J&K

Active

Works

Machineries/ Mechanical Engg Items

NIT No MICD 30 of 2026-27 Dated 13.10.2026 Rectification of leakages for 1200mm dia MS Rising Main and 400 mm dia MS delivery pipe of Unit no 4 at LIS Tral Stage 3rd

I and FC

Tral Stage 3rd | Pulwama, Jammu And Kashmir

Amount: ₹28,926Closes: 24 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published14 Oct 2026
Closes24 Oct 2026
Bid Opening24 Oct 2026

Tender Value

₹28,926

Closing Date

24 Oct 2026, 11:00 am5d left

Tender Inviting Organisation

Name

Executive Engineer MICD Srinagar

Address

Executive Engineer MICD Gogji Bagh Srinagar

Work Description

Rectification of leakages for 1200mm dia MS Rising Main and 400 mm dia MS delivery pipe of Unit no 4 at LIS Tral Stage 3rd

Tender Information

Tender ID

2026_IFC_328136_2

Reference Number

e- NIT No. MICD 30 OF 2026-27 Dated 13-10-2026

Tender Type

Open Tender

Product Category

Machineries/ Mechanical Engg Items

Form of Contract

Item Rate

Period of Work

3 days

Location

Tral Stage 3rd

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

19 documents required · 19 mandatory

Fee/PreQual/Technical

RequiredBid Security (EMD) Rs. 400/- (.pdf)

RequiredCost of Tender Document Rs. 500/- (.pdf)

RequiredValid GST registration (.pdf)

RequiredValid PAN registration (.pdf)

RequiredGovernment Contractor Registration as per appendix -I (.pdf)

RequiredDebarment/Blacklisting certificate as per appendix II (.pdf)

RequiredSite visit declaration as per appendix- III (.pdf)

RequiredTurn over certificate from CA (.pdf)

RequiredDecision as per appendix-IV. (.pdf)

Requiredterms and conditions as per appendix V (.pdf)

Requiredall annexures to this e-NIT with all its corrigendums/ addendums (if issued) by the tender inviting (.pdf)

RequiredRelevant Experience certificate (.pdf)

RequiredAccepted copy of all Annexures (.pdf)

RequiredBidders Confirmation of Annexure B, C, D and E (.pdf)

RequiredUndertaking in case for design responsibility as per appendix VII (.pdf)

RequiredUndertaking for work completion as per appendix VIII (.pdf)

RequiredUndertaking for the authentication of the documents and information submitted as per the Appendix IX (.pdf)

RequiredUndertaking as per appendix X for GST linked bank account number (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

Executive Engineer MICD Srinagar

Important Dates

Last Activity

14 Oct 2026

Published

14 Oct 2026

Bid Opening

24 Oct 2026

Download Starts

14 Oct 2026

Download Ends

24 Oct 2026

Submission Starts

14 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (12 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Repairing/maintenance/welding of 1200 mm dia. Rising main of LIS Tral Stage 3rd at RD 580 for rectification of leakage of pipe joint. The welding is to be done by arranging of diesel generator at site due to non-availability of electricity at working place. The job involves complete draining out of 1200 mm rising main through washout and utilizing services of semi-skilled /skilled labors having good knowhow of the job. The joint being partially underground needs excavation of earth pit to expose properly for proper welding. The job involves following works to be carried at site.
1.01	Earth work in bulk excavation by manual means of size 6 feet length X 6 feet width X 5 feet depth pit to expose the base of the pipe also to accesses the proper leakage spot and make a working place and also to make it easy for welding of the leakage point.	5.1	Cum	-	-
1.02	Providing of power supply at site by using generator of required capacity for purpose of welding/grinding etc. due to non-availability of power supply at the leakage spot.	1	Job	-	-
1.03	Cutting of the existing old weld bead by way of oxy acetylene gas cutter for more than half circumferential joint	200	cm	-	-
1.04	Preparation of V groove using grinder/files for making good surface for the welding for more than half circumferential joint	200	cm	-	-
1.05	Welding charges of prepared Mild steel sections in two rounds , etc including cost of consumables, etc. but excluding carriage of equipment to site, etc. By electric welding	400	cm	-	-
1.06	After the job is completed in all means back filling of the earth pit manually with same excavated earth material (85 % of the above excavated earth)	4.33	cum	-	-
1.07	Mechanical transportation, loading, unloading and handling of various items such as welding tools & plant, Hoisting arrangements etc. using appropriate means of transport from work shop to site and back.	2	trip	-	-
2Realignment of laid 400 mm dia. MS delivery pipe of unit No 4th fitted with 400 mm dia NRV laid beneath the machine floor level having less working space and as such requires special tools/tackles and highly skilled technician for carrying the job at Tral Stage 3rd. The Job shall comprise :-
2.01	Cutting of the 400 mm dia. 8 mm thick MS delivery pipe at suitable spot using oxy acetylene gas cutter in such a way that it gets detached and segmented in to two unequal portions/segments. The detached pipe shall be properly supported on both the free ends by mechanical support during the execution of the job to prevent any major damage due to misalignment of the piping system.	1	Job	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.46 MB

Work Item Documents

BOQ_1110700.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Repairing/maintenance/welding of 1200 mm dia. Rising main of LIS Tral Stage 3rd at RD 580 for rectification of leakage of pipe joint. The welding is to be done by arranging of diesel generator at site due to non-availability of electricity at working place. The job involves complete draining out of 1200 mm rising main through washout and utilizing services of semi-skilled /skilled labors having good knowhow of the job. The joint being partially underground needs excavation of earth pit to expose properly for proper welding. The job involves following works to be carried at site.
1.01	Earth work in bulk excavation by manual means of size 6 feet length X 6 feet width X 5 feet depth pit to expose the base of the pipe also to accesses the proper leakage spot and make a working place and also to make it easy for welding of the leakage point.	5.1	Cum	-	-
1.02	Providing of power supply at site by using generator of required capacity for purpose of welding/grinding etc. due to non-availability of power supply at the leakage spot.	1	Job	-	-
1.03	Cutting of the existing old weld bead by way of oxy acetylene gas cutter for more than half circumferential joint	200	cm	-	-
1.04	Preparation of V groove using grinder/files for making good surface for the welding for more than half circumferential joint	200	cm	-	-
1.05	Welding charges of prepared Mild steel sections in two rounds , etc including cost of consumables, etc. but excluding carriage of equipment to site, etc. By electric welding	400	cm	-	-
1.06	After the job is completed in all means back filling of the earth pit manually with same excavated earth material (85 % of the above excavated earth)	4.33	cum	-	-
1.07	Mechanical transportation, loading, unloading and handling of various items such as welding tools & plant, Hoisting arrangements etc. using appropriate means of transport from work shop to site and back.	2	trip	-	-
2Realignment of laid 400 mm dia. MS delivery pipe of unit No 4th fitted with 400 mm dia NRV laid beneath the machine floor level having less working space and as such requires special tools/tackles and highly skilled technician for carrying the job at Tral Stage 3rd. The Job shall comprise :-
2.01	Cutting of the 400 mm dia. 8 mm thick MS delivery pipe at suitable spot using oxy acetylene gas cutter in such a way that it gets detached and segmented in to two unequal portions/segments. The detached pipe shall be properly supported on both the free ends by mechanical support during the execution of the job to prevent any major damage due to misalignment of the piping system.	1	Job	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Repairing/maintenance/welding of 1200 mm dia. Rising main of LIS Tral Stage 3rd at RD 580 for rectification of leakage of pipe joint. The welding is to be done by arranging of diesel generator at site due to non-availability of electricity at working place. The job involves complete draining out of 1200 mm rising main through washout and utilizing services of semi-skilled /skilled labors having good knowhow of the job. The joint being partially underground needs excavation of earth pit to expose properly for proper welding. The job involves following works to be carried at site.

1.01

Earth work in bulk excavation by manual means of size 6 feet length X 6 feet width X 5 feet depth pit to expose the base of the pipe also to accesses the proper leakage spot and make a working place and also to make it easy for welding of the leakage point.

5.1

Cum

1.02

Providing of power supply at site by using generator of required capacity for purpose of welding/grinding etc. due to non-availability of power supply at the leakage spot.

Job

1.03

Cutting of the existing old weld bead by way of oxy acetylene gas cutter for more than half circumferential joint

200

1.04

Preparation of V groove using grinder/files for making good surface for the welding for more than half circumferential joint

200

1.05

Welding charges of prepared Mild steel sections in two rounds , etc including cost of consumables, etc. but excluding carriage of equipment to site, etc. By electric welding

400

1.06

After the job is completed in all means back filling of the earth pit manually with same excavated earth material (85 % of the above excavated earth)

4.33

cum

1.07

Mechanical transportation, loading, unloading and handling of various items such as welding tools & plant, Hoisting arrangements etc. using appropriate means of transport from work shop to site and back.

trip

2Realignment of laid 400 mm dia. MS delivery pipe of unit No 4th fitted with 400 mm dia NRV laid beneath the machine floor level having less working space and as such requires special tools/tackles and highly skilled technician for carrying the job at Tral Stage 3rd. The Job shall comprise :-

2.01

Cutting of the 400 mm dia. 8 mm thick MS delivery pipe at suitable spot using oxy acetylene gas cutter in such a way that it gets detached and segmented in to two unequal portions/segments. The detached pipe shall be properly supported on both the free ends by mechanical support during the execution of the job to prevent any major damage due to misalignment of the piping system.

Job