Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹8.3 LAdmitted-Finance WZ 66 SRI NAGAR RANI BAGH NORTH WEST DELHI DELHI 110034 | NORTH WEST DELHI | DELHI | 110034 | -38.08% | ₹8.3 L | L1 | Admitted-Finance |
| 2 | L2₹9.1 LAdmitted-Finance | -32.23% | ₹9.1 L | L2 | Admitted-Finance |
| 3 | L3₹9.6 LAdmitted-Finance | -28.90% | ₹9.6 L | L3 | Admitted-Finance |
| 4 | L4₹13.4 LAdmitted-Finance | -0.55% | ₹13.4 L | L4 | Admitted-Finance |
| 5 | Rejected-Technical | - | - | - | Rejected-Technical Not Qualified |
Tender Value
₹13.5 L
EMD Value
₹26,912
Closing Date
5 Feb 2026, 3:00 pmClosed
Executive Engineer (E)
O/o EE/ELD-8/DDA, 21st floor Vikas Minar.
Sh-Repairing / Rewiring of existing installation and supply / installation of light / power point, additional fittings and electrical fixtures at recently alloted officer flats at B.D.Road.
2026_DDA_896296_1
34/EE/ELD-8/DDA/2025-26
Open Tender
Electrical Works
120 days
Vikas Minar
Please refer Tender documents.
9 documents required · 9 mandatory
₹0
₹26,912
23 Feb 2026
30 Jan 2026
6 Feb 2026
30 Jan 2026
5 Feb 2026
30 Jan 2026
Supply and fixing following piano type switch/socket on the existing switch box/cover including connection etc. as required.
5/6 amp switch
3 pin 5/6 Amp socket outlet.
15/16 Amp switch
6 pin 15/16 Amp socket outlet.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but exciuding modular plate etc as requried.
5/6 amps switch
3 pin 5/6 Amp socket outlet.
15/16 amp switch
6 pin 15/16 Amp socket outlet.
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as reqd.
3 module (100mm x 75mm)
4 module (125mm x 75mm)
6 module (200mm x75mm)
8 moudle (125 x125mm
12 module(200mm x 150mm)
wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group-B)
Supplying and drawing the following sizes of FRLS PVC insulated copper conductor single core cable in existing surface / recessed steel/ PVC conduit as required.
3 X 1.5sq mm
Wiring for light / power plug with 2 X 4 sq. mm FRLS PVC insulated, copper conductor, single core cable, in surface / recessed PVC conduit along with 1 No 4 sq. mm FR PVC insulated, copper conductor, single core cable for loop earthing as required.
Supply & fixing of following sizes of medium class PVC batten conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.
Supplying and fixing suitable size PVC power box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc as required.
Supplying and fixing of two module stepped type electronic fan regulator on the existing modular plate switch box,including connections excluding moduler plate etc as reqd.
Supplying and fixing 5 amps. To 32 Amps. Rating, 240/415 Volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
Single pole and neutral
Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)
Supply & replacement of (from deputed labour), Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with driver efficiency >85%, Operating voltage AC 140 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED,Driver& electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K 46 DELHI SCHEDULE OF RATE (E&M) 2025(As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). along with buyback of old fittings.
10 Watt LED batten
Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) 18- 22 Watt
Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per equirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim. 18 watt
Supplying & fixing of decorative wall light with 01 No. white glass diffuser & 01 no. 9 watt LED lamp i/c testing , commissioning etc. complete as required. As per the direction of engineer-in-charge.
Supplying & fixing of minimum 10 watt LED premium quality diffuser bulk head i/c PDC housing LED Bulkhead luminaire with opal diffuser, equipped with 2KV in-uild surge protection with IP65 pretection rating i/c connection testing etc. complete as reqd.
Supplying and installation of 400 mm sweep size wall mounted fan and providing clamp on wall including connection etc complete as required.
Supplying and installation of 250 mm sweep size ventilation fan of plastic body in the existing opening, including connection etc complete as reqd.
Supplying and installation of 300 mm sweep heavy duty 1400 rpm exhaust fan i/c connections etc. complete as required.
Supplying & Installation of 20 watt LED Mirror light having CRCA sheet housing, powder coated, front strp made of stainless steel & acrylic diffuser i/c testing, commissioning etc. complete as required.
Supply and fixing of following size of Flat plugtop white i/c connection testing etc. complete as required.
Supplying and replacement of following size of capacitor i/c connection, testing etc as required
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.81 MB
TenderDoc34.pdf
Tender Documents • 2.53 MB
BOQ_942082.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid