Tender for Requirement of Spares and job work for installation of fuel level monitoring sensor in various Heavy Earth-Moving machinery like Excavator, Dozer, Dumper, Truck, Trailor.

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are

given to provide a common basis for bidding. The basis of payment will be the

actual quantities of work ordered and carried out, as measured by the Contractor

and verified by the Engineer and valued at the rates and prices tendered in the

priced Bill of Quantities, where applicable, and otherwise at such rates and prices

as the Engineer may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far

as it is otherwise provided under the Contract, include all constructional plant,

layout, supervision, materials, erection, maintenance, insurance, profit, taxes

and duties, together with all general risks, liabilities and obligations set out or

implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed

to enter a rate or price shall be deemed to be covered by other rates and prices

entered in the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included

in the items provided in the priced Bill of Quantities, and where no Items

are provided the cost shall be deemed to be distributed among the rates and prices

entered for the related items of Work.

7. General direction and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant

sections of the contract documentation shall be made before entering rates

or prices against each item in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for Road and Bridge works. For building works specifications for

building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of

compressed air drilling for its removal, and which cannot be extracted by ripping

with a tractor of at least 150 kw with a single rear mounted heavy dutyripper.

Signature of the Contractor Executive Engineer

BILL OF QUANTITIES

(A)Percentage Rate Tender (Up to INR 50 Cr.)

Item Description of Item (with Quantity Unit Rate in Amount

No brief specification and figure

reference to book of

specifications)

1 Estimate for Requirement of Spares 01 Job 11,42,685.00

and job work for installation of fuel

level monitoring sensor in various

Heavy Earth-Moving machinery

like Excavator, Dozer, Dumper,

Truck, Trailor.

I/We am/are willing to carry out the work at………………….% above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my

/our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Signature of the Contractor Executive Engineer