REPAIR AND MAINT OF CERTAIN WOOD, STEEL, MAP AND TRADE PATTERN FURNITURE AT GE IMA DEHRADUN

Bed hard steel (FD/E6/MAP/08)

S & F following components of Bed hard steel including dismantling unservicable one all as specified and as directed. (a) 12mm thick BWR phenol bonded commercial plywood on top of the bed.

Head Board 18mm thick prelaminated particle board including 04mm PVC beading.

Foot Board 18mm thick prelaminated particle board including 04mm PVC beading.

Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of Black synthetic enamel paint including four Nos of hard rubber shoes.

S&F FMN Holder duly welded

Repair/Relacement of following u/s parts of "Almirah large steel 1/2h x 1/2s" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (Drg No. FD-1033)

S&F New lock of 6 lever with duplicate key of approved quality.

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer.

S & F Handle 110 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed

S & F 3 way locking device including all mechanism with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 110mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting)

S&F of suitable pattern MS clamps for holding of almirah shelves.

S&F new chromium plated 20 mm dia hanging rod of existing shape and size.

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: shade of paint shall be as approved by GE.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Replacement of old torn unserviceable Mattress cover with new required size cover of best quality cloth, cloth should not be less then Rs 250/- per meter, including a long side TKK chain fixed properly on the mattress as approved by GE. (TP)

Replacement of old torn Godrej/Harrison/Link/Lico Pillow cover with new required size cover of best quality cloth (white), cloth should not be less then Rs 500/- per meteras approved by GE.(TP)

Repair/Replacement of followingGodrej/Harrison/Link/Lico parts of "Computer chair revolving/high back and med back" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge Drg (FD/E6/MAP/01)

S&F suitable new 12 mm thick hot pressed plywood complete to match the original seat as shown on drg.

S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for seat.

S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 350/- per RM) alongwith PVC lipping all round the seat fixing as exesting

S&F suitable new 12 mm thick hot pressed plywood for back as shown on drg.

S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for back.

S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 300/- per RM) alongwith PVC lipping all round the back.

S&F suitable new armrest made of black integral skin polyurethane & hardness with nuts & bolts.

S&F suitable hydraulic system with droplift mechanism of backrest adjusted as per existing shape & size.

S&F suitable MS bearing of existing shape & size of various type chair revolving steel.

S&F new wheeled 4/5 prong base of existing shape & size with nut & bolts to chair revolving steel of various types.

S&F suitable caster wheels of existing shape & size with nut & bolts.

Two or more coat painting of synthetic enamel paint on frame of Chair computer with high class finishing including necessary welding and smoothness of surface.

Repair/Replacement of following u/s parts of "Chair dining MAP Officer" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge (FD/MAP-II/04)

S&F of new front legs.

S&F of new rear legs.

S&F of new stiffeners.

Replacement of old torn u/s cloth of seat with new synthatic tapestry cloth of best quality not less than Rs. 350/mtr as approved by GE, along with new markin cloth of matching colours as per drg or as directed.

Repair/Replacement of u/s plywood of seat with 6mm new comercial plywood.

Replacement of u/s foam of seat with new foam of 75mm thick with 40 density and fixing it with seat as per drg or as directed.

S&F of new Buffers

Tightening of complete chair by suitable size Bambo Skewers & wood corner as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/replacement of following u/s parts of " Table bed side MAP" with suitable new parts of existing shape & size complete to match the original as shown on drg and all as directed. (FD/E6/MAP/15)

S&F new top of existing size made of 18mm thick prelaminated MDF board with 4mm thick teak wood half round beading all round of table top.

S&F different new parts of small drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading.

S&F different new parts of large drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading.

S&F suitable size new back/base of table bed side, made out of 6 mm thick commercial ply wood duly screwed as shown on drg as directed.

S&F suitable size new sides of table bed side, made out of 18mm thick prelaminated MDF board duly screwed as shown on drg as directed.

S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of drawer as approved by GE.

S&F of new handle for drawer of table bed side MAP as approved by GE.

S&F of new hard rubber shoes (black) to legs of table bed side MAP as approved by GE.

Repair/repalcement of old u/s front legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.

Repair/repalcement of old u/s rear legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.

Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats walnut/lacquere polish for all beading and view portion of table Bed Side match with MDF grains and synthetic enamel black paint on wooden/steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed.

Repair/Replacement of following U/S parts of "Chair Dining JCO's /ORs" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge(FD/MAP-II/05)

S&F of new 4mm thick PVC seat with holes & is not less than 0.500 kgs alongwith wooden support in the middle as directed by Engr-in-Charge.

S&F of new Buffers

S&F of new Front leg (teak wood)

S&F of new Rear legs (teak wood)

S&F of new Front/rear rail (teak wood)

S&F of new Stiffeners.

Tightening of complete chair by suitable size bamboo skewers & wood corner as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Replacement of following U/S parts of "Table Dressing (ladies) with Stool " with suitable new parts of existing shape & size complete to match the original as shown on drg and directed. (FD/MAP-II/07)

S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x380x5mm thick as approved by GE.

S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick ply wood with 4mm thick teak wood half round beading as per drg & directed.

S&F suitable new frame of first class hard wood (Teak) including 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed.

S&F suitable new top of table dressing ladies (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.

S&F suitable new side planks of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.

S&F suitable new door plank of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.

S&F suitable new bottom (box) of 12mm thick plywood as shown on drg.

S&F suitable new stainless steel piano hinges and one nos magnetic catcher as shown on drg.

S&F of new heavy duty mild steel telecscopic channel for smooth functioning of drawer as approved by GE.

S&F suitable new 50 mm long 'D' shaped stainless steel handle as approved by GE.

S&F suitable new 75 mm long 'D' shaped stainless steel handle as approved by GE.

S&F suitable new bottom of 06mm thick plywood for stool dressing (box) as shown on drg.

S&F suitable new 12mm th ply openable shutter for stool dressing (box) as shown on drg.

S&F new cushion foam of 75mm thick and 40 density for seat of stool dressing (box) as shown on drg.

S&F new leatherite cloth for seat of stool dressing (box) as shown on drg as approved by GE.

S&F suitable new heavy duty revolving nylon double wheels for stool dressing (box) as shown on drg.

S&F suitable new front plank for stool dressing (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.

S&F suitable new back plank for stool dressing (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.

S&F suitable new wooden battern (1" x 1")

S&F suitable size new side plank for stool dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.

Tightening of complete table dressing by suitable size nails and screw as directed by Engr-in-Charge on site.

M&L for two or more coats walnut/lacquere polish for all beading and view portion of table dressing match with grains

Repair and re canning of "Chair varandha" as per existing shape & size complete to match the original as per drg and all directed by Engr-In-Charge. FD-256

S & F in repair MS conduit 20mm bore,1.6mm thick, upto 30cm length, made to shape, duly welded components of Chair verandah all as specified and as directed.

Tuck welding to broken legs and frames of chair verandah

S&F of new PVC shoes 20mm dia at bottom of legs.

Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour.

Re-canning of chair verandah both seat and back with 4/5mm wide and half round superior quality white plastic cane as approved by GE

Repair/relacement of following U/S parts of "Chair Writing MAP/Chair Visitor" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD/E6/MAP/12

S&F suitable new12 mm thick hot pressed plywood for seat.

S&F suitable new moulded polyurethane foam of 50mm thick with 32 density for seat.

S&F suitable new synthetic tapestry/leatheritte raxine cloth as approved by GE (Cloth shall not be less than 300/- per RM) alongwith PVC lipping all round the seat.

S&F suitable 12 mm thick hot pressed plywood for back.

S&F suitable fabric & moulded polyurethane foam cushion 50mm thick & 32 mm density for back

S&F suitable new synthetic tapestry/leatheritte raxine cloth as approved by GE (Cloth shall not be less than 300/- per RM) alongwith PVC lipping all round the back

S&F suitable new armrest made of black integral skin polyurethane & hardness with nuts & bolts.

S&F suitable new rubber stopper.

Two or more coat painting of synthetic enamel paint on frame of chair writing/chair visitor with high class finishing including necessary scrapping / welding and smoothness of surface.

REPAIR TO TABLE CENTRE(FD-235, 274):

Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18 mm thick preliminated MDF board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood.

Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item.

Removing of old U/S Rails and S&F new Rails of seasoned shisham/teak wood as per drg match the existing surfaces of the item.

M&L for preparation of wooden surfaces of the Center Table with sand/emery paper and applying lacquer polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified

S&F Buffers

SOFA SET Single Seater (TP) M&L for removing the old worn/torn out cushion from SOFA SET Single Seater (TP) and tapesty cloth from seat and back of sofa and providing new cushion of 40 density cool foam of size 560 x 530x110mm thick including provision tapesty cloth of approved shade & quality

M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from SOFA SET 5 SEATER Special (TP) and providing new synthetich tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 550/- per metre) with tapering as existing.

M&L for removing unserviceable/ broken Front Legs of SOFA SET 5 SEATER Special (TP) and S&F New Front Legs to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken rear legs of SOFA SET 5 SEATER Special (TP)and S&F new rear leg to match the original complete all as specified and directed.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Chair Revolving with Arms(TP)/ Chair high back mesh tourision bar mech, make - Eezy model - 280/Chair high back recliner wooden base arms, make - eezy model - 210,Chair revolving steel w/arms FD- 75 (m)/Chair Computer Make Eezy and Godrej (all are high back Executive chairs)

Removing old unsv Hydraulic mechanism and S & F new Hydraulic mechanism of approved quality complete all as specified. Make of Hydraulic Mechanism :-CSS Power Hydraulic, P P CHAIR Power Hydraulic or equivalent.

Removing old unsv castor wheel and S & F new castor wheel of approved quality complete all as specified. Make: Seltos/Breewell & PP Chair

Removing old unsv hand rest and S & F new one as existing shape and size should be fitted with suitable nut bolt/welding with all iron surface directed to view when placed in position shall be painted with enamel paint using spray machine to match the colour and provision of leatheritte raxine wherever required rest all as directed of approved quality directed by Engr-in-Charge Make: PP Chair/Rajchief and Breewell

Removing old unserviceable back frame from Chair Revolving and S & F new back frame complete as existing moulded PU foam seat duly covered with finest quality rexine/tapestry cloth complete of existing size, shape, pattern complete all as specified and shown on drg and directed by Engr-in-Charge

Removing old unserviceable Seat frame from Chair Revolving S & F new Seat frame complete as existing moulded PU foam seat duly covered with finest quality rexine/tapestry cloth complete of existing size, shape, pattern complete all as specified and shown on drg and directed by Engr-in-Charge

Sofa Set 5 Seater(1+3+1) with cushioned. (Drawing no.FD/MAP-II/02)

M&L for removing the old worn/torn out cushion from sofa sets 5 seats and tapesty cloth from seat and back of sofa and providing new cushion of 40 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & quality

M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from sofa sets 4/5 seats and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 550/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed.

M&L for removing unserviceable/ broken Front Legs of Sofa Set 5 Seater(1+3+1) with cushioned.and S&F New Front Legs to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken rear legs of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new rear leg to match the original complete all as specified and directed.

M&L for removing unserviceable seat plywood of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new plywood of 12 mm BWR to match the original complete all as specified and directed.

M&L for removing unserviceable back plywood of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F back plywood of 12 mm BWR to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken back rail for three seater of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new back rail to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken front rail for three seater of sofa set 5 seater and S&F new front rail to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken hand rest of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F New hand rest to match the original complete all as specified and directed.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

S&F Buffers

Repair/Relacement of following U/S parts of "Teapoy" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD-232 /278/382

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 600x400mm with 4mm thick half round beading all round of table top as directed.

Long rails

Short rails

Stiffeners

Buffers

Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Charpoy GI pipe ( Drg No FD-220)

S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy.

Conversion of 32 mm dia long rail obtained from item No 3.10 above two short rail after cutting and one short rail threading both ends and fixing to 3 way 32 mm dia existing elbow. Note : Count one short rail each for this item

Conversion of 32 mm dia short rail obtained from item No 3.20 above two leg after cutting and one leg threading one ends fixing to 3 way 32 mm dia existing elbow at one end threaded and cover the other end with hard rubber/PVC shoe. Note : Count one leg each for this item

S & F in repairs 3 way 32 mm dia GI elbow ISI marked complete as per specified.

S & F in repairs check nuts of 32 mm dia ISI marked complete as per specified.

S & F in repairs 12 mm BWR phenol bonded commercial plywood of existing size including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood.

S & F in repairs MS flat of size 40x4mm with two Nos nut & bolts as stiffner shall be fitted for support of plywood.

S&F FMN Holder duley welded and dismenteling the unsv one

Converstion of Charpoy GI pipe ( Drg No FD-220) With Newar into Hard Top

S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy.

Conversion of 32 mm dia long rail obtained from item No 3.10 above two short rail after cutting and one short rail threading both ends and fixing to 3 way 32 mm dia existing elbow. Note : Count one short rail each for this item

Conversion of 32 mm dia short rail obtained from item No 3.20 above two leg after cutting and one leg threading one ends fixing to 3 way 32 mm dia existing elbow at one end threaded and cover the other end with hard rubber/PVC shoe. Note : Count one leg each for this item

S & F in repairs 3 way 32 mm dia GI elbow ISI marked complete as per specified.

S & F in repairs check nuts of 32 mm dia ISI marked complete as per specified.

S & F in repairs 12 mm BWR phenol bonded commercial plywood inlieu of old Newar including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood.

S & F in repairs MS flat of size 40x4mm with two Nos nut & bolts as stiffner shall be fitted for support of plywood.

S&F FMN Holder duley welded and dismenteling the unsv one

Almirah steel large (FD-67/1031)

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed

S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer.

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: shade of colour shall be asapproved by GE.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Almirah steel med (FD 67/1032)

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed

S & F Handle 100 mm size chromium plated heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed.

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer.

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: shade of colour as approved by GE.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Almirah steel med 1/2 Hanging ,1/2 Shelves (FD 1034)

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed

S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed.

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting)

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: shade of colour shall be as approved by GE.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Repair/Relacement of following u/s parts of "Almirah glazed steel " with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD 104(M)

S&F New lock of 6 lever with duplicate key of approved quality.

S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

S&F new Chromium Plated handles complete with nut and bolt as approved by GE.

S&F new hinges (75mm).

S&F of new legs made out of 1.00 mm thick MS sheet to match the original as shown on drg and directed by Engr-In-Charge.

S&F of suitable pattern MS clamps for holding of almirah shelves.

S&F of new glasses of existing shape & size as shown on drg and directed by Engr-In-Charge.

S&F new bush (chakri) of suitable pattern for the locking system.

S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel.

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: shade of colour shall be as approved by GE.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Locker Bed Side Steel (FD-1029, FD-257)

S & F Hasp and Staple of 100 mm size chromium plated Heavy components of Locker steel including dismantling unservicable one all as specified and as directed.

S & F Hasp & stapple chromium plated components of Locker steel including dismantling unservicable one all as specified and as directed.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size, Haps and Staple of approved quality, painting with one coat of synthetic enamel paint shade as directed by Engr-in-Charge over a coat of primer inside and outside and Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall be applied after preparation of surface all as specified and shown on drawing. Note:- All steel surface shall be done with spray painting.

Removing the existing worn out side holder with 20mm dia aluminium conduit pipe of locker bed side steel and S & F new side holder with 20mm alluminium conduit pipe as per existing. Shape and size shown on drawing all as specified and directed by Engr-in-Charge.FD-1029

Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall after preparation of surface all as specified and shown on drawing directed by Engr-in-Charge.

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: shade of colour shall be as approved by GE.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Locker Bed Side Steel( SKD-562 )

Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall after preparation of surface all as specified and shown on drawing directed by Engr-in-Charge.SKD-562

Removing the existing unserviceable handle and S & F new handle chromium plated 100mm in Heavy patteren all as specified and directed by Engr-in-Charge.SKD-562

3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

Removing the existing worn out side holder and hanging conduit pipe of locker steel and S & F of new side holder and hanging conduit pipe as per existing shape and size shown on drawing and all as directed by Engr-in-Charge.SKD-562

Taking down old unserviceable existing lock of locker steel and S & F new lock 7 lever duplicate key all as specified and directed by Engr-in-Charge. SKD-562

Removing the existing unseviceable hinges and S & F new hinges duly welded as per existing shape and size all as specified and directed by Engr-in-Charge.SKD-562

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside. And outside Two coat of spray painting of Hammertone paint ( pattern of hammertone shall be 0.06gr silicon/kg) Shall after preparation of surface complete all as specified and shown on drawing. Note :- All steel surface shall be done with spray painting.

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: shade of colour shall be as approved by GE.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including removal of dents/bends all as specified and as directed. Note:- Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as approved by GE.

Table steel 3' x 1½' examination (covered with 1mm thick black sun mica) FD -GE/PN/F-4

Removing the existing unserviceable top of Table and S & F the same made of 18mm thick pre laminated MDF board duly post forming laminates rest as specified and as directed.

Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge shape complete all as specified and shown on drg .All Joints duly welded/Screwed as per Drgs

Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Olive green synthetic enamel paint including four Nos of hard rubber shoes. shade of colour shall be as approved by GE.

Repair/Relacement of following U/S parts of " Form Without Back/Form with Back " with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD-77,FD 1027

S&F new Seat of first class hard wood teak duly polished and fixed as per drg and directed.

S&F new Back of first class hard wood teak duly polished and fixed as per drg and directed.

S & F new Seat Frame of Exesting size made from 1.5mm thick 25 mm M/S tube as exestingduly welded

S & F new Legs of Exesting size made from 1.5mm thick 25 mm M/S tube as exestingduly welded

Tightening of complete form without back by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats of spray painting and walnut polish on steel & wooden surface of form without back with high class finish, including necessary rubbing, denting and smoothness surfaces all as directed by engr in charge.

Table steel computer 1220x610x750

S&F new top of 18mm thick prelaminated MDF board duly postforming laminated of exesting size

S&F new side plank of 18mm thick prelaminated MDF board as shown on drg.

S&F new keypad tray of 18mm thick prelaminated MDF board including beading.

S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of key board drawer as approved by GE.

S&F of new bottom shelf of 18mm thick pre- laminated MDF duly postforming laminated of exesting size

S&F of new hard rubber shoes (black)

Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats synthetic enamel BL Greay paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed by engr in charge.

S&F of uphlostray of aprroved quality and shade and letheratte raxine of Sofa Set double Seat(TP), Sofa Set Single Seat(TP) , Sofa Set 2 Seater SK-577 Sofa set 05 Seater make of Godrej including minor surface reparing whereverey required and polishing with lacquer polish for smoothness of surface as existing and directed by Engr-in-charge.

Repair/Relacement of following U/S parts of Wodden Bench & Desk (TP) with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge

S&F new Seat/Back top of Teak wood as exesting

Stiffeners (foot rest)

Buffers

Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Rack shoe steel (FD/E6/Map/02 ®

S&F new wire mesh of 3 mm of duly wleded/fitted in tube frame of rack shoes steel

Change of tubler frame of exesting size and replace the exesting one

Rubber Shoes

Spray Painting two or more coats of synthetic enamel of black shade paint on old painted surface

Repair/Relacement of following U/S parts of "Bed Hard with ply top" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD-21, 246, 247, SK-

S&F 04 mm thick both side teak face ply all over the head rest of bed including teak wood beading.

S&F 04 mm thick both side teak face ply all over the foot rest of bed including teak wood beading .

Removing old unserviceable head board and supply & fixing new head board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish.

Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish.

S&F new long rail made out of teak wood size1800x90x35mm as per drg and directed by Engr in charge.

S&F new short rail/center stiffner made out of teak wood size 900x90x35mm as per drg .

S&F new clamps for holding of MNF set as per drg and directed by Engr in charge.

S&F new 12mm thick BWR phenol bonded commercial plywood of size 1800x900mm , fitted with suitable nut & bolt complete to match the existing shape and size.

Tightening of complete bed by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat Lacquer polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Spray Painting two or more coats of synthetic enamel of approved shade paint on old painted surface to under mentioned items of steel furniture with high class finishing including necessary scrapping, denting ,welding and smoothness surfaces as shown on drg and directed by Engr-in-charge.

Chair CBA special with hand rest.FD-260

Ladder for loft.FD-44, 238

Metal shelving Rack adjustable type small FD-69 (M)

Metal shelving rack adjustable type large FD-69 (M)

Rack side steel with four tray FD-97(M), 1023

Repair/Relacement of following U/S parts of "Peg Table" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD 277

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 450x300mm with 4mm thick half round beading all round of table top as directed.

Long rails

Short rails

Stiffeners

Buffers

Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Teapoy" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD-232 /278/382

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 600x400mm with 4mm thick half round beading all round of table top as directed.

Long rails

Short rails

Stiffeners

Buffers

Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Table Writing FD/Med" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge FD-33, 249, 275

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 1145x600mm with 4mm thick half round beading all round of table top as directed.

Leg (35x35x760mm)

Long rails

Short rails

S&F of new sides of box made of 18/19mm thick MDF board as per drg and directed by Engr-In-Charge.

S&F of new door made of 18mm thick MDF board fixed with suitable piano type hinges alongwith 04mm thick teak wood beading & knob / handle as per drg and directed by Engr-In-Charge.

S&F of new self of 18/19mm thick MDF board as per drg and directed by Engr-In-Charge.

S&F of new central leg (150 to 200mm long) of teak wood as per directed by Engr-In-Charge.

S&F suitable new knobs / handle of approved quality.

Buffers

S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.

S&F of new back ply of 6mm thick as per drg and as directed by Engr-In-Charge.

Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Dining Longback " with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by In-Charge.FD-357

Front legs

Rear legs

Stiffeners

Back straps

Front /side rails

Buffers

S&F suitable new 12 mm thick commercial plywood for seat as shown on drg.

S&F suitable size new foam of 50mm thick & 32 density covered with marking cloth for seat.

S&F suitable new leatherette rexine of existing shape & size complete to match the original seat (rexine shall not be less than 350/- per RM).

S&F suitable new 12 mm thick commercial plywood for back as shown on drg.

S&F suitable size new foam of 50mm thick & 32 density covered with marking cloth for back.

S&F suitable new leatherette rexine of existing shape & size complete to match the original back (rexine shall not be less than 350/- per RM).

Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Polishing with French polish (two coat) to under mentioned items of furniture article with high class finishing (after rubbing/scrapping/smoothness and filling) to complete side (inside and outside) as existing shape and size in drg as directed.

Book self open small DB-4121

Almirah medium wooden with self

Almirah medium wooden 1/2 h & 1/2 s

Repair/Relacement of following U/S parts of " Sofa Set 4/5 Seater" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD 258,281, 373

Front/Rear legs

Side rails

Front/rear side long rails

Arm/Handles

Wooden battens

Buffers

Tightening of complete sofa set by suitable size screw ,Bambo Skewers & wood corner wherever required as directed by Engr-in-Charge on site.

For 4 Seater M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

For 5 Seater M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Re cushioning of sofa set 02,03,04 & 05 seater : Re cushioning of sofa set 02,03,04 & 05 seater : Removing of old u/s cushion foam of sofa set 2,3,4 & 5 seater and S&F new cushion foam 100mm thick and 40density, size 22”x21”x4” duly covered & stiched with new cover made out of superior quality tapestry cloth as approved by GE, not less than Rs. 650/-per meter including markin cloth and one side TKK chain fixed with cover for seat and back wherever will be directed suitable for drg no FD-258, FD-281, FD-373 or as directed. (Drg FD-258, FD-281, FD-373)

S&F suitable size new (seat & back) 100mm thick & 40 density velvet cloth cover and TKK chain fixed having cost of cover not less than 300/-per mtrs all as drg and as directed by Engr- in- charge.

S&F suitable size new cushion foam (seat & back) 100mm thick & 40 density along with velvet cloth cover and TKK chain fixed having cost of cover not less than 300/-per mtrs all as drg and as directed by Engr- in- charge.

Repair/Relacement of following U/S parts of " Table Dressing Ladies" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD 251,378

S&F drawer of preleminated MDF board 18mm thick exterior grade duly fixed with 4mm thick teak wood beading as per drg and as directed by Engr-in-Charge

S&F suitable new acrylic knob as approved by GE.

S&F frame of first class hard wood (Teak) including 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge

S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x366x5mm thick as approved by GE.

S&F suitable new table top/bottom of prelaminated MDF board of 18/19mm thick one side teak finish and other side white with 4mm thick half round teak wood beading

S&F suitable new side plank of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading

S&F suitable size new leg of 1st class hard wood teak as per drg and as directed by Engr-in-Charg.

S&F suitable new plain sliding glass as per drg and as directed by Engr-in-Charg.

Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Bed Hard with ply top" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD, 246, SK-

S&F 04 mm thick both side teak face ply all over the head rest of bed including teak wood beading.

S&F 04 mm thick both side teak face ply all over the foot rest of bed including teak wood beading .

Removing old unserviceable head board and supply & fixing new head board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish.

Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish.

S&F new long rail made out of teak wood size1800x90x35mm as per drg and directed by Engr in charge.

S&F new short rail/center stiffner made out of teak wood size 900x90x35mm as per drg .

S&F new clamps for holding of MNF set as per drg and directed by Engr in charge.

S&F new 12mm thick BWR phenol bonded commercial plywood of size 1800x900mm , fitted with suitable nut & bolt complete to match the existing shape and size.

Tightening of complete bed by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat Lacquer polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Replace of following U/S parts of "Table Bed Side" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. SK-572 FD-248 FD-276

S&F new side planks of size 230x510mm, made out of 18/19mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.

S&F new top of size 230x450mm, made out of 18/19mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.

S&F new 6mm thick back ply of size 510x450mm as per drg.

S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.

S&F new shelf made out of 18/19mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.

S&F new knobs for drawers as approved by GE.

Buffers

Tightening of complete table bed side by suitable size nails as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing.

Repair/Replacement of following U/S parts of "Chair Writing SK with cushion" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.SK 573

S&F of new Front legs

S&F of new Rear legs

S&F of new Front/back rails for seat

S&F of new Side rails for seat

S&F of new Arm/Handles

S&F of new Wooden plank for seat & back

Buffers

Tightening of complete chair by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

S&F suitable size velvet cloth cover and TKK chain fixed having cost of cover not less than 350/-per mtrs all as drg and as directed by Engr- in- charge.

S&F suitable size new cushion foam (seat) 75mm thick & 40 density along with velvet cloth cover and TKK chain fixed having cost of cover not less than 350/-per mtrs all as drg and as directed by Engr- in- charge.

Repair/Replacement of following U/S parts of "Chair Easy with two cushion seat & back" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.SK 574

S&F of new Front/rear legs

S&F of new Front/back rails for seat

S&F of new Side rails for seat

S&F of new Wooden plank for seat & back

S&F of new Side rails for back

S&F of new Arm/Handles

S&F of new Stiffeners

Buffers

Tightening of complete chair by suitable size Bambo Skewers /Steel Nails & wood corner wherever required as directed by Engr-in-Charge on site.

S&F suitable size new velvet cloth cover and TKK chain fixed having cost of cover not less than 300/-per mtrs all as drg and as directed by Engr- in- charge.

S&F suitable size new cushion foam (seat & back) 75mm thick & 40 density along with velvet cloth cover and TKK chain fixed having cost of cover not less than 350/-per mtrs all as drg and as directed by Engr- in- charge.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Replacement of following U/S parts of "Table Writing Clerk SK with drawer" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.SK 571

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 1145x600mm with 4mm thick half round beading all round of table top as directed.

S&F of new Leg (35x35x760mm)

S&F of new Long rails

S&F of new Short rail

S&F of new Stiffeners

S&F suitable size new sides of box made of 18mm thick MDF board.

S&F of new door made of 18mm thick MDF board fixed with suitable piano type hinges alongwith 04mm thick teak wood beading.

S&F suitable size new self of 18mm thick MDF board.

S&F suitable size new CPU box of 18mm thick MDF board at the bottom of table.

S&F suitable size new centre leg 150 to 200mm long.

S&F suitable size new handle/knobe as approved by GE.

S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.

S&F suitable size new back ply of 6mm thick.

S&F suitable size new key board drawer of 18mm thick MDF board with 04mm thick half round teak wood beading.

S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of key board drawer as approved by GE.

S&F new Buffers

Tightening of complete Table by suitable size Bambo Skewers /Steel Nails & wood corner wherever required as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Push Back Sliding Chairs/Tip Up" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge

S&F suitable new PU Foam (seat ) size 440x430x90 mm & 18 density.

S&F suitable new leather cloth (seat ) (approved type/ design/ colour) shall not be less than 250/- per RM.

S&F suitable new PU Foam (back ) size 535x440x65 mm & 18 density.

S&F suitable new leather cloth (back ) (approved type/ design/ colour) shall not be less than 250/- per RM.

S&F suitable new hand rest of existing shape & size with suitable nuts & bolts .

S&F suitable new 1.25mm thick floated aluminium beading of size 19x19x18 mm gauge with suitable nuts & bolts.

Repair of sliding mechanism with the use of new pulling springs and suitable nuts & bolts as to match with the existing tip up chairs.

Tightening of complete chair by use of suitable size screw/nails/ fastener as directed by Engr-in-Charge on site.

Two or more coat painting of synthetic enamel paint on frame of tipup chair with high class finishing including numbering of chair / welding and smoothness of surface.

Repair/Relacement of following U/S parts of "Charpoy folding steel" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge

S&F suitable new 12mm thick BWR phenol bonded commercial ply of size 1800x900mm, fitted in two pieces with suitable nut & bolt.

Tightening of complete charpoy by suitable size nut & bolt as directed by Engr-in-Charge on site.

S&F suitable size new PVC shoes as approved by GE.

Two or more coats painting of synthetic enamel paint on charpoy folding steel frame with high class finishing including necessary scrapping/ welding and smoothness of surface.

Please Enable Macros to View BoQ information