REPAIR REPLACEMENT TO JOINERY WORKS INCLUDING PARTITIONS FALSE CEILING ACP WORKS AND OTHER CONNECTED WORKS IN BUILDINGS OF AREA E AND DAS AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE(I) DM VISAKHAPATNAM

Taking down chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but n exc 4.00 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and directed.

S&F plain, solid, 2nd hard wood class straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with the glue pinned at joints as in doors and windows with 2nd class hardwood complete all as specified and directed.

S&F flush shutters, solid core construction 30 mm thick with block board core and plywood face panels, commercial type with both side decorative face veneer with lipping/frame to match all as specified and directed. Note: The rates for flush shutters include for provision of suitable blocks for taking mortice locks, latches or other fittings.

S&F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 178 of SSR Part -II complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. square tube for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm wide stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in M.S. frame welded /sealed to the stiles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing of page no 174 of SSR Part -II complete all as specified and directed.

S&F powder coated Aluminium window frame two track outer frame 62.0 mm x 31.5 mm x1.50 mm and guide rail of section Nos size 62 x 31.5mm x1.50mm and shutter section (i) vertical section & interlock section:- 38 x 20 x 1.50 mm, (ii) Top/Bottom section:-41 x 20 x 1.5mm sliding type including 4.0mm thick coloured tinted glass of selected quality and fixed with rubber beading,complete and aluminium hardware fittings including taking down existing one complete all as specified and directed.

S&F powder coated Aluminium window frame Three track outer frame 92.36 mm x 29.70 mm x1.50 mm and guide rail of section Nos size 92.36 x 29.70 x1.50mm and shutter section (i) vertical section & interlock section:- 38 x 20 x 1.50 mm, (ii) Top/Bottom section:-41 x 20 x 1.5mm sliding type including 4.0mm thick coloured tinted glass of selected quality and fixed with rubber beading, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless wire staples complete and aluminium hardware fittings including taking down existing one complete all as specified and directed.