BUDGETTED

Name of Work :- Construction of Rest House Building at Shahera, Ta.

Shahera, Dist : Panchmahal (Furniture work)

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

1 DOUBLE BED 8.00 Nos 24001.77

Providing & Fixing double bed of Made from 19mm thick BWP Grade

Plywood with Outer Side 4mm thick Vineer Suraface and inside 1mm thick

white backing laminte,Double bed head board with 50mm thick 40 density

cushion bed back which covered with standard fabric, Bed sides and

legboard made from 18mm thick BWP grade plywood with outer side 4mm

thick vineer and inside 1mm thick lamnate. Bed Metress Ply base from

12mm thick BWP Grade Plywood with both side backing lamination and

with support of 2" x 2" clear teak wood wooden battens with malamine

polish. Bed with head and leg panels and all other vineer parts and teak

wood battens are finish with three coat malamine polish . complete as per

drawing given by architect & direction given by Engineer in charge.Bed

Metress size is 1800 x

2 LCD UNIT 10.00 Nos 15036.99

Providing and fixing lcd unit made from 19mm thick BWP plywood with

4mm thick teak finish veener, all the edges are finish with teakwood batten

and finish with malamine polish, Lcd unit having back side panelling and

wall mounting fitting system, Lcd unit having two nos of drawer and one nos

of setup box connection with electric cable duct.Lcd unit border with 38mm

thickness wooden border.Lcd unit wall panel finish with 4m thick veener and

8mm thick MDF cnc cut out panel with PU finish Lcd unitsize is 1200 x 300 x

1200 complete as per drawing given by architect & direction given by

Engineer in charge.

3 WRITING TABLE 8.00 Nos 9859.21

Providing and fixingWriting Table made from 19mm thick BWP plywood

with 4mm thick teak finish veener, all the edges are finish with teakwood

batten and finish with malamine polish,Writing Table having one side

drawer unit with one nos of draer and shutter , Drawer with soft close

channel of standard make , Table having one nos of foot rest.All edges

finish with teak wood batten with malamine polish. Table size is 1200 x

x 750h complete as per drawing given by architect & direction given by

Engineer in charge.

4 Dresser Unit 8.00 Nos 7349.15

supplying & providing Dresser Unitof size 900mm x 450mm x 1950mm Top

and Side Panels are made up of 22mm BWP ply and 0.8 mm HPL laminate

on both sides, All other panels made up of 17mm BWP ply & 1 mm HPL

Laminate on Both Sides, Supplied in Knock Down Condition, Dresser unit

with 4mm clear glass mirror and one side with cupboard. complete as per

drawing given by architect & direction given by Engineer in charge.

5 CENTER TABLE 10.00 Nos 6843.36

Solid wood Center table ,Made from teakwood with chemical treatment,

Wood must be seasoned and passed out from chemical treatment,Center

table with four nos solid wooden legs and table top with 12mm thick clear

toughned glass / 4mm thick veener finish top with 19mm thick BWP

plywood, Table all wooden part finish with malamine polish.Table having

onenos of shelves and properly fixed with wooden legs.Table size is 1050 x

600 x 450h complete as per drawing given by architect & direction given by

Engineer in charge.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

6 CORNER TABLE 8.00 Nos 6386.55

Solid wood Corner table ,Made from teakwood with chemical treatment,

Wood must be seasoned and passed out from chemical treatment,Corner

table with four nos solid wooden legs and table top with 12mm thick clear

toughned glass / 4mm thick veener finish top with 19mm thick BWP

plywood, Table all wooden part finish with malamine polish.Table having

one nos of shelves and properly fixed with wooden legs.Table size is 600 x

600 x 450h complete as per drawing given by architect & direction given by

Engineer in charge.

7 WRITING CHAIR 8.00 Nos 8330.52

Solid wood Writing chair ,Made from teakwood with chemical treatment,

Wood must be seasoned and passed out from chemical treatment,Chair

seat and back finish with 40 density foam and standard fabric, Chair with

wooden finish handel, Chair all wooden part finish with melamine polish,

Chair with standard and premium quality fabric, Chair seat and back with

50mmthick 40 density cushion.complete as per drawing given by architect

& direction given by Engineer in charge.

8 DINNING TABLE 6.00 Nos 28178.38

Solid wood Dinning table ,Made from teakwood with chemical treatment,

Wood must be seasoned and passed out from chemical treatment,, Dinning

table is made from totally solidwood with 18mm thick veener finish plywood

top or with 12mm thick clear modiguard glass, ,25mm thick PVC bufferes

are fitted with the legs,Dinning table finish with malamine polish, Glass top

with SS finish laser with UV fixing Table size is 2100 x 1050 x 750h

complete as per drawing given by architect & direction given by Engineer

9 DINNING CHAIR 36.00 Nos 8330.52

Solid wood Dinning chair ,Made from teakwood with chemical treatment,

Wood must be seasoned and passed out from chemical treatment,Chair

seat finish with 75mm thikcushioncovered with standard and premium

quality fabric, Chair with 25mm thick Pvc buffers , chairs all joint finish with

airadlite lapi, Chair all wooden part finish with malamine polish. complete as

per drawing given by architect & direction given by Engineer in charge.

10 THREE SEATER SOFA SET 6.00 Nos 27958.62

Made From teak wood structure, wood size must be 2” x 2” clear size,

19mm thick MR grade ply will be used for structure, Ply must be used of ISI

Mark, Sofa set cushion must be in 40 density poly urithin material in seat

and back , Poly urithin must be used of ISI mark and with the IS standards

Polyurithin must be joints with the standard gluent and necessary hardware.

Sofa covered with standard tepestry with the cotton base and joints with

double stitching, Sofa cushion as per IS standard and with ISI mark required

On the polyurithin foam, cushion covered with standard tepestry of sanil and

make of sanil as per standards and fabric quality also standard brand . Sofa

seating depth must be 22” from the back, back height must be 21” from

seat in seat 5” polyurithin thickness required and in back 4” polyurithin

thickness required.Base made from SS 304 with mett finish buffing and

6mm thick rubber layer in the base,Recron must be used in back and seat

for the softness.Sofa handel made from plywood box and inside seasoned

wood support,handel covered with 40 density polyurithin and with the layer of recron and covered with standard tapestry.

Size : 72" x 30" x 30" complete as per drawing

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

11 TWO SEATER SOFA SET 9.00 Nos 21515.13

Made From teak wood structure, wood size must be 2” x 2” clear size,

19mm thick MR grade ply will be used for structure, Ply must be used of ISI

Mark, Sofa set cushion must be in 40 density poly urithin material in seat

and back , Poly urithin must be used of ISI mark and with the IS standards

Polyurithin must be joints with the standard gluent and necessary hardware.

Sofa covered with standard tepestry with the cotton base and joints with

double stitching, Sofa cushion as per IS standard and with ISI mark required

On the polyurithin foam, cushion covered with standard tepestry of sanil and

make of sanil as per standards and fabric quality also standard brand . Sofa

seating depth must be 22” from the back, back height must be 21” from

seat in seat 5” polyurithin thickness required and in back 4” polyurithin

thickness required.Base made from SS 304 with mett finish buffing and

6mm thick rubber layer in the base,Recron must be used in back and seat

for the softness.Sofa handel made from plywood box and inside seasoned

wood support,handel covered with 40 density polyurithin and with the layer of recron and covered with standard tapestry.

Size : 54" x 30" x 30". complete as per drawing given by architect & direction given by Engineer in charge.

12 ONE SEATER SOFA SET 10.00 Nos 18084.24

Made From teak wood structure, wood size must be 2” x 2” clear size,

19mm thick MR grade ply will be used for structure, Ply must be used of ISI

Mark, Sofa set cushion must be in 40 density poly urithin material in seat

and back , Poly urithin must be used of ISI mark and with the IS standards

Polyurithin must be joints with the standard gluent and necessary hardware.

Sofa covered with standard tepestry with the cotton base and joints with

double stitching, Sofa cushion as per IS standard and with ISI mark required

On the polyurithin foam, cushion covered with standard tepestry of sanil and

make of sanil as per standards and fabric quality also standard brand . Sofa

seating depth must be 22” from the back, back height must be 21” from

seat in seat 5” polyurithin thickness required and in back 4” polyurithin

thickness required.Base made from SS 304 with mett finish buffing and

6mm thick rubber layer in the base,Recron must be used in back and seat

for the softness.Sofa handel made from plywood box and inside seasoned

wood support,handel covered with 40 density polyurithin and with the layer of recron and covered with standard tapestry.

Size : 36" x 30" x 30". complete as per drawing given by architect & direction given by Engineer in charge.

13 MDF CNC CUTTING PANELLING 18.00 Smt 6328.05

The works include supply and installation of MDF CNC cutting panelling

made with 19mm thick plywood framing with 12mm thick exterior grade MDf

sheet. Work includes with making cnc design in MDF sheet with necessery

paint finish complete as directed by architect and engineer in charge.

14 WALL PAPER PANELLING 120.00 Smt 2020.00

Providing and Applying Imported Decorative Wall paper of apporved make

with making wall smooth and free from mortar and with fixing wall paper in

line and level using wall paper of approximate 200 Rs per sqft with

necessary adhesive materials etc. complete or as directed.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

15 WOODEN PANELLING WITH PAINT FINISH MDF SHEET 48.00 Smt 4040.00

Providing and fixing wooden panelling made from 12mm thick plywood with

12mm thick exterior grade MDF sheet ,Panelling strcture made from

50mmx 25mm 1.2mm thick anodized aluminium pipe with 12mm thick

exterior grade water proof mineral ibre board sheet with matt finish PU

paint.Panelling with required necessery grooves and designs on it.Work

includes with required allnecessery hardware and material. Complete as

directed by architect and engineer in charge.

16 DOUBLEBED FOAM METRESS 18.00 Nos 15949.65

Metress made from Bonded foam with softy sandwich layer, Foam metress

made from standard quality bonded foam of 100mm thick with 50 mm thick

softy foam which is from standard make, Both foam are fix with standard

glue with both side kwilted cotton fabric cover, Bed all edges are stitch with

pipeing finish with standard finishing, Cotton kwilt of Dark colour decorative

Metress Size : 78" x 6" x 72"

17 LOUNGE CHAIR 16.00 Nos 11704.87

Made From teak wood structure, wood size must be 2” x 2” clear size,

19mm thick MR grade ply will be used for structure, Ply must be used of ISI

Mark, Sofa set cushion must be in 40 density poly urithin material in seat

and back , Poly urithin must be used of ISI mark and with the IS standards

Polyurithin must be joints with the standard gluent and necessary hardware.

Sofa covered with standard tepestry with the cotton base and joints with

double stitching, Sofa cushion as per IS standard and with ISI mark required

On the polyurithin foam, cushion covered with standard tepestry of sanil and

make of sanil as per standards and fabric quality also standard brand . Sofa

seating depth must be 22” from the back, back height must be 21” from

seat in seat 5” polyurithin thickness required and in back 4” polyurithin

thickness required.Base made from SS 304 with mett finish buffing and

6mm thick rubber layer in the base,Recron must be used in back and seat

for the softness.Sofa handel made from plywood box and inside seasoned

wood support,handel covered with 40 density polyurithin and with the layer of recron and covered with standard tapestry.

Size : 33" x 30" x 30" complete as per drawing given by architect & direction given by Engineer in charge.

18 CUPBOARD 58.00 Smt 15904.37

Cupboard made from 18mmm thick MR grade plywood board ,With all the

edges will finish with 2mm thick edge beading with hot melt glue and

beading will finish properly with throughfeed edge beading machine,Inside

cupboard required one drawer and self ,Drawer with standard locking

system and working on standard chaneel with SS finish handel,Inside

cuoboard required one oblam pipe hanging rode with necessery hardware

system,Cupboard fixed with KD fitting system and all the area will finish with

laminate,Cupboard made from 18mm thick grade plywood board and all the

hardware required of standard quality,Door are hinged on hinges with

necessery hardware,Doors required standard stopper and laminate finish

base,Cupboard with adjustable self system required and with necessery

hardware and fixing,Cupboard with standard locking system,Cupboard with

also dresser unit and with 4mm thick modiguard and saintgobinmake mirror

fixing with necessery hardware.

19 WALL PANELING WITH VINEER & WALL PAPER 24.00 Smt 4928.71

Providing & fixing Wooden wall panelling using 12 mm thick plywood fixed

on panels made from 50 x 25 mm teak wood battens. The plywood is

covered with decorative Wall paper @ Rs.100 / sq ft & decorative Veneer @

Rs 100 /sqft. all veneered surfaces finished with melamine polish remaining

all details as directed by consultant

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

20 FRAMING CUPBOARD FOR KITCHEN & BASIN UNIT 7.00 Smt 9691.88

Providing & fixing Storage unit with all carcass and shutter panels made of

17 mm BWP plywood and 0.8 mm HPL laminate on bath sides. Expose

edge beding tap having 0.8 mm and 1.5 mm thickness and supply in knock

down condition etc. complete as per drawings given by architect and

direction given by Engineer in charge.

21 BED SIDE TABLE 16.00 Nos 7743.37

Bed Side tabe made from 18mm thick MR grade plywood with 1mm thick

laminate inside with outer side 4mm thick premium Veneer sheet. Side table

with one nos of drawer unit, Drawer sliding on teleschopic channel with SS

fiish handel.Side table made from 18mm thick MR grade plywood with 4mm

thick Veneer.All the edges of plywood will finish with 4mm thick wooden

border patti with PU paint and malamine polish or with 2mm thick PVC edge

beading. Bed side table made in knock down condition with KD fitting

system.All the veener part and wooden border surfaces finish with

malamine polish.

Side unit Size : 18" x 15" x 18".complete as per drawing given by architect

& direction given by Engineer in charge.

22 Luggage Rack 10.00 Nos 18784.42

supplying & providing participant luggage rack of size 900mm x500mm x

675mm Top and Side Panels are made up of 22mm BWP ply and 0.8 mm

HPL laminate on both sides, All other panels made up of 17mm BWP ply &

1 mm HPL Laminate on Both Sides, Supplied in Knock Down Condition, SS

square rod for supporting Luggage etc. complete as per drawing given by

architect & direction given by Engineer in charge.

23 Puffy Made From teak wood structure, wood size must be 2” x 2” clear 2.00 Nos 3786.49

size, 19mm thick MR grade ply will be used for structure, Ply must be used

of ISI Mark, Sofa set cushion must be in 40 density poly urithin material in

seat and back , Poly urithin must be used of ISI mark and with the IS

standards Polyurithin must be joints with the standard gluent and necessary

hardware. Sofa covered with standard tepestry with the cotton base and

joints with double stitching, Sofa cushion as per IS standard and with ISI

mark required On the polyurithin foam, cushion covered with standard

tepestry of sanil and make of sanil as per standards and fabric quality also

standard brand . Sofa seating depth must be 22” from the back, back height

must be 21” from seat in seat 5” polyurithin thickness required and in back

4” polyurithin thickness required.Base made from SS 304 with mett finish

buffing and 6mm thick rubber layer in the base,Recron must be used in

back and seat for the softness.Sofa handel made from plywood box and

inside seasoned wood support,handel covered with 40 density polyurithin and

24 OFFICE TABLE WITH VINEER FINISH WORKTOP 1.00 Nos 21956.55

Executive office table made from 19mm thick plywood , Table top made

from 19mm thick BWP plywood with 4mm thick veneer with malamine

polish finish. Table with required necessery storage.Table having standard

locking system storage, Keyboard trey and drawer pedestal, Table with

front side decorative panel.complete as per drawing given by architect &

direction given by Engineer in charge.

SIZE : 1800 X 750 X

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

25 GYPSUM BOARD FALSE CEILING 918.00 Smt 710.97

Pro. And fixing single layer water proof gypsum board 12.5 mmthick

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel of size 18 mm x 40 mm x 0.8 mm at 1220 mm center

to center ceiling section of size 42 mm x 38 mm x 0.55 mm at 457 mm c/c

and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at

edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt

connecting cleat,joining compound top coat on ceiling incl.making

necy.opening for light fitting,diffuser etc. comp. as per detail drawing as

26 CHARCOAL,WOODEN BATTEN AND MIRROR FINISH PANELLING 24.00 Smt 11259.77

Providing and fixing wooden finish panelling with under strcture of 50mm x

25mmthick Aluminium pipe with 12mm thick plywood with 4mm thick

Premium grade and mlamine coated charcol sheet of dual shade with

25mm x 25mm thick Ghana teak wood battens with premium shade polish

and with 4mm thick Bronge finish mirror with beavaled edges , Panelling

finish with appropriate grooves cuttings and design of fixing, Chrcol sheet

fixed with heavy quality and premium rade pro bond gluewith proper fixing

complete as directed by architect and engineer in charge.

27 Texure Paint 90.00 Smt 1291.20

Texture paint (Insider and outside) :Wall/ Ceiling painting two coats (1 base

plus 1 texture) with low VOC as per approved brand in any shades and

colour as directed on wall surface to give an even shade including applying

coat of putty, Penetrating primer or equivalent and two coats of paint,

scaffolding to at any height with all labour and material thoroughly brushing

the surface free from mortar droppings and other foreign matter and sand

prepared smooth etc. complete. The substrate must be sound, clean, dry,

free from dust, oil, grease and laitance etc. All traces of release agents must

be removed. On chalky and dusty surfaces, all loose material must be

removed by stiff bristle brushing. The primer/ paint application is to be done

with the rollers. Rate shall be including crack filling and levelling as per

manufacturers specfication. Top coat should have. 1) Low VOC content. 2)

Crack Bridging ability upto 2.6 mm. 3) 100% pure acrylic emulsion. 4) Anti-

Carbonation concrete protection. 5) Very Low Flame spread. 6) Superior

28 MARBLE FINSIH DINNING TABLE WITH WOODEN FINISH BASE 2.00 Nos 14360.23

Providing and fixing wooden finish dinning table made from 35mm thick

wooden strcture with top finish with 30mm thickness Quartz stone, Table

with matt finish PU polish , Table top with 19mm thick Commercial plywood

with 30mm thick Quartz stone with chamfered edges, Quartz edges required

with bullnose finish and polish with shinning complete.All works include with

complete installation.As directed by architect and engineer in charge.Table

Size : 1.20 x 1.20 x

29 AMERICAN PLATE CURTAIN WITH PREMIUM FABRIC 28.00 Smt 2120.88

Providing and fixing Americal plate curtain with premium brand fabric,

Curtain with Blackout aster on back side with and standard stitching with

matching threads, Curtain work inclodes back side premium belt for

Keeping curtain channels clip.Curtain with Premium Quality brand fabrics

complete.Curtain with M-100 Profile which is of extruded Aluminium

Alloy.Curtain M -100 Aluminium track profile install with center adjustable

brackets and with required necessery hardware.Complete as directed by

Architect and engineer in charge.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

30 AMERICAN PLATE CURTAIN WITH PREMIUM SHEERS 28.00 Smt 2334.49

Providing and fixing Americal plate curtain with premium brand Sheers,

Sheers with plates and standard stitching with matching threads, Sheers are

sliding on Aluminium alloy tracks with premium rollers, Premium Quality

brand Sheers complete.Sheers are sliding on Aluminium Powdercoated

Tracks with Center InstallationC Brackets and with required necessery

hardware.Complete as directed by Architect and engineer in charge.

31 WOODEN PANELLING WITH PAINT FINISH MDF SHEET 12.00 Smt 5133.15

Providing and fixing wooden panelling made from 12mm thick plywood with

12mm thick exterior grade MDF sheet ,Panelling strcture made from

50mmx 25mm 1.2mm thick anodized aluminium pipe with 12mm thick

exterior grade water proof mineral ibre board sheet with matt finish PU

paint.Panelling with required necessery grooves and designs on it.Work

includes with required allnecessery hardware and material. Complete as

directed by architect and engineer in charge.

32 WOODEN FIX VISITOR CHAIR 24.00 Nos 8319.53

Solid wood Fix visitor chair ,Made from teakwood with chemical treatment,

Wood must be seasoned and passed out from chemical treatment,Chair

seat and back finish with 40 density foam and standard fabric, Chair with

wooden finish handel, Chair all wooden part finish with melamine polish,

Chair with standard and premium quality fabric, Chair seat and back with

50mmthick 40 density cushion.complete as per drawing given by architect

& direction given by Engineer in charge.

33 MEDIUMBACK REVOLVING CHAIR 28.00 Nos 2777.50

Providing and fixing medium back revolving chair,Chair with five nos metal

prong stand with Hydraulic gas lift system, Chair with seat and back

moulded cushion, Chair withPush back mechanisum, Chair with chrome

finish handle,Complete as directed by engineer-in charge.Size : max.Height

1070mm, Min.970mm,Seat: 490mm x 510 mm,Back : 640 mm x 510 mm

34 PREMIUM HIGHBACK REVOLVING CHAIR 5.00 Nos 9999.00

Providing and fixing High Back chairs made of 1" ERW pipe of 16 gauge

seat and back is made of 12 mm hot press single ply and provided with

40/50 & 23 density 12 mm pure foam (Feather foam make) and covered

with premium quality of leather/fabric. The chair with duo colour fabric

combinations as per EIC / Architect. The chair shall be provided with

120mm BIFMA Passed gas lift and conventional tilt mechanism with one

lever control for lock and seat height adjustment. Plate thickness shall

mm and angle is 3~18 (BIFM Passed) with poly urethane one pipe handle

and nylon base having 1359 kg weight capacity as per BIFM standard.all

the metal parts of the chair are pre treated prior to powder

coating/chrome.size 675X675X1165mm . seat ht: 440/540mm.

35 METAL STOREWELL CUPBOARD 1.00 Nos 6888.20

Providing , fixing and Arranging Metal Storewell cupboard made from MS

CRCA 22 Guage sheet. Cupboard with four nos of partition and five

compartment.Cupboard all metal part must be required of Powdercoated

completely, Cupboard with tower bolt threeway locking system, Complete as

directed by Engineer in Charge. size -916mm x 486mm x 1980mm (H)

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

36 ROMAN BLINDS 22.00 Sqm 3369.48

Providing and fixing roman blind curtain with standard ake and premium

quality fabric with black out astar fusing.Blinds install with standard

powdercoated clamp.Blinds with stanadard working chain

mechanisum.Blind with velcrow fitting track.Curtain with stanard aluminium

powder coated channel with premium quality mechanisum.complete as per

drawing given by architect & direction given by Engineer in charge.

37 CONFERENCE TABLE 12.00 Sqm 8355.90

Providing and fixing Conference table made from 38mm thick BWP

Plywood with 1mm thick laminate table top with 38mm thickness korian

finish joint less work top with properglossy buffing.Table understructure

made with 19mm thick BEP plywood with 1mm thick premium laminate

sheet.All laminate finish plywood edges covered with teakwood borders with

malamine polish.Table with cable raceway and in top with pop up box

complete as directed by architect and engineer inn charge.

38 Providing and fixing wall piece on wall complete as directed by architect and 20.00 Nos 2020.00

engineer in charge.

39 Providing and fixing clock on wall complete as directed by architect and 12.00 Nos 1010.00

engineer in charge.

40 Providing and fixing artifact on wall complete as directed by architect and 20.00 Nos 4040.00

engineer in charge.

Rs. Sixty Lakh Forty Eight Thousand Ninety Two and Twenty Five Paisa Only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. The Contractor will have to submit the mix design for different grades of cement concrete at his own cost before

execution as directed and to be approved from the Engineer in charge.

6. Dismantalled materials of amount of Rs. 0.00 must be recovered from 1st R.A. bill of Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Executive Engineer

R & B Division,