REPAIRS / REPLACEMENT TO ROLLING SHUTTERS, STEEL DOOR AND REPLACEMENT OF GLASS PANES, SERVICING AND GREASING IN VARIOUS BLDGS AND REPAIR TO TOILET IN TECH AREA AT AFS PHALODI

Amount

Taking up or down 15 mm bore steel tubing and connections or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections or removal to store complete all as specified and directed.

S&F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F in repair Health faucet(ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repairs PVC flexible waste pipe, 32 mm dia of length 750mm, suitable for WHBs/urinals/sink complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550 x 400 mm on and including new brackets complete including screwed for iron pipe 32mm size brass chromium plated waste coupling complete all as specified and directed.

S&F in repairs ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed. (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs ball valves suitable for 25 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed. (minimum weight 455 gms) complete all as specified and directed.

Dismantling of water tank exc 250 litres & n. exc 500 litres capacity complete all as specified and directed.

Dismantling of water tank exc 500 litres & n. exc 1000 litres capacity complete all as specified and directed.

S&F rotational moulded polythylene 500 litres capacity liters water storage tanks tripple layer (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR Part -I complete all as specified and directed.

S&F rotational moulded polythylene 1000 capacity liters water storage tanks tripple layer (cylindrical verical with closed top ) hoisted and fixed in position all as specified in SSR Part -I complete all as specified and directed.

S&F in repair PVC water tank cover with fittings , suitable for tanks of capacity for tank 500 ltr to 1000 liter including hinging device complete all as specified and directed.

S&F in repairs plastic water closet seat cover, white coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed.

S&F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed.

M&L for cleaning and removing all scale and dirt , etc from tank of capacity exc 250 & n. exc 500 any type including cleaning using bleanching powder or any other tank cleaning agent and mouths of circulating pipes etc complete all as specified and directed.

M&L for cleaning and removing all scale and dirt , etc from tank of capacity exc 500 & n. exc 1000 any type including cleaning using bleanching powder or any other tank cleaning agent and mouths of circulating pipes etc complete all as specified and directed.

S&F in repairs towel ring of PTMT fixed with and including chromium pated brass screws and wooden/plastic cleats (min weight 90 gms) complete all as specified and directed.

S&F in repairs bib taps, brass chromium plated, fancy type, screwed down, screwed suitable for 15 mm iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs brass CP pillar taps, 15 mm, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs brass CP swan neck pillar taps, 15 mm, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair chromium plated angle valve cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe 15mm bore complete all as specified and directed.

S&F in repair chromium plated stop cock cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe 15mm bore complete all as specified and directed.

S&F in repair for shower arm of 15mm bore, 195 mm long with bend of 45 degree with flange of PTMT of any colour and fixed complete all as specified and directed.

S&F in repair chromium plated shower rose with or without swivel joints including fixing to steel pipe of 125 mm size complete all as specified and directed.

S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L in repair for 150mm bore HDPE pipe confirming to IS 16098 fusing twin layers with inner surface smooth and outer surface corrugated, stiffness class SN4 (length 6 mtrs) alongwith necessary fittings such as tees, bends, sockets and leak proof jointing materials etc and laid & jointed complete with collars complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore fixed complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore fixed complete all as specified and directed.

S&F PVC (SWR) branch piece, single Y equal or unequal 75 mm bore complete all as specified and directed.

S&F PVC (SWR) branch piece, single Y equal or unequal 110 mm bore complete all as specified and directed.

S&F in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of lime concrete complete all as specified and directed.

S&F in repairs, Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repair Stainless steel gratings with or without 100mm bore size fixed with white cement, complete all as specified and directed.

S&F in repair PVC (SWR) 75mm bore floor trap/nahani trap, plain with grating including jointing with solvent cement fixed complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement etc complete all as specified and as directed.

S&F in repair waste coupling of PTMT of bore dia 40mm (half or full threaded) ( Minimum weight 32mm-45 gms/40mm-60gms) complete all as specified and as directed.

S&F in repair waste coupling of PTMT of bore dia 32mm (half or full threaded) ( Minimum weight 32mm-45 gms/40mm-60gms) complete all as specified and as directed.

Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and precast concrete articles complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks built in CM (1:6) type C-1(1:3:6) (20 mm graded stone aggregate) exc. 10 cm in width and setting in mortar complete all as specified and directed.

Demolition of cement concrete unreinforced of any type any level and at any position complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM (1:4) mixed with water proofing compound complete all as specified and directed. Note : WPC shall be measured and paid sapertaly.

M&L for applying two coats of water proofing coating by using water proofing chemical mixed in chemical water and cement ratio as per manufacturer's instructions both on floor as well as on walls of sunken complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken portion complete all as specified and directed.

S&F PVC (SWR) 75 mm dia with single socketed in any length fixed to walls with rubber ring joints fixed including dismantling of old pipe complete all as specified and directed.

S&F PVC (SWR) 110 mm dia with single socketed in any length fixed to walls with rubber ring joints fixed including dismantling of old pipe complete all as specified and directed.

M&L hard core of guage not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone & boulders complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection etc, finished even & smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand (1:3) by weight complete all as specified and directed. Note : The concrete shall be laid at a stretch n. exc 1.5m in length and every turning corners.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate ) as in floor finishes and leveling course complete all as specified and directed.

M&L for joint free (edge cut) white Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm/450mm x 350mm, 7mm thick over and including 10 mm thick rendering in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid joint free (edge cut) coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cement mortor (1:6) for laying floor finishes complete all as specified and as directed.

S&F in repairs vitreous China urinals, flat back, size of 465x355x265mm white(minimum),bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and as directed.

Taking down cement plaster on brick or stone wall surfaces etc., including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces including finishing plaster surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on ceiling plaster in CM (1:3) and finished even & smooth without using extra cement complete all as specified and directed.

M&L for two coats of white wash to undecorated ceiling surfaces, cornices, pilasters etc including preparation of new surfaces complete all as specified and directed .

M&L for two coats of white wash on walls including preparation of new surfaces complete all as specified and directed .

M&L for preparing old plastered surfaces of walls and applying one coat of oil bound distemper etc complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of primer on walls complete all as specified and directed.

S&F in repairs soap dish, viterous China white approximate size 160x160x90mm embedded in the wall complete all as specified and directed.

S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass, shelf 120mm wide with chromium plated bracket guard and railing 600mm long fixed to wall with sleeves and screws complete all as specified and directed.

S&F in repairs towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

Taking down shutters of any description, area exc 1.00 sqm but not exc 2.00 sqm each and refixing in the same opening after cutting, easing and adjustment complete all as specfied and directed.

Resecuring or easing and adjusting door shutters, area exc 1 sq m and not exc 2.00 sq m each of any description without taking down shutter from frame complete all as specfied and directed.

Taking down shutters of any description area exc 1.00 sqm but not exc 2.00 sqm each and removing from site complete all as specfied and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4.00 sqm each complete all as specified and directed.

Taking down shutters of any description area not exc 1.00 sqm each and removing from site complete all as specfied and directed.

S&F Fiber Glass Reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions complete all as specfied and directed.

S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions complete all as specfied and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specfied and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specfied and directed. Note: Cost of Stainless steel butt hinges and necessary S S screws deemed to be included in unit quoted rate.

S&F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium door shutters, with aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 150 mm long handles 2 Nos and 150 mm long tower bolts 2 Nos in each door shutter, 100 mm long hinges 3 Nos in each door shutter,anodised aluminum snap beading screws etc. complete all as specfied and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets and snap grid complete all as specified and directed.

M&L for anodised aluminium snap grid 605x605mm frame work for false ceiling using main tee of size 25x35x1.50mm & cross tee of size 25x35x1.50mm, aluminium anodized angle section 25x25x1.50mm complete all as specified and directed.

S&F supported hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to RCC roof slabs/iron truss by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc complete all as specified and directed.

S&F PVC insulation panels 10 mm thick with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed.

M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for cutting holes in brick walls exceding one brick wall but n.exc two brick wall, built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair stainles steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with stainless steel wire staples, fixed to aluminium window sliding/fixed type or wooden door /window including rubber bead joining cleat for fixing in postion complete all as specified and directed.

S&F in repair sink with drainage board made of stainles steel 1mm thick kitchen/laboratories with plug washer and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall 915 mm x460 mm and bowl size 410 mm x330 mm x 160 mm complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handle, (ISI marked) fabricated type anodised fixed complete all as specfied and directed.

S&F in repairs 150 mm size extruded aluminium alloy handle, (ISI marked) fabricated type anodised fixed complete all as specfied and directed.

S&F 100mm long mild steel butt hinges medium weight fixed to chowkhat complete all as specified and directed.

S&F in repair 100mm long mild steel butt hinges medium weight fixed to chowkhat complete all as specified and directed.

S&F in repair 150 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section fixed complete all as specfied and directed.

S&F 150 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section fixed complete all as specfied and directed.

S&F in repair 300mm mild steel (Helical door spring) ordinary rat tail rod pattrern spring including roller and roller plate complete with necessary welding work complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt (ISI marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specfied and directed.

S&F in repairs 300 mm long aluminium alloy, anodised, sliding door bolt (ISI marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specfied and directed.

S&F in repairs floor door stopper 140 mm cover plate of aluminium alloy body , double leg type with hard rubber shoe fixed to door complete all as specfied and directed.

S&F floor door stopper 140 mm cover plate of aluminium alloy body , double leg type with hard rubber shoe fixed to door complete all as specfied and directed.

S&F in repairs door closer hydraucally regulated, cast iron body designation No. 2 universal type, suitable for door shutters up to 701 to 850 mm in width and of weight not more than 36 to 60 kg and fixed complete all as specfied and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specfied and directed.

S&F in repairs 18 mm to 20 mm dia curtain rod/rail, anodised aluminium alloy, chromium plated with & including fixing brackets, stops etc complete all as specified and directed.

S&F second class hard wood fillet, wrought, cross sectional area exceeding 3 sqcm but n.exc 6 sqcm fixed with nails complete all as specfied and directed.

S&F in repairs second class hard wood fillet, wrought, cross sectional area exceeding 3 sqcm but n.exc 6 sqcm fixed with nails complete all as specfied and directed.

M&L for welding in repairs to any description of metal exc 2.5cm but n exc 5cm in length and thickness of welded not exc 6 mmcomplete all as specfied and directed.

S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood glazed & skelton shutters (factory made) open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and rabated sash bars any number, edges of framing plain chamfered or rounded fitted with cut mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I Section- 8 clause 8.24 (a) and fitted to frames/chowkats as in door shutters. (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

Hacking out old broken glass (any thickness) and size from metal frame glazed with putty and removal of debris to a distance n.exc 100 mtr and depositing where directed complete all as specfied and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specfied and directed.

S&F for 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specfied and directed. Note :- The work will be executed upto G+3 storey Bldg.

S&F 12mm thick gypsum board/tiles for insulation and acoustic purpose of size 600mmx600mm fixed with screws with staple on snap grid as per manufacturers instructions complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site complete all as specifed and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame including PVC fillet & PVC strips complete all as specifed complete all as specified and directed.

S&F special insulated triple layer glass consisting of combination of 6mm clear toughened and laminated glass made of 6 mm thick tinted toughened glass and 3 mm thick coloured (film) and 12mm thick air gap for insulation, fixed with silicon sealant all around in shape of frame and including dismantling/hacking out of old damaged glass and removal of unserviceable glass, complete all as specified and directed. Note: (i) The tentative size and shape of glass as per site are as under:- (a) 1315/1475x1650mm trapezoidal shape (b) 1165/1295x1660mm trapezoidal shape (c) 1270/1935x1670mm trapezoidal shape (d) 1405/1520x1660mm trapezoidal shape (e) 1345/1445x16700mm trapezoidal shape (f) 1055/1085x1630mm trapezoidal shape (g) 1025x1600mm Rectangle shape (h) 945/1055x1575mm trapezoidal shape (j) 1285x1665mm Rectangle shape (k) 1285x1665mm Rectangle shape (ii) This sizes are tentative, the exact size and shape with inner or outer faces etc shall be measured at site for the correct size & Position of glass so that correct fitment of glass as per sie requirement can be met out". (iii) These glasses are required to be replaced for ATC Tower which is on more than 12 Mtr height and working spaces in narrow widths. The assessment for fixing arrangement shall required special T&P Ladders etc. the quoted artes shall be inclusive of the all these arrangements/aspects (iv) The contractor shall quote his rate in per square metre of triple layer glass as specifie in description of item.

Dismantling wrought iron or mild steel work of anydescription by cutting or without damage of structure not otherwise provided complete all as specified and directed.

S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for greasing and easing of rolling shutter of size not exc 15 Sqm alongwith the guide channel, helical spring, anchoring and all other as to work the shutter in easy way and complete all as specified and directed.

M&L for greasing and easing of steel door with channel moving wheels as to work with easy movement complete all as specified and directed.

Taking down existing steel rolling shutters area n. exc 15 Sqm with all connecting items and repairs/ replace the lath of steel rolling shutters and locking arrangements, greasing, tightening of helical wire spring including welding wherever required, oiling, etc complete and make in serviceable condition and applying two coats of synthetic enamel paint including preparation of old painted surfaces and refixing in the same opening complete all as specified and directed. Notes :- (i) Lath of steel rolling shutters, lock plate with locking arrangement and shall be measured and paid for separately. (ii) Rate of spring deemed to included in the unit quoted rate. (iii) Unserviceable items shall be measured and paid separately as supply only under respective items.

Taking down existing steel rolling shutters area n. exc 15 Sqm complete all as specified and directed.

S&F 1.25mm thick Steel rolling shutters, without ball bearing, as specified incluiding top cover, anchring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type complete all as specified and directed.

Supply only Ball bearings for rolling shutters complete all as specified and directed.

Supply only Saftey lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Supply only laths for rolling shutters (thickness of lath 1.25 mm) complete all as specified and directed.

Supply only mild steel 0.45m long rolling shutter helical spring of wire dia 7mm complete all as specified and directed.

S&F prefabricated lock plate length not less than 2.00 mtr but n. exc 4.00 mtr and width not less than 0.15 m but not exc 0.20m of riveted construction made out of mild steel sheet 3.15 mm thick ,reinforced with mild steel angle 35 x 35 x 5 mm size at bottom and locking arrangement with two 50 mm bow handles and flat iron 25 x 3 mm to fix the lath and lock plate complete all as specified and directed.

S&F guide channel, made out of 2.00 mm thick MS sheet size 75 x 30 mm including taking down the existing guide channel from rolling shutters and fixing with wall / column etc and making good with (1:2:4) PCC and cement work (1:3) and two coats of synthetic enamel paint on over a coat of red oxide primer complete all as specified and directed.

S&F 2 mm thick MS sheet hood cover for rolling shutters to accommodate the spring and lath when rolling shutter open including two coats of synthetic enamal paint over a coat of red oxide primer including taking down the existing cover complete all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down existing steel door shutters/channel gate/iron gate area n. exc 15 Sqm with all connecting items and repairs/ replace the MS plate and angle of steel door shutters and locking arrangements, greasing, tightening of nut bolt and hinge including welding wherever required, oiling, etc complete and make in serviceable condition and applying two coats of synthetic enamel paint including preparation of old painted surfaces and refixing in the same opening complete all as specified and directed. NOTES :- (i) MS plate angle for frame steel shutters, shall be measured and paid for separately as supply only.

Supply only Mild steel in flat, round or square bars in available lengths to Fe 410-W (Gde- E250) quality 'A' complete all as specified and directed.

M/S SOLANKI GENERAL SUPPLIERS (BID ID -3353804)

KRISHNA CONSTRUCTION COMPANY (BID ID -3343676)

M/S BHERA RAM & SONS (BID ID -3345605)