Pre- Bid EOI Document for Selection of Channel Partner/Supplier/Authorized Distributor for Design, supply, installation, testing and commissioning of IP-MPLS routers

Supply of work station note book as per Technical Specifications. It also includes supply of Laser Printer (Only branded). The workstation should be capable of reconfiguring the system in case of any alteration in yard interlocking in future. Technical Specifications should be attached with the tender document by Tendering authority. Inspection: Consignee, Inspection charges: None, Payment terms: 100% after supply

CHAPTER 13

Description of Item

Supply of Digital Multimeter of Fluke 287 Industrial or superior True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 second. Inspection: Consignee, Inspection Charges: None, Payment Terms: 100% after Supply.

Supply of Professional AC/DC clamp meter 3 ¾ digit, true RMS measurement, for measurement of DC/AC currents up to 1000A, voltage up to 600V, resistance up to 40 M and frequency up to 1 MHz with set of leads & carrying case. Model - DCM 39A or equivalent/higher make Motwane/Stanlay/Fluke/Megger. Inspection: Consignee, Inspection Charges: None, Payment Terms: 100% after Supply.

Supply of Handheld Digital Earth Clamp Tester for clamp on earth/ground resistance measurement up to 1000 ohms. Accuracy 0.1 - 0.99: 1%, 1 - 49: 1.5%. Also measure current leakage up to 20A. No spines required for measurement. Model - DECT-2 or equivalent / higher version make Motwane/Stanlay/Fluke/Megger. Inspection: Consignee, Inspection Charges: None, Payment Terms: 100% after Supply.

Supply of Digital Cable Insulation Tester for measurement of cable insulation resistance with auto range 0-500 V DC. Motwani or from any reputed make. Inspection: Consignee, Inspection Charges: None, Payment Terms: 100% after Supply.

CHAPTER 15

Description of Item

Supply of Professional 19" Equipment Racks 12U for housing of network equipment. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution.

Supply of SMPS based Battery Chargers as per RDSO Spec for Telecom use 48 volts, 25 Amps in 2+1 configuration modules of 25 Amps with ultimate expandable capacity 50 Amps, automatic switching between the modules as per RDSO Spec No. RDSO/SPN/TC/23/1999 version 4 or latest along with two potential free contacts. Inspection: (i) RDSO if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

Supply of 48Volt/200AH maintenance free VRLA Batteries duly charged as per IRS Spec. No. S-93/96(A) with amendments-1 or latest Inspection: RDSO Inspection Charges: Borne by Railways. Payment Terms: 100% after Supply.

Supply of Laser source and Power meter. FOD make (Source FOD 2107 and Power meter FOD 1202) or similar. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of DLP trunk 80X50mm with required all changeable internal/external angle, changeable flat angle, flat junction. Clips, joint for cover, end cap etc. make Legrand or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of DLP trunk 32X20mm with required all changeable internal/external angle, changeable flat angle, flat junction. Clips, joint for cover, end cap etc. make Legrand or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply, complete wiring of optical fibre cable termination box for 6 fibres complete with base housing, base mountings with fixing arrangement etc. & splicing of fibre with low loss of pigtail cables. Splice losses in no case should be more than 0.1 dB. Necessary 0dB connectors should be provided in OFC termination box. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution.

Supply of single mode single fibre optical media converter supports wavelength division multiplexing (WDM) upto 20 KM, wavelength supported 1310 & 1550 nm, 10/100/1000(Giga) RJ-45, model- DIGISOL DG-MC6123S or similar. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Schedule B-NS ITEMS

SUPPLY AND INSTALLATION NS ITEMS

Description of Item

Supply of standard 19" rack mountable LER with minimum 60 Gbps full-duplex forwarding capacity or higher, 1+1 redundant control plane, 1+1 redundant field replaceable DC power supply to support 4x10G SFP+ ports (distributed in minimum two cards), 8x1G SFP ports distributed in minimum 2 cards of 4x1G, 4x1G copper ports for RJ45 SFP (distributed in minimum two cards), 16 E1 ( distributed in 2 cards of 2x8 or 1 card of 1x16 cards) CES interface (G.703), modules and optics covered separately. The LER should have sufficient and independent slots to support all required interfaces as per para B interface configuration of the RDSO TAN ver 3.0 or latest. The router should support all the software features, MTCTE certification, environmental standards, and security features as mentioned in RDSO technical document no. STT/TAN/IP-MPLS/2020 Ver 3.0 or latest. (Inspection: RDSO)

Supply of 4 port x 10G SFP module card distributed as 2 cards of 2 x 10G suitable for the IP- MPLS router in S.No.1(Inspection:RDSO)

Supply of 8 port x 1GbE (Distributed in minimum 2 card of 4x1GbE or 4 cards of 2x1GbE of optical ports) suitable for the IP-MPLS router in S.No.1(Inspection:RDSO)

The supply of a standard 19" Rack-Mountable LSR with 200 Gbps full-duplex forwarding capacity or higher, 1+1 redundant control plane, 1+1 redundant field replaceable DC power supply, 8x10G SFP+ ports (distributed in a minimum of two cards), upgradeable to 16x10G ports (in future), as per LSR to have sufficient and independent slots (As per para B part 3 of RDSO TAN ver 3.0 to support all the required interfaces), modules and optics covered separately. The router should support all the software features, MTCTE Certification, Environmental standards, and Security features as mentioned in RDSO technical document no STT/TAN/IP-MPLS/2020 Ver 3.0 or latest. (Inspection: RDSO)

Supply of 8x10Gbps distributed in minimum 4 x 10G (two modules) SFP module card suitable for the IP- MPLS routers in Sr. no 4. (Inspection : RDSO)

Supply of 16 port E1 Card (Distributed in 2 cards of 2x8 Port or one card of 1x16 port ) along with Patch panel/Krone Module and wiring for Routers with all accessories etc as per technical specification.(Inspection:RDSO)

Supply of SFP+ 10G (40 Km) 1550nm, suitable for 40 km transmission and capable of operating on single or dual fiber as per site requirements for LSR/LER. (Inspection: RITES/Third Party Agency)

Supply of LC/FC, FCPC/SCPC, etc., OFC patch cords (10 meters long) as per site requirements, suitable for OFC terminations and the IP MPLS equipment supplied. (Inspection: Consignee)

DATARACK 42U Rack Enclosures Networking/Server Rack Size of Server Rack Enclosure -42U, Depth of the Rack(mm) -Upto 1000, Load Bearing Capacity - 1000 kilogram Weight - 80 Kilogram, Both rear and front doors with Perforation,Side Panels With Key Locks and Slam Latch,Secure Locks,Rear split door design,Keyboard Tray Sliding and Rotary, Shelf For CRT/TFT Display, Cable channel in rear side for cable management,Warranty - 1 Years. (Inspection: Consignee)

Supply of 10/100/1000 Base-T Copper Ethernet Transceiver SFP module, along with all accessories. (Inspection: RITES/Third Party Agency)

Supply of 55 inch UHD monitor 4K with minimum specification are as under: Display Size: 55 inch, Screen Type: LED, Smart TV: YES, Resolution Standard: 4K, Resolution (pixels): 3840x2160, No of HDMI Port: 2 or more, No of USB Port: 2 latest or more,. Built in Wi-Fi: YES, Ethernet (RJ45): 1 or more, with wall mount accessories, Analog Audio Input: YES, Speaker Output RMS: 20 W or higher, Remote: YES Android App support, Operating System Present: Android,. Screen Mirroring: YES, Supported Video Formats: MPEG1/MPEG2TS/AVCHD/MP4/AVI/WMV/LPCM/MP3/WMA/JPEG or any other Accepted Make: LG/Samsung/Sony. (Inspection: Consignee)

Supply of 1G SFP Module with 20 Km range with all accessories for the above IPMPLS routers. Inspection RITES.

Supply of eMS/NMS as per RDSO specification no. STT/TAN/IP-MPLS/2020 Ver 3.0 (RDSO letter RDSO-TELE0LKO(TECH)/8/2020-Telecom Directorate/RDSO dated 18.06.2025), with features and functional requirements as specified in Clause G of the RDSO TAN ver 3.0 or the latest version. This is for the Zonal/Divisional HQ NOC and includes an active and standby system hardware along with a UPS providing 1-hour backup. The eMS/NMS must be from the same OEM as the LER-LSR IP MPLS being supplied, with six monitoring terminals provided as per the hardware specifications of the workstation mentioned in the RDSO TAN ver 3.0 or latest. The system should be capable of accessing and providing services for all the nodes and physical entitites like L2 and L3 switches of the network. (Inspection: RDSO)

Laser Colour Computer Printers for A3 paper size, as per technical specifications attached in subject tender Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply

Supply of SFP full duplex with range upto 80 KM suitable for 10G Port along with all accessories. (Inspection RITES)

Supply of a standard 19-inch rack-mountable Layer-3 managed switch with 24 SFP ports, a redundant DC power supply or AC+DC power supply, and a dedicated uplink module with 4 x 10 SFP+ ports for uplink. The switch should include 4 Nos of 1 GE SFP modules and comply with RDSO Specification No. RDSO/SPN/TC/83/2020 Rev 2 or the latest version. A mounting kit with all necessary accessories must be supplied, and all ports should be fully populated with SFP modules. The switch should be Trusted Telecom product as per TTP policy. (Inspection: RDSO)

Supply of a multifunction device with print, scan, copy, fax, and email capabilities. The device should be of type-color, laser, Wi-Fi enabled, and equipped with a gigabit network port and duplex ADF scanning. It should feature a 10.9 cm (4.3") intuitive touchscreen color display (CGD). The model specified is HP Color Jet Pro MFP M477fnw or a similar model. (Inspection: Consignee)

Supply of a 19'' 42U 1200mm depth telecom rack with standard accessories (closed type) featuring a front glass door. All doors should be of the removable type. (Inspection: RITES/Third Party Agency)

Supply of Workstation PC as per TS. Inspection : Consignee.

Supply of Channelised 2 Nos of 4 port X 10Gbps WDM interface module card suitable for the above LER Routers with 2 nos of SFP's (1.2Gbps or 2.5Gbps) as per the site requirement or as per instructions of engineer Incharge. Inspection By RDSO.

Supply of Layer-2 managed Switch (24 ports 10/100/1000 BASE- Tports, 4x 1G SFP+ ports). The switch should be Trusted Telecom product as per TTP policy. Inspection: RDSO Inspection