SPECIAL REPAIR TO BLDG NO P-291/01 TO 08 (ORS MD ACCN) AT RAINA PARK OF 212 RKT REGT (KARGIL) AND PROVN OF 01 X SHED WITH DIMENSIONS OF 12 MTRS IN LENGTH, 12 MTRS IN WIDTH AND 6 MTRS IN HEIGHT AT MAIN GATE OF J-1 LOC AND CERTAIN OTHER SANCTIONED WORK

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed complete all as specified.

Material and labour 10mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour 15mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Material and labour 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour repairing of RCC projections, chajjas, roofs, facia etc by scarping, cutting, chiseling, de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surface with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates reinforcement with and including expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with or without facia and finished with cement mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm and applying two coats of cement base paint of tint matching with the existing surfaces at any height as required including necessary form work complete all as specified and directed. Note:- Cost of formwork and welded mesh shall be deemed to have been included in the quoted rate and nothing extra shall be payable on this account.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified and directed

Material and labour for complete removal of existing treatment by washing, rubbing down and stopping etc on wall surfaces and applying two coat of oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified.

Material and labour preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.

Material and labour preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of old surfaces of ceiling including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un plastered surfaces and applying one coat of white wash complete all as specified.

Material and labour preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint complete all as specified and directed.

Material and labour complete removal of existing treatment by washing, rubbing down and stopping etc on wall surfaces and applying two coats of cement base paint complete all as specified.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and directed

All as per srl item No. 15.00 here-in-before but reinforcement cement concrete

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Material and labour for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Material and labour for 20-25mm thick machine cut Kota stone slab flooring, jointed with grey cement mixed with pigment to match the shade of the slab including grinding, rubbing and polishing to mirror finish with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed

All as per item No 20.00 but as in skirting laid over and including 10mm thick rendering in cement mortar (1:4) as backing coat.

Material and labour 16 to 18mm thick pre polished green marble as in cooking platform laid over 15mm thick screed in cement mortar (1:6) including making of hole for LPG pipe and chamfering the corners complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size 450 x 300 x 6 to 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

All as per item No 25.00 but in skirting/ dado laid over and including 10mm thick rendering in cement mortar (1:4) as backing coat.

Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces complete all as specified and directed.

Material and labour brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per Ser item No 28.00 above but except bricks

Material and labour lean concrete (1:7:12) type F-2 using 40mm graded stone aggregate as in filling in sunken floor complete all as specified and directed

Material and labour 15mm thick rendering in cement plaster on brick or concrete surfaces in cement mortar (1:3) with integral water proofing compound @ 3% by weight of cement finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Material and labour for priming surfaces and applying heavy treatment (for severe conditions) using glass fibre base bitumen felt, grade 2 complete all as specified and directed

Supply only integral water proofing compound all as specified and directed.

Material and labour for RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in slab, chajjas, parapet, facia etc. complete all as specified and directed.

Material and labour for precast RCC (1:2:4) type B-0 using 12.5mm graded stone aggregate and set in cement mortar (1:4) as in landing, manholes cover slabs, chajjas, shelves and similar articles with plain fair faces, including champers, weatherings, throating etc complete all as specified and directed.

Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour for MS TMT bars 10 mm and over dia and cut to length, bent to shape required including cranking bending spirally for hooping for clos hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed

All as per Srl item No 37.00 but 5mm dia and over upto and including 10mm dia inserting, spacers and binders.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leaping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Material and labour cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

Wire brushing and cleaning top surface of cement concrete, including flashing and junction of parapets etc complete all as specified and directed

Material and labour for brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.

Material and labour for applying a coat of hot blown paving industrial bitumen 85/ 25 @ 1.20 kg/ sqm over a coat of primer @ 0.3 litre per sqm over the roof surface including cleaning surfaces complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed.

Material and labour for brick tile terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

All as per Ser item No 51.00 above but except tiles

Material and labour flush pointing to brick terracing tiles in cement mortar (1:3) complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.

Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-290 Gde-E-165 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Supply and fixing factory made 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 40 x 6mm thick 2nd class hard wood lipping on edge complete all as specified and directed.

Material and labour 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing in repairs 18/ 19mm thick MDF board, exterior grade, prelaminated on both side with decorative choice lamination, fixed with screws to timber frame work, including 18/19mm wide, 6mm thick 2nd Class HW lipping on edges complete all as specified and directed

Supply and fixing continuous (piano) hinges, mild steel, bright finish or electro galvanized with cupboard or drawers complete all as specified and directed

Supply and fixing 100mm size hasp and staple, mild steel, wire type, stove enameled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing 2nd class hard wood plain fillets. Square or rectangular or triangular in section and bull-nosed, splayed, chamfered or rounded on one edge or face, clean sawn, planed on both sides secured with nails or beads , sectional area exc 13 Sqcm and not exc 25 Sqcm, including two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Supply and fixing 75mm brass handles, cast type, polished bright fixed with brass screw complete all as specified and directed

Supply and fixing in repair steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters including box type/ projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolts and handles etc and necessary cooler arrangement in window and fixed with PCC (1:2:4), complete as per Drg No. CEJZ/TD-1020/08 sheet 1/3 to 3/3. Note : The above rate for glazed and gauged shutter window/ ventilator and measured one time clear opening for payment of window/ ventilator

Material and labour stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Material and labour for 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

Material and labour for 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing in repair factory made built-in steel cup board with pressed steel frame of size 75mm x 50mm x 1.25mm thick with pressed steel shutter 1.25mm thick fixed to masonry wall by hold fasts, made out of 25 x 3mm flat iron including MS hanging rod of 10mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provn of MS peg set 3 pegs including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No. CEJZ/TD/20/11 sheet 1/5 to 5/5 dated 01 Aug 2011, complete all as specified and directed

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing Prayag Syment butt hinges 100mm long all as specified and directed.

Supply and fixing Prayag Syment tower bolt 200mm long all as specified and directed.

Supply and fixing Prayag Syment bow handle 125mm long all as specified and directed.

Material and labour for mild steel sliding door bolts 300mm long plate type stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply and fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

Supply and fixing 125mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

Supply and fixing MS pressed handles, oval type, stove enameled black 125mm size complete all as specified and directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 140mm complete all as specified.

Supply and fixing in repairs 20mm dia curtain rails mild steel chromium plated with fixing brackets fixed in cup boards complete all as specified and directed.

Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking up or down 15mm bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Material and labour galvanised steel tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. including taking up/ down existing tubing complete all as specified and directed.

Material and labour galvanised steel tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. including taking up/ down existing tubing complete all as specified and directed.

Material and labour for refixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Material and labour for refixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Supply and fixing in repair Bib Cock long nose (Foam Flow) with Flange of MAKE: Prayag CAT No. 9806 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Supply and fixing body bib cock (Foam flow) with flange suitable for fixing to 15mm bore GI pipe complete all as specified and directed Make : Jaquar Cat Part No. OPP-15037PM or equivalent to Group 1 of Appendix 'B' of Particular specification

Supply and fixing in repair single lever basin mixer with popup waste of MAKE: Prayag CAT No. 9451 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Supply and fixing centre hole basin mixer with popup waste with 450mm long braided hoses suitable for fixing to 15mm bore GI pipe complete all as specified and directed Make : Jaquar Cat Part No. CON-169 KNB or equivalent to Group 1 of Appendix 'B' of Particular specification

Supply and fixing in repair Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of MAKE: Prayag CAT No. 9880 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Supply and fixing in repair Concealed Stop Cock with Adjustable Wall Flange of MAKE: Prayag CAT No. 9818 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Supply and fixing in repair angular stop Cock with Wall Flange of MAKE: Prayag CAT No. 9810 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Supply and fixing angular stop cock with wall flange suitable for fixing to 15mm bore GI pipe complete all as specified and directed Make : Jaquar Cat Part No. OPP-15053PM or equivalent to Group 1 of Appendix 'B' of Particular specification

Supply and fixing in replacement 15mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified

Supply and fixing in replacement 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified

Supply and fixing in repairs vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed.

Supply and fixing in repairs one piece wash basin with pedestal of size 565mm x 430mm x 845mm of any colour of Make : Prayag Cat No. 4603 or equivalent makes of Group I of Appx “B” complete all as specified and directed.

Supply and fixing PVC connection 15mm bore size with PTMT nuts of length 450mm fixed in repair complete all as specified and directed.

Supply and fixing in repair flexible PVC waste pipe of approved quality 25mm bore, 75cm long with one end socketed fixed to waste coupling including one PVC reducer 25mm complete all as specified and directed

Supply and fixing in repairs PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets complete all as specified and directed.

Supply and fixing in repairs mild steel CP grating 125mm dia with centre hole all as specified and directed by the Engr-in-Charge.

Supply and fixing in repairs droplets looking mirror (900 x 600 x 6mm) of Make : Pragay Cat No. BLM-03 or equivalent makes of Group I of Appx “B” and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Supply and fixing in repairs soap dish holder of Make : Pragay Cat No. BA-05 or equivalent makes of Group I of Appx “B” and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Supply and fixing soap dish stainless steel chromium plated fixed in repair with brass screws and rawl plug complete all as specified and directed Make : Jaquar model No. AKP-35731P.or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing in repairs sheet glass shelf 500 x 125mm (with brass brackets) of Make : Pragay Cat No. BEA-45 or equivalent makes of Group I of Appx “B” and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Supply and fixing in repairs corner shelf 300mm (with brass brackets) of Make : Pragay Cat No. BEA-46 or equivalent makes of Group I of Appx “B” and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Supply and fixing Acrylic corner shelf (with chromium plated bracket) 3 in set of shelf 8mm thick with and including chromium plated brass screws and wooden/ plastic cleats, approved quality complete all as specified and directed. Make: Jaquar Cat No. CAN 1173 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed complete all as specified and directed

Supply and fixing of peg set of 5 of PTMT fixed to rear side of door shutter in bath complete all as specified and directed.

Supply and fixing in repairs brass towel rail of Make : Pragay Cat No. BA-80 or equivalent makes of Group I of Appx “B” fixing with chrmoium plated brass screws and wooden/ plastic cleats complete all as specified and directed

Supply and fixing in repairs stainless steel kitechn rack of size 31" x 36" x 10" of Make : Pragay Cat No. P-348 or equivalent makes of Group I of Appx “B” and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Supply and fixing in repairs stainless steel sink single bowl 1.0mm thick overall size 610 x 510 x 203mm and bowl size 560 x 410 x 203mm for kitechn or laboratory with plugs, washers waste coupling 32mm bore of brass chromium plated etc of Make : Pragay Cat No. P-348 or equivalent makes of Group I of Appx “B” complete all as specified and directed

Material and labour for dis-connecting existing tank of capacity 500 litre, setting aside (or lowering, if required) for repairs, cleaning and hoisting, re-connecting and re-fixing in position including making connections complete all as specified and directed. Note:- Write the date of cleaning and next date of cleaning of water tank on all new/old tanks after cleaning the tank

Supply and fixing rotational moulded polye-thylene water storage tanks, 500 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, complete all as specified & directed.

Supply and fixing 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

All as per srl item No. 120.00 here-in-before but in repairs

Supply and fixing in repair Over Head Shower square wall shower (Adjustable) of size (9”x9”) including all fittings of MAKE: Prayag CAT No. BOS-33 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Supply and fixing in repair Hand Shower with 1.50 Mtr flexible tube and hook of MAKE: Prayag CAT No. BHS-91S or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., complete all as specified.

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) branches piece, double (double Y) equal or unequal with rubber rings joints fixed to walls complete all as specified and directed

Supply and fixing 75mm bore PVC (SWR) branches piece, double (double Y) equal or unequal with rubber rings joints fixed to walls complete all as specified and directed

Supply and fixing PVC (SWR) junction single (Single T) 110mm bore, equal or unequal complete all as specified

Supply and fixing PVC (SWR) junction single (Single T) 75mm bore, equal or unequal complete all as specified

Supply and fixing PVC (SWR) vent cowl 75mm bore all as specified and directed.

Material and labour for 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement fixed complete all as specified and directed.

Supply and fixing cast iron floor trap with grating including jointing to waste pipe in run lead joint fixed in cement concrete type (1:2:4) type B-1 diameter of outlet 75mm, complete all as specified and directed.

Material and labour 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection/ path including finishing the concrete surface even & smooth without using extra cement complete all as specified & directed.

Material and labour for 50mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in floor finishes/ plinth protection laid in alternate bay n.exc 2m in length each bay including cutting groove of 6mm wide and 10mm deep filled with bituminous mastic, finished fair and even complete all as specified and directed.

Material and labour 60mm thick coloured reflective type machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over and including 40mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed.

Material and labour PCC (1:2:4) type B-2 using 40mm graded crushed stone aggregate as in surface channels and drains without using extra cement etc complete all as specified and directed

Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base or foundation filling, mass concrete etc complete all as specified and directed.

Material and labour 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed.

Material and labour 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed.

Material and labour 75mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors laid in panels and finishing for marking good road surface spike rolling to surfaces or making impresions of xpanded metal, white the concrete is green or as directed all as specified.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, mass concrete and bases for columns etc complete all as specified and directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe-410-W Gde-E-250 quality 'A' complete all as specified and directed

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W Gde-E-250 quality 'B' complete all as specified and directed

Supply and fixing mild steel screw bolts diameter of neck 12 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 30cm long complete all as specified and directed.

Supply and fixing rolled mild steel work roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed.

S&F compound girder complete all as specified and as and stanchions, lattice girder, aerial masts, staging of water tanks and the like including caps, bases splices etc built up from two or more beam or channel section for angle with plates including all lattice bar stiffeners, gussets plate etc Fe-290 (Gde E-165) complete all as specified and directed

Supply and fixing Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. Note for srl item No. 143 to 150 : Work have to be executed in highly restricted area and approx. 10 Km away from Jalandhar Cantt. A Shed of dimensions of 12 mtrs in length, 12 mtrs in width and 6 mtrs in height to be constructed. The rate may be quoted accordingly

Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed complete all as specified and directed.

Supply and fixing stainless steel plate rack of superior quality size 36" x 24" with not less than 8 kg fixed in repairs complete all as specified and directed.

Supply and fixing in repair single lever sink mixer swinging spout (wall mounted) with connecting legs & wall flanges of Make : Prayag Cat No. 9855 or equivalent makes of Group I of Appx “B” (as approved) suitable for fixing to 15mm bore GI pipe, complete all as specified and directed

Supply and fixing steel rolling shutters 1mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete push pull or manual type complete all as specified and directed.

Supply and fixing safety lever locks mils steel with 4 levers for rolling shutter complete all as specified and directed

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed

Excavation over areas n.exc. 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified and directed

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Filling under floor using soil obtained from excavation spreading and leveling soil in layers n.exc 25 cm thick and well ramming including watering as required complete all as specified

Material and labour for steel ventilator with top hung shutter including hinges, steel peg stay including taking down old unserviceable steel window complete all as specified and directed

Material and labour reinforced cement concrete (1:1½:3) type A-1 mix using 20mm graded stone aggregate as in slabs supported on wall, beams and columns in floor, roof, landing, balconies, canopias, deck slabs and in slef complete all as specified and directed.

Material and labour reinforced cement concrete (1:1½:3) type A-1 mix using 20mm graded stone aggregate as in roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Material and labour 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles of size 400 x 400x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Supply and fixing hand shower (health faucet) with 8 mm dia 1.2 mtr long flexible tube and wall hook suitable for fixing to 15mm bore iron pipe complete all as specified. Make: Jaquar Cat No. ALD 577 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing CP jet spray with holder for EWC 1.5m long complete all as specified and directed

Supply and fixing toilet paper holder of chromium plated with flap fixed to walls and including chromium plated brass screws and wooden/ plastic cleats, approved quality complete all as specified. Make: Jaquar (Continental Accessories) Cat No. 1153N or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing single piece WC with UF seat cover, hinges, fixing accessories set, cistern fittings of size 355 x 655 x 760 with P/S trap including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc complete all as specified. Make: Jaquar Cat No. LYS-WHT-38851S or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing counter wash basin of size 420mm x 590mm x 195mm oval shaped complete all as specified and directed. Make : Jaquar Cat No. CNS-WHT-705 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Material and labour for 125 x 110mm PVC (SWR) gully trap setting and jointing with solvent cement fixed in repairs complete all as specified and directed.

Taking down carefully existing point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixutres such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawl plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Material and labour for point wiring for one light point controlled by one switch with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing surface/ concealed conduit and accessories and terminated in and including new sunk type pressed steel terminal switch boxes 1.6mm thick with plastic laminated bakelite sheet top cover 3mm thick fixed with nickel polished brass screws with washers and including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed.

All as per srl item No. 174.00 above but for one fan point controlled by one switch through regulator.

All as per srl item No. 174.00 above but for one socket outlet 5 Amps on independent board.

All as per srl item No. 174.00 above but for one socket outlet 5 Amps on same board with other switches.

All as per srl item No. 174.00 above but for one light point controlled by two way switches.

All as per srl item No. 174.00 above but for one bell point controlled by one bell push.

All as per srl item No. 174.00 here in before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified and directed.

Supply and fixing switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing socket out let 5 Amp, 5 pin flush type complete all as specified and directed.

Material and labour socket outlet multipurpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified and directed.

Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified and directed.

Supply and fixing batton holder ISI marked insulated body complete all as specified and directed.

Supply and fixing five step socket type fan regulator, electronic type, single phase, 300 watt, including connection complete after dismantling/ removing unserviceable regulator all as specified and directed.

Material and labour for sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and directed. Note: Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire through rigid PVC conduit shall be measured as one RM.

Supply and fixing in repairs sheet metal enclosure for DBs when MCBs to be used, SPN 8 ways 240 V, with 200 Amps rated bus bar, double door all as specified

Supply and fixing in repairs sheet metal enclosure for DBs when MCBs to be used, SPN 4 ways 240 V, with 200 Amps rated bus bar, double door all as specified

Material and labour in replacement MCB SP 5 to 32 Amps, 10 KA, C-curve complete all as specified and directed.

Material and labour in replacement MCB SPN 32 Amps, 10 KA, C-curve complete all as specified.

Material and labour in replacement MCB SPN 40 Amps, 10 KA, C-curve complete all as specified.

Supply and fixing in replacement Deco Ultra Slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 18/20 W LED 6000K complete all as specified and directed

Material and labour in replacement energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficiency electronic driver, having IP-65 protection, surge protection min 2 KV power factor more than 0.95 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India only including bracket made out of GI pipe 40mm dia 1.20m long bent to shape and clamp 40x6mm with nuts and bolts complete all as specified. Notes: (i) Contractor shall be provided 2 years written manufacturer's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited Laboratory from manufacturer.

Supply, laying, testing and commissioning of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor size 25 Sqmm 4 Core all as specified and directed

Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

All as per srl item No. 199.00 here-in-before but hard/ dense soil

All as per srl item No. 199.00 here-in-before but hard/ dense soil n.exc 1.5m wide & exc 1.5m but n.exc 3.0 in depth

Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed.

Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed. Note:- Ser item No 201.00 to 204.00 Some of the qty of these items have to be executed in highly restricted area (approx. 10 Km away from JRC), the rate may be quoted accordingly.

Material and labour sand for cushioning with 8cm thick layer before laying of cable and 15cm thick layer after laying of cable in trenches complete all as specified and directed.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/ abutting each other complete all as specified and directed.

Supply and fixing GI pipe light grade ISI marked of size 50mm bore for cable protection including provision of fitting along GI pipe along wall/ pole/ laid under the road/ floor complete all as specified.

Taking down and refixing ceiling fan of any sweep or make, filling cavities with filler one coat after cleaning, painting the complete fan (as per previous colour) using synthetic enamel paint by spraying including replacement of flexible wire, rubber reel, nut, bolts etc. and re-fixing in original position complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4 mm dia by means of nut, bolts, check nut & washer of galvanized iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3 mtr above ground level along pole fixed with two clamps of 25mm x 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No. 3 of SSR Part-I 2009 connected to earthing test point all as specified and directed and testing on completion inlcuding PCC (1:3:6) type C-1 cover and frame excavation and earth work etc complete all as specified.

Supply and fixing call bell, ding dong AC single phase, 230 volts including wooden/ PVC board of suitable size, connecting & testing complete all as specified and directed.

Material and labour in replacement bell push switch flush type 5 Amps, SP, 240 volts complete all as specified and directed.

Supply & fixing steel body exhaust fan, 380 mm sweep, 900 rpm, single phase, 23 volt, heavy duty, with lowered shutter including provision of three core flexible cable of required length of size 23/.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nut, bolt & washer, including making the hole in wall incl necessary civil/ plastering work to match the disturbed surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for energy saving & environmental friendly long life LED street light made up of pressure versalite die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP 65 protection and impact resistance of IK07 of capacity 30W LED 5700K complete all as specified and directed

SANDEEP JHANJI CONSTRUCTIONS

KULDEEP SINGH

NATIONAL BUILDERS

M/S Vinod Kumar

Motorway Constructions