REPAIR OF FLOOR TILLING, KOTA STONR, PCC AND PLINTH PROTECTION AND CLEANING REPAIR OF PVC WATER TANK AT SWT AND REPAIR/MAINT OF 25 YARD MINUATURE RANGE AND EARTH FILLING WORK IN TECH AREA AT AFS PHALODI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusve of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

Demolition cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposed off from site complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1, (1:2:4) using 12.5 mm graded stone aggregate as in leveling course of flooring complete all as specified and directed.

M&L for 100 mm thick Cement concrete type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base for path/ flooring complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for joint free (edge cut) white glazed ceramic tiles 450x300x7mm/ 350x250x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to the match tiles on vertical surface over and including 10mm thick plaster in CM (1:4) complete all as specified and as directed.

M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.

All as per item No 10.00 (here-in-before) above but as in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.

Dismantling of stone slabs and tiles laid dry or laid dry & pointed of any description or thickness in floors, aprons etc, complete all as specified and directed.

Labour only for relay of Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

Labour only for relay of Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.

Labour only for relay of Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 100 mm thickness, M-50 Grade complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with pigment to match the shade of the slab including rubbing and polishing including screed bed and bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes size complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1, (1:2:4) using 12.50 mm graded stone aggregate as in leveling course of flooring & roof complete all as specified and directed.

M&L for Jodhpur stone of 75mm thick, having smooth surfaces of size n.exc. 0.11 sqm use in any type of work with sharpe edge and flush jointed in CM (1:6) complete all as specified and directed.

M&L for 25 cm to 30 cm thick sand filling under floors or in foundation inclding watering and consolidation complete all as specified and directed

M&L for filleting of section in repair exc 25 sq cm but not exc 50 sq cm, in any position and to any shape in cement mortar (1:4) including excavation and earth work and all mitres, stops, etc complete all as specified and directed.

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

M&L for cleaning and removing all scale and dirt etc from tanks exc 250 litre but not exc 500 litre capacity of any type (AC, RCC or PVC) and cleaning mouths of circulating pipes etc and writing date of cleaning on tank using enamel paint complete all as specified and directed. Note :- (a). The size and pattern of letters of date shall be approved by Engineer-in-Charge. (b). The unit rate quoted deemed to be included of cost of bleaching powder or any other cleaning agent to be used for tank cleaning.

M&L for cleaning and removing all scale and dirt etc from tanks exc 500 litre but not exc 1000 litre capacity of any type (AC, RCC or PVC) and cleaning mouths of circulating pipes etc and writing date of cleaning on tank using enamel paint complete all as specified and directed. Note :- (a). The size and pattern of letters of date shall be approved by Engineer-in-Charge. (b). The unit rate quoted deemed to be included of cost of bleaching powder or any other cleaning agent to be used for tank cleaning.

M&L for dewatering of residual water, disilting and mud Cleaning of SWT of capacity upto 50000 gallon as mentioned below :- (a) The inner surface of the wall of tank shall be cleaned with high pressure jet pump after emptying the water in the tank. (b) After through cleaning of the tank, the cleaned water and sludge is to be removed by using pump and sludge has to be disposed off at a place as directed. (c) After made the Tank dirt free, the inner surface of Tank shall be treated with approved anti bacterial agents by GE. (d) After the tank treatment as mentioned at Srl No (c) (here-in-before) , the inner surface of the Tank shall be treated with UV-Radiator. (e) Writing date of cleaning on tank using synthetic enamel paint with letters n. exc 30 cm high. (f) Removal of any tiny plants and vegetation any position and necessary repair work of SWTs. Note :- (a) Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high letters etc., shall be painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained. (b) The unit rate quoted deemed to be included cost of bleaching powder or any other cleaning agent to be used for tank cleaning. (c) Cost of earthwork and excavation at places deemed to be included in unit rate quoted.

S&F rotational moulded polyethylene water storage tank triple layer of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position with all necessary GI fittings all as specified in SSR Pt I including dismantling water tank of 500 Ltr capacity complete all as specified and

S&F rotational moulded polyethylene water storage tank triple layer of capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position with all necessary GI fittings all as specified in SSR Pt I including dismantling water tank of 1000 Ltr capacity complete all as specified and

S&F in repair PVC water storage tanks cover for capacity exc 500 ltr but not exc 1000 ltr including rotational/screw type or driling holes for nut and bolts complete all as specified and directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 25mm dia (minimum weight 455 gms) complete all as specified and directed.

Dismantling wrough iron work or mild steel work of any description complete all as specified and directed.

S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer complete all as specified & directed.

M&L for preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbibg down and removing all drops , dirts and splashes etc.complete all as specified.

Taking down cement plaster on brick or stone walls ,ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick comprising first coat 10 mm thick in cement mortar (1:6) and second coat of 5 mm thick in cement mortar (1:4) mixed with water proofing compound in second coat only on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured and paid seperatly.

Supply only water proofing compound complete all as specified and directed .

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of 1st grade quality white or any tint over a coat of primer complete all as specified and directed.

Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for precast cement concrete type C-1, (1:3:6) using 20mm graded aggregate masonry with solid blocks exc 10cm in width and setting in cement mortar (1:6) in wall complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nanital or similar pattern roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Excavation over area for depth n.exc 1.5m deep and getting out saw dust and sand soft/loose on stop butt and rocochet pit complete all as specified and directed.

M&L for sand filling with saw dust under floor or butt area before proper mixing sand saw dust in ratio (1:1.5) including well ramming & watering complete all as specified and directed.

Removing damage filling/empty old bag (proof) n. exc 50m and depositing where directed at a level n. exc 1.5m above starting point complete all as specified and directed.

M&L for sand filling the bags (proof) and laying around the butt of firing range as per users direction complete all as specified and directed. Note: (i) The firing range maintanance considered in three quarters. (ii) Cost of bags deemed to be included in unit quoted rate.

Excavation over area for depth n.exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

M & L for Sand filling as in traverse wall/BP including Spreading and levelling in layers n exc. 25m thick under floors or in foundations including watering and consolidation complete all as specified and directed

Removing excavated material n.exc 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point in soft/loose soil complete all as specified and directed.

Dismantling of Marble/kota stone /Jodhpur stone laid bedded & pointed in any mortar of any description or thickness in floos,aprons etc complete all as specified and directed.

KRISHNA CONSTRUCTION COMPANY (BID ID -3310367)