cock with max flow rate of 2.5lpm or lower as per GRIHA norms of approved quality conforming to IS standards and weighing not less than 690 gms. Models ;Hindware F400002CP/ Jaquar FLR-CHR-5047NGE or equivalent ;15 mm nominal bore

od111785/2020_2021 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot ; cold water supply, including all CPVC plain ; brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall ;80 mm dia pipes

od111786/2020_2021 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot ; cold water supply, including all CPVC plain ; brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall ;65 mm dia pipes

od111787/2020_2021 : Providing and fixing floor trap 110 mm dia (gratings exposed)with cockroach trap ;(multi trap), S304 grade exposed floor grating with multitrap including cost and conveyance of all materials, ;labour charges, sundries etc complete ;as directed by the directed by the Engineer in Charge at all levels

od111788/2020_2021 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot ; cold water supply, including all CPVC plain ; brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall ;100mm dia ; ;

od111789/2020_2021 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame ; Round Frame ;with Flat Round Cover with Rubber Seal ; SS Screw including cost and conveyance of all materials, labour ;charges, sundries etc complete as directed by the Engineer in charge at all levels.75mm dia

od111790/2020_2021 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame ; Round Frame ;with Flat Round Cover with Rubber Seal ; SS Screw including cost and conveyance of all materials, labour ;charges, sundries etc complete as directed by the Engineer in charge at all levels.110 mm dia

od111794/2020_2021 : Providing and fixing concealed floor trap with cockroach trap (multi trap), SS304 grade ;floor grating with cup including cost and conveyance of all materials, labour charges, sundries etc complete ;as directed by the directed by the Engineer in Charge at all levels

od111795/2020_2021 : Providing and fixing sanitary fixtures for handicaped toilet including one wash basin one pair mounting brackets,one number pillar cock with aerator with max flow rate of 3.8l pm or lower as per GRIHA norms ; all other related fittings like bottle trap ,angle cock,waste coupling, etc,one number EWC ; Cistern with maximum flow rate of 2/4 lpf or lower as per GRIHA norms complete with fittings ; seat cover,one no hinged rail 76cm ; 4nos. of grab rails 60cm etc designed for people with special needs ;comes with as per manufactures specification including cutting and making good the walls and floors wherever required as per drawing and as directed by Engineer in charge(Model no: ;Hindware ;(70002+ ;Flora ;F280001)/Cera ;(S1012135+B1520118+S2040101+S2090102+F9030451 ;+B2210106+B2210108+ ;F1015101CH ;) or equivalent)

od111797/2020_2021 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone ;aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 60 x 60 cm and 100 cm deep including C.I. cover 500 mm with frame (medium duty) : With bricks.Class designation 75

od111798/2020_2021 : Supplying approved make PVC gully trap of size 160 x 110mm and CI grating 150mmx150mm size and light duty C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with CI grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge.

od111802/2020_2021 : Providing and fixing CI vent cowl as directed by the Engineer in Charge at all levels 80 ;mm dia

od111805/2020_2021 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length ;including cost and conveyance of all materials,labour charges,making good the walls etc complete as ;directed by the Engineer in Charge. 65mm

od111807/2020_2021 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length ;including cost and conveyance of all materials,labour charges,making good the walls etc complete as ;directed by the Engineer in Charge. 80mm

od111808/2020_2021 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length ;including cost and conveyance of all materials,labour charges,making good the walls etc complete as ;directed by the Engineer in Charge. 150mm

od111809/2020_2021 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length ;including cost and conveyance of all materials,labour charges,making good the walls etc complete as ;directed by the Engineer in Charge. 100mm

od111813/2020_2021 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length ;including cost and conveyance of all materials,labour charges,making good the walls etc complete as ;directed by the Engineer in Charge. 65mm

od111814/2020_2021 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length ;including cost and conveyance of all materials,labour charges,making good the walls etc complete as ;directed by the Engineer in Charge. 250mm

od112202/2020_2021 : Providing and fixing sink cock of approved quality conforming to IS 8931 with max flow rate of 3.8l pm or lower as per GRIHA norms ;Models ;Cera ;F1015251/Hindware F330034 or equivalent as ;approved ;by the ;engineer in charge at all levels

od114794/2020_2021 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot ; cold water supply, including all CPVC plain ; brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall ;150 mm dia pipes

od114987/2020_2021 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot ; cold water supply, including all CPVC plain ; brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. ;40 mm dia pipes

od115025/2020_2021 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 160 mm dia 6 Kgf/cm2 - External work- Exposed on wall

od115026/2020_2021 : Providing and fixing PVC pipes includes joints of pipes and fittings with one step PVC solvent cement, trenching, refilling ; testing of joints complete as per direction of Engineer in Charge at all levels 110 mm dia 10 Kg/cm2

od115027/2020_2021 : Providing and fixing PVC pipes including jointing of pipes and fittings with one step pvc solvent cement, trenching , refilling ; testing of joints complete as per direction of Engineer in Charge. 160 mm dia 10 Kgf/cm2

od115028/2020_2021 : Providing and fixing PVC pipes including jointing of pipes and fittings with one step pvc solvent cement, trenching , refilling ; testing of joints complete as per direction of Engineer in Charge. 200 mm dia ,10 Kgf/cm2

od115029/2020_2021 : Providing and fixing PVC pipes including jointing of pipes and fittings with one step pvc solvent cement, trenching , refilling ; testing of joints complete as per direction of Engineer in Charge. 250 mm dia 10 Kgf/cm2

od115037/2020_2021 : Providing and fixing floor mounted water cooler with hot,cold and normal water ;provision with water purification system etc complete with all accessories of approved quality and make ;including cost and conveyance of all materials labour charges ,lead, lift, cutting and making good the walls ;,floors,slabs etc complete as directed by the engineer in charge at all levels

od115210/2020_2021 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Concealed Work-160 mm ;

od115211/2020_2021 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Concealed Work-110 mm ;

od115212/2020_2021 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Concealed Work ;75 mm

od116368/2020_2021 : Supplying and fixing GM foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. <50mm dia

od116372/2020_2021 : Supplying and fixing GM foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. ;65 mm

od116412/2020_2021 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Exposed Works-75 mm

od117259/2020_2021 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length ;including cost and conveyance of all materials,labour charges,making good the walls etc complete as ;directed by the Engineer in Charge. 80mm

od117261/2020_2021 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length ;including cost and conveyance of all materials,labour charges,making good the walls etc complete as ;directed by the Engineer in Charge. 200mm

od117264/2020_2021 : ;Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts,pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels ; ;Head 39m, Capacity-17 m3/hr

od117265/2020_2021 : Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels ;Capacity : 10m3/hr Head : 42 m

od117325/2020_2021 : ;Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts,pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels ; ;Head 38m, Capacity-23 m3/hr

od117326/2020_2021 : Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels ;Capacity : 13 m3/hr Head : 38 m

od173703/2019_2020 : Providing and fixing premium quality C.P. brass overhead shower and wall flange of ;approved make and model with with max flow rate of 3.8l pm or lower as per GRIHA norms including cost of all materials, labour etc., complete as directed by the Engineerin- ;Charge at all levels.(Hindware F160039CP+F280027+F850096/ Cera F7020102+F2002362CH or equivalent)

od173818/2019_2020 : Providing and fixing Stainless Steel eye wash(hand or foot operated)· This contains mainly of shower for Face protection at lower level .Showers are fitted as Foot operated for Face wash including Pipe : Stainless steel pipe 304 grade confirming to Schedule 40,SS eyewash,SS eye wash nozzles,SS bowl for eye wash ,SSfoot pedal etc complete.The rate is including cost and conveyance of all materials, labour charges, lead,lift etc complete as directed by the Engineer in charge at all levels.

od269282/2020_2021 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes,fittings ; specials with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kgf/cm2 - Internal work- Exposed on wall

od269283/2020_2021 : Supplying and fixing GI threaded rod for fixing pipes to walls on slotted channels adequately spaced from the walls.The rate is inclusive of cost and conveyance of all materials,labour charges etc and as directed by the Engineer in charge at all levels.

od269284/2020_2021 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes,fittings ; specials with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

od269285/2020_2021 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes,fittings ; specials with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

od269286/2020_2021 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes,fittings ; specials with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

od269287/2020_2021 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes,fittings ; specials with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

od269288/2020_2021 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes,fittings ; specials with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 kgf/cm2

od269289/2020_2021 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes,fittings ; specials with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110mm pipe 6 kgf/cm2

od316382/2021_2022 : Providing, fixing and testing white vitreous china extended wall mounting water closet of approved shape including providing ; fixing white vitreous china cistern with dual flush fitting including seat cover, and cistern fittings, nuts bolts and gasket etc complete with maximum flow rate of 2/4 lpf or lower as per GRIHA norms as required by the Engineer in Charge(Models- Hindware 20096+21056/Cera S1031101SN+S1062128SN+B1510101SN) or equivalent

HT EQUIPMENTS

od336460/2021_2022 : HT Metering Panel with LBS Supply, installation, testing and commissioning of HT metering Panel with 630A Load Break Switch with HT fuse and Earth switch, Bidirectional TOD meter (with RS485 communication facility), CTs(0.2S) and PT(0.2) , HT fuses, test terminal block, control fuses, etc. The Panel shall be made out of 2mm thick CRCA sheet steel, totally enclosed, IP 54 with canopy, weather proof, undergone seven tank process with powder coated finish. The Panel should have seal Off bushings, space Heater with thermostat, 630A Copper busbars and support insulators, provision for earthing, all mounting accessories as required complete as per the requirement of Kerala State Electricity Board. The metering cubicle shall have glass window for meter reading.

od338773/2021_2022 : 11kV Outdoor RMU panel (Extensible Type) Design, Fabrication, Supply, Installation Testing and Commissioning of 11KV electrically Operated 21kA for 3 sec, 630A SF6 Insulated,Ring Main Unit outdoor type (IP-54) with one motorized Load Break Switch as incomer and 2 no motorized VCB (fully rated earth switch) with fully encapsulated vacuum interrupter panel, 630 Amp continously rated Cu busbar complete with all accessories, protective relays, indicators, battery and battery charger, Manometer for indicating SF6 gas pressure with green zone marked on the scale,provision for padlocking for open, close, earth and test position etc. on a suitable foundation. The RMU must be both side extensible type and compatible for SCADA system .The rate quoted shall be inclusive of hoisting to its location,assembling of units,lining up, bolting the units and checking all control wiring complete as per single line diagram & technical specification.

od338774/2021_2022 : 11kV Indoor RMU panel (Extensible Type) Design, Fabrication, Supply, Installation Testing and Commissioning of 11KV electrically Operated 21kA for 3 sec, 630A SF6 Insulated,Ring Main Unit indoor type (IP-42) with 2 nos motorized Load Break Switch as incomer and 3 nos motorised VCB (fully rated earth switch) with fully encapsulated vacuum interrupter panel, 630 Amp continuously rated Copper busbar complete with all accessories, protective relays, indicators, Hooter ,battery and battery charger, Manometer for indicating SF6 gas pressure with green zone marked on the scale,provision for padlocking for open, close, earth and test position etc. on a suitable foundation. The RMU must be both side extensible type and compatible for SCADA system .The rate quoted shall be inclusive of hoisting to its location,assembling of units,lining up, bolting the units and checking all control wiring complete as per single line diagram & technical specification.

od338889/2021_2022 : 11kV Indoor RMU (Extensible Type) Design, Fabrication, Supply, Installation Testing and Commissioning of 11KV electrically Operated 21kA for 3 sec, 630A SF6 Insulated,Ring Main Unit outdoor type (IP-42) with 2 nos Load break switch as incomer and 2 nos motorized VCB (fully rated earth switch) with fully encapsulated vacuum interrupter panel as outgoings, 630 Amp continously rated Cu busbar complete with all accessories, protective relays, indicators,battery and battery charger, Manometer for indicating SF6 gas pressure with green zone marked on the scale,provision for padlocking for open, close, earth and test position etc. on a suitable foundation. The RMU must be both side extensible type .The rate quoted shall be inclusive of mounting accessories, hoisting to its location,assembling of units,lining up, bolting the units and checking all control wiring complete as per single line diagram & technical specification.

od338890/2021_2022 : 11kV Outdoor RMU (Extensible Type) Design, Fabrication, Supply, Installation Testing and Commissioning of 11KV electrically Operated 21kA for 3 sec, 630A SF6 Insulated,Ring Main Unit outdoor type (IP-54) with 2 nos Load break switch as incomer and 1 no motorized VCB (fully rated earth switch) with fully encapsulated vacuum interrupter panel as outgoings, 630 Amp continously rated Cu busbar complete with all accessories, protective relays, indicators,battery and battery charger, Manometer for indicating SF6 gas pressure with green zone marked on the scale,provision for padlocking for open, close, earth and test position etc. on a suitable foundation. The RMU must be both side extensible type .The rate quoted shall be inclusive of required foundation, mounting accessories, hoisting to its location,assembling of units,lining up, bolting the units and checking all control wiring complete as per single line diagram & technical specification.

TRANSFORMER AND ACCESSORIES

od326788/2021_2022 : Unitised Substation- 1000kVA Design, fabrication,Supply, installation, testing and commissioning of indoor type Unitized Substation, 1000 kVA, 11kV/433V 3 Ph, 50 Hz, vector Dyn -11, dry type, Transformer with IP23 enclosure, winding temperature alarm and trip of transformer compartment and LV chamber suitable for termination of cable, complete with all standard fittings and accessories etc including necessary louvers and as per specifications attached in all respects as required. It shall includes all necessary control cabling for alarm, tripping & indication, all internal cabling as required. The rate shall be inclusive of all materials, lead, lift, necessary civil works etc. complete as per single line diagram & technical specification. HT Chamber 630A 25kA(1SEC) 11kV VCB Transformer Compartment 1000kVA, 11kV/433V 3 Ph, 50Hz, DRY type, vector Dyn -11 Transformer, copper wound, Class F insulation, outdoor distribution Transformer with necessary cooling and ventilation arrangement. Losses shall be as per ECBC guidelines amended upto date. The transformer shall have Delta on HV side and Star on LV side with off load tap changer range: + 10% to -10% in steps of 2.5%. "The transformer shall have suitable enclosure for providing neutral CT of 300/5A 15VA 5P10 on earthed star point with connector for connection Earth Fault relay in HT/LT and neutral Special Protection CT of 1600/5A Class PS on earthed star neutral point with connector for connection to REF relay provided in HT/LT panel. LT Chamber: Suitable for terminating 2000A Sandwich busduct

od326516/2021_2022 : UNITIZED SUBSTATION- 630KVA Design, fabrication,Supply, installation, testing and commissioning of indoor type Unitized Substation including foundation for 630 kVA, 11kV/433V 3 Ph, 50 Hz, vector Dyn -11, dry type, Transformer with IP 23D enclosure, winding temperature alarm and trip on transformer compartment and LV chamber suitable for termination of cable, complete with all standard fittings and accessories etc including necessary louvers and as per specifications attached in all respects as required. It shall includes all necessary control cabling for alarm, tripping & indication, all internal cabling as required. The rate shall be inclusive of all materials, lead, lift, necessary civil works etc. complete as per single line diagram & technical specification. HT Chamber 630 A 26.2kA 11kV LBS with earth switch Transformer Compartment 630kVA, 11kV/433V 3 Ph, 50Hz, DRY type, vector Dyn -11 Transformer, copper wound, Class F insulation, outdoor distribution Transformer with necessary cooling and ventilation. Losses shall be as per ECBC guidelines amended upto date. The transformer shall have Delta on HV side and Star on LV side with off load tap changer range: + 10% to -10% in steps of 2.5%. The transformer shall also have suitable enclosure including supply and fixing of neutral CT of 200/5A 10VA 5P10 on earthed star point with connector for connection to Earth Fault relay in LT side. LT Chamber: 1000A, TP+NL, 50 kA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 1 No. Suitable for terminating 4 RUN x400 sq.mm cable.

DG SET AND ACCESSORIES

od323150/2021_2022 : 1250 KVA DG Set Supply, Installation, Testing and Commissioning of 1250kVA prime rated D.G Set with acoustic enclosure and Control panel ,protection and digital metering, controls and interlocks, CTs and transducers for all metering and protection and suitable FP ACB etc., including antivibration mountings, exhaust silencer and exhaust pipe conforming to latest environment protection regulations for emission and noise levels complete with , water/ coolant cooled, (radiator type) four stroke, electric start conforming to BS: 5514 1250 kVA prime rating, brushless, self excited, self regulated and suitable for continuous operation at 1500rpm, generating 415 V+/-5% Volts at 0.8 p.f (lag), 50Hz,3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads, battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank for 8 hours suitable continuous operation, fuel piping from fuel tank to Engine, Residential silencer, insulated Exhaust piping to height as CPCB norms, support structure, internal cablings, internal earthing, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications. The work should be as per Electrical Inspectorate/ Central Pollution control board standards applicable at the time of delivery.

od326519/2021_2022 : 250 kVA DIESEL GENERATOR Supply, Installation, Testing and Commissioning of 250 kVA prime rated D.G Set with acoustic enclosure and Control panel ,protection and digital metering, controls and interlocks, CTs (including supply an fixing of neutral CT) and transducers for all metering and protection and suitable FP MCCB etc. , including antivibration mountings, exhaust silencer and exhaust pipe conforming to latest environment protection regulations for emission and noise levels complete with , water/ coolant cooled, (radiator type) four stroke, electric start conforming to BS: 5514 250 kVA prime rating, brushless, self excited, self regulated and suitable for continuous operation at 1500rpm, generating 415 V+/-5% Volts at 0.8 p.f (lag), 50Hz,3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads, battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank for 8 hours suitable continous operation, fuel piping from fuel tank to Engine, Residential silencer, insulated exhaust pipe to an height as per Norms, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications. The work should be as per Electrical Inspectorate/ Central Pollution control board standards applicable at the time of delivery."

LT PANEL AND ACCESSORIES

3.13.5 : Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required1000 amps 50 KA SC for 1 sec

3.13.7 : Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required1600 amps 50 KA SC for 1 sec

3.13.8 : Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required2000 amps 50 KA SC for 1 sec

od335564/2021_2022 : Supply , Installation, Testing and Commissioning of 10 kVA, three phase input, three Phase output, true on-line UPS system with 15 minutes back up , output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc as required complete having following specification.The UPS system consist of one numbers of UPS unit and one set of battery bank . Refer technical specification and drawing for details. Fully digital controlled based on DSP, Power factor corrected from end > 0.9, Pure sine wave output, Full time output voltage & frequency regulation, Auto regulation of battery end voltage, Intelligent interface with LED/LCD display, Static bypass switch / manual by pass switch, Auto temperature compensation

od335565/2021_2022 : Supply , Installation, Testing and Commissioning of 7.5 kVA(or nearest higher rating), three phase input, Single Phase output, true on-line UPS system with 15 minutes back up , output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc as required complete having following specification.The UPS system consist of one numbers of UPS unit and one set of battery bank . Refer technical specification and drawing for details. Fully digital controlled based on DSP, Power factor corrected from end > 0.9, Pure sine wave output, Full time output voltage & frequency regulation, Auto regulation of battery end voltage, Intelligent interface with LED/LCD display, Static bypass switch / manual by pass switch, Auto temperature compensation.

od335587/2021_2022 : Supply , Installation, Testing and Commissioning of 30 kVA, three phase input, three Phase output, true on-line UPS system with 15 minutes back up , output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc as required complete having following specification.The UPS system consist of one numbers of UPS unit and one set of battery bank . Refer technical specification and drawing for details. Fully digital controlled based on DSP, Power factor corrected from end > 0.9, Pure sine wave output, Full time output voltage & frequency regulation, Auto regulation of battery end voltage, Intelligent interface with LED/LCD display, Static bypass switch / manual by pass switch, Auto temperature compensation.

od337292/2021_2022 : Outdoor Lighting Panel (ODP) "Supply, Installation, Testing and Commissioning of Outdoor Lighting Panel (ODP) cubicle type, totally enclosed, IP 65, pedestal mounted, free standing with top canopy, dust and vermin proof, water proof suitable for operation on 3 phase, 415 V, 50Hz AC supply with provision for fixing incoming & outgoing switches fabricated using 2mm thick CRCA sheet, powder coated, including internal wiring with suitable size wires/cable, interconnection, duly powder coated painting etc., The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) including following switchgears accessories for the LT Panel. All necessary mounting accessories as required complete with civil foundation.The panel shall be with all accessories as per drawing & specification. INCOMER 63 A, FP, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1 No BUSBARS 63 Amp TPN Al busbar INSTRUMENTS Surge protection device -Type1+2-As per SLD (0-63)A ammeter Acc. class 1 with 90 deg defl. scale - As per SLD 4A, C curve SP MCB - As per SLD RYB indication lamp, LED type - As per SLD 24 hrs Digital time switch with inbuilt battery - As per SLD 63A, AC-1 contactor - As per SLD OUTGOINGS 16 A, FP RCCB + MCB (100mA)- 5 Nos 16 A C Curve DP RCCB + MCB-3no.

od58392/2022_2023 : Supply installation testing commissioning of Three Phase multifuction meter with RS 485 communication class 1 accuracy with parameters such as V, A, F, PF, kW, kVA, kWh/ kVAh in the existing panel including all accessories, wiring etc as required.

od326786/2021_2022 : Supply, installation, testing and commissioning of 175 kVA Modular UPS system with dual string battery bank. The UPS system consists 25kVA UPS modules of three phase in and out with built in Parallel redundant configurations. The UPS system should have inbuild surge protection system. The battery bank with 30 min backup @ 175 kW with dual string with separate isolation for each battery bank. The system shall be true online double - conversion DSP based UPS system and UPS shall be with automatic & manual bypass switch. The UPS system should have Input pf 0.99, Input THDi < 3%,IP-42, double conversion technology with input 400V, 50Hz three phase, output 400V, 50Hz three phase, SNMP card for network monitoring, BMS compatibility etc. The UPS shall be 100% generator compatible, with Efficiency > 96 % and output power factor Unity (175kVA = 175 kW), including all accessories etc as required. The system shall comply to IEC /EN 62040-1, EN/IEC 62040-2, EN/IEC 62040-3 and relevant IS standard. The UPS frame should have provision for expansion of additional 1 more UPS modules. Item includes all necessary accessories required complete.

CABLES AND CABLINGS- HT CABLES

8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm

8.3.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm

8.4.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.Above 120 sq. mm and upto 400 sq. mm

10.4.3 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:240 sq. mm

10.4.4 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm

10.5.4 : Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm

10.6.3 : Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :240 sq. mm

10.6.4 : Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm

od321076/2021_2022 : Supply of 3C X 240 sq.mm size XLPE insulated PVC sheathed, Aluminium conductor armoured power cable of 11 KV grade conforming to IS 7098 amended upto date.

od321077/2021_2022 : Supply of 3C X 300sq.mm size XLPE insulated PVC sheathed, Aluminium conductor armoured power cable of 11 KV grade conforming to IS 7098 amended upto date.

7.9 : Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

LT CABLES

7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm

7.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm

7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

7.1.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm

7.2.1 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm

7.2.2 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm

7.2.3 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

7.2.4 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm

7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

7.5.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 35 sq. mm and upto 95 sq. mm

7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm

7.5.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 185 sq. mm and upto 400 sq. mm

7.6.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm

7.6.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 35 sq. mm and upto 95 sq. mm

7.6.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 95 sq. mm and upto 185 sq. mm

7.6.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 185 sq. mm and upto 400 sq. mm

7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.7.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

7.7.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

7.7.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

7.8.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

7.10 : Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

od320869/2021_2022 : Supply of following 3.5C 120 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320870/2021_2022 : Supply of following 3.5C 400 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320871/2021_2022 : Supply of following 3.5C 240 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320872/2021_2022 : Supply of following 3.5C 185 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320874/2021_2022 : Supply of following 3.5C 95 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320875/2021_2022 : Supply of following 3.5C 70 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320877/2021_2022 : Supply of following 4C 35 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320878/2021_2022 : Supply of following 4C 25 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320879/2021_2022 : Supply of following 4C 10 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320880/2021_2022 : Supply of following 3.5C 400 sqmm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Copper conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320881/2021_2022 : Supply of following 4C 4 sqmm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Copper conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320882/2021_2022 : Supply of following 3C 4 sqmm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Copper conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320883/2021_2022 : Supply of following 2C 4 sqmm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Copper conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320884/2021_2022 : Supply of following 2C 2.5 sqmm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Copper conductor cable conforming to IS 7098 (Part 1) amended upto date.

od320885/2021_2022 : Supply of following 4C 1.5 sqmm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Copper conductor cable conforming to IS 7098 (Part 1) amended upto date.

od326406/2021_2022 : Supply of following 3C 10 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od321082/2021_2022 : Supply of following 4C 16 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

9.1.7 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)

9.1.9 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 25 sq. mm (25mm)

9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

9.1.31 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)

9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

9.1.35 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm)

14.13.1 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 50 mm dia

14.13.3 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia

14.14.1 : Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.100 mm dia

14.14.4 : Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.300 mm dia

od322613/2021_2022 : Supply of following 3C 25 sqmm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od322719/2021_2022 : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 3 1/2X 400 sq. mm (82mm)

od325352/2021_2022 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness

od325355/2021_2022 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required 150 MM WIDTH X 50 MM DEPTH X 2 MM THICK

od325362/2021_2022 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required 300 MM WIDTH X 50 MM DEPTH X 2 MM THICK

od325364/2021_2022 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required 450 MM WIDTH X 50 MM DEPTH X 2 MM THICK

od325365/2021_2022 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required 600 MM WIDTH X 50 MM DEPTH X 2 MM THICK

od326368/2021_2022 : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 4X1.5 sq. mm Cu

od326369/2021_2022 : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 2X2.5 sq. mm Cu

od326370/2021_2022 : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 2X4 sq. mm Cu

od326371/2021_2022 : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 3X4 sq. mm Cu

od326372/2021_2022 : Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 4X4 sq. mm Cu

od326793/2021_2022 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 MM WIDTH X 50 MM DEPTH X 2 MM THICK

od326794/2021_2022 : Providing & fixing Fire Barrier mortar with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical openings in walls for passing service shafts. The service lines could be of various types like electrical cables trays, metal pipes, GI Ducts for AC, etc.The mortar shall have minimum hardened density of 0.8 g/cm3 and It should have a compressive strength of 2.9N/Sq mm . The product shall be Smoke & Air Seal and 30 years Age tested as per Dafstb and DIBT standards. The product shall be tested and approved by third party agencies such as UL and FM. The mortar should be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall bear the UL and FM approval logo on the packing where applicable.

od326795/2021_2022 : Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of primer and two coats of synthetic enamel paint as required

od348673/2021_2022 : Supply of following size 1.1 kV grade XLPE insulated, PVC sheathed, armoured Aluminium/copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 2C X 1.5sqmm Cu

od348828/2021_2022 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 2 C 1.5 Sq.mm Cu

WIRING AND ACCESSORIES

1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.14.9 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire

1.14.10 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 10 sq. mm + 2 X 6 sq. mm earth wire

1.17.2 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

1.17.31 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

1.24.8 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.38 : Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

od333199/2021_2022 : Supply, fixing of Network point, UTP RJ45, CAT 6 modular type socket with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box, inter connection etc as required complete.

od335503/2021_2022 : supplying and Laying of PVC cable management system of size 100mmx50mm along with all accessories such as flexible cover, base joint, end cap, flat angles, flat junctions, external angles etc as required complete.

od335504/2021_2022 : Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including providing and fixing in PVC Truncking with suitable boxes etc, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL)

od335524/2021_2022 : Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL)

od333305/2021_2022 : Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL)

od336458/2021_2022 : Supply and fixing of heavy duty in-screed floor box for 300mm wide GI truncking with all necessary accessories as required complete.

od336459/2021_2022 : Supply & fixing of 300 x 38 x 1.6 mm 3 compartment GI under floor trunking made out of 1.6mm pregalvanised sheet metal with zinc coated steel sheet double folded and arc welded including all accessoires like jointing sleeve, vertical and horizontal bends, end cover etc required for the complete installation of the trunking system including cutting the floor if required and making good the same as required.

MCBs AND DISTRIBUTION BOARDS

2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.4.1 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door

2.4.2 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door

2.4.3 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door

2.5.1 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door

2.5.2 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door

90.11.1.15 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.11.1.18 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.11.1.20 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+24) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

od332207/2021_2022 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required 150 MM WIDTH X 50 MM DEPTH X 2 MM THICK

od332208/2021_2022 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required 300 MM WIDTH X 50 MM DEPTH X 2 MM THICK

od332209/2021_2022 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required 450 MM WIDTH X 50 MM DEPTH X 2 MM THICK

od332210/2021_2022 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required 600 MM WIDTH X 50 MM DEPTH X 2 MM THICK

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.2.13 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required100 Amp, 30 KA 4 Pole

2.2.14 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required125 Amp, 36 KA

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

od323009/2021_2022 : Supply and fixing of following rating residual current circuit breaker with MCB (RCCB+MCB) as per specification in existing DB including all interconnection etc completes as required. 4 pole 63 amps. (415 Volts), 100mA sensitivity

od323010/2021_2022 : Supply and fixing of following rating residual current circuit breaker with MCB (RCCB+MCB) as per specification in existing DB including all interconnection etc completes as required. 2 pole 25 amps. (415 Volts), 30mA sensitivity

od323011/2021_2022 : Supply and fixing of following rating residual current circuit breaker with MCB (RCCB+MCB) as per specification in existing DB including all interconnection etc completes as required. 4 pole 25 amps. (415 Volts), 30mA sensitivity

od323064/2021_2022 : Supplying and fixing 40-63 amps rating, 240/415 volts, FP, "C" curve, miniature circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc. as required.

od323065/2021_2022 : Supply and fixing of following rating residual current circuit breaker with MCB (RCCB+MCB) as per specification in existing DB including all interconnection etc completes as required. 4 pole 40 amps. (415 Volts), 30mA sensitivity

od323066/2021_2022 : Supply and fixing of following rating residual current circuit breaker with MCB (RCCB+MCB) as per specification in existing DB including all interconnection etc completes as required. 4 pole 40 amps. (415 Volts), 100mA sensitivity

od323086/2021_2022 : Supplying and fixing 40-63 amps rating, 240/415 volts, TP, "C" curve, miniature circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

2.18 : Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

2.24.1 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 4 way, Double door TPN MCBDB

2.24.2 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door TPN MCBDB

2.24.3 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 8 way, Double door TPN MCBDB

od335707/2021_2022 : Supply and fixing of 32 amps, 230 volts, SPN Plug & Socket DB, 2P+E, plastic plug and socket along with 32 amps “C” curve, DP MCB, in sheet steel enclosure, on surface or in recess, complete with connections, testing and commissioning etc. as required.

od335709/2021_2022 : Supply and fixing outdoor type START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.

od331858/2021_2022 : Supply, Installation, Testing & Commissioning of following rating isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete. 63A FP isolator

od332217/2021_2022 : Supply, Installation, Testing & Commissioning of 400 A FP MCCB type Isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

od336236/2021_2022 : Supply, Installation, Testing & Commissioning of 100 A FP MCCB type isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, operating handles, spreaders, internal wiring etc as required complete.

od336237/2021_2022 : Supply, Installation, Testing & Commissioning of 125 A FP MCCB type isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, operating handles, spreaders, internal wiring etc as required complete.

od336238/2021_2022 : Supply, Installation, Testing & Commissioning of 25/32 A DP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

od336239/2021_2022 : Supply, Installation, Testing & Commissioning of 63 A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

od336240/2021_2022 : Supply installation, testing and commissioning of FASD starter in sheet steel enclosure for motor upto 25 HP , 3 PHASE, including auxilliary contactors, suitable rated capacitor, meters, and all necessary accessories as required. complete.

od336241/2021_2022 : Supply installation, testing and commissioning of FASD starter in sheet steel enclosure for motor upto 10 HP , 3 PHASE, including auxilliary contactors, suitable rated capacitor, meters, and all necessary accessories as required. complete.<

od336351/2021_2022 : Supply, Installation, Testing & Commissioning of 100 A FP MCCB type isolator in Weather proof(IP54) sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

od336352/2021_2022 : Supply, Installation, Testing & Commissioning of 63 A FP isolator in Weather proof(IP54) sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

od336353/2021_2022 : Supply, Installation, Testing & Commissioning of 25/32 A FP isolator in Weather proof(IP54) sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

od336354/2021_2022 : Supply and fixing of 63 amps, 415 volts, TPN Plug & Socket DB, 3P+N+E, plastic plug and socket along with 63 amps “C” curve, FP MCB, in sheet steel enclosure, on surface or in recess, complete with connections, testing and commissioning etc. as required.

od336355/2021_2022 : Supplying and fixing 63 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 63 amps “C” curve, FP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

od336356/2021_2022 : Supply and fixing of 32 amps, 415 volts, TPN Plug & Socket DB, 3P+N+E, plastic plug and socket along with 32 amps “C” curve, FP MCB, in sheet steel enclosure, on surface or in recess, complete with connections, testing and commissioning etc. as required.

od336357/2021_2022 : Supply, Installation, Testing & Commissioning of 40 A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

od336358/2021_2022 : Supply, Installation, Testing & Commissioning of 25/32 A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

od336382/2021_2022 : Supply, Installation, Testing & Commissioning of 200 A FP MCCB type isolator in Weather proof(IP54) sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

od336383/2021_2022 : Supply, Installation, Testing & Commissioning of 125 A FP MCCB type isolator in Weather proof(IP54) sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

2.20 : Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

2.25 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for tripple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.

LIGHT FIXTURES AND FANS

od331606/2021_2022 : Supply of 450 mm sweep,1400 rpm heavy duty exhaust fan with self opening louvers working on 230 V AC supply complete with all accessories as required.

od331607/2021_2022 : Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required.

od331608/2021_2022 : Supply of indoor recess LED Downlighter with diecast aluminum housing and Polycarbonate diffuser, along with driver, maximum system wattage of 9W, lumen output greater than 900 lumens, power factor >0.95, rated life of L70 @ 50,000 hours, CRI greater than 80, Internal Surge protection Device 2kV, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.

od331609/2021_2022 : Supply of indoor recess LED Downlighter with diecast aluminum housing and Polycarbonate diffuser, along with driver, maximum system wattage of 12W, lumen output greater than 1200 lumens, power factor >0.95, rated life of L70 @ 50,000 hours, CRI greater than 80, Internal Surge protection Device 2kV, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.

od331611/2021_2022 : Supply of indoor Industrial LED Batten with extruded aluminum housing and Polycarbonate diffuser, along with driver, maximum system wattage of 40W, lumen output greater than 4000 lumens, power factor >0.95, rated life of L70 @ 50,000 hours, CRI greater than 80, THD less than 10% with internal Surge protection Device 4kV, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.

od331574/2021_2022 : Supply of indoor recess LED Downlighter with diecast aluminum housing and Polycarbonate diffuser, along with driver, maximum system wattage of 18W, lumen output greater than 1800 lumens, power factor >0.95, rated life of L70 @ 50,000 hours, CRI greater than 80, Internal Surge protection Device 2kV, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.

od331612/2021_2022 : Supply of Outdoor Industrial LED Batten, totally enclosed, along with driver, maximum system wattage of 40W, IP65, lumen output greater than 4000 lumens, power factor >0.95, rated life of L70 @ 50,000 hours, CRI greater than 80, THD less than 10% with internal Surge protection Device 4kV, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.

od331614/2021_2022 : Supply of indoor Decorative LED Batten with extruded aluminum housing and Polycarbonate diffuser, along with driver, maximum system wattage of 20W, lumen output greater than 2000 lumens, power factor >0.95, CRI greater than 80, rated life of L70 @ 50,000 hours, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.

1.41 : Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

od331654/2021_2022 : Installation, testing and commissioning of Wall fan, including all the supports as required and wiring using 3 runs of 1.5 sqmm FR PVC insulated stranded copper conductor etc complete.

1.47 : Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.

1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep

90.15.4.1 : Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

od333693/2021_2022 : Supply of indoor recess mounted LED panel light fixture(2x2) with housing made of powder coated CRCA sheet and Polycarbonate diffuser, along with driver, maximum system wattage of 36W, lumen output greater than 3600 lumens, power factor >0.95, rated life of L70 @ 50,000 hours, CRI greater than 80, THD less than 10% with internal Surge protection Device 4kV, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.

od331668/2021_2022 : Supply of 10w LED Bulk head fitting with die cast aluminium housing, PC diffuser and IP65 Protection suitable for wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire and making good the surface as required.

od333694/2021_2022 : Supply of Recessed Mounted LED COB Downlighter with a minimum system lumen output of 4100 lumens, Narrow Beam angle. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have CRI>80, PF > 0.95. The housing should made of pressure die cast. The total power consumption should not exceed 41W (including driver).

od333695/2021_2022 : Supply of indoor Decorative LED Batten with extruded aluminum housing and Polycarbonate diffuser, along with driver, maximum system wattage of 10W, lumen output greater than 1000 lumens, power factor >0.95, CRI greater than 80, rated life of L70 @ 50,000 hours, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.

od333696/2021_2022 : Supply of indoor recess LED Downlighter with diecast aluminum housing and Polycarbonate diffuser, along with driver, maximum system wattage of 15W, lumen output greater than 1500 lumens, power factor >0.95, rated life of L70 @ 50,000 hours, CRI greater than 80, Internal Surge protection Device 2kV, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.

od333734/2021_2022 : Installation, testing and commissioning of LED down lighter fittings on false ceiling with all mounting accessories as required complete including interconnections using 3 runs of 1.5 sqmm FRLSH PVC insulated stranded copper conductor as required.

od333735/2021_2022 : P/F extra chain with copper wiring- Providing and fixing extra chain 2x10 cm length with using 3 runs of 1.5 sqmm FR PVC insulated stranded copper conductor including painting etc. as required. (more than 5 cm length shall be rounded to the nearest 10 cm. and 5cm or less shall be ignored)

od333736/2021_2022 : Installation, testing and commissioning of LED fittings with GI chain - Installation testing and commissioning of prewired fluorescent / LED fittings of all types complete with all accessories, lamps etc. on false ceiling including supplying and fixing of GI chain and hook arrangement, upto 60cm length, and wiring using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor cable as required.

od333737/2021_2022 : Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.(Rate shall inclusive of supply and installation of remote/electronic regulator)

15.1 : Supplying,Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 Mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming and site etc. complete as required

od332846/2021_2022 : Supply of 450 mm size Industrial wall mounting oscillating type fan having three speed control, oscillation control at bottom and suitable for operation on single phase 230 volt, 50Hz AC supply complete with continuous duty motor, chrome plated front and rear gaurds and all accessories as required complete.

od138821/2022_2023 : Supply of 18W(+/-2), High efficient surface mounted LED round downlighter with white powder coated, Aluminium die cast aluminium housing. High transmittivity polycarbonate diffuser provides soft light. CRI>80, IP20, Ambient temp-0 to 45DegC, 50,000 hrs @ L70 life.THD<10%, Powerfactor>0.9, Surge protection-2 kV, Inbuilt electronic driver, luminaire efficacy > 100 lm/W including all accessories necessary as required to complete installation.

15.2 : Supplying, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor with day light dimming (lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection .) having high preformance, regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

od333827/2021_2022 : Supply of indoor surface mounted LED Downlighter with diecast aluminum housing and Polycarbonate diffuser, along with driver, maximum system wattage of 18W, lumen output greater than 1800 lumens, power factor >0.95, rated life of L70 @ 50,000 hours, CRI greater than 80, Internal Surge protection Device 2kV, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.

od333829/2021_2022 : Supply, installation, Testing and Commissioning of 400 mm size wall fan having speed control, oscillation control at bottom and suitable for operation on single phase 230 volt, 50Hz AC supply complete with continuous duty motor and all accessories as required complete.

od336453/2021_2022 : Supply of recess mounted LED panel(2x2) light fixture light made of CRCA white powder coated housing, along with driver suitable for DALI control, system wattage of 50 Watts with lumen output of lamp not less than 5500 lumens, power factor > 0.96, rated life of L70 @ 50,000 hours, system efficacy greater than 110 lumen/watt and including all necessary accessories as required complete.

od336454/2021_2022 : Supply installation, Testing and commissioning of decorative wall light LED along with driver, system wattage maximum of 12(+/-2W) Watts, lumen output of lamp greater than 800 lumens, power factor > 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 80lumen/watts, with suitable driver and including all necessary accessories as required complete.

od336455/2021_2022 : Supply and installation, testing and commissioning of of decorative outdoor up down LED fitting with extruded aluminium square tube with die cast aluminium frame along with driver, system wattage maximum of 2x 18 Watts, IP 65, power factor > 0.9 including all necessary accessories as required complete.

od336456/2021_2022 : Supply, Installation, Programming, Testing and Comissioning of DALI Controllers with following specifications Supply: 230V ±14% 50Hz Single Phase Output Capacity: Minimum 3 DALI Outputs, up to 192 DALI devices including 3 x 20 A feed-through switched circuits' for DALI driver mains supply

od336457/2021_2022 : Supply, Installation, Programming, Testing and Commissioning of DALI Networkable 5/8 Button User Interface Keypad . Button freely configurable for Scenes / Individual load control.

EARTHING AND SAFETY EQUIPMENTS

od325354/2021_2022 : Supply and fixing single line diagram, schematic diagrams etc. of A1 size on suitable Aluminium sheet including lamination etc. as required complete on wall.

od325356/2021_2022 : Supply and fixing anodised aluminum glass framed shock treatment chart.

od325357/2021_2022 : Supplying of Rubber hand gloves suitable for 11 KV.

od325358/2021_2022 : Supply and fixing of First aid box

od336228/2021_2022 : Supply and fixing of fire retardant/extinguishing electrical insulated synthetic mat of 2m x 1m x 2.5 mm for 11kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of IS:15652:2006 (with upto date amendment), suitable for 11kV voltage and having minimum width of 1000mm +/- 20mm and including supply of required quantity of adhensive / compound .

od325359/2021_2022 : Earthing with C.I. earth pipe 3 metre long, 100 mm dia including accessories, and providing masonry enclosure with heavy duty CI cover plate of 600X600mm having locking arrangement and watering pipe etc. with 64kg charcoal/ coke and 5kg salt as required. (As per IS 3043 ammended uptodate)

2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

2.22 : Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.9 : Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

5.15 : Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

5.7 : Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

5.8 : Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

5.18 : Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

5.14 : Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

5.17 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

5.16 : Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

5.19 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

od335512/2021_2022 : Supplying and laying 50mm X 6mm GI G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

od335513/2021_2022 : Providing and fixing 50mm X 6mm GI strip on surface or in recess for connections/terminations etc. as required complete.

od336216/2021_2022 : Providing and fixing of 3.15mm Cu (10 SWG) GI/Cu strip/wire on surface or in recess for connections etc. as required.

od335514/2021_2022 : Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 50mm X10mm GI

od335515/2021_2022 : Supply and fixing of of fire retardant/extinguishing electrical insulated synthetic mat of 2m x 1m x 2 mm for 3.3kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of IS:15652:2006 (with upto date amendment), suitable for 3.3kV voltage and having minimum width of 1000mm +/- 20mm and including supply of required quantity of adhensive / compound .

od335516/2021_2022 : Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required. 50mm X10mm GI

od336217/2021_2022 : Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 3.15mm Cu (10 SWG)

od331460/2021_2022 : Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required. 3.15mm Cu (10 SWG)

LIGHTNING PROTECTION

od326913/2021_2022 : Providing and fixing of test joint suitable for hot dipped galvanized steel tape 30 mm x 3mm and 8mm dia solid round aluminium conductor made of stainless steel SS 304 grade. Conforms to the requirements according to (IS/IEC 62305).with an outdoor glass-fibre reinforced polycarbonate enclosure having minimum inner dimension of 75mm x 75 mm x 50 mm.

od326915/2021_2022 : Supply and fixing of 8 mm Aluminum Round Conductor as down conductor with the required mounting clamps , cross connectors , expansion piece and other accessories required as per IEC 62305-3

od331344/2021_2022 : Supply and fixing of 8 mm Aluminum Round Conductor as horizontal air terminal for parapet wall/terrace with the required mounting clamps , cross connectors , expansion piece and other accessories required as per IEC 62305-3

6.14 : Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.

od333819/2021_2022 : Supply, installation ,testing and commissioning of maintenance free earthing using 3 mtrs length, 17.2mm dia 250 microns molecularly copper bonded steel rod, stainless steel connectors and fasteners for connecting earth strip. The earth electrode shall be filled with earth enhancing compound (12.5 kg mineral compound/ 22.6 kg low resistivity graphite compound).FRP (UFE FRP)Earth electrode inspection chamber with heavy duty cover should be used to cover the Earth Rod. The dimension shall be 300mmx 300mmx 300mm with a weight bearing capacity of 15KN.The item shall be inclusive of installation charges, including digging bore, providing all required accessories like terminal connector, screw for fixing earth pit cover etc.

od335588/2021_2022 : Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 3.15mm Cu (10 SWG)

od335589/2021_2022 : Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required. 3.15mm Cu (10 SWG)

EXTERNAL LIGHTING

90.15.3.5 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 7 Meters

90.15.4.3 : Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

od333820/2021_2022 : Supply Installation, Testing and Commissioning of 3m long 60mm dia GI pole with post top light fixture .Pole with built- in control box prewired, including control MCB,four pole connector for easy loop-in loop-out,concealed wiring with 3Cx 2.5 sq.mm copper wire from the control box to light fixture and all other accessories. complete including necessary civil foundation. Along with Decorative indirect top flat post top LED luminarie, IP 65, along with driver,system wattage maximum of 45 watts, 4500 lumens, power factor >0.9,IP 65 compliant including all necessary accessories as required complete.

od333821/2021_2022 : Supply ,Installation,Testing & commissioning of IP65 Bollard light made of aluminium, (CCT 3000K), of height=0.9m, Suitable for operation on 240V, 50Hz single phase ac supply along with driver and surge protection, with maximum system wattage of 8 Watts, luminous efficacy greater than 90lumen/watt, system output > = 720lm, power factor > 0.9, rated life of L70 @ 50,000 hours, and including all necessary accessories as required complete.

od332832/2021_2022 : Outdoor Lighting Panel (ODP) "Supply, Installation, Testing and Commissioning of Outdoor Lighting Panel (ODP) cubicle type, totally enclosed, IP 65, pedestal mounted, free standing with top canopy, dust and vermin proof, water proof suitable for operation on 3 phase, 415 V, 50Hz AC supply with provision for fixing incoming & outgoing switches fabricated using 2mm thick CRCA sheet, powder coated, including internal wiring with suitable size wires/cable, interconnection, duly powder coated painting etc., The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) including following switchgears accessories for the LT Panel. All necessary mounting accessories as required complete with civil foundation.The panel shall be with all accessories as per drawing & specification. INCOMER 63 A, FP, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1 No BUSBARS 63 Amp TPN Al busbar INSTRUMENTS Surge protection device -Type1+2-As per SLD (0-63)A ammeter Acc. class 1 with 90 deg defl. scale - As per SLD 4A, C curve SP MCB - As per SLD RYB indication lamp, LED type - As per SLD 24 hrs Digital time switch with inbuilt battery - As per SLD 63A, AC-1 contactor - As per SLD OUTGOINGS 16 A, FP RCCB (100mA)-6 Nos 16 A C Curve FP MCB-1no.

SOLAR

od349114/2021_2022 : Supply, installation testing and commissioning of 395W MONO PERC module solar photovoltaic panels meeting IEC 61215 (revised) / IS 14286 / IEC 61646 standards & IEC 61730-1 with minimum efficiency of 19.5% with all accessories as per the tender specifiation.

od349154/2021_2022 : Supply, Installation, Testing and Commissioning of Grid Tied solar string inverter of 30kVA rating , IP 66 rated, outdoor, three Phase output, true sinewave inverter system, with Maximum Power Point Tracker charge controller. Inverter should have Minimum 3 MPPTs, with 2 strings per MPPT. Minimum protection required shall be over voltage/surge, over load, short circuit and anti- islanding protection. Earthing shall be provided as per IEC standards. IGBT based true sine wave output. Unity Power factor(30kVA=30kW) . Accuracy of AC voltage control = +/-3%. Accuracy of AC frequency control = +/-1%. Frequency = 50Hz. Intelligent interface with LED/LCD display(Bluetooth/Wifi interface is also acceptable) . .Total Harmonic Distortion <3%”. The inverter should have all specification, protections, operational modes, etc as detailed in technical specification. The inverter should have in-built Type Surge protection device on AC and DC side. The item includes all necessary accessories like supports, canopy, AC Isolation boxes(with energy meter), Junction boxes, Combiner boxes, DCDBs, cabling from AC Isolation boxes to inverter, connectors, etc as required complete as per technical specification.

od349230/2021_2022 : Supply fabrication, erection of Mounting structures for 10 panels with Hot dip galvanized GI rectangular Tubes. The Mounting structure should have 40mm GI angle section for routing 4 Sq. mm DC cables between Modules and Modules to cable trays, including necessary clamps, welding, nuts, bolts, etc. Mounting structure shall be fabricated for group of panels as per technical specification. (Item shall be measured against number of panel)

od349256/2021_2022 : Supply, Installation, Testing and Commissioning of Grid Tied solar string inverter of 15kVA rating , IP 66 rated, outdoor, three Phase output, true sinewave inverter system, with Maximum Power Point Tracker charge controller. Inverter should have Minimum 3 MPPTs, with 2 strings per MPPT. Minimum protection required shall be over voltage/surge, over load, short circuit and anti- islanding protection. Earthing shall be provided as per IEC standards. IGBT based true sine wave output. Unity Power factor(15kVA=15kW) . Accuracy of AC voltage control = +/-3%. Accuracy of AC frequency control = +/-1%. Frequency = 50Hz. Intelligent interface with LED/LCD display(Bluetooth/Wifi interface is also acceptable) . .Total Harmonic Distortion <3%”. The inverter should have all specification, protections, operational modes, etc as detailed in techinical specification. The inverter should have in-built Type Surge protection device on AC and DC side.The item includes all necessary accessories like supports, canopy, AC Isolation boxes(with energy meter), Junction boxes, Combiner boxes, DCDBs, cabling from AC Isolation boxes to inverter, connectors, etc as required complete as per technical specification.

od349279/2021_2022 : Supplying and termination of UV Resistive MC4 Connectors suitable for terminating 4 Sq. mm copper cables(Male & Female Connectors). Y connector at Inverter end also shall be measured under this item. The item includes all necessary accessories tape etc as required complete as per technical specification.

od349280/2021_2022 : Supply and laying of Single core 4 Sq. mm Unarmoured copper Solar cables from Modules to String Combiner / Monitoring Box/inverter. The item includes all necessary accessories clamp, ties etc as required complete as per technical specification.

VRF SYSTEM

od325051/2021_2022 : Supply, Installation ,testing and commissioning of 56 HP capacity of Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with multiple compressors, with variable speed inverter driven compressor as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, structural supports, high-low pressure cut off, with ODU vibration isolators,suction filters for gas line, filter drier & sight glass for liquid line as per specification for each outdoor units , suitable for 3 phase, 415 V, 50Hz supply, All associated electrical works including starter panel, power/control wiring between isolator and single/multiple Indoor/outdoor units ,central controller, along with associated accessories for controlling entire VRF system along with power consumption monitoring of each individual indoor units with Power Distribution Indicator(PDI), wattmeter as required along with suitable interconnecting control cabling between IDUs, ODUs ,structural supports /RCC/ PCC foundation etc. complete in all respects as per the technical specifications.(single feeder power source will be provided for each outdoor units by client )

od325052/2021_2022 : Supply, Installation ,testing and commissioning of 48 HP capacity of Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with multiple compressors, with variable speed inverter driven compressor as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, structural supports, high-low pressure cut off, with ODU vibration isolators,suction filters for gas line, filter drier & sight glass for liquid line as per specification for each outdoor units , suitable for 3 phase, 415 V, 50Hz supply, All associated electrical works including starter panel, power/control wiring between isolator and single/multiple Indoor/outdoor units ,central controller, along with associated accessories for controlling entire VRF system along with power consumption monitoring of each individual indoor units with Power Distribution Indicator(PDI), wattmeter as required along with suitable interconnecting control cabling between IDUs, ODUs ,structural supports /RCC/ PCC foundation etc. complete in all respects as per the technical specifications.(single feeder power source will be provided for each outdoor units by client )

od325053/2021_2022 : Supply, Installation ,testing and commissioning of 38 HP capacity of Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with multiple compressors, with variable speed inverter driven compressor as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, structural supports, high-low pressure cut off, with ODU vibration isolators,suction filters for gas line, filter drier & sight glass for liquid line as per specification for each outdoor units , suitable for 3 phase, 415 V, 50Hz supply, All associated electrical works including starter panel, power/control wiring between isolator and single/multiple Indoor/outdoor units ,central controller, along with associated accessories for controlling entire VRF system along with power consumption monitoring of each individual indoor units with Power Distribution Indicator(PDI), wattmeter as required along with suitable interconnecting control cabling between IDUs, ODUs ,structural supports /RCC/ PCC foundation etc. complete in all respects as per the technical specifications.(single feeder power source will be provided for each outdoor units by client )

od325054/2021_2022 : Supply, Installation ,testing and commissioning of 26HP capacity of Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with multiple compressors, with variable speed inverter driven compressor as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, structural supports, high-low pressure cut off, with ODU vibration isolators,suction filters for gas line, filter drier & sight glass for liquid line as per specification for each outdoor units , suitable for 3 phase, 415 V, 50Hz supply, All associated electrical works including starter panel, power/control wiring between isolator and single/multiple Indoor/outdoor units ,central controller, along with associated accessories for controlling entire VRF system along with power consumption monitoring of each individual indoor units with Power Distribution Indicator(PDI), wattmeter as required along with suitable interconnecting control cabling between IDUs, ODUs ,structural supports /RCC/ PCC foundation etc. complete in all respects as per the technical specifications.(single feeder power source will be provided for each outdoor units by client )

od325055/2021_2022 : Supply, Installation ,testing and commissioning of 24 HP capacity of Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with multiple compressors, with variable speed inverter driven compressor as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, structural supports, high-low pressure cut off, with ODU vibration isolators,suction filters for gas line, filter drier & sight glass for liquid line as per specification for each outdoor units , suitable for 3 phase, 415 V, 50Hz supply, All associated electrical works including starter panel, power/control wiring between isolator and single/multiple Indoor/outdoor units ,central controller, along with associated accessories for controlling entire VRF system along with power consumption monitoring of each individual indoor units with Power Distribution Indicator(PDI), wattmeter as required along with suitable interconnecting control cabling between IDUs, ODUs ,structural supports /RCC/ PCC foundation etc. complete in all respects as per the technical specifications.(single feeder power source will be provided for each outdoor units by client )

od325056/2021_2022 : Supply, Installation ,testing and commissioning of 10HP capacity of Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with multiple compressors, with variable speed inverter driven compressor as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, structural supports, high-low pressure cut off, with ODU vibration isolators,suction filters for gas line, filter drier & sight glass for liquid line as per specification for each outdoor units , suitable for 3 phase, 415 V, 50Hz supply, All associated electrical works including starter panel, power/control wiring between isolator and single/multiple Indoor/outdoor units ,central controller, along with associated accessories for controlling entire VRF system along with power consumption monitoring of each individual indoor units with Power Distribution Indicator(PDI), wattmeter as required along with suitable interconnecting control cabling between IDUs, ODUs ,structural supports /RCC/ PCC foundation etc. complete in all respects as per the technical specifications.(single feeder power source will be provided for each outdoor units by client )

od325057/2021_2022 : Supply, Installation , testing and commissioning of 2 TR minimum capacity ceiling suspended VRFcompatible indoor ductable units with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with power wiring,power/control cabling from power supply, suitable capacity drive motor, with digital thermostat, control wiring, complete with necessary vibration isolators,MERV 8 Filters, CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow with 9mm thick round nitrile rubber insulation with factory laminated 7 mils woven fibre glass cloth including U-trap along with necessary elbows, fittings etc. complete in all respects as per the technical specifications

od325058/2021_2022 : Supply, Installation , testing and commissioning of 2.5 TR minimum capacity ceiling suspended VRFcompatible indoor ductable units with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with power wiring,power/control cabling from power supply, suitable capacity drive motor, with digital thermostat, control wiring, complete with necessary vibration isolators,MERV 8 Filters, CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow with 9mm thick round nitrile rubber insulation with factory laminated 7 mils woven fibre glass cloth including U-trap along with necessary elbows, fittings etc. complete in all respects as per the technical specifications

od325059/2021_2022 : Supply, Installation , testing and commissioning of 3.0 TR minimum capacity ceiling suspended VRFcompatible indoor ductable units with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with power wiring,power/control cabling from power supply, suitable capacity drive motor, with digital thermostat, control wiring, complete with necessary vibration isolators,MERV 8 Filters, CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow with 9mm thick round nitrile rubber insulation with factory laminated 7 mils woven fibre glass cloth including U-trap along with necessary elbows, fittings etc. complete in all respects as per the technical specifications

od325060/2021_2022 : Supply, Installation , testing and commissioning of 3.5 TR minimum capacity ceiling suspended VRFcompatible indoor ductable units with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with power wiring,power/control cabling from power supply, suitable capacity drive motor, with digital thermostat, control wiring, complete with necessary vibration isolators,MERV 8 Filters, CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow with 9mm thick round nitrile rubber insulation with factory laminated 7 mils woven fibre glass cloth including U-trap along with necessary elbows, fittings etc. complete in all respects as per the technical specifications

od325061/2021_2022 : Supply, Installation , testing and commissioning of 4.0 TR minimum capacity ceiling suspended VRFcompatible indoor ductable units with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with power wiring,power/control cabling from power supply, suitable capacity drive motor, with digital thermostat, control wiring, complete with necessary vibration isolators,MERV 8 Filters, CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow with 9mm thick round nitrile rubber insulation with factory laminated 7 mils woven fibre glass cloth including U-trap along with necessary elbows, fittings etc. complete in all respects as per the technical specifications

od325062/2021_2022 : Supply, Installation , testing and commissioning of 4.5 TR minimum capacity ceiling suspended VRFcompatible indoor ductable units with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with power wiring,power/control cabling from power supply, suitable capacity drive motor, with digital thermostat, control wiring, complete with necessary vibration isolators,MERV 8 Filters, CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow with 9mm thick round nitrile rubber insulation with factory laminated 7 mils woven fibre glass cloth including U-trap along with necessary elbows, fittings etc. complete in all respects as per the technical specifications

od325063/2021_2022 : Supply, Installation , testing and commissioning of 5.5 TR minimum capacity ceiling suspended VRFcompatible indoor ductable units with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with power wiring,power/control cabling from power supply, suitable capacity drive motor, with digital thermostat, control wiring, complete with necessary vibration isolators,MERV 8 Filters, CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow with 9mm thick round nitrile rubber insulation with factory laminated 7 mils woven fibre glass cloth including U-trap along with necessary elbows, fittings etc. complete in all respects as per the technical specifications

od325064/2021_2022 : Supply, Installation , testing and commissioning of 7.0 TR minimum capacity ceiling suspended VRFcompatible indoor ductable units with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with power wiring,power/control cabling from power supply, suitable capacity drive motor, with digital thermostat, control wiring, complete with necessary vibration isolators,MERV 8 Filters, CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow with 9mm thick round nitrile rubber insulation with factory laminated 7 mils woven fibre glass cloth including U-trap along with necessary elbows, fittings etc. complete in all respects as per the technical specifications

od325065/2021_2022 : Supply, Installation , testing and commissioning of 11 TR minimum capacity ceiling suspended VRFcompatible indoor ductable units with AHU Kit all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with power wiring,power/control cabling from power supply, suitable capacity drive motor, with digital thermostat, control wiring, complete with necessary vibration isolators,MERV 8 Filters, CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow with 9mm thick round nitrile rubber insulation with factory laminated 7 mils woven fibre glass cloth including U-trap along with necessary elbows, fittings etc. complete in all respects as per the technical specifications

od325066/2021_2022 : Supply, Installation , testing and commissioning of Double skin, sheet metal AIR-HANDLING UNIT for VRF System with required AHU kit as per technical specifications complete with outlet volume control dampers,canvas connections, filter section containing washable synthetic type air filters having extruded Aluminum frame having filtration capacity of 10 micron particle size with an efficiency of 90%, cooling coil of copper tube and aluminium fin construction, drier, , IDU SS drain pan, squirrel cage, TEFC, 3-Ph induction motor, DIDW centrifugal fan, drive package and cushy-foot mounting, all housed inside housing of a double skin construction AHU with vibration isolation arrangement, all associated works including power wiring and power/control cabling(indoor to outdoor)required starter panel & VFD starter , structural supports for fixing IDU, safety devices vibration isolator etc. shall meet adequate external static pressure for the following minimum capacity and the cooling coil (min 4 rows), suitable for three phase 440V supply, CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow etc. Complete in all respects as per technical specifications.(Minimum External Static Pressure 50 mmwc ) 20 TR-10000 CFM

od332410/2021_2022 : Supply, Installation ,testing and commissioning of 44.45mm( 1 3/4 inch) 18 Guage Hard Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

od325068/2021_2022 : Supply, Installation ,testing and commissioning of 41.275 mm( 1 5/8 inch) 18 Guage Hard Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

od325069/2021_2022 : Supply, Installation ,testing and commissioning of 34.925 mm( 1 3/8 inch) 18 Guage Hard Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

od325070/2021_2022 : Supply, Installation ,testing and commissioning of 31.75 mm( 1 1/4 inch) 18 Guage Hard Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

od325072/2021_2022 : Supply, Installation ,testing and commissioning of 28.575 mm( 1 1/8 inch) 18 Guage Hard Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

od325073/2021_2022 : Supply, Installation ,testing and commissioning of 22.22 mm( 7/8 inch) 18 Guage Hard Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

od325074/2021_2022 : Supply, Installation ,testing and commissioning of 19.05 mm( 3/4 inch) 18 Guage Hard Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

od325075/2021_2022 : Supply, Installation ,testing and commissioning of 15.875 mm( 5/8 inch) 18 Guage Hard Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

od325076/2021_2022 : Supply, Installation ,testing and commissioning of 12.7 mm( 1 /2 inch) 18 Guage Soft Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

od325077/2021_2022 : Supply, Installation ,testing and commissioning of 9.525 mm( 3/8 inch) 18 Guage Hard Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

od332335/2021_2022 : Supply, Installation ,testing and commissioning of 6.35mm( 1 /4 inch) 18 Guage Soft Copper Piping with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc. insulated with 19mm thick round closed cell elastomeric insulation finished having with factory laminated 7mils woven fibre glass cloth having antimicrobial properties , including making necessary chasing,drilling,concealing and making good the same on walls etc as per site conditions complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated.

DX SYSTEM

od325168/2021_2022 : Supply, Installation ,testing and commissioning of Double skin, sheet metal DX AIR-HANDLING UNIT as per technical specifications complete with outlet volume control dampers, canvas connections, Aluminum frame having filtration capacity of 10 micron particle size with an efficiency of 90% complying to ASHRAE 52.2 , cooling coil of copper tube and aluminium fin construction, drier, first charge refrigerant gas of R410A/407C,complete with power wiring, suitable capacity drive motor conforming to IE3 as per IS 12615, TEFC, 3-Ph induction motor, DIDW centrifugal fan, drive package and cushy-foot mounting, all housed inside housing of a double skin construction AHU with vibration isolation arrangement, thermostat, control wiring, complete with necessary vibration isolators, all housed inside housing of a double skin construction AHU with vibration isolation arrangement, all associated electrical works like power wiring and thermostat wiring, required starter panel &VFD starter , structural supports for fixing IDU, safety devices etc.CPVC drain Pipe of suitable dia as required to meet the condensate drain flow(upto 5 m) with 9mm thick round nitrile rubber insulation finished with 7 mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating, including U-trap along with necessary elbows, fittings etc ,shall meet adequate external static pressure for the following minimum capacity and the cooling coil (min 4 rows), suitable for three phase 440V supply, etc complete in all respects as per technical specifications . 40TR/16000 CFM (Minimum External Static Pressure 50 mm wc )

od325169/2021_2022 : Supply, Installation ,testing and commissioning of Air-cooled Outdoor DX-unit with single/multiple compressors as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, high-low pressure cut off, with ODU vibration isolators, squirrel cage, TEFC, 3-Ph induction motor, drive package and cushy-foot mounting, all housed inside a cabin, power wiring and thermostat wiring, structural supports for fixing ODU, safety devices etc. for the following minimum capacity suitable for three phase 440V supply, etc complete in all respects as per technical specifications. 40TR/16000 CFM

od325170/2021_2022 : Supply, Installation ,testing and commissioning of Double skin, sheet metal DX AIR-HANDLING UNIT as per technical specifications complete with outlet volume control dampers, canvas connections, Aluminum frame having filtration capacity of 10 micron particle size with an efficiency of 90% complying to ASHRAE 52.2 , cooling coil of copper tube and aluminium fin construction, drier, first charge refrigerant gas of R410A/407C,complete with power wiring, suitable capacity drive motor conforming to IE3 as per IS 12615, TEFC, 3-Ph induction motor, DIDW centrifugal fan, drive package and cushy-foot mounting, all housed inside housing of a double skin construction AHU with vibration isolation arrangement, thermostat, control wiring, complete with necessary vibration isolators, all housed inside housing of a double skin construction AHU with vibration isolation arrangement, all associated electrical works like power wiring and thermostat wiring, required starter panel and VFD starter , structural supports for fixing IDU, safety devices etc.CPVC drain Pipe of suitable dia as required to meet the condensate drain flow(upto 5 m) with 9mm thick round nitrile rubber insulation finished with 7 mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating, including U-trap along with necessary elbows, fittings etc ,shall meet adequate external static pressure for the following minimum capacity and the cooling coil (min 4 rows), suitable for three phase 440V supply, etc complete in all respects as per technical specifications . 30TR/12000 CFM (Minimum External Static Pressure 50 mmwc )

od325171/2021_2022 : Supply, Installation ,testing and commissioning of Air-cooled Outdoor DX-unit with single/multiple compressors as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, high-low pressure cut out, with ODU vibration isolators, squirrel cage, TEFC, 3-Ph induction motor, drive package and cushy-foot mounting, all housed inside a cabin, power wiring and thermostat wiring, structural supports for fixing ODU, safety devices etc. complete in all respects as required by the technical specifications for the following minimum capacity suitable for three phase 440V supply etc complete as required by the standard specifications. 30TR/12000 CFM

od325172/2021_2022 : Supply, Installation ,testing and commissioning of Double skin, sheet metal DX AIR-HANDLING UNIT as per technical specifications complete with outlet volume control dampers, canvas connections, Aluminum frame having filtration capacity of 10 micron particle size with an efficiency of 90% complying to ASHRAE 52.2 , cooling coil of copper tube and aluminium fin construction, drier, first charge refrigerant gas of R410A/407C,complete with power wiring, suitable capacity drive motor conforming to IE3 as per IS 12615, TEFC, 3-Ph induction motor, DIDW centrifugal fan, drive package and cushy-foot mounting, all housed inside housing of a double skin construction AHU with vibration isolation arrangement, thermostat, control wiring, complete with necessary vibration isolators, all housed inside housing of a double skin construction AHU with vibration isolation arrangement, all associated electrical works like power wiring and thermostat wiring, required starter panel & VFD starter , structural supports for fixing IDU, safety devices etc.CPVC drain Pipe of suitable dia as required to meet the condensate drain flow(upto 5 m) with 9mm thick round nitrile rubber insulation finished with 7 mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating, including U-trap along with necessary elbows, fittings etc ,shall meet adequate external static pressure for the following minimum capacity and the cooling coil (min 4 rows), suitable for three phase 440V supply, etc complete in all respects as per technical specifications . 20TR/8000 CFM (Minimum External Static Pressure 50 mmwc )

od325173/2021_2022 : Supply, Installation ,testing and commissioning of Air-cooled Outdoor DX-unit with single/multiple compressors as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, high-low pressure cut out, with ODU vibration isolators, squirrel cage, TEFC, 3-Ph induction motor, drive package and cushy-foot mounting, all housed inside a cabin, power wiring and thermostat wiring, structural supports for fixing ODU, safety devices etc. complete in all respects as required by the technical specifications for the following minimum capacity suitable for three phase 440V supply, etc complete in all respects as per technical specifications. 20TR/8000 CFM

od325174/2021_2022 : Supply of suitable sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation with factory laminated 7mils glass cloth as per specification for 40 TR machine between indoor & each outdoor units (refrigerant pipe b/w indoor and multiple outdoor shall be considered as single circuit) required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, suitably supported on trays, clamps etc. including chasing,drilling,concealing and making good the same on walls etc as per site conditions etc. complete in all respects as per technical specifications.

od325175/2021_2022 : Supply, installation ,testing and commissioning of suitable sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation with factory laminated 7mils glass cloth as per specification for 30 TR machine between indoor & each outdoor units (refrigerant pipe b/w indoor and multiple outdoor shall be considered as single circuit) required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, suitably supported on trays, clamps etc. including chasing,drilling,concealing and making good the same on walls etc as per site conditions etc. complete in all respect as per technical specifications.

od325176/2021_2022 : Supply, installation ,testing and commissioning of suitable sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation with factory laminated 7mils glass cloth as per specification for 20 TR machine between indoor & each outdoor units (refrigerant pipe b/w indoor and multiple outdoor shall be considered as single circuit) required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, suitably supported on trays, clamps etc. including chasing,drilling,concealing and making good the same on walls etc as per site conditions etc. complete in all respect as per technical specifications.

od325177/2021_2022 : Supply, installation, testing and commissioning (SITC) of 12 TR or higher capacity air-cooled Ductable split air conditioner (IDU & ODU) with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, digital thermostat, first charge refrigerant gas, suitable sized copper refrigerant piping(both suction and liquid piping) as per relevant ASHRAE standards upto 5 mtr including 19mm thick closed cell Class O elastomeric insulation finished with 7mils factory laminated glass cloth suitably supported on trays/ split clamps etc. ,CPVC drain Pipe upto 5m of suitable dia as required to meet the condensate drain flow (6kg/sq.cm) connecting the drain pan of the indoor units to nearest drain point with U-trap, insulated with 9 mm thick closed cell elastomeric insulation as per specification required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, with factory laminated glass cloth suitably supported on trays, clamps, vibration isolator pads, structural supports for fixing IDU/ ODU as per drawings/standards, safety devices including thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut off etc., power wiring(max 3m from isolator) and control cabling(indoor to outdoor),thermostat wiring etc. suitable for three phase 440V etc. complete in all respects as per technical specifications.

od325178/2021_2022 : Supply, installation, testing and commissioning (SITC) of 11 TR (minimum)capacity air-cooled Ductable split air conditioner (IDU & ODU) with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, with digital thermostat,vibration isolator pads, structural supports for fixing IDU/ ODU as per drawings/standards, safety devices including thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut off etc.,Starter with starter panels as required. power wiring(max 3m from isolator) , control cabling(indoor to outdoor),thermostat wiring , suitable for three phase 440V , first charge refrigerant gas, suitable sized copper refrigerant piping(both suction and liquid piping) as per relevant ASHRAE standards upto 5 mtr including 19mm thick closed cell Class O elastomeric insulation finished with 7mils factory laminated glass cloth suitably supported on trays/ split clamps etc. , CPVC(6kg/sq.cm) condensate drain pipe with required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps upto 5m of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap duly insulated with 9 mm thick closed cell elastomeric insulation , with factory laminated glass cloth suitably supported on trays, clamps etc. complete in all respects as per technical specifications.

od325179/2021_2022 : Supply, installation, testing and commissioning (SITC) of 7TR (minimum)capacity air-cooled Ductable split air conditioner (IDU & ODU) with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, with digital thermostat,vibration isolator pads, structural supports for fixing IDU/ ODU as per drawings/standards, safety devices including thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut off etc.,Starter with starter panels as required. power wiring(max 3m from isolator) , control cabling(indoor to outdoor),thermostat wiring , suitable for three phase 440V , first charge refrigerant gas, suitable sized copper refrigerant piping(both suction and liquid piping) as per relevant ASHRAE standards upto 5 mtr including 19mm thick closed cell Class O elastomeric insulation finished with 7mils factory laminated glass cloth suitably supported on trays/ split clamps etc. , CPVC(6kg/sq.cm) condensate drain pipe with required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps upto 5m of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap duly insulated with 9 mm thick closed cell elastomeric insulation , with factory laminated glass cloth suitably supported on trays, clamps etc. complete in all respects as per technical specifications.

od325180/2021_2022 : Supply, installation, testing and commissioning (SITC) of 5.5 TR (minimum)capacity air-cooled Ductable split air conditioner (IDU & ODU) with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, with digital thermostat,vibration isolator pads, structural supports for fixing IDU/ ODU as per drawings/standards, safety devices including thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut off etc.,Starter with starter panels as required. power wiring(max 3m from isolator) , control cabling(indoor to outdoor),thermostat wiring , suitable for three phase 440V , first charge refrigerant gas, suitable sized copper refrigerant piping(both suction and liquid piping) as per relevant ASHRAE standards upto 5 mtr including 19mm thick closed cell Class O elastomeric insulation finished with 7mils factory laminated glass cloth suitably supported on trays/ split clamps etc. , CPVC(6kg/sq.cm) condensate drain pipe with required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps upto 5m of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap duly insulated with 9 mm thick closed cell elastomeric insulation , with factory laminated glass cloth suitably supported on trays, clamps etc. complete in all respects as per technical specifications.

od325181/2021_2022 : Supply, installation, testing and commissioning (SITC) of 4TR (minimum)capacity air-cooled Ductable split air conditioner (IDU & ODU) with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, with digital thermostat,vibration isolator pads, structural supports for fixing IDU/ ODU as per drawings/standards, safety devices including thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut off etc.,Starter with starter panels as required. power wiring(max 3m from isolator) , control cabling(indoor to outdoor),thermostat wiring , suitable for three phase 440V , first charge refrigerant gas, suitable sized copper refrigerant piping(both suction and liquid piping) as per relevant ASHRAE standards upto 5 mtr including 19mm thick closed cell Class O elastomeric insulation finished with 7mils factory laminated glass cloth suitably supported on trays/ split clamps etc. , CPVC(6kg/sq.cm) condensate drain pipe with required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps upto 5m of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap duly insulated with 9 mm thick closed cell elastomeric insulation , with factory laminated glass cloth suitably supported on trays, clamps etc. complete in all respects as per technical specifications.

od325182/2021_2022 : Supply, installation, testing and commissioning (SITC) of 3.5TR (minimum)capacity air-cooled Ductable split air conditioner (IDU & ODU) with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, with digital thermostat,vibration isolator pads, structural supports for fixing IDU/ ODU as per drawings/standards, safety devices including thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut off etc.,Starter with starter panels as required. power wiring(max 3m from isolator) , control cabling(indoor to outdoor),thermostat wiring , suitable for three phase 440V , first charge refrigerant gas, suitable sized copper refrigerant piping(both suction and liquid piping) as per relevant ASHRAE standards upto 5 mtr including 19mm thick closed cell Class O elastomeric insulation finished with 7mils factory laminated glass cloth suitably supported on trays/ split clamps etc. , CPVC(6kg/sq.cm) condensate drain pipe with required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps upto 5m of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap duly insulated with 9 mm thick closed cell elastomeric insulation , with factory laminated glass cloth suitably supported on trays, clamps etc. complete in all respects as per technical specifications.

od325183/2021_2022 : Supply, installation, testing and commissioning (SITC) of 3TR (minimum)capacity air-cooled Ductable split air conditioner (IDU & ODU) with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, with digital thermostat,vibration isolator pads, structural supports for fixing IDU/ ODU as per drawings/standards, safety devices including thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut off etc.,Starter with starter panels as required. power wiring(max 3m from isolator) , control cabling(indoor to outdoor),thermostat wiring , suitable for three phase 440V , first charge refrigerant gas, suitable sized copper refrigerant piping(both suction and liquid piping) as per relevant ASHRAE standards upto 5 mtr including 19mm thick closed cell Class O elastomeric insulation finished with 7mils factory laminated glass cloth suitably supported on trays/ split clamps etc. , CPVC(6kg/sq.cm) condensate drain pipe with required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps upto 5m of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap duly insulated with 9 mm thick closed cell elastomeric insulation , with factory laminated glass cloth suitably supported on trays, clamps etc. complete in all respects as per technical specifications.

od325184/2021_2022 : Supply, installation, testing and commissioning (SITC) of 2.5TR (minimum)capacity air-cooled Ductable split air conditioner (IDU & ODU) with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, with digital thermostat,vibration isolator pads, structural supports for fixing IDU/ ODU as per drawings/standards, safety devices including thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut off etc.,Starter with starter panels as required. power wiring(max 3m from isolator) , control cabling(indoor to outdoor),thermostat wiring , suitable for three phase 440V , first charge refrigerant gas, suitable sized copper refrigerant piping(both suction and liquid piping) as per relevant ASHRAE standards upto 5 mtr including 19mm thick closed cell Class O elastomeric insulation finished with 7mils factory laminated glass cloth suitably supported on trays/ split clamps etc. , CPVC(6kg/sq.cm) condensate drain pipe with required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps upto 5m of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap duly insulated with 9 mm thick closed cell elastomeric insulation , with factory laminated glass cloth suitably supported on trays, clamps etc. complete in all respects as per technical specifications.

od325185/2021_2022 : Supply, installation, testing and commissioning (SITC) of 2.0TR (minimum)capacity air-cooled Ductable split air conditioner (IDU & ODU) with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, with digital thermostat,vibration isolator pads, structural supports for fixing IDU/ ODU as per drawings/standards, safety devices including thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut off etc.,Starter with starter panels as required. power wiring(max 3m from isolator) , control cabling(indoor to outdoor),thermostat wiring , suitable for three phase 440V , first charge refrigerant gas, suitable sized copper refrigerant piping(both suction and liquid piping) as per relevant ASHRAE standards upto 5 mtr including 19mm thick closed cell Class O elastomeric insulation finished with 7mils factory laminated glass cloth suitably supported on trays/ split clamps etc. , CPVC(6kg/sq.cm) condensate drain pipe with required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps upto 5m of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap duly insulated with 9 mm thick closed cell elastomeric insulation , with factory laminated glass cloth suitably supported on trays, clamps etc. complete in all respects as per technical specifications.

od325186/2021_2022 : Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 5 mtr including 19mm thick closed cell elastomeric insulation with factory laminated 7mils glass cloth as per specification for 12 TR machine between indoor & outdoor units as per site conditions complete in all respect as per technical specifications.

od325187/2021_2022 : Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 5 mtr including 19mm thick closed cell elastomeric insulation with factory laminated 7mils glass cloth as per specification for 11 TR machine between indoor & outdoor units as per site conditions complete in all respect as per technical specifications.

od325188/2021_2022 : Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 5 mtr including 19mm thick closed cell elastomeric insulation with factory laminated 7mils glass cloth as per specification for 7 TR machine between indoor & outdoor units as per site conditions , complete in all respect as per technical specifications.

od325189/2021_2022 : Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 5 mtr including 19mm thick closed cell elastomeric insulation with factory laminated 7mils glass cloth as per specification for 5.5 TR machine between indoor & outdoor units as per site conditions etc. complete in all respect as per technical specifications.

od325190/2021_2022 : Supply, installation, testing and commissioning of CPVC drain pipe beyond 5 m of suitable dia connecting the drain pan of the indoor units with necessary U-traps, elbows, fittings etc. to nearest drain point, with 9 mm thick closed cell elastomeric insulation finished with factory laminated 7mils glass cloth etc. complete in all respects as per the technical specifications.

AIR DISTRIBUTION SYSTEM

16.12.1.4:Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006 1.25 mm sheet duct –18 G

16.12.1.3:Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006 1.00 mm sheet duct – 20 G

16.12.1.2: Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006 0.80 mm sheet duct – 22 G

16.12.1.1 Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006 0.63 mm sheet duct 24 G

od325275/2021_2022 : Supplying and fixing of 19mm(minimum) thick class O closed cell nitrile rubber insulation complying to ECBC requirement for R values having a density of 40-60 Kg/m3 and finished with factory laminated 7mils woven fibre glass cloth covering, Including the adhesive tapes, butt joints etc. complete in all respects as per technical specifications.

od325276/2021_2022 : Supply & fixing of Acoustic Insulation of AHU Rooms using open cell processed nitrile rubber having a density of 140-180 Kg/m3 and thickness of 25 mm with anti-microbial protection with suitable frame works etc. complete in all respects as per technical specifications.

od325277/2021_2022 : Supply and fixing of Acoustic lining inside sheet metal ducts with 10mm thick Open Cell nitrile rubber , having density 140-180 kg/m3 insulation using manufacturers recommended adhesive, tapes etc. complete in all respects as per technical specifications.

16.15 : Supplying and Fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

od325291/2021_2022 : DSR 16.16- Supplying & fixing of powder coated extruded aluminium Return Air Grilles with louvers but without volume control dampers complete as required by the technical specifications.

16.17 : Supplying, fixing testing commissioning of supply air diffusers of powder coated Aluminum with Aluminum volume control dampers with anti smudge ring and removable core.

16.18 : Supplying, fixing testing commissioning of Return air diffusers of powder coated Aluminum without volume control dampers with anti smudge ring and removable core.

od325293/2021_2022 : Supply, Installation , testing and commissioning of Aluminium Extruded Fresh air louvers with fresh air damper, bird screen etc. complete in all respects as per the technical specifications.

od325294/2021_2022 : Supply, Installation, testing and commissioning of Aluminium Exhaust Air louvers , dampers, fixing supports etc complete in all respects as per the technical specifications..

16.13 : Supply, Insulation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. GI volume control duct damper

od325295/2021_2022 : Supply, Installation ,testing & commissioning of Fusible link type Fire damper of 16 gauge GI sheets with fire rating of 300 Deg C for 2 hr for air distribution Networks , etc complete in all respects as per the technical specifications.

VENTILATION FANS

od325307/2021_2022 : Supply, Installation, testing and commissioning of Inline cabinet fans (duct mounted) of the following capacity with suitable blower, Single /3 phase motor of following capacity for exhaust, with starter/starter panel, structural supports ,vibration isolator if required other accessories etc. . complete in all respects as per technical specifications.. 200 CFM- ESP 15 mm of WC

od325309/2021_2022 : Supply, Installation, testing and commissioning of Inline cabinet fans (duct mounted) of the following capacity with suitable blower, Single /3 phase motor of following capacity for exhaust, with starter/starter panel, structural supports ,vibration isolator if required other accessories etc. . complete in all respects as per technical specifications. 750 CFM

od325310/2021_2022 : Supply, Installation, testing and commissioning of Inline cabinet fans (duct mounted) of the following capacity with suitable blower, Single /3 phase motor of following capacity for exhaust, with starter/starter panel, structural supports ,vibration isolator if required other accessories etc. . complete in all respects as per technical specifications. 1100 CFM- ESP 15 mm of WC

od325312/2021_2022 : Supply, installation, testing and commissioning of air curtains for sliding doors of width 2.0 m. The system shall include all accessories including motors, blowers, door opening sensors etc with necessary stainless steel structural support for installation complete in all respects as per technical specifications. Material : Aluminium Throw :2.4 m Height

od312416/2021_2022 : Supply, Installation, Testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following, complete in all respect as required as per technical specification. (a) Horizontal, split casing, centrifugal type pump of cast iron body bronze impeller with stainless steel shaft, mechanical seal having rated flow of 2280 lpm at 75m approximate head, conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC, suitable synchronous speed, suitable for operation on 415 volts, 3phase 50Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class- F insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard etc. as required.(d) Suitable cement concrete foundation duly plastered along with anti vibration pads/mounts.

od312418/2021_2022 : Supply, Installation, Testing and Commissioning of diesel engine driven fire pump suitable for automatic operation and consisting of following, complete in all respect as required as per technical specification.(a) Horizontal, split casing, centrifugal type pump of cast iron body bronze impeller with stainless steel shaft, mechanical seal having rated flow 2280 lpm at 75m head, conforming to IS 1520.(b) Suitable HP, suitable RPM water cooled radiator type diesel engine conforming to relevant BS IS standard complete with auto starting mechanism, 12 volts/24 Volts electric starting equipment,12v 180AH Battery and leads, Diesel Tank Fabricated from MS sheet of 4mm Thick (Minimum Capacity for 8 hour operation) with level indicator, By-pass line, piping from diesel tank to engine, exhaust pipe extended upto 1m outside pump house duly insulated with 50 mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.(c) M.S. fabricated Common base plate, coupling, coupling guard etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration pads/ mounts. (e) Diesel engine control panel

od312425/2021_2022 : Supply, Installation, Testing and Commissioning of electric driven pressurisation pump (Jockey Pump) suitable for automatic operation and consisting of following, complete in all respect as required as per technical specification. (a) Vertical centrifugal pump of stainless steel body and stainless steel impeller with stainless steel shaft, mechanical seal having rated flow of 180 lpm at 70m head, conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC, suitable synchronous speed, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class- F insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation

od311988/2021_2022 : Supply, installation, testing and commissioning of electric driven pump set (terrace pump) suitable for automatic operation and consisting of following: complete in all respect as required and as per the technical specification. Monoblock Pump rated for 900lpm, 40 m head C.I body, bronze impeller, SS shaft with mechanical seal, volute type with suitable HP SQ cage induction motor, suitable for operation on 415V, 3phase 50Hz, AC with IP 55 class of protection for enclosure, horizontal foot mounted type with class F insulation. M.S. fabricated common base plate, foundation bolts, anti vibration pads etc. including all necessary accessories and cabling required for successful automatic operation of pump as per technical specifications.

od311926/2021_2022 : Supply, installation, testing and commissioning of pressure gauge 0-200 PSI (0 - 14 Kg/sq.cm ) range, 3/8 BSP bottom entry, 100 mm dial weather proof with stainless steel internals including fittings, ball valves etc. complete as required as per technical specification.

od311927/2021_2022 : Supply, installation, testing and commissioning of industrial type pressure switch having 1/4 BSP(F) connection with IP rated enclosure, phosphor bronze bellows as sensing element, SPDT contact system with fittings, ball valve of suitable of suitable size etc. complete as required as per technical specification.

od312434/2021_2022 : Supply, installation, testing and commissioning of air vessel made of 250 mm dia 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories and painting with synthetic enamel paint of approved shade as required as per technical specification.

od312441/2021_2022 : Supply, Installation, Testing and Commissioning of 200 mm nominal dia MS (Heavy C Class) pipe IS:3589 marked including welding, painting, pipe supports, all fittings and accessories such as elbows, flanges, tees, reducers, neoprene gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of primer two coats of synthetic enamel paint of suitable shade. The pipe shall be fixed on ceiling, walls, columns, truss etc for all heights with suitable hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required as per the technical specification.

od312443/2021_2022 : Supply, Installation, Testing and Commissioning of 150 mm nominal dia MS (Heavy C Class) pipe IS:1239 marked including welding, painting, pipe supports, all fittings and accessories such as elbows, flanges, tees, reducers, neoprene gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of primer two coats of synthetic enamel paint of suitable shade. The pipe shall be fixed on ceiling, walls, columns, truss etc for all heights with suitable hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required as per the technical specification.

od312444/2021_2022 : Supply, Installation, Testing and Commissioning of 100 mm nominal dia MS (Heavy C Class) pipe IS:1239 marked including welding, painting, pipe supports, all fittings and accessories such as elbows, flanges, tees, reducers, neoprene gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of primer two coats of synthetic enamel paint of suitable shade. The pipe shall be fixed on ceiling, walls, columns, truss etc for all heights with suitable hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required as per the technical specification.

od312446/2021_2022 : Supply, Installation, Testing and Commissioning of 80 mm nominal dia MS (Heavy C Class) pipe IS:1239 marked including welding, painting, pipe supports, all fittings and accessories such as elbows, flanges, tees, reducers, neoprene gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of primer two coats of synthetic enamel paint of suitable shade. The pipe shall be fixed on ceiling, walls, columns, truss etc for all heights with suitable hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required as per the technical specification.

od312447/2021_2022 : Supply, Installation, Testing and Commissioning of 65 mm nominal dia MS (Heavy C Class) pipe IS:1239 marked including welding, painting, pipe supports, all fittings and accessories such as elbows, flanges, tees, reducers, neoprene gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of primer two coats of synthetic enamel paint of suitable shade. The pipe shall be fixed on ceiling, walls, columns, truss etc for all heights with suitable hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required as per the technical specification.

od312448/2021_2022 : Supply, Installation, Testing and Commissioning of 50 mm nominal dia MS (Heavy C Class) pipe IS:1239 marked including welding, painting, pipe supports, all fittings and accessories such as elbows, flanges, tees, reducers, neoprene gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of primer two coats of synthetic enamel paint of suitable shade. The pipe shall be fixed on ceiling, walls, columns, truss etc for all heights with suitable hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required as per the technical specification.

od312449/2021_2022 : Supply, Installation, Testing and Commissioning of 40 mm nominal dia MS (Heavy C Class) pipe IS:1239 marked including welding, painting, pipe supports, all fittings and accessories such as elbows, flanges, tees, reducers, neoprene gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of primer two coats of synthetic enamel paint of suitable shade. The pipe shall be fixed on ceiling, walls, columns, truss etc for all heights with suitable hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required as per the technical specification.

od312450/2021_2022 : Supply, Installation, Testing and Commissioning of 32 mm nominal dia MS (Heavy C Class) pipe IS:1239 marked including welding, painting, pipe supports, all fittings and accessories such as elbows, flanges, tees, reducers, neoprene gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of primer two coats of synthetic enamel paint of suitable shade. The pipe shall be fixed on ceiling, walls, columns, truss etc for all heights with suitable hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required as per the technical specification.

od312451/2021_2022 : Supply, Installation, Testing and Commissioning of 25 mm nominal dia MS (Heavy C Class) pipe IS:1239 marked including welding, painting, pipe supports, all fittings and accessories such as elbows, flanges, tees, reducers, neoprene gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of primer two coats of synthetic enamel paint of suitable shade. The pipe shall be fixed on ceiling, walls, columns, truss etc for all heights with suitable hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required as per the technical specification.

od312452/2021_2022 : Supply, laying, testing and commissioning of C class heavy duty MS pipe of 150mm diameter conforming to IS 1239 including welding, providing fittings like elbows, tees, tapers, flanges, nuts/bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation providing cement concrete blocks as supports at 3m intervals, one coat of suitable primer and anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. complete as required as per the technical specification.

od311949/2021_2022 : Supply, laying, testing and commissioning of C class heavy duty MS pipe of 100mm diameter conforming to IS 1239 including welding, providing fittings like elbows, tees, tapers, flanges, nuts/bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation providing cement concrete blocks as supports at 3m intervals, one coat of suitable primer and anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. complete as required as per the technical specification.

od312453/2021_2022 : Supply, laying, testing and commissioning of C class heavy duty MS pipe of 80 mm diameter conforming to IS 1239 including welding, providing fittings like elbows, tees, tapers, flanges, nuts/bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation providing cement concrete blocks as supports at 3m intervals, one coat of suitable primer and anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. complete as required as per the technical specification.

od312455/2021_2022 : Supply, installation, testing and commissioning of dual plate non-return valve of 150 mm diameter, PN16 conforming to API 594 with Cast iron/Cast steel body, SS disc complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as per the technical specification.

od312456/2021_2022 : Supply, installation, testing and commissioning of dual plate non-return valve of 100 mm diameter, PN16 conforming to API 594 with Cast iron/Cast steel body, SS disc complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as per the technical specification.

od312457/2021_2022 : Supply, installation, testing and commissioning of dual plate non-return valve of 65 mm diameter, PN16 conforming to API 594 with Cast iron/Cast steel body, SS disc complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as per the technical specification.

od312458/2021_2022 : Supply, installation, testing and commissioning of butterfly valve of 200 mm diameter, PN 16, with Cast iron/Carbon steel body, SS disc complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as required as per the technical specification and conforming to IS 13095.

od312459/2021_2022 : Supply, installation, testing and commissioning of butterfly valve of 150 mm diameter, PN 16, with Cast iron/Carbon steel body, SS disc complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as required as per the technical specification and conforming to IS 13095.

od312460/2021_2022 : Supply, installation, testing and commissioning of butterfly valve of 100 mm diameter, PN 16, with Cast iron/Carbon steel body, SS disc complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as required as per the technical specification and conforming to IS 13095.

od312461/2021_2022 : Supply, installation, testing and commissioning of butterfly valve of 80 mm diameter, PN 16, with Cast iron/Carbon steel body, SS disc complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as required as per the technical specification and conforming to IS 13095.

od312463/2021_2022 : Supply, installation, testing and commissioning of butterfly valve of 65 mm diameter, PN 16, with Cast iron/Carbon steel body, SS disc complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as required as per the technical specification and conforming to IS 13095.

od312464/2021_2022 : Supply, installation, testing and commissioning of butterfly valve of 40 mm diameter, PN 16, with Cast iron/Carbon steel body, SS disc complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as required as per the technical specification and conforming to IS 13095.

od312465/2021_2022 : Supply, installation, testing and commissioning of 150 mm dia Y strainer with Cast iron/Carbon steel body, SS mesh complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as required as per the technical specification.

od312462/2021_2022 : Supply, installation, testing and commissioning of 80 mm dia Y strainer with Cast iron/Carbon steel body, SS mesh complete with all accessories including flanges, rubber gasket, GI bolts, GI nuts, washers etc. complete as required as per the technical specification.

od311963/2021_2022 : Supply, installation, testing and commissioning single headed internal hydrant valve with instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank cap and chain, complete as required as per technical specification

od311964/2021_2022 : Supply, installation, testing and commissioning of First-aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with up to date amendments, complete with the following as required as per technical specification. (a) 30 m. long 20 mm (nominal internal dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585 (b) 20 mm (nominal internal) dia gun metal globe valve nozzle (c) Drum and brackets for fixing the equipment on wall (d) Connections from riser with 25 mm dia stop valve with pipe and socket

od311965/2021_2022 : Supply, installation, testing and commissioning of 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with GI/MS/SS wire, rivets etc. conforming to IS 636 (type-1) as required as per technical specification.

od311966/2021_2022 : Supply, installation, testing and commissioning of 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling as required as per technical specification

od311967/2021_2022 : Supply, installation, testing and commissioning of hose boxes wall/pedestal type of size 750 x 250 x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required as per technical specification.

od311968/2021_2022 : Supply, installation, testing and commissioning of 2-WAY FIRE BRIGADE inlet connection made of CI Body, 100mm dia. flanged inlet with 2 Nos. of inbuilt gunmetal, NRV (Body type) with PVC Blank cap Chain complete with GI nuts, bolts, gasket etc as required as per technical specification.

od312471/2021_2022 : Supply, installation, testing and commissioning of 4-WAY FIRE BRIGADE inlet connection made of CI Body, 150mm dia. flanged inlet with 4 Nos. of inbuilt gunmetal, NRV (Body type) with PVC Blank cap Chain complete with GI nuts, bolts, gasket etc as required as per technical specification.

od312472/2021_2022 : Providing, fixing, testing commissioning of UL listed, Standard response, standard coverage pendant type sprinkler ;1/2 NPT, K -5.6, Chrome Finish; operating temperature at 68 deg. C. with rosette plate and other accessories complete as required as per the technical specification.

od311970/2021_2022 : Providing, fixing, testing commissioning of UL listed, Standard response, standard coverage upright type sprinkler ;1/2 NPT, K -5.6, Chrome Finish; operating temperature at 68 deg. C. with all accessories complete as required as per the technical specification.

od312475/2021_2022 : Supply, installation, testing and commissioning of 1m unbraided flexible connection to position the sprinkler head in desired location in suspended ceilings. The unit must be complete with stainless steel flexible connection with nipple, reducer, square bar and brackets etc and other accessories as required as per the technical specification.

od312476/2021_2022 : Supply, Installation, Testing and Commissioning of 150mm dia Sprinkler alarm valve of Ductile iron/ Cast iron body and bronze working parts comprising of water motor alarm to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, drain valve and bypass, flanges, GI nuts, bolts, gasket etc. complete with all necessary accessories as required for proper functioning as per the technical specification.

od311974/2021_2022 : Supply, installation, testing and commissioning of UL listed flow switch with SPDT contacts, with fixing accessories suitable for nominal pipe dia meters ranging from 1 to 6 . The body of the flow switch shall be water proof with IP protection. There shall be inbuilt settings to adjust the flow rate and alarm retard time. The flow switch should have minimum withstand pressure of 10Kg/cm2 and operating pressure ranging from 3.5kg/cm2 to 10Kg/cm2. complete as required as per the technical specifications.

od311975/2021_2022 : Supply, installation, testing and commissioning of Gun metal Air release valve, 25mm male threaded inlet, complete with all accessories as required as per the technical specification.

od311912/2021_2022 : Supply and installation of ABC Stored pressure type Fire Extinguisher 6 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher should be manufactured strictly as per IS: 15683:2018 with ISI mark as required as per the technical specification.

od311917/2021_2022 : Supply and installation of Carbon-dioxide extinguisher of ISI marked 4.5 Kg capacity made of high pressure seamless steel cylinder (CCE marked ) complete with wheel type valve with one meter long braided high pressure discharge hose complete in all respects including initial fill with CO2 gas, conforming to IS:15683:2018 complete as required as per the technical specification.

od311920/2021_2022 : Supply, installation, testing and commissioning of Modular (Cealing mounted) ABC type extinguisher of 5Kg complete as required with all necessary accessories for successful operation as required as per the technical specification.

od311924/2021_2022 : Supply and installation of ISI marked Clean agent type fire extinguisher of 2kg capacity. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket, all the accessories and as per the technical specifications.

od312414/2021_2022 : Supply, installation, testing and commissioning of Addressable type Multi Detector (smoke & heat sensor) complete with all accessories like base, base box, etc. to be installed under/above false ceiling, roof and concealed space, interconnecting to loop cable, complete as required as per technical specification. The product shall be EN/UL/FM/LPCB approved/ listed.

od311918/2021_2022 : Supply, installation, testing and commissioning of Addressable type Manual pull station complete with all accessories like base box having provision for cable or conduit coupling as required as per technical specification. The product shall be EN/UL/FM/LPCB approved/ listed.

od311919/2021_2022 : Supply, installation, testing and commissioning of addressable type or conventional with addressable module wall sounder cum strobe for both audio and visual indication complete with all fixing accessories, base box etc. under false ceiling, roof, wall, etc, as required as per the technical specification. The product shall be EN/UL/FM/LPCB approved/ listed.

od312426/2021_2022 : Supply, installation, testing and commissioning of fault isolator module to protect one area or a number of devices with complete set to be installed under/above false ceiling, roof, concealed space, wall, etc.interconnecting to loop cable, complete in all respect with necessary accessories as required as per the technical specification. The product shall be EN/UL/FM/LPCB approved/ listed.

od311929/2021_2022 : Supply, installation, testing and commissioning of intelligent addressable Input module for monitoring purpose and send the signal from a flow switch to the alarm panel for initiating alarm when flow occur, complete with all necessary accessories as required as per the technical specification. The product shall be EN/UL/FM/LPCB approved/ listed.

od311932/2021_2022 : Supply, installation, testing and commissioning of 24V Power supply unit for hooters including battery backup, all fixing accessories etc. complete in all respect with necessary accessories as required as per the technical specification.

od311930/2021_2022 : Supply, installation, testing and commissioning of addressable relay module to automatically trigger on/off 3rd party devices like fire damper, jet fans, extract air fans etc in case of fire, complete with all accessories as required as per the technical specification. The product shall be EN/UL/FM/LPCB approved/ listed.

od311937/2021_2022 : Supply, installation, testing and commissioning of EN/UL/FM/LPCB approved/ listed, microprocessor based 1 loop intelligent addressable main fire alarm panel, central processing unit with the loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, LCD display with touch screen or other keypad and events history log in the non-volatile memory (EPROM), power supply unit (230 ± 5% V, 50 Hz), 24 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall be networkable in peer-to-peer basis with other Addressable Fire Alarm Panels. The Panel shall be able to give pin point location of all Fire/Fault conditions of addressable units via the address codes for each unit. The Panel shall also be able to automatically switch off all Control Switches whenever any Alarm is triggered. The panel shall have facility to integrate with analog/digital voice evacuation system (PA-talkback system) and shall be complete with all necessary accessories. The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as required as per the technical specification and shall have following facilities. a) Programming software for the system b) Automatic system test activates c) Detector sensitivity adjustments d) Alarm verification e) Alpha/numerical display f) Provision to connect to PCs and external printers

od312440/2021_2022 : Supply, installation, testing and commissioning of EN/UL/FM/LPCB approved/ listed, microprocessor based intelligent addressable main fire alarm panel with four loops for accommodating all the devices in a single panel, central processing unit with the loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, LCD display with touch screen or other keypad and events history log in the non-volatile memory (EPROM), power supply unit (230 ± 5% V, 50 Hz), 24 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall be networkable in peer-to-peer basis with other Addressable Fire Alarm Panels. The Panel shall be able to give pin point location of all Fire/Fault conditions of addressable units via the address codes for each unit. The Panel shall also be able to automatically switch off all Control Switches whenever any Alarm is triggered. The panel shall have facility to integrate with analog/digital voice evacuation system (PA-talkback system) and shall be complete with all necessary accessories. The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as required as per the technical specification and shall have following facilities. a) Programming software for the system b) Automatic system test activates c) Detector sensitivity adjustments d) Alarm verification e) Alpha/numerical display f) Provision to connect to PCs and external printers

od312442/2021_2022 : Supply and laying of 2x1.5 sq.mm armoured Copper FRLS cable ISI marked with proper clamping, supports and terminations appropriately above /below ground,on wall surface or recess as required as per the technical specifications.

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

od311942/2021_2022 : Supply, installation, testing and commissioning of CO2/Clean agent linear heat detection system using trace tubes for panel flooding of electrical panels(the main distribution MV electrical panel) consisting of gas cylinders with weight calculated on the basis of volume of single largest compartment within the panel. UL listed trace tube of required design length, a cylinder of required capacity, also consisting of master control unit with digital display, load cell, discharge hooter/flashers, pressure gauges, pressure switches for low pressure/discharge indications interlocks with fire alarm system of the premises all accessories;for complete functionality of system, complete as required as per the technical specification.

od311914/2021_2022 : Supply and installation of photo luminescent glow signage such as Fire Duct/Fire Lift/Hose reel/Fire Staircase/No smoking etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws double tape or hanged from the false ceiling with the help of chain screws etc. complete as required as per the technical specification.

od311916/2021_2022 : Supply and installation of photoluminescent glow signage for FIRE ASSEMBLY POINT of standard size (500*200 MM minimum) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws double tape or hanged from the false ceiling with the help of chain screws etc. complete as required as per the technical specification.

od311921/2021_2022 : Supply and installation of photo luminescent glow signage containing standard instructions to the occupants in case of Fire emergency (FIRE ORDER), of standard size (600*800 MM minimum) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws &double tape or hanged from the false ceiling with the help of chain screws etc. complete as required as per the technical specification.

od311925/2021_2022 : Supply and installation of photo luminescent glow signage such as Exit/Fire Exit signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws double tape or hanged from the false ceiling with the help of chain screws etc. complete as required as per the technical specification.

od311928/2021_2022 : Supply and fixing (in appropriate location) of Fire Emergency Evacuation Plan (Color) printed in photo paper of Size A2 sand-witched in Clear acrylic sheets fixed using SS Studs and other accessories complete as required as per the technical specification and conforming to IS 9457, IS 12349, IS 12407 Evacuation Plan shall be prepared by the contractor and got approved from Client/Consultant and shall be complete as per the technical specification.

ELEVATOR SYSTEM

od316817/2021_2022 : .Design, fabrication, supply, installation, testing and commissioning of machine room less electric traction type , Stainless steel 20 Pax (1360 Kg) passenger elevator (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc., except GST ) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, simplex mode operation, operating panel with luminous buttons, over load warning indicator, battery operated alarmbell, LED type emergency light, intercom suitable for hook upto Purchasers' EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, Automatic Rescue Device (ARD) with dry maintenance free sealed batteries, Safe landing device and Battery operated Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door audio announcement along with pre-recorded message as approved by Engineer-in-Charge. The drives of elevator shall meet the requirements of IEEE 519/2014. The PMSM traction motor( IE 3 or better efficiency) of machine room less elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification.Having automatic centre opening SS door stainless steel car enclosure provided with stainless steel hand rails on Three sides, Granite flooring as applicable in accordance of following details:-4 stops & 4 openings and entrance & exit at same side and suitable for travel height of 12.6 mtrs. (Shaft Size 2775mm (width) x 2350mm (depth) ) with suitable car dimensions (complying with the net inside car area as per IS 14665 part 3 section 1) , door opening of 1000mm (width) and 2000 mm (height) . The equipment should be BMS compatible.All electrical components with wiring from the single point power supply at top landing .All components, fabrication and procedures of elevator system shall confirm to relevant IS standards and complete in all respects as per technical specifications .

od316820/2021_2022 : Design, fabrication, supply, installation, testing and commissioning of with machine room electric traction type cargo elevator of 3000 Kg capacity with suitable car size (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc., except gst) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, simplex mode operation, operating panel with luminous buttons, over load warning indicator, battery operated alarmbell, LED type emergency light, intercom suitable for hook upto Purchasers' EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, Automatic Rescue Device (ARD) with dry maintenance free sealed batteries, Safe landing device and Battery operated Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door audio announcement along with pre-recorded message as approved by Engineer-in-Charge. The drives of elevator shall meet the requirements of IEEE 519/2014. The PMSM traction motor( IE 3 or better efficiency) of machine room less elevator shall be of gearless type and placed inside the machine room complete as per technical specification : 3 Tonne (Minimum) capacity elevator, 4 stops & 4 openings and entrance at front side on all the serving floors, automatic centre opening car enclosure provided with handrail on 3 side as applicable,aluminium chequered plate flooring, matt finish stainless steel panel on all four side with travel height of 12.6 mtrs(shaft size:2900mm X 3300 mm) with door opening of 2000mm (width) and 2000 mm (height) . All components, fabrication and procedures of the elevator system shall confirm to relevant IS standards and complete in all respects as per technical specifications .

od316842/2021_2022 : Design, fabrication,supply, installation ,testing and commissioning supply of machine room less electric traction type, stainless steel 16 Pax passenger elevator (1088 Kg), (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc., except GST ) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, simplex mode operation, operating panel with luminous buttons, over load warning indicator, battery operated alarmbell, LED type emergency light, intercom suitable for hook upto Purchasers' EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, Automatic Rescue Device (ARD) with dry maintenance free sealed batteries, Safe landing device and Battery operated Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door audio announcement along with pre-recorded message as approved by Engineer-in-Charge. The drives of elevator shall meet the requirements of IEEE 519/2014. The PMSM traction motor( IE 3 or better efficiency) of machine room less elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having automatic centre opening SS door stainless steel car enclosure provided with stainless steel hand rails on Three sides, Granite flooring as applicable in accordance of following details- 4 stops & 4 openings and entrance & exit at same side and suitable for travel height of 12.6 mtrs. (Shaft Size 2550mm (width) x 2100mm (depth)) with suitable car dimensions (complying with the net inside car area as per IS 14665 part 3 section 1),door opening of 1000 mm and 2000 mm height. The equipment should be BMS compatible. All components, fabrication and procedures of the elevator system shall confirm to relevant IS standards and complete in all respects as per technical specifications.

STRUCTURED CABLING AND ACTIVE DEVICES

od300898/2021_2022 : Supply, Installation, Testing and Commissioning of U/UTP cable - Category 6A , 4 pair, 23 AWG solid copper conductor, 500 MHz, LSZH - with Fluke Cable Analyser through existing conduits including termination, numbering tags, Cable ties, ferrules and all accessories required at site as per technical specification.

od300903/2021_2022 : Supply, Installation, Testing and Commissioning of U/UTP cable - Category 6, 4 pair, 23 AWG solid copper conductor, 250 MHz, LSZH - with Fluke Cable Analyser through existing conduits including termination, numbering tags, Cable ties, ferrules and all accessories required at site as per technical specification.

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

od300910/2021_2022 : Supply, Installation, Testing and commissioning of concealed metal backbox with all accessories required at site to complete the work as per technical specification.

od300915/2021_2022 : Supply, Installation, Testing and Commissioning of CAT6A information Outlet, RJ 45 with all accessories required at site including termination to complete the work as per technical specification

od300917/2021_2022 : Supply, Installation, Testing and Commissioning of CAT6 information Outlet, RJ 45 with all accessories required at site including termination to complete the work as per technical specification

od300918/2021_2022 : Supply, Installation, Testing and Commissioning of CAT6A 48 port patch panel, fully loaded, with all accessories required at site including termination to complete the work as per technical specification.

od300919/2021_2022 : Supply, Installation, Testing and Commissioning of CAT6 48 port patch panel, fully loaded, with all accessories required at site including termination to complete the work as per technical specification.

od300920/2021_2022 : Supply, Installation, Testing and Commissioning of Single or Dual Shuttered Face Plate with all accessories required at site to complete the work as per technical specification.

od325118/2021_2022 : Supply ,Installation, testing and commissioning of Cat 6A Patch cord - 1m along with all accessories required at site as per technical specification

od300921/2021_2022 : Supply, Installation, Testing and Commissioning of Cat6A Patch Cord - 2m with all accessories required at site complete as per technical specification.

od300922/2021_2022 : Supply, Installation, Testing and Commissioning of Cat6 Patch Cord - 1m with all accessories required at site complete as per technical specification.

od300923/2021_2022 : Supply, Installation, Testing and Commissioning of Cat6 Patch Cord - 2m with all accessories required at site complete as per technical specification.

od300924/2021_2022 : Supply, Installation, Testing and Commissioning of casing capping with all accessories required at site complete as per technical specification.

od300925/2021_2022 : Supply, Installation, Testing and Commissioning covered GI unperforated cable tray with 300 mm width X 50 mm depth X 1.6 mm thickness (ISI Grade) with thread road, anchor fastener, nut & washer, etc. including all necessary accessories required at site complete as per technical specification.

od300926/2021_2022 : Supply, Installation, Testing and Commissioning of 48 port Stackable switch - Layer 2, 48 x 10/100/1000Base-TX ports with 2 x SFP+ ports with all necessary hardware & accessories, etc. as required at site to complete the work as per technical specification.

od326947/2021_2022 : Supply, Installation, Testing and Commissioning of 24 port Stackable switch - Layer 2, 24 x 10/100/1000Base-TX ports with 2 x SFP+ ports with all necessary hardware & accessories, etc. as required at site to complete the work as per technical specification.

od300927/2021_2022 : Supply, installation, testing and commissioning of 24 port Core Switch - Layer 3 with minimum 20 x 10G SFP+ and 4 x 10G copper ports and all necessary hardware and accessories as required at site to complete the work as per technical specification

od300928/2021_2022 : Supply, installation, testing and commissioning of next generation Firewall having a capacity of handling 1500 concurrent users with logs, monitoring, bandwidth management, security subscriptions, including software, licenses and all accessories required at site to complete the work as per technical specification

od326590/2021_2022 : Supply, installation, testing and commissioning of next generation Firewall having a capacity of handling 500 concurrent users with logs, monitoring, bandwidth management, security subscriptions, including software, licenses and all accessories required at site to complete the work as per technical specification

od325235/2021_2022 : Supply, installation, testing and commissioning of 24 port LIU fully loaded with LC pigtails / adapters / couplers / splice tray / splice holder and all other accessories required at site to complete the work as per technical specification.

od325236/2021_2022 : Supply, installation, testing and commissioning of 10GBase-LR Transceiver Module - for 10G over single mode fiber with all accessories required at site complete as per technical specification.

od325221/2021_2022 : Supply, installation, testing and commissioning of 1GBase-LR Transceiver Module - for 1G over single mode fiber with all accessories required at site complete as per technical specification.

od325240/2021_2022 : Supply, Installation, Testing and Commissioning of duplex fiber patch cord, SM, LC-LC including all accessories required at site and as per technical specification

od325222/2021_2022 : Supply, Installation, Testing and Commissioning of 6 core single mode OFC indoor / outdoor through existing conduits / trench / pipes including all accessories required at site to complete the work as per technical specification

od325245/2021_2022 : Supply, installation, testing and commissioning of 32mm dia HDPE pipe in surface / ground complete with all accessories including trenching (75 cm deep) and re-filling etc as required at site complete as per technical specification.

14.13.1 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required50 mm dia

od300929/2021_2022 : Supply, installation, testing and commissioning of 42U Network Rack (800mmx800mm) along with all necessary hardware and accessories required at site to complete the work as per technical specification.

od326955/2021_2022 : Supply, installation, testing and commissioning of 15U Network Rack along with all necessary hardware and accessories required at site to complete the work as per technical specification.

IP-PBX

od300897/2021_2022 : Supply, installation, testing and commissioning of IP-EPABX system with licenses for 400 IP extensions (expandable upto 3000 IP extensions), 2 PRIs, 60 channel SIP trunk, desktop based operator console, etc., including all hardware and software as required at site to complete the work as per technical specification

od300907/2021_2022 : Supply, installation, testing and commissioning of Standard IP Phones with all accessories required at site complete as per technical specification.

od326489/2021_2022 : Supply, Installation Testing and Commissioning of Layer 2 48 port PoE+ Stackable switch with 2 SFP ports along with all accessories as required at site as per technical specification.

od326570/2021_2022 : Supply, Installation Testing and Commissioning of Layer 2 24 port PoE+ Stackable switch with 2 SFP ports along with all accessories as required at site as per technical specification.

IP SURVEILLANCE

od300902/2021_2022 : Supply, Installation, Testing and Commissioning of 2MP varifocal IP camera, PoE, IP66 rated with all accessories required at site complete as per technical specification.

od325893/2021_2022 : Supply, Installation, Testing and Commissioning of 2MP PTZ IP camera with all the required accessories as required at site in complete as per technical specification.

od300908/2021_2022 : Supply, installation, testing and commissioning of 128 channel Network Video Recorder, SAS/Enterprise HDDs, RAID5 with 30 days storage, all required hardware including a desktop, cabling and accessories as required at site to complete the work as per technical specification

od326568/2021_2022 : Supply, installation, testing and commissioning of 64 channel Network Video Recorder, SAS/Enterprise HDDs, RAID5 with 30 days storage, all required hardware including a desktop, cabling and accessories as required at site to complete the work as per technical specification

od300913/2021_2022 : Supply, Installation, testing and commissioning of 55" commercial display 24/7 with HDMI, USB ports with all accessories required at site complete as per technical specification.

od300912/2021_2022 : Supply, Installation Testing and Commissioning of 24 port PoE+ Stackable switch - Layer 2 with 24 x 10/100/1000Base-TX PoE+ ports and 2 SFP ports with all accessories required at site complete as per technical specification.

ATTENDANCE AND ACCESS CONTROL SYSTEM

od300901/2021_2022 : Supply, installation, testing and commissioning of Biometric attendance machine / access control machine with software and all accessories required at site complete as per technical specification.

od327100/2021_2022 : Supply, installation, testing and commissioning of Door access control system with Electromagnetic lock, reader, exit push button, emergency door release, door contacts, control cabling and all accessories required at site to complete the work as per technical specification. The required number of controllers shall be provided by the Contractor along with a central access control server, software and 100 nos of smart cards as part of the door access control system.

PUBLIC ADDRESS AND EVACUATION SYSTEM

od300900/2021_2022 : Supply, installation, testing and commissioning of 2 core 1.5 sqmm speaker cable FRLS with all accessories required at site complete as per technical specification.

od326332/2021_2022 : Supply, Installation, testing and commissioning of 6W Ceiling Speaker with all accessories required at site complete as per technical specification.

od326333/2021_2022 : Supply, Installation, testing and commissioning of 6W wall mount Speaker with all accessories required at site complete as per technical specification.

od326575/2021_2022 : Supply, Installation, testing and commissioning of 480W power amplifier with all accessories required at site complete as per technical specification.

od300911/2021_2022 : Supply, Installation, testing and commissioning of 240W power amplifier with all accessories required at site complete as per technical specification.

od300914/2021_2022 : Supply, Installation, testing and commissioning of PA System Controller capable of managing upto 4 individual zones with BGM, announcement and automatic emergency message facility with integration to Fire alarm system with all accessories required at site complete as per technical specification.

od325902/2021_2022 : Supply, installation, testing and commissioning of wall mounted Talk back system for two way communication with talk back units, console, microphone, amplifier, speaker, etc. along with all accessories as required at site as required at site as per technical specification. The Contractor shall provide 1 no of talkback console with microphone for every 20 talkback units.

od325779/2021_2022 : Supply, installation, testing and commissioning of Wireless Access Point, 2x2 MIMO, WiFi6, PoE, with mounting brackets and all necessary accessories as required at site as per technical specifications

od325782/2021_2022 : Supply, Installation, testing and commissioning of 24 port PoE stackable switch with 2 x 1G SFP ports and all accessories required at site complete as per technical specification.