CA NO CWE BLY/GE(W)/42 OF 2023-24 PROVN OF STANDBY HT CABLE FOR LOKHART LINE AREA AND JLA AREA AND ALLIED WORK AND ABTs METER AT 33 KV MRS UNDER GE (WEST) BAREILLY

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in Soft/loose soil for laying of LT UG cables/base for Pole etc complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for sand cushioning laid in trenches for laying of LT/HT UG cablescomplete all as specified and directed.

Supply and laying unreinforced precast concrete cable cover, class HVP, Type 1 with peak ,size 300mm x 180mm x40 mm complete all as specified and directed.

S & F GI pipe light grade 80mm bore with and including necessary fittings for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc complete all as specified and directed.

Supply ,Laying and testing XLPE insulated screened PVC bedded ,galvenized steel strip or wire armoured ,electric power cable (heavy Duty) with stranded Aluminium conductor ,11000 volt Grade of size 95 sqmm 3 corecomplete all as specified and directed.

Material and labour for PCC 1:3:6 type C-2,using stone aggregate 40mm graded as in foundation of stays and coping of poles including necessary form work where required and fair finish to the exposed surfaces including demolition of existing PCC complete all as specified and directed.

Making horizontal bore hole under road up 100mm bore size at the depth not less than 1 mtr below ground level for passing of HT underground cable complete all as specified and directed.

Supply, fixing, testing and commissioning of heat shrink end jointing kit suitable for HT cable of size up to 95 Sqmm, XLPE insulated, PVC sheathed armoured 11000 volts grad complete all as specified and directed.

Supply, Installation, testing and commissioning of SCADA Competible 3 Phase-4W ABT Meter ACC 02S, 1Aor/1A-110V in confirmaton to Discom/UPPTCL/SLDC complete with sofware, MRI Instrument and all accessories along with required cabling for connection and meter cubical etc all complete all specified and directed. Note:- (i) All necessary liasen for testing, installation, Joint sealing for transmission distribution to be carried out by contractor and cost of the same shall be included in the unit rate quoted by bidder. (ii) Making Connection of SCADA Cable and cost of the same shall be included in the unit rate quoted by bidder..

RAMAPATI ENGINEERING SERVICES

D K THUKRAL AND SONS

VINYAK TRADERS

NOORI ELECTRIC ENGINEERING WORKS

HUMERS INFRATECH