Supply Installation and Commissioning of FRP based Prefabricated Biotoilet for Ladies and Gents in CMPDI Regional Institute V Bilaspur CG FY202526 2nd Call

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of the soil

Supplying and filling in plinth with locally available sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Brick work with clay flyash F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)

15 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia .Pipes

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).

Lettering with black Japan paint of approved brand and manufacture

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Providing and fixing ball valve (brass) of approved quality complete :High or low pressure with plastic floats:25 mm nominal bore

Supplying installation and commissioning of rectangular model FRP prefabricated gents toilet of size: 8' x 6' x 8' with structure of heavy steel framework walls of 5 mm thick FRP panels with good quality emulsion matt embedded with ventilator and necessary partition for privacy as per manufacturers specifications with 1 year warranty against the manufacturing defects. Specifications: a) 1 no. western commode conforming to IS 2556 (Part-1) and 2556 (Part-2) with flush tank. b) 2 nos.Urinal pot with flush valve as per IS specification. c) 1 No. of Washbasin of required make as per IS specifications. d) 1 No. overhead water tank of 1000 litre. capacity. e) Inclusive of all electric fittings with sufficient electric points and all necessary plumbing fittings as per IS specifications complete for inlet/outlet of water/waste water system. f) 2250 litres FRP based biodigester tank common for ladies and gents toilet. ( Rate is inclusive of loading unloading transportation and erection at site complete).

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.5 degree 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.shoe(plain)110mm

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information