Loading
Loading…
Loading…
Tender Value
₹2.2 Cr
EMD Value
₹4.4 L
Closing Date
15 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GENERAL
15 conditions · 4 needing a document upload
(As per advance correction slip No.1 of GCC April 2022) The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of GCC-April-2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Annexure V :- As per Clause 6.1 Part-1 of GCC- The tenderer shall submit a copy of certificate (Enclosed as Annexure-V) stating that all their statements/documents submitted alongwith bid are true and factual. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid.
The minimum Eligibility Criteria: for costing more than 50 lakhs :- Applicable. 10. Eligibility Criteria: 10.1 Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b (1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution
Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. 10.1Definition of similar works : The criteria for similar nature of work for said tender is given below as CEE/JBP's L. No. WCR/L/10/Similar Nature/3689, dtd. 11.04.2012. similar nature of work criterion for Electrical General Service (GS) for Electrification work in Electrical department of WCR shall include works executed with Central Government, Semi Government/PSUs of Central Government and/or State Governments have been defined as under :- (A)The level of skills required in following work of electrification is almost same. (a) Electrification of service buildings. (b) Electrification of staff quarters, offices. (c) Electrification of offices. (d) Electrification of road & colony lighting. (e) Electrification of circulating area lighting. (f) Erection & commissioning of LT, HT upto 33 kV overhead mains. (g) Sub-station installations & commissioning. (h) Electrification of washing pits, Sheds & Workshops etc. (i) Any above work or combination of (a) to (h) above.
30 conditions · 3 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no.2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017 and amendments/ revisions thereof.
Additional 5% PG to be submitted if tender awarded more than 5% below (Ref : para-4 of Rly. Bd. L.No.2022|CE-UCTIGCC- 2022[POLICY/Pt.I (E-3320424), Dated 13.03.2026
Rewiring of Staff Quarters and Provision of Additional Electrical points in existing staff quarters including improvement of supply system of Tuglakabad (TKD) railway colony and in various section of kota division.
EL-50-320R-2026-27
EL-50-320R-2026-27
Open
Works - General
6 Months
Kota, Rajasthan
₹0
₹4.4 L
15 Jul 2026
22 Jun 2026
1 Jul 2026
147 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,22,45,627.43 | ||
| — | 3871.00 | — | — | ||
| Supply, installation, testing & commissioning of concealed wiring of light/Fan/Bell points in PVC rigid conduit pipe size 25mm dia medium class minimum thickness approx. 1.6mm to 1.8mm of ISI mark with 1.5 sq.mm. multistrand PVC insulated copper conductor cable confirming to IS:694-1990 or latest with one holder/ceiling rose on junction box with round plate with 2.5 sq.mm. PVC insulated copper wire green coloured for earthing along with connection etc. including stone wall cutting, replaster, painting and other civil work | — | — | — | 15,02,025.42 | |
| — | 20960.00 | — | — | ||
| Supply of material for concealed wiring of sub main phase & neutral in PVC rigid conduit pipe size 25mm dia medium class minimum thickness approx. 1.6mm to 1.8mm of ISI mark with 4 sq.mm. PVC insulated single core multistrand copper cable with 2.5 sq.mm. PVC insulated copper wire green coloured for earthing & connection etc. Separate PVC pipe to be provided for this item. including stone wall cutting, replaster, painting and other civil work | — | — | — | 26,42,217.6 | |
| — | 20960.00 | — | — | ||
| Erection, testing & commissioning of concealed wiring of sub main phase & neutral in PVC rigid conduit pipe size 25mm dia medium class minimum thickness approx. 1.6mm to 1.8mm of ISI mark with 4 sq.mm. PVC insulated single core multistrand copper cable with 2.5 sq.mm. PVC insulated copper wire green coloured for earthing & connection etc. Separate PVC pipe to be provided for this item. including stone wall cutting, replaster, painting and other civil work | — | — | — | 20,11,112 | |
| — | 840.00 | — | — | ||
| Supply of material, wiring, testing & commissioning of light /fan/Bell point in PVC casing caping size 38/40mm, ISI mark with 1.5 sq.mm. multistrand PVC insulated unsheathed copper cable with 2.5 sq.mm. PVC insulated stranded copper wire green colour for earthing with connection etc. including stone wall cutting, replaster, painting and other civil work | — | — | — | 3,33,580.8 | |
| — | 4650.00 | — | — | ||
| Supply of material for wiring of sub main phase and neutral in PVC casing caping 25 mm. with 4 mm² single core multistrand copper cable and 2.5 sq.mm PVC insulated copper stranded green colour wire for earthing along with wiring and connections Note- (i) Separate PVC casing caping to be provided for this item. (ii) All material needed for this item are to be supplied by the contractor. including stone wall cutting, replaster, painting and other civil work | — | — | — | 6,76,063.5 | |
| — | 4650.00 | — | — | ||
| Erection & wiring of sub main phase and neutral in PVC casing caping 25 mm. with 4 mm² single core multistrand copper cable and 2.5 sq.mm PVC insulated copper stranded green colour wire for earthing along with wiring and connections Note- (i) Separate PVC casing caping to be provided for this item. (ii) All material needed for this item are to be supplied by the contractor including stone wall cutting, replaster, painting and other civil work | — | — | — | 89,233.5 | |
| — | 100.00 | — | — | ||
| Wiring of light point in PVC rigid conduit pipe size 19/20mm medium class minimum thickness 1.4 mm of ISI mark with 1.5 sq.mm. multistrand PVC insulated copper cable and 2.5 sq.mm. PVC insulated copper wire green coloured for earthing with connections etc. (The light point length 3.5 to 7.0 Mtr.) | — | — | — | 86,821 | |
| — | 100.00 | — | — | ||
| Wiring of light point in PVC rigid conduit pipe size 19/20mm medium class minimum thickness 1.4 mm of ISI mark with 1.5 sq.mm. multistrand PVC insulated copper cable and 2.5 sq.mm. PVC insulated copper wire green coloured for earthing with connections etc. (The light point length7 to 11.0 Mtr. ) | — | — | — | 1,14,293 | |
| — | 6199.00 | — | — | ||
| Supply of S.P. switch 6 / 10 Amp. one way (1-Module). | — | — | — | 7,61,547.15 | |
| — | 6199.00 | — | — | ||
| Erection & fixing of S.P. switch 6 / 10 Amp. one way (1-Module). | — | — | — | 1,03,771.26 | |
| — | 1488.00 | — | — | ||
| Supply of 6 Amp. 5-pin socket (2-Module). | — | — | — | 2,78,851.2 | |
| — | 1488.00 | — | — | ||
| Erection & fixing of 6 Amp. 5-pin socket (2-Module). | — | — | — | 34,462.08 | |
| — | 561.00 | — | — | ||
| Supply of fan regulator 5-step (2-Module) used for concealed modular wiring. | — | — | — | 3,90,899.19 | |
| — | 561.00 | — | — | ||
| Erection & fixing of fan regulator 5-step (2-Module) used for concealed modular wiring. | — | — | — | 20,571.87 | |
| — | 2378.00 | — | — | ||
| Supply of blank plates (1-Module) used for concealed modular wiring. | — | — | — | 73,551.54 | |
| — | 2378.00 | — | — | ||
| Erection & fixing of blank plates (1-Module) used for concealed modular wiring. | — | — | — | 8,132.76 | |
| — | 1548.00 | — | — | ||
| Supply of S.P. switch 16 Amp. one way (1-Module) used for concealed modular wiring. | — | — | — | 3,26,875.68 | |
| — | 1548.00 | — | — | ||
| Erection & fixing of S.P. switch 16 Amp. one way (1-Module) used for concealed modular wiring. | — | — | — | 28,390.32 | |
| — | 1548.00 | — | — | ||
| Supply of 6/16 Amp. 6-pin combined shuttered socket (2-Module) used for concealed modular wiring. | — | — | — | 4,30,266.6 | |
| — | 1548.00 | — | — | ||
| Erection & fixing of 6/16 Amp. 6-pin combined shuttered socket (2-Module) used for concealed modular wiring. | — | — | — | 58,669.2 | |
| — | 553.00 | — | — | ||
| Supply of flush metal box of 12-Module with connection used for concealed modular flush metal box wiring. | — | — | — | 1,45,925.64 | |
| — | 553.00 | — | — | ||
| Erection & fixing of flush metal box of 12-Module with connection used for concealed modular flush metal box wiring. | — | — | — | 23,751.35 | |
| — | 553.00 | — | — | ||
| Supply of plate Inner & Outer 12-Module used for concealed modular wiring. | — | — | — | 1,55,536.78 | |
| — | 553.00 | — | — | ||
| Erection & fixing of plate Inner & Outer 12-Module used for concealed modular wiring. | — | — | — | 17,281.25 | |
| — | 359.00 | — | — | ||
| Supply of flush metal box of 6-Module with connection used for concealed modular flush metal box wiring. | — | — | — | 74,158.63 | |
| — | 359.00 | — | — | ||
| Erection & fixing of flush metal box of 6-Module with connection used for concealed modular flush metal box wiring. | — | — | — | 9,161.68 | |
| — | 359.00 | — | — | ||
| Supply of plate Inner & Outer 6-Module used for concealed modular wiring. | — | — | — | 1,50,514.34 | |
| — | 359.00 | — | — | ||
| Erection & fixing of plate Inner & Outer 6-Module used for concealed modular wiring. | — | — | — | 13,085.55 | |
| — | 1308.00 | — | — | ||
| Supply of flush metal box of 4-Module with connection used for concealed modular flush metal box wiring. | — | — | — | 1,69,621.44 | |
| — | 1308.00 | — | — | ||
| Erection & fixing of flush metal box of 4-Module with connection used for concealed modular flush metal box wiring. | — | — | — | 27,611.88 | |
| — | 1308.00 | — | — | ||
| Supply of plate Inner & Outer 4-Module used for concealed modular wiring. | — | — | — | 3,55,736.76 | |
| — | 1308.00 | — | — | ||
| Erection & fixing of plate Inner & Outer 4-Module used for concealed modular wiring. | — | — | — | 43,961.88 | |
| — | 284.00 | — | — | ||
| Supply of flush metal box of 2-Module with connection used for concealed modular flush metal box wiring. | — | — | — | 19,936.8 | |
| — | 284.00 | — | — | ||
| Erection & fixing of flush metal box of 2-Module with connection used for concealed modular flush metal box wiring. | — | — | — | 3,246.12 | |
| — | 284.00 | — | — | ||
| Supply of plate Inner & Outer 2-Module used for concealed modular wiring. | — | — | — | 41,560.56 | |
| — | 284.00 | — | — | ||
| Erection & fixing of plate Inner & Outer 2-Module used for concealed modular wiring. | — | — | — | 5,134.72 | |
| — | 120.00 | — | — | ||
| Supply of material & fixing of Surface type PVC board of 12-Module with connection used for PVC casing caping wiring. | — | — | — | 18,566.4 | |
| — | 60.00 | — | — | ||
| Supply of material & fixing of Surface type PVC board of 6-Module with connection used for PVC casing caping wiring. | — | — | — | 6,044.4 | |
| — | 270.00 | — | — | ||
| Supply of material & fixing of Surface type PVC board of 4-Module with connection used for PVC casing caping wiring. | — | — | — | 20,725.2 | |
| — | 260.00 | — | — | ||
| Supply of material & fixing of Surface type PVC board of 2-Module with connection used for PVC casing caping / PVC rigid conduit pipe wiring. | — | — | — | 16,216.2 | |
| — | 30.00 | — | — | ||
| Supply of materials of main distribution box 10 way suitable for housing MCB and ELCB with copper busbar and neutral link. Distribution box should be fixed on wooden taper plug or steel fasteners etc. with providing and fixing of 01 no. MCB DP 32 Amp. breaking capacity 6 KA and 06 Nos. MCB SP 6-32 Amp. breaking capacity 6 KA with 01 No. ELCB 40 Amp. DP, sensitivity 100 m. Amp. and connections etc. The distribution board is to be fixed on wall with the help of rag bolt /fastener or on board and connecting the same with suitable size of wire duly crimped lugs. | — | — | — | 1,48,715.4 | |
| — | 30.00 | — | — | ||
| Erection and fixing of main distribution box 10 way suitable for housing MCB and ELCB with copper busbar and neutral link. Distribution box should be fixed on wooden taper plug or steel fasteners etc. with providing and fixing of 01 no. MCB DP 32 Amp. breaking capacity 6 KA and 06 Nos. MCB SP 6-32 Amp. breaking capacity 6 KA with 01 No. ELCB 40 Amp. DP, sensitivity 100 m. Amp. and connections etc. The distribution board is to be fixed on wall with the help of rag bolt /fastener or on board and connecting the same with suitable size of wire duly crimped lugs. | — | — | — | 16,551 | |
| — | 172.00 | — | — | ||
| Dismantling of old Wiring, L. P/F. P/fittings/boards etc & depositing to Concern Rly. Store. | — | — | — | 62,573.6 | |
| — | 132.00 | — | — | ||
| Supply of material & providing GI. pipe earthing arrangement by digging the pit as per DRM/KTT's Drg. No. 01913EL/R1 or latest complete in all type of soils including rocky area. Earth value will be taken by the contractor in the presence of Railway representative and written on the earth pit by the contractor. | — | — | — | 3,73,119.12 | |
| — | 456.00 | — | — | ||
| Supply of 2 Module Surface Mounting Modular Box with Plate with 16 Amps. Modular MCB Double Pole 4.5 KA C-Curve - 01 No. | — | — | — | 2,58,137.04 | |
| — | 456.00 | — | — | ||
| Erection & fixing of 2 Module Surface Mounting Modular Box with Plate with 16 Amps. Modular MCB Double Pole 4.5 KA C-Curve - 01 No. | — | — | — | 21,878.88 | |
| — | 61.00 | — | — | ||
| Supply of material & fixing of service pipe 'B' class G.I. 25 mm. dia 3 meters long complete with G.I bend, painted MS clamps of 40x6 mm flat, stay wire, stay insulators and fixing of 2 nos. MS clamp on rigid support or reg bolts, washer & nuts as per Drg. No. Ktt/01624/EL or latest. One no. MS Clamp to be provided for binding of LT armoured cable. | — | — | — | 42,124.16 | |
| — | 450.00 | — | — | ||
| Supply of material of service main with 2 core 10 sq.mm. ISI marked XLPE cable size 2 core 10 sq.mm. aluminum conductor with connection etc. | — | — | — | 49,050 | |
| — | 450.00 | — | — | ||
| Erection of service main with 2 core 10 sq.mm. ISI marked XLPE cable size 2 core 10 sq.mm. aluminum conductor with connection etc. | — | — | — | 4,320 | |
| — | 531.00 | — | — | ||
| Supply of MCB Modular SP 20/25Amp. | — | — | — | 2,13,982.38 | |
| — | 531.00 | — | — | ||
| Erection & fixing of MCB Modular SP 20/25Amp. | — | — | — | 15,287.49 | |
| — | 531.00 | — | — | ||
| Supply of Metal Clad Plug and Socket box 250volt. | — | — | — | 3,05,691.39 | |
| — | 531.00 | — | — | ||
| Erection & fixing of Metal Clad Plug and Socket box 250volt. | — | — | — | 25,477.38 | |
| — | 561.00 | — | — | ||
| Supply of BEE 5 star rated energy efficient BLDC ceiling fan, sweep size: 1200 mm with Modular Electronic Regulator with wiring connection etc as per attached detailed technical specification. | — | — | — | 15,12,949.68 | |
| — | 561.00 | — | — | ||
| Erection and fixing of BEE 5 star rated energy efficient BLDC ceiling fan, sweep size: 1200 mm with Modular Electronic Regulator with wiring connection etc as per attached detailed technical specification. | — | — | — | 1,12,200 | |
| — | 359.00 | — | — | ||
| Supply and Fixing of TV cable point in pvc rigid conduit pipe 25 mm 3 to 5 mtr. Long with cable and connection socket. | — | — | — | 1,47,419.76 | |
| — | 172.00 | — | — | ||
| Supply and fixing of telephone connection point in pvc rigid conduit pipe 25 mm 1 to 5 mtr. Long with connection wire and connection socket. | — | — | — | 49,441.4 | |
| — | 3780.00 | — | — | ||
| Laying, testing & commissioning of ISI marked LT XLPE cable of aluminum conductor 1100 volt with connection etc. (Note: Cable will be supplied by railway). | — | — | — | 96,238.8 | |
| — | 172.00 | — | — | ||
| Supply of material, providing and laying of RCC hume pipe 6" dia (150mm) as per IS: 456-1978 or latest in existing trench under Railway track including jointing and all required accessories etc. | — | — | — | 85,110.76 | |
| — | 344.00 | — | — | ||
| Supply, laying, fixing of heavy-duty ISI marked B class GI pipe of 3.65 mm wall thickness & 50 mm diameter to be laid along the wall or floor with proper galvanized clamp through the wall or underneath the floor in cement concrete. | — | — | — | 1,42,202.72 | |
| — | 703.00 | — | — | ||
| Supply of LED tube light Box type Luminaire 20 watt complete with tube suitable for 230 V AC. | — | — | — | 2,28,179.74 | |
| — | 703.00 | — | — | ||
| Fixing, Testing & Commissioning of LED tube light Box type Luminaire 20 watt complete with tube suitable for 230 V AC. | — | — | — | 35,150 | |
| — | 516.00 | — | — | ||
| Supply of exhaust fan sweep size 300 mm suitable for 230volt AC,50HZ complete with accessories. | — | — | — | 5,96,305.08 | |
| — | 516.00 | — | — | ||
| Fixing, testing & commissioning of exhaust fan sweep size 300 mm suitable for 230volt AC,50HZ complete with accessories. | — | — | — | 49,763.04 | |
| — | 142.00 | — | — | ||
| Supply of ISI mark AC Three Phase Energy Meter. | — | — | — | 3,77,769.7 | |
| — | 142.00 | — | — | ||
| Erections of ISI mark AC Three Phase Energy Meter. | — | — | — | 21,342.6 | |
| — | 142.00 | — | — | ||
| Supply of PVC Box for fixing of three phase electric energy meter with sealing arrangement. The PVC box is to be fixed on wall with the help of rag bolt /fastener/ray roll plug or on board. | — | — | — | 1,49,399.62 | |
| — | 142.00 | — | — | ||
| Erections of PVC Box for fixing of three phase electric energy meter with sealing arrangement. The PVC box is to be fixed on wall with the help of rag bolt /fastener/ray roll plug or on board. | — | — | — | 21,342.6 | |
| — | 142.00 | — | — | ||
| Supply of SDB for light and fan. TPN DB 4-way (8+12) IP-43 with metal door, with ELCB, RCCB 32A TPN incomer and outgoing having 5 x 10A SPMCB and 5 x 6A SPMCB MCB. | — | — | — | 5,94,088.24 | |
| — | 142.00 | — | — | ||
| Erection and fixing of SDB for light and fan. TPN DB 4-way (8+12) IP-43 with metal door, with ELCB, RCCB 32A TPN incomer and outgoing having 5 x 10A SPMCB and 5 x 6A SPMCB MCB. | — | — | — | 1,33,613.48 | |
| — | 142.00 | — | — | ||
| Supply of SDB for Power. TPN DB 4-way (8+12) IP-43 with metal door, with ELCB, RCCB 63A TPN incomer and outgoing having 5 x 32ASPMCB and 5 x 20/16A SP MCB. | — | — | — | 6,56,544.1 | |
| — | 142.00 | — | — | ||
| Erection and fixing of SDB for Power. TPN DB 4-way (8+12) IP-43 with metal door, with ELCB, RCCB 63A TPN incomer and outgoing having 5 x 32ASPMCB and 5 x 20/16A SP MCB. | — | — | — | 1,47,610.42 | |
| — | 36.00 | — | — | ||
| Supply, Installation, fabrication, testing & commissioning of LT Distribution panel Enclosure 16 Gauge fabricated with MS angle Size 1575X1200X400 mm (HXWXD) approx. with door and locking arrangement duly painted red oxide and power coated enamel paint consisting of following items - INCOMING CIRCUIT- 01 No. MCCB 4 pole 160 Amp. 25 KA TM Release, Type: DN1- 250C, 415V AC, 50 HZ. Ampere meter with selector switches -01 no., voltmeter with selector switch - 01 no., indication lamp RYB 03 nos., Changeover Onload Manual 160 Amp. 04 Pole 01 no. with indicator 02 no., CT 150/5A 15VA- 03 nos., Copper busbar Main 200 Amp. rating- 01 set & Earth 200 Amp. - 01 Set, MCB 6A SP C 10KA - 04 nos. OUTGOING CIRCUIT- TM Release 04 no. MCCB 4 pole 63 Amp. 25 KA. All MCCB in incoming and outgoing circuit will be provided with Extended Rotary Handle and Spreader Terminals - 4 Pole (Set of 8) etc. as per attached detailed specification. | — | — | — | 42,62,934.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Clarification for Annexure V
ATTACHMENT
GCC_April-2022_Final.pdf
ATTACHMENT
Annexure of LC
ATTACHMENT
MakeinIndiapolicylatestamendment.pdf Make in India Policy
ATTACHMENT
Tender Document
ATTACHMENT
Technical Specifications of LED
ATTACHMENT
GCCAdvanceCorrectionSlipNo11.pdf
ATTACHMENT
Annexure-E.pdf
ATTACHMENT
DempoymentofEngineers.pdf
ATTACHMENT
CorrectionslipofGCC.pdf
ATTACHMENT
AnnexureLC-Inclusionofletterofcredit.pdf
ATTACHMENT
Clarification-Annexure-VofGCCwithTenders..pdf
ATTACHMENT
SpecificationofLEDLuminare-2026-1.pdf
ATTACHMENT
MakeinIndiapolicylatestamendment.pdf
ATTACHMENT
TenderSch.EL50-320R2026-27RewiringofstaffQuaters_2.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .