BEAUTIFICATION WORK SUCH AS FOOTPATHS, PLANTATION, GARDEN, OPEN GYM AREA,ETC. FOR GHB ROAD IN THE MORBI MUNICIPAL CORPORATION AREA. ( 2ND ATTEMPT)

TOTAL AMOUNT ₹86,319.00

TOTAL AMOUNT ₹46,113.57

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead & lift.(A)

Loose or soft soil

Rolling and consolidation using vibratory road roller 8 -

10 tonne capacity (incl. watering)(A) Earth work (layer

not exceeding 200mm thickness)

Supply & Laying of Black Trap Metal / Rubble

Providing and laying cement concrete 1:3:6 (1-Cement :

3- coarse sand : 6- hand broken stone aggregates

8 mmnominal size) and curing complete excluding cost of CuM 118 ₹3,064.60 ₹361,622.80

formwork in (A) Foundation and Plinth

Providing, supplying and laying natural granite cobble

stones of 60 mm thickness of approved colour and

quality, machine cut or hand dressed to approximate

size 90 × 90 mm / 100 × 100 mm or equivalent

approved size, with rough / flamed top surface and

neatly dressed edges, laid over 20–25 mm thick cement

mortar bed (1:4) on prepared base, including proper

9 alignment, leveling, maintaining uniform joints of 10–15 SqM 1077.00 ₹ 2,392.00 ₹2,576,184.00

mm, filling joints with cement mortar / stone dust

slurry, necessary cutting to edges and curves where

required, compacting, curing, cleaning and finishing of

surface, complete with all materials, labour, tools and

tackles required for proper installation, complete in all

respects as directed by Engineer-in-Charge.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

10 design and including excavation for fixing in proper line Rmt 769 ₹396.90 ₹305,216.10

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

Double coat enemal paint with primer coat

COMPACTED RED EARTH PATHWAY

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead & lift.(A)

Loose or soft soil

Rolling and consolidation using vibratory road roller 8 -

10 tonne capacity (incl. watering)(A) Earth work (layer

not exceeding 200mm thickness)

Construction of granular sub-base by providing close

graded material, spreading in uniform layers with motor

grader on prepared surface, mixing by mix in place

14 method with rotavator at OMC and compacting with CuM 74 ₹586.00 ₹43,364.00

vibratory roller to achieve the

desired density complete (Grade-III)

Supplying, laying and fixing non-woven polypropylene

geotextile fabric of minimum 150–200 GSM beneath

red soil/murum pathway over prepared GSB surface,

including surface cleaning, proper overlapping

15 (minimum 300 mm at joints), anchoring with U- SqM 490 ₹75.00 ₹36,750.00

pins/staples, trimming, protection during subsequent

layer placement and complete as per specifications and

engineer’s direction

Providing and laying Red Soil + Lime stabilised flooring

for pedestrian pathway, comprising approved red soil

free from organic matter, mixed with hydrated lime @

5–7% by weight, laid over prepared base, including

thorough mixing of materials, spreading, levelling and

finishing the surface true to line, level and required

slope, complete as directed by Engineer-in-Charge

Supplying and applying eco-friendly organic soil

stabilizer / natural polymer binder (lignin-based /

enzyme-based / plant-derived), non-toxic, non-

cementitious and water soluble, conforming to ASTM

D4609 / IRC SP-89 guidelines, compatible with red soil /

17 murum, applied by dilution in potable water and mixed SqM 420 ₹300.00 ₹126,000.00

uniformly with top 75–100 mm soil layer, improving

CBR, cohesion and erosion resistance, reducing dust

and surface ravelling, executed as per manufacturer’s

specifications including curing, complete as directed by

Engineer-in-Charge

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead & lift.(A)

Loose or soft soil

Rolling and consolidation using vibratory road roller 8 -

10 tonne capacity (incl. watering)(A) Earth work (layer

not exceeding 200mm thickness)

Construction of granular sub-base by providing close

graded material, spreading in uniform layers with motor

grader on prepared surface, mixing by mix in place

20 method with rotavator at OMC and compacting with CuM 7 ₹688.00 ₹4,816.00

vibratory roller to achieve the

desired density complete (Grade-II)

Providing and laying non-woven geotextile fabric, made

of polypropylene/polyester, of approved make &

GSM (as specified), laid over prepared surface as

separation and filtration layer below gravel / sand / GSB

21 / paving works, including surface cleaning, proper SqM 41 ₹80.40 ₹3,296.40

alignment, overlapping of joints minimum 300 mm,

cutting, anchoring with pins or overlaps, and making the

surface wrinkle-free, complete as directed by Engineer-

Providing and laying stone dust / quarry fines binding

layer (compacted thickness 30 MM), using approved

crusher dust / quarry fines free from organic matter,

22 laid over prepared surface, including spreading to SqM 41 ₹258.00 ₹10,578.00

required thickness, manual levelling, dressing of surface

true to line and level, complete as directed by Engineer-

Providing and laying gravel wearing course of

compacted thickness 50 mm, using approved crushed

stone gravel (khadi) of size 6–12 mm, angular in shape,

clean and free from dust, clay and organic matter, laid

over prepared surface, including spreading to required

thickness, manual levelling, dressing of surface true to

line and level, complete as directed by Engineer-in-

TOTAL AMOUNT ₹3,820,992.90

TOTAL AMOUNT ₹3,820,992.90

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead & lift.(A)

Loose or soft soil

Rolling and consolidation using vibratory road roller 8 -

10 tonne capacity (incl. watering)(A) Earth work (layer

not exceeding 200mm thickness)

Providing and laying cement concrete 1:3:6 (1-Cement :

3- coarse sand : 6- hand broken stone aggregates

26 mmnominal size) and curing complete excluding cost of CuM 37 ₹3,064.60 ₹113,390.20

formwork in (A) Foundation and Plinth

Providing and applying acrylic hard court sports flooring

system over prepared RCC/asphalt base, comprising one

coat of acrylic primer, two coats of acrylic resurfacer

with graded silica sand to achieve required surface

27 texture, and two coats of acrylic colour finish, including SqM 247 ₹670.00 ₹165,490.00

surface cleaning, crack filling up to 2 mm, material,

labour, application by squeegee/roller, curing,

protection and complete as per manufacturer’s

specifications and direction of Engineer-in-Charge

Providing and applying game line marking on finished

sports court surface using approved acrylic line marking

paint in appropriate colours, carried out strictly as per

relevant International Federation standards and

28 approved drawings, including setting out, masking, Per Court 2 ₹5,750.00 ₹11,500.00

surface cleaning, two coats of line marking paint of

uniform width, sharp edges, curing, protection and

complete as per direction of Engineer-in-Charge

Providing, supplying and placing in position complete

movable / portable badminton net and pole system

conforming to international badminton standards,

comprising powder-coated aluminium / MS posts with

29 wheeled or weighted base, standard size badminton net Set 2 ₹21,500.00 ₹43,000.00

with centre support strap, adjustable tensioning

mechanism, nylon net with top binding and cable,

including assembly, alignment, testing and complete as

per direction of Engineer-in-Charge.

Providing, supplying and placing in position complete

movable / portable volleyball net and pole system

conforming to international volleyball standards,

comprising powder-coated aluminium / MS posts with

30 wheeled or weighted base, standard size volleyball net Set 2 ₹50,000.00 ₹100,000.00

with centre support strap, adjustable tensioning

mechanism, nylon net with top binding and cable,

including assembly, alignment, testing and complete as

per direction of Engineer-in-Charge.

TOTAL AMOUNT ₹445,975.56

TOTAL AMOUNT ₹445,975.56

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead & lift.(A)

Loose or soft soil

Rolling and consolidation using vibratory road roller 8 -

10 tonne capacity (incl. watering)(A) Earth work (layer

not exceeding 200mm thickness)

Providing and laying cement concrete 1:3:6 (1-Cement :

3- coarse sand : 6- hand broken stone aggregates

33 mmnominal size) and curing complete excluding cost of CuM 35 ₹3,064.60 ₹107,261.00

formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.200

and curing complete excluding the cost of formwork

34 and reinforcement for reinforced concrete work in (A) CuM 105 ₹4,049.38 ₹425,184.90

Foundations, footings, Base of columns and Mass

Providing, supplying and fixing double-user Air Walker

outdoor gym equipment made of heavy-duty GI ISI-

marked tubular sections, comprising dual foot pedals

with anti-skid surface, smooth swing mechanism with

sealed bearings, ergonomically designed hand grips,

34 complete with corrosion-resistant powder-coated finish Nos. 1 ₹39,100.00 ₹39,100.00

of minimum 80–90 microns, stainless steel fasteners,

transportation, unloading, placement, alignment,

anchoring to finished surface, testing and

commissioning, complete as directed by Engineer-in-

Providing, supplying and fixing single-user Chest Press

outdoor gym equipment fabricated from GI ISI-marked

pipes with smooth lever-based resistance mechanism,

ergonomically designed seat and backrest, anti-slip

35 handles, sealed bearings, anti-corrosive treatment and Nos. 2 ₹25,300.00 ₹50,600.00

powder-coated finish of minimum 80–90 microns,

including all nuts, bolts, transportation, unloading,

fixing, anchoring, testing and commissioning, complete

Providing, supplying and fixing double-user Chest Press

outdoor gym equipment constructed from heavy-duty

GI ISI-marked tubular steel, fitted with dual operating

arms, ergonomic seating, smooth bearing mechanism,

36 anti-rust treatment and powder coating of minimum Nos. 1 ₹39,675.00 ₹39,675.00

80–90 microns, inclusive of all accessories,

transportation, unloading, surface anchoring, testing

and commissioning, complete as directed.

Providing, supplying and fixing triple-user Leg Press

outdoor gym equipment made of robust GI ISI-marked

steel sections, designed with three independent seating

and foot-press mechanisms, anti-skid foot plates, sealed

37 bearing system, anti-corrosive treatment and powder Nos. 1 ₹35,650.00 ₹35,650.00

coating of minimum 80–90 microns, including

transportation, unloading, anchoring, testing and

commissioning, complete as directed.

Providing, supplying and fixing Sky Walker outdoor gym

equipment fabricated from GI ISI-marked pipes,

consisting of dual suspended foot pedals with smooth

swing motion, ergonomic hand support, sealed

38 bearings, anti-rust treatment and powder-coated finish Nos. 2 ₹23,000.00 ₹46,000.00

of minimum 80–90 microns, including transportation,

unloading, fixing, anchoring, testing and commissioning,

complete as directed.

Providing, supplying and fixing double-user Seated

Puller outdoor gym equipment manufactured from GI

ISI-marked steel pipes, fitted with dual pull handles,

ergonomic seating, smooth bearing-based motion

system, anti-corrosion treatment and powder coating of

minimum 80–90 microns, including transportation,

unloading, anchoring to surface, testing and

commissioning, complete.

Providing, supplying and fixing 2-in-1 Twister outdoor

gym equipment consisting of dual rotating standing

platforms with anti-skid surface, central support post

made from GI ISI-marked steel, sealed rotation

mechanism, anti-corrosive treatment and powder

coating of minimum 80–90 microns, including

transportation, unloading, anchoring, testing and

commissioning, complete.

Providing, supplying and fixing Walking Barrel outdoor

gym equipment comprising rotating cylindrical barrel

with anti-slip textured surface, mounted on heavy-duty

GI ISI-marked steel frame, sealed bearings, anti-rust

treatment and powder-coated finish of minimum 80–90

microns, including transportation, unloading, anchoring,

testing and commissioning, complete.

Providing, supplying and fixing Pull-Up Bar System

outdoor gym equipment consisting of multiple

horizontal bars at different heights made from GI ISI-

marked steel pipes, welded construction, smooth edges,

anti-corrosive treatment and powder coating of

minimum 80–90 microns, including transportation,

unloading, fixing, anchoring, testing and commissioning,

TOTAL AMOUNT ₹913,832.58

TOTAL AMOUNT ₹913,832.58

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead & lift.(A)

Loose or soft soil

Excavation of pits of size 0.60 m × 0.60 m × 0.60 m for

44 plantation work. Each 15.00 ₹ 109.00 ₹1,635.00

Excavation of pits of size 0.45 m × 0.45 m × 0.45 m for

45 plantation work. Each 15.00 ₹ 67.00 ₹1,005.00

Supply of sediment soil for garden(with laying work)

Desi shade fertilizer supply work

48 Supply & laying of NPK Fertilizer SqM 1356 ₹10.00 ₹13,560.00

49 Supply & Laying of Vermicompost fertilizer Kg 2500 ₹20.00 ₹50,000.00

Providing, supplying and spreading cocopeat material of

approved quality for mulching in planting beds, shrub

areas, tree basins and landscaped zones, including

transportation to site, loading and unloading, labour for

spreading and uniform application to required

thickness, proper leveling and finishing, complete in all

respects as directed by Engineer-in-Charge.

Providing and laying Cynodon dactylon (Bermuda Grass

– Selection 1) lawn by turfing/sprigging method using

healthy, well-grown and weed-free grass, including

minor surface levelling and dressing, removal of debris

and unwanted material, preparation of surface to

proper slope and camber, laying of grass uniformly,

51 watering immediately after laying, rolling to ensure SqM 881 ₹297.00 ₹261,657.00

proper root contact with soil, and maintaining the lawn

including regular watering, mowing, weeding and care

for a period of 2 months to ensure proper

establishment, complete in all respects as directed by

Engineer-in-Charge

Supplying, planting and maintaining Mahendi

(Clerodendron inerme) plants of minimum 1.0 foot

height, grown in 6" × 8" polybags, healthy, well-rooted,

uniform in growth and disease-free, of approved

nursery quality, including placement in prepared

52 planting beds/pits provided by others, proper alignment SqM 118 ₹517.00 ₹61,006.00

and spacing as per approved layout, application of

recommended fertilizer, fungicide and insecticide

treatment at the time of planting, watering, initial

trimming and shaping if required,complete in all

respects as directed by Engineer-in-Charge.

Providing, supplying and planting healthy nursery-

grown plants of Leucophyllum frutescens (Texas Sage)

of minimum height 450–600 mm in prepared planting

pits of size 450 mm × 450 mm × 450 mm, filled with

mixture of garden soil, sand and well decomposed farm

53 yard manure in proportion 2:1:1, including excavation of Each 250 ₹87.00 ₹21,750.00

pits, backfilling, planting, watering, staking if required,

initial maintenance for 30 days, including all labour,

materials, tools, transportation, loading, unloading and

complete installation as directed by the Engineer-in-

Supplying, planting and maintaining Spider Lily plants of

0.5 to 1.0 feet height, grown in 6" × 8" polybags,

healthy, well-rooted and disease-free, including

placement in prepared planting beds/pits provided by

54 others, proper alignment and spacing, application of SqM 150 ₹40.00 ₹6,000.00

recommended fertilizer, fungicide and insecticide

treatment at the time of planting, watering, initial

cleaning and pruning if required, complete in all

respects as directed by Engineer-in-Charge.

Providing, supplying and planting healthy nursery grown

plants of Pandanus odorifer (Pandanus / Screw Pine)

having minimum height 600–900 mm in prepared pits

including proper planting, watering, staking if required,

55 mulching, initial maintenance for 30 days, including all Each 150 ₹37.00 ₹5,550.00

labour, materials, loading, unloading, carriage, tools,

machinery and complete installation as directed by the

Engineer-in-Charge.

Supplying, planting and maintaining Traveller Palm

(Ravenala madagascariensis) grown in 21" × 21"

polybags, healthy, well-established, disease-free and of

approved nursery quality, including placement in

prepared planting pits provided by others, proper

positioning, alignment and verticality, application of

56 recommended fertilizer, fungicide and insecticide Each 6 ₹1,680.00 ₹10,080.00

treatment at the time of planting, watering, initial

cleaning of dried foliage if required, staking and support

where necessary, replacement of dead plants during

maintenance period, complete in all respects as

directed by Engineer-in-Charge

Supplying, planting and maintaining Bismarckia Palm

(Bismarckia nobilis) grown in 21" × 21" polybags,

healthy, well-established, true to type, and disease-free,

of approved nursery quality, including placement in

prepared planting pits provided by others, proper

positioning and alignment ensuring verticality,

57 application of recommended fertilizer, fungicide and Each 7 ₹2,220.00 ₹15,540.00

insecticide treatment at the time of planting, watering,

staking and necessary support where required, removal

of dry or damaged fronds if required, replacement of

dead plants during maintenance period, complete in all

respects as directed by Engineer-in-Charge.

Supplying, planting and maintaining Mayurpankh plants

(Thuja / Platycladus orientalis or approved equivalent

species) grown in 21" × 21" polybags, healthy, well-

established, uniform in growth, and disease-free, of

approved nursery quality, including placement in

prepared planting pits provided by others, proper

58 positioning and alignment ensuring verticality, Each 7 ₹1,680.00 ₹11,760.00

application of recommended fertilizer, fungicide and

insecticide treatment at the time of planting, watering,

staking and necessary support where required, initial

trimming if required, replacement of dead plants during

maintenance period, complete in all respects as

directed by Engineer-in-Charge.

Supplying, planting and maintaining Champa tree

(Plumeria species / Michelia champaca or approved

equivalent species) grown in 25" × 25" polybags,

healthy, well-established, true to type, and disease-free,

of approved nursery quality, including placement in

prepared planting pits provided by others, proper

positioning and alignment ensuring verticality,

59 application of recommended fertilizer, fungicide and Each 6 ₹3,780.00 ₹22,680.00

insecticide treatment at the time of planting, watering,

staking and necessary support where required, removal

of damaged or dry branches if required, replacement of

dead plants during maintenance period, complete in all

respects as directed by Engineer-in-Charge.

Supplying, planting and maintaining Cerbera Red

(Cerbera odollam – red flowering variety) grown in 21"

× 21" polybags, healthy, well-established, true to type

and disease-free, of approved nursery quality, including

placement in prepared planting pits provided by others,

proper positioning and alignment ensuring verticality,

60 application of recommended fertilizer, fungicide and Each 5 ₹3,120.00 ₹15,600.00

insecticide treatment at the time of planting, watering,

staking and necessary support where required, initial

pruning if required, replacement of dead plants during

maintenance period, complete in all respects as

directed by Engineer-in-Charge

TOTAL AMOUNT ₹829,181.04

TOTAL AMOUNT ₹829,181.04

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead & lift.(A)

Loose or soft soil

Providing and laying cement concrete 1:3:6 (1-Cement :

3- coarse sand : 6- hand broken stone aggregates

62 mmnominal size) and curing complete excluding cost of CuM 21 ₹3,064.60 ₹64,356.60

formwork in (A) Foundation and Plinth

Brick Masonry work in Cement:Mortar 1:6

20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of

64 12mm thick backing coat of C.M. 1:3 (1-cement : 3- SqM 468 ₹312.56 ₹146,278.08

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface

to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

Finishing wall with water proofing cement paint of on

wall surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and

remains of loose powered materials.

Providing, fabricating, supplying and fixing M.S. railing

of height 1 m consisting of vertical M.S. bars/pickets of

16–20 mm dia or equivalent square section at suitable

spacing, welded to horizontal M.S. flat/rectangular

sections forming panels, including M.S. posts of suitable

size fixed at regular intervals, complete with base

67 plates, anchor bolts, welding, grinding, surface Rmt. 260.00 ₹ 2,645.00 ₹687,700.00

preparation, one coat of anti-corrosive primer and two

coats of synthetic enamel paint or powder coating in

approved colour, fixing in position over concrete/stone

surface with necessary fasteners, alignment and

finishing, complete in all respects as directed by

Engineer-in-Charge.

TOTAL AMOUNT ₹1,368,507.88

TOTAL AMOUNT ₹1,368,507.88

STREET FURNITURE & SCULPTURE

Excavation of Foundation in Hard Murrum from 0.0 mtr.

to 1.50 mtr depth including dewatering with lifting

68 and laying in limit as instructed Cum. 104 ₹141.00 ₹14,664.00

Providing and laying cement concrete 1:3:6 (1-Cement :

3 coarse sand : 6- hand broken stone aggregates

69 mmnominal size) and curing complete excluding cost of Cum. 30 ₹3,064.60 ₹91,938.00

formwork in (A) Foundation and Plinth

CC work M-20 for RCC footing using aggregate of size 10-

20 mm, centring, curing, finishing etc. complete

70 (without reinforcement) Cum. 24 ₹5,500.00 ₹132,000.00

CC work M-20 for Column using aggregate of size 10-20

mm, centring, curing, finishing etc. complete (without

71 reinforcement) Cum. 1.00 ₹ 6,400.00 ₹6,400.00

Providing TMT Bar FE 550D reinforcement for R.C.C.

72 work including bending, binding and placing in position Kg. 1525 ₹94.05 ₹143,426.25

complete upto floor two level

Providing and laying controlled cement concrete M.200

and curing complete excluding the cost of formwork

73 and reinforcement for reinforced concrete work in (A) CuM 8 ₹4,049.38 ₹32,395.04

Foundations, footings, Base of columns and Mass

Supply, Fixing & Polishing of Kota Stone work thickness

20-25 mm to be fixed in Lime:Mortar 1:2 and liquid

Cement and as instructed

Providing, casting, supplying and installing GFRC (Glass

Fibre Reinforced Concrete) Bollards of approved design

and finish, having overall height 1200 mm, equilateral

triangular cross-section with each side measuring

mm, slightly tapered profile as per approved drawing,

manufactured using white cement based GFRC mix with

alkali-resistant glass fibres, minimum compressive

strength 25 MPa, complete with smooth fair-faced

75 finish, chamfered edges, internal MS reinforcement Each 6 ₹11,615.00 ₹69,690.00

cage as required. The bollard shall be fixed in position

over RCC foundation block of suitable size (minimum

450 mm × 450 mm × 450 mm or as approved), including

alignment, plumbing, grouting with non-shrink grout,

curing, surface protection and all labour, tools, tackles

and materials complete as directed by Engineer-in-

Providing, supplying, transporting and installing joinable

precast GFRC middle planter module of approved

design, circular / faceted form, overall 2.5 ft (750 mm)

diameter and 1.5 ft (450 mm) height, manufactured in

76 M30 grade concrete, machine-vibrated and cast in steel Nos. 32 ₹20,500.00 ₹656,000.00

moulds, with minimum 50 mm thick walls, internal

cavity suitable for planting, finished with smooth

exposed concrete / oxide cement finish as approved.

Providing, supplying, transporting and installing joinable

precast GFRC end bench module of approved design,

2.5 ft (750 mm) diameter footprint and 1.5 ft (450 mm)

height, designed for seating use, manufactured in M30

grade reinforced concrete, machine-vibrated, cast in

steel moulds, with smooth exposed concrete / oxide

Providing, supplying, transporting and installing joinable

precast GFRC end planter module of approved design,

2.5 ft (750 mm) diameter and 1.5 ft (450 mm) height,

manufactured in M30 grade reinforced concrete,

suitable for terminating modular seating-planter

arrangement, with internal planting cavity and smooth

exposed concrete / oxide cement finish

Providing, supplying, transporting and installing joinable

precast GFRC middle bench module of approved design,

2.5 ft (750 mm) diameter and 1.5 ft (450 mm) height,

suitable for modular seating arrangements in urban

roadside and pocket garden areas, manufactured in

M30 grade reinforced concrete, machine-vibrated and

cast in precision steel moulds.

Design, manufacture, supply and installation of

premium outdoor litter bin of approx. 80 litre capacity,

comprising internal removable MS waste container

made from minimum 1.6 mm thick CRCA sheet with

powder-coated finish, enclosed with vertical hardwood

slats of minimum 25 mm thickness fixed on MS frame,

including laser-cut top cover with waste opening,

concealed hinges/handles, corrosion-resistant

fasteners, anti-termite treatment to wood, exterior

weather-resistant coating, complete with all civil work in

all respects as per approved design and drawings

Supply and fixing of factory-manufactured precast

cement concrete Tree Guard, overall

size800mm×800mm× 75mmthickwith circular inner

openingof 500mmdiameter,ofapproved design and

pattern as shown in drawings. Tree guard shall be

manufactured using controlled design mix concrete of

minimum M30grade through precast / machine-cast

process, properly compacted to achieve dense, durable

81 units. Finished units shall be true to shape and Nos. 30 ₹1,500.00 ₹45,000.00

dimensions, with smooth finish, uniformcolour,

sharpedges, and free fromcracks, honeycombing,

warping, or any surface defects. Itemincludes supply,

loading, unloading, and stacking at site complete, but

excludes excavation, bedding, fixing, jointing,

installation, andall other civil works

Supplying and fixing outdoor bench comprising MS

fabricated side supports made from minimum 2.0 mm

thick MS sheet, hot dip galvanized and polyester

powder coated finish suitable for exterior conditions,

with seating and backrest made of high-quality WPC

(Wood Plastic Composite) planks of approved shade and

profile, fixed with stainless steel fasteners, complete

82 with edge finishing, surface treatment, base plate Each 10 ₹28,175.00 ₹281,750.00

provision for floor anchoring with suitable anchor bolts,

installation and fixing in position, complete as per

approved design and direction of Engineer-in-Charge.

Overall Size: Approx. 1500 mm (L) × 450 mm (D) ×

Providing, fabricating, supplying and fixing FRP (Fiber

Reinforced Plastic) sculpture of approved design and

shape having overall height of 1.50 m (approximately

ft), manufactured using high quality moulded FRP with

adequate thickness and structural reinforcement,

finished with weather resistant gel coat and exterior

83 grade PU/automotive paint in approved colours, Each 1 ₹184,000.00 ₹184,000.00

including internal MS supporting framework as

required, transportation to site, installation over

pedestal with anchor bolts, necessary fixing

arrangements, finishing and cleaning complete in all

respects as directed by Engineer-in-Charge.

TOTAL AMOUNT ₹2,769,326.29

TOTAL AMOUNT ₹2,769,326.29

CHILDREN PLAY GROUND

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff \ upto 50 Meter

lead.(A) Loose or soft soil

Rolling and consolidation using vibratory road roller 8 -

10 tonne capacity (incl. watering)(A) Earth work (layer

not exceeding 200mm thickness)

Construction of granular sub-base by providing close

graded material, spreading in uniform layers with motor

grader on prepared surface, mixing by mix in place

86 method with rotavator at OMC and compacting with CuM 15 ₹586.00 ₹8,790.00

vibratory roller to achieve the

desired density complete (Grade-III)

Supplying, laying and fixing non-woven polypropylene

geotextile fabric of minimum 150–200 GSM beneath

red soil/murum pathway over prepared GSB surface,

including surface cleaning, proper overlapping

87 (minimum 300 mm at joints), anchoring with U- SqM 100 ₹75.00 ₹7,500.00

pins/staples, trimming, protection during subsequent

layer placement and complete as per specifications and

engineer’s direction

Providing, supplying and spreading washed medium

river sand of approved quality, free from silt, clay,

organic impurities and deleterious materials, having

rounded particles suitable for play area cushioning, laid

to required thickness over prepared surface, evenly

levelled and dressed true to line and level, complete as

per drawings and directions of Engineer-in-Charge.

Providing and laying cement concrete 1:3:6 (1-Cement :

3 coarse sand : 6- hand broken stone aggregates

89 mmnominal size) and curing complete excluding cost of Cum. 3 ₹3,064.60 ₹9,193.80

formwork in (A) Foundation and Plinth

Providing and installing timber balance beam play

equipment consisting of treated hardwood log of

approximately 200–250 mm diameter and 2.0–2.5 m

90 length, mounted on timber supports embedded in Each 2 ₹10,350.00 ₹20,700.00

provided PCC foundation including rounding edges,

sanding, protective coating and all necessary hardware

Providing and fixing timber stepping stumps play

equipment made of treated hardwood logs of 200–300

mm diameter and varying heights 300–450 mm as

91 specified, fixed securely in ground with provided PCC Each 10 ₹3,600.00 ₹36,000.00

foundation including sanding, edge rounding and

protective coating complete.

Providing and installing timber climbing arch bridge

fabricated from treated hardwood members forming

curved frame approximately 2.0 m length and 1.0 m

height (or as specified) , fitted with anti-slip timber

steps, fixed over ground anchors with stainless steel

fasteners including sanding, finishing and protective

wood coating complete.

Providing and fixing play tunnel equipment consisting of

HDPE / FRP / RCC pipe of approximately 600–800 mm

diameter and 1.5–2.0 m length, placed over prepared

ground with PCC support blocks including anchoring and

finishing complete.

Providing and installing timber seesaw play equipment

consisting of treated hardwood beam mounted on steel

pivot mechanism with seating ends and safety handles

including foundation fixing, anti-corrosion coating to

metal parts and wood preservative finish complete.

Providing and fixing play activity panel consisting of

timber frame with HDPE / FRP interactive play elements

including rotating discs, pipes and sensory components

mounted on treated timber posts fixed in provided

concrete foundation complete.

Providing and fixing round play table fabricated using

timber / HDPE spool structure of approximately 900 mm

96 diameter and 600 mm height (or as specified) , edges Each 2 ₹14,400.00 ₹28,800.00

rounded and finished with weather resistant coating

Providing and fixing timber log play obstacles consisting

of treated hardwood logs of 200–300 mm diameter and

varying lengths(as specified) , fixed partially embedded

in ground with provided PCC footing including sanding

and wood preservative coating complete.

TOTAL AMOUNT ₹363,646.96

TOTAL AMOUNT ₹363,646.96

ELECTRICAL WORK

Providing, supplying, transporting,erecting, testing and

commissioning 5.0 metre high decorative LED pole light

complete in all respects, made from GI tubular pole

(114mm OD bottom section–2.0m & 76mm OD top

section–3.0 m ) with PP powder coated finish, fitted

with aluminium post-top LED luminaire of 500 mm

diameter,equipped with 100 Watt LED module using

98 high-efficiency LED chips and electronic driver, including Each 55.00 ₹12,500.00 ₹687,500.00

base plate 200×200×8mmthick, 600 mm long 12mm dia

J type foundation bolts with nuts & washers, internal

wiring with MCB and connector strip, complete

installation, alignment, electrical connections, testing

and commissioning at site, including all materials,

labour, tools, tacklesand incidentals,as directed by

Engineer-in-Charge.

Providing, supplying, installing, testing and

commissioning spot light (Model: LNX 1201 Fountain or

approved equivalent) suitable for outdoor applications,

having wattage 36W AC, operating voltage 24V AC/DC,

with surge protection of 2 kV, equipped with 12 high

power LED chips providing multi-colour illumination,

complete with corrosion-resistant housing, toughened

99 glass cover, stainless steel mounting bracket, IP68 Each 5.00 ₹3,680.00 ₹18,400.00

protection suitable for continuous outdoor operation,

including waterproof cable entry, fixing with necessary

clamps and fasteners, connection with suitable

submersible cable, alignment, testing and

commissioning, complete in all respects as directed by

Engineer-in-Charge.

Providing & erecting approved make street light / wall

mounting junction box compression moulded from SMC

(thermoset plastic) vertical sliding cover having locking

with square head stud loop in / loop out in built

terminal suitable for four core cable, waterproof of I.P.

54 protected with clamp or bolt nut & earth bolt of

following size.(B) 250mm x 194mm x 99 mm

Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.(4) 40 mm

Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body

& doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/

flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as

per requirements & instruction of engineer-in-charge

with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire /

102 copper-aluminium strips, rubber grommets, rib, bakelite Sqm. 2.00 ₹ 10,365.00 ₹

control fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc.

The dimension shall be measured excluding base

beams) The panel shall be supplied with following

approved manufacturers with following size.(A) locally

fabricated panel board (i) with 350 mm depth

providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C. system

103 and having breaking capacity 10 KA to be erected in Ea. 55.00 ₹ 111.00 ₹

existing box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for

lighting Load (B Curve) having 10 KA breaking capacity &

104 confirms to IS : 8828 in existing box having following Ea. 2.00 ₹ 293.00 ₹

capacity (B) 32 Amp. Cat.III

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

105 having characteristic of quick action & tripping with all Ea. 2.00 ₹ 2,611.00 ₹

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed(ii) 40Amps. FP Cat. III

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

106 having characteristic of quick action & tripping with all Ea. 4.00 ₹ 3,010.00 ₹

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed(ii) 63Amps. FP Cat. III

Providing and erecting metallic vitrified danger notice

board as per language suggested by engineer incharge

for MEDIUM VOLTAGE installation to be erected as per

Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface as

Providing 1:2:4 cement concrete foundation & 70 %

PCC from bottom including excavation for the pole of

size 45 x 45 x 100 cm. Deep in below ground level with

109 plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high Ea. 55.00 ₹ 801.00 ₹

upper ground level with necessary curing and finishing

in approved manner.( for 4 & 6 mtr pole)

Supply of Smart Streetlight Control & Monitoring

System having an Individual Streetlight Controller(iSLC)

for control, monitoring, & fault detection of each

streetlight., Equipped with a 32-bit CPU., Operates on

90V to 600V AC., Has 1 output for 0%-100% dimming &

compatible with 0-10 V LED dimmable driver., Individual

streetlight Cloud software-based dimming & scheduled

dimming for each streetlight., User-adjustable dimming

intensity., iSLC must be tested from an NABL Lab for

Surge Test @ 6 KV (IEC 61000-4-5), ESD Test @ 4 KV (IEC

61000-4-2), EFT @ 2 KV (IEC 61000-4-4), Conducted

Emission @ 150 KHz-30 MHz (CISPR11), Cold Test (-10

deg C) for 4 hours IS: 9000 (Part 2/Secc.4):1977 latest,

Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of 12+12

hours (IS: 9000 (Part 5/Sec.2):1981 latest), Ingress

Protection for IP65 as per IEC 60529 with all test passing

criteria as “Temporary degradation or loss of function or

performance which is self-recoverable”., Pole mount

clamps for iSLC installation. Operates on IoT Mesh WiFi /

Wi-Sun / Zigbee / LoRaWAN technologies., Bidder must

provide backhaul infrastructure for communication

technology for 5 years., iSLC with in-built energy

monitoring chip., Must monitor V, I, PF, F, KW, KWh.,

Built-in Surge protection., “Fail-safe”: iSLC ensures lights

remain ON when iSLC fails., Accelerometer inside iSLC

for pole movement alert., Failure of one iSLC will not

Programmable dimming schedules daily, monthly,

yearly, special events, astro-clock for sunset/sunrise

time with monthly offset., Live status of iSLC &

streetlight monitored online., Lamp burn hours are

monitored via CCMS Software., The iSLC must be

warranted for 5 years against manufacturing defects.,

CCMS SMART SOFTWARE , OAuth 2.0 API for sending

data to Government clouds, servers, software., CCMS

Web dashboard with secure password & OTP login., iSLC

software must integrate with Group Controller or

operate on a common platform., Hosted on trusted

cloud, data security, antivirus & attack protection.,

110 HTTPS., AES256-bit encryption., Vulnerability Each 6.00 ₹ 9,700.00 ₹

Assessment and Penetration Testing (VAPT) certificate

for CCMS Software., Streetlight management software

for load status, live analytics & reports., Energy meter

data (kW, kWh, PF, I, V, etc.) available., Utility data

reconciliation & Class 1 accuracy reports for billing.,

Energy monitoring & auditing for streetlight

infrastructure., Fault detection & alerts., Customizable

CCMS Software., WhatsApp integration, SMS & Email

Alerts., Hierarchy-wise reporting & alerts., GIS mapping

of live connected streetlight control panels &

streetlights., OTA updates., Smartphone app with local

configuration & navigation., Monitoring & reporting of

lighting parameters., Work permits, media attachments

Supplying & erecting power contactor ,AC3 duty for

111 time switch complete erected as per direction Cat III (B) Each 1.00 ₹ 1,865.00 ₹

2 pole 250V 32 Amp.

MAIN & SUBMAIN WIRES

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be

112 laid on wall with necessary clamps or in existing trench Mtr. 80.00 ₹ 177.00 ₹

/ pipe of following size of cables (A) 2 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench

/ pipe at road crossing or floor of following size of

cable. (A) 3 core 2.5Sq. Mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(D) 3 core 10 Sq. mm

(E) 3 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

(B) 4 core 6 Sq. mm

(C) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

(A) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench

/ pipe at road crossing or floor of following size of

(A) 4 core 10 Sq. mm

(B) 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc

for following size of cables.

(B) 2 to 4 core 6 Sq. mm

(C) 2 to 4 core 10 Sq. mm

(D) 2 to 4 core 16 Sq. mm

Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner.

CONDUIT & PIPES

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(C))90 mm outer dia

(D)120 mm outer dia.

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

129 coupling and buch buried in specially prepared earth pit Ea. 28.00 ₹ 365.00 ₹

complete with necessary 8 SWG earth wire. - to be

used for each Street Light

For using salt and charcoal / coke as required for pipe

Providing one bag of 25 Kg. Additional Back Filling

Compound (BFC) suitable for safe earthing device.

Providing and erecting required size Copper strip for

earthing of H.T. OCB / ACB/ Transformer, LT panel

board, Motors etc. using copper clamp.

Providing, supplying, installing, testing and

commissioning 64-channel Network Video Recorder

(NVR) of (CP Plus / Hikvision / Dahua or approved

equivalent), supporting IP cameras up to 8 MP, with

minimum 8 SATA interfaces for HDD storage,

H.265+/H.265/H.264 video compression, dual

HDMI/VGA output, multiple network ports, alarm

133 input/output, USB ports, RAID support (where Nos. 1 ₹70,500.00 ₹70,500.00

applicable), ONVIF compliance, remote monitoring

through web and mobile application, complete with

power adapter, rack mounting accessories,

configuration, integration with CCTV network and all

accessories, complete in all respects as per

specifications and directions of Engineer-in-Charge.

Providing, supplying, installing, testing and

commissioning 8 MP colour dome IP camera of CP Plus /

Hikvision / Dahua or approved equivalent with built-in

microphone, featuring minimum 8 MP (3840×2160)

resolution, 1/2.8” CMOS sensor, full-colour low-light

imaging (hybrid IR / warm-light where applicable),

H.265+/H.265/H.264 compression, ONVIF compliance,

134 fixed lens 2.8 mm / 4.0 mm as specified, minimum 30 m Nos. 4 ₹13,200.00 ₹52,800.00

IR / white-light illumination, IP67 weatherproof and

IK10 vandal-resistant housing, PoE (IEEE 802.3af) power,

including fasteners, alignment, configuration, testing

and commissioning, complete in all respects as per

specifications and directions of Engineer-in-Charge.

Providing, supplying, installing, testing and

commissioning 8 MP colour bullet IP camera of CP Plus /

Hikvision / Dahua or approved equivalent with built-in

microphone, having 1/2.8” CMOS sensor, minimum

MP (3840×2160) resolution, colour imaging in low light

(supplementary warm light where applicable),

H.265+/H.265/H.264 compression, ONVIF compliance,

135 fixed lens (2.8 mm / 4.0 mm as specified), minimum 30 Nos. 12 ₹13,200.00 ₹158,400.00

m IR / white-light illumination, IP67 weatherproof

housing, PoE (IEEE 802.3af) support, integrated audio

capture, including all fasteners, alignment,

configuration, testing and commissioning, complete in

all respects as per specifications and directions of

Engineer-in-Charge

Providing, supplying, installing, testing and

commissioning 8-port Gigabit PoE Ethernet switch of CP

Plus / Hikvision / TP-Link or approved equivalent with

SFP uplink, comprising 8 nos. 10/100/1000 Mbps RJ-45

PoE ports compliant with IEEE 802.3af/at, with

minimum 2 nos. SFP ports for fibre uplink, total PoE

136 power budget not less than 120 W, supporting VLAN, Nos. 2 ₹4,500.00 ₹9,000.00

QoS, IGMP snooping, surge protection, fanless / low-

noise operation (where applicable), including power

cord, mounting accessories, patching, basic

configuration, testing and commissioning, complete in

all respects as per specifications and directions of

Engineer-in-Charge

Supply, installing, testing and commissioning of central

management software for Viewing, multi-NVR

management, suppoerting all cameras at one single

137 screen and maximum devices management, auto search Nos. 1 ₹15,000.00 ₹15,000.00

configuration and status monitoring as per instruction

by EIC/Consultant.

Providing, supplying, installing, testing and

commissioning 8 TB capacity surveillance-grade hard

disk drive of Seagate / Western Digital / Toshiba or

approved equivalent, specifically designed for 24×7

continuous video recording, compatible with Network

Video Recorders (NVRs), supporting SATA III interface,

138 minimum 5400–7200 RPM, cache not less than 256 MB, Nos. 1 ₹25,500.00 ₹25,500.00

optimized for multi-camera environments, low power

consumption and high reliability, including mounting in

NVR, formatting, configuration, health check and

testing, complete in all respects as per directions of

Engineer-in-Charge

Providing, supplying, installing and commissioning 24U

floor-mounted network/server rack, fabricated from

heavy-gauge CRCA steel, 19-inch standard, with front

toughened glass door, lockable rear/perforated door,

removable side panels, adjustable mounting rails, cable

entry provisions at top and bottom, complete with

139 nos. cooling fans, 1 no. rack-mount Power Distribution Nos. 1 ₹20,000.00 ₹20,000.00

Unit (PDU) with surge protection, earthing provision,

hardware accessories, leveling feet/casters, installation,

alignment and testing, complete in all respects as per

specifications and directions of Engineer-in-Charge.

Providing, supplying, installing, testing and

commissioning PoE junction box for IP CCTV camera,

made of weatherproof polycarbonate / powder-coated

aluminium enclosure, suitable for outdoor installation,

including RJ45 CAT-6 termination, PoE pass-through /

140 coupler, cable glands, internal mounting plate, gasket Nos. 16 ₹1,250.00 ₹20,000.00

sealing, fixing on pole / wall / structure, proper cable

dressing, weatherproofing, testing and commissioning,

complete in all respects as per specifications and

directions of Engineer-in-Charge

Providing, supplying, installing and fixing junction box of

size 5" × 5", made of heavy-duty PVC / polycarbonate /

powder-coated metal as specified, suitable for indoor /

outdoor application, including cover with gasket, cable

141 entry knock-outs, terminal connectors, screws, rawl Nos. 16 ₹75.00 ₹1,200.00

plugs, fixing on wall / pole / structure, proper alignment,

sealing, testing and making good, complete in all

respects as per directions of Engineer-in-Charge

Providing, supplying, installing, testing and

commissioning 40-inch LED television of LG / Panasonic

/ Nextview or approved equivalent , with Full HD

resolution (1920×1080), minimum two HDMI ports and

one VGA port, USB interface, built-in speakers, wide

142 viewing angle, suitable for 24×7 display operation, Nos. 1 ₹22,500.00 ₹22,500.00

including wall-mount bracket / table stand (as

specified), power cord, basic configuration, connection

testing and commissioning, complete in all respects as

per specifications and directions of Engineer-in-Charge

Supplying & erecting approved make LAN cable of

143 following size in existing pipe as per direction [C] Mtr. 600 ₹47.00 ₹28,200.00

TOTAL AMOUNT ₹1,752,923.00

TOTAL AMOUNT ₹1,752,923.00

Providing operation and maintenance services including

routine cleaning and upkeep of all park areas such as

walking tracks, plaza areas, seating zones, sculpture

area, parking areas and open spaces; raking, leveling

and cleaning of children sand pit; collection and disposal

of garbage, leaves and debris; watering of trees, shrubs,

lawn and plantation areas; removal of weeds and light

pruning of plants; mowing of lawn and trimming of

grass; pruning of shrubs and hedges; application of

fertilizers and manure to landscape areas; inspection,

servicing and maintenance of outdoor gym equipment

and children play equipment including tightening of

144 bolts, lubrication and minor repairs; topping and Per Year 2 ₹792,400.00 ₹1,584,800.00

replacement of sand in sand pit where required;

inspection and maintenance of park lighting system

including minor repairs and replacement of fixtures;

cleaning and maintenance of parking areas and

markings; replacement of damaged plants; repair and re-

laying of paver blocks in pathways and plaza areas;

repainting and maintenance of benches, railings,

structures and gym equipment; and carrying out all

other necessary activities required for proper upkeep

and functioning of the park complete in all respects as

directed by Engineer-in-Charge.

TOTAL AMOUNT ₹1,584,800.00

TOTAL AMOUNT ₹1,584,800.00

AE/AAE DE/DEE CITY ENGINEER