Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹3,930
Closing Date
9 Jun 2026, 3:00 pmClosed
The Principal
Government Polytechnic College Srirangam
Equipment Items
2026_DoTE_678388_1
2254/A3/2026
Limited
Miscellaneous Goods
Supply
7 days
Government Polytechnic College Srirangam
Refer Tender Document
5 documents required · 5 mandatory
₹0
₹3,930
17 Jun 2026
26 May 2026
10 Jun 2026
26 May 2026
9 Jun 2026
27 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dual Output Regulated DC Variable Power Supply-
Input Voltage : 230V/50 Hz ac.
Output Voltage : (0-30)V dc.
Output Current : (0-2)A.dc
Protection Circuit : Over Voltage, Over Current and short circuit protection.
High efficiency : Greater than 85 %.
Low ripple and noise less than 50 mv.
Digital display | 1 | Nos | - | - |
| 2 | Digital IC trainer kit with breadboard:
+5V dc, 1 A regulated power supply.
±12V dc /±15V dc, 200 mA regulated power supply.
Solderless breadboard with minimum 840 tie- points, power distribution buses.
ZIF(Zero Insertion Force)IC sockets to accommodated 8 or 16 pin ICs.
Logic input and output LEDs for output monitoring.
16 buffered LED outputs.
16 debounced switch inputs
Variable clock generator: 0.5 Hz to 50 Hz.
Single Pulse output : 100 ms(buffered,
Positive and negative outputs).
One seven-segment display with 4 BCD inputs.
Built-in logic switches.
Manual clock: Debounced push-button(one pulse per press). | 1 | Nos | - | - |
| 3 | DIGITAL STORAGE OSCILLOSCOPE-
Bandwidth: 50-100 MHz.
Sampling Rate: 1GS/sec.
Channels: 2 (Minimum).
Power Supply: 100V–240V AC, 50-60 Hz
Automatic Measurement: Vpp, Vavg,RMS, Frequency, Period, Vmax, Vmin, Rise Time, Fall Time, + Width, - Width, +Duty, - Duty etc.,
Horizontal Scale: 5 ns/div – 50 s/div or equivalent
Vertical Resolution: 8 bits (2 Channels simultaneously)
Vertical Sensitivity: 1 mV/div – 10 V/div (at input)
Waveform Math: +, -, x , ÷, invert, FFT etc., Waveform Storage: 16 waveforms or equivalent
Communication Interface: USB Host, USB interface.
C 7-inch color display or equivalent
Input impedance - 1 MΩ ±2%, // 20 pF
Accessories:2 x
passive probes (1X/10X) | 1 | Nos | - | - |
| 4 | PCB Prototype Machine :
Manual software : Copper CAM & Mach3 Mill.
Resolution (X/Y) : 3.125 micrometre.
Working Area(X/Y/Z) : 200 x 300 x 120 mm.
Minimum width line and space : 0.1 mm (4 mil).
Maximum travel speed : 58 mm/sec(2.28”).
Drilling range: 0.2 – 3.175 mm(8-125 mil).
Maximum drilling cycles : 50 cycles/min
Main axle power rating : 300W.
Main axle rotating speed : 25000 RPM.
Maximum working speed : 3500 mm/min.
Feeding height: 120 mm.
Working drive : 0.02 – 0.05 mm.
Repositioning accuracy : 0.01 – 0.02 mm.
Supported formats : Standard Gerber, DXF, Excellon.
Capability of processing various materials:
FR4, Copper clad, Acrylic, Metal, Aluminium etc.
Power supply : 230V ac | 1 | Nos | - | - |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.24 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.18 MB
BOQ_815023.xls
BOQ • 0.29 MB
2254.pdf
PDF • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .