Shifting of line and S/S from Chandrabhaga junction towards Chandrabhaga beach cafe due to development of Puri-Konark beach front under electrical section , Konark Puri.

33KV DP WPB (GI) Pole 160x152 (13Mtr. Long, 30.44KG/Mtr.)

Top Channel 100X50X6mm, 9.56 KG/Mtr., each channel length 3 mtr., 2 no's channel required =( 2x9.56x3)

Fish Plate 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280)

Insulator Support Channel for 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 1 no's channel required =( 7.14x4.3 x1)

isolator Support Channel for 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 2 no's channel required =( 7.14x4.3 x2)

Double Pole Belting Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 3.0 Mtr., 4 no's channel required =( 7.14x3x4)

50x50x6mm.GI Bracing Angle, 4.5Kg./mtr., each angle length 3.512 mtr., 4 nos angle required = (4.5x3.512x4)

Isolator operating Down Pipe Support Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 0.8 Mtr., 1 no's channel required =( 7.14x0.8 x1)

Down Pipe Diagonal support Angle (GI) ,4.5 kg,/mtr, each angle (GI) length 0.388 mtr, 1 No angle required (GI) , ( 1*4.5*0.388)

Down Pipe base support Angle (GI) ,4.5 kg,/mtr, each angle (GI) length 0.34 mtr, 1 No angle required (GI) , ( 1*4.5*0.340)

Isolator support side channel (GI) 100X50X6mm,9.56 KG/Mtr., each channel length 0.5 mtr., 2 no's channel required =( 9.56x2x0.5)

Danger Plate, 2 no's.

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510)

H.T. Stay clamp, 50x8 mm. flat, 3.14Kg/Mtr., 0.551 Mtr. Length, 2 no's qty. required ( 1 Pair)

H.T. Stay set (Complete )

H.T. Stay Insulator Type-C

7/10 SWG Stay Wire 15kg /stay

Gi Pipe Earthing 40mm. 3 Mtr. Long

50x6mm GI Flat for earthing, 2.36kg/mtr., (12.5 Mtr. For L.A, 3 Mtr for AB Switch Body, 2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 20.5x2.36

GI barbed wire anticlimbing device 3 Kg. Per support, 2 no's qty. required =(2x3kg)

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 8 no's = (8x0.59x0.510)

Lightning Arrester(12KV,10KA) (Station Class,class-2)

33KV 1250 AMP Double break (Turn,& Twist centre rotating ) isolator without earth switch with PI (polymer))

33KV pin insulator polymer

H W fitting(B&S) 90KN, 4Bolt

Disc insulator (B&S) 90 KN polymer

Wedge connector for 148 sqmm AAA conductor

Paddle clamp for wedge connector of 148 sq mm AAA conductor

GI Nut , Bolt & Washer of different sizes (13.718 Kg each DP with AB Switch)

Polycarbonate bird guard

Black Paint

Yellow Colour Paint for Background

Civil and services Fixing of complete 11KV line Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts BA will do the excvation including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size ( 500mmx500mmx800mm) using 20mm BHG metal with all labour and material as per TPCODL Drawing & Standard.

Concreting ratio 1:1.5:3 (500mmX500mmX1800mm) = 0.45Cu.mtr

Couping ratio 1:1.5:3 with dimension ( 500X500X450)= 0.1125 Cu mtr

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of GI flat around pipe .

33kV 3C, 400sqmm UG Cable Supply of 33kV, 3Core, 400sqmm Aluminium, XLPE insulation UG Cable with spare (SC rating of cable in kA- 37.7kA and SC rating of Armour in kA-20kA)

Supply of Straight through jointing kits Heat Shrinkable type suitable for 33kV, 3Core, 400sqmm, aluminium UG Cable kits

Supply of Outdoor termination kits Heat Shrinkable type suitable for 33kV, 3Core, 400sqmm, HT UG Cable kits

Supply of indoor termination kits Heat Shrinkable type suitable for 33kV, 3Core, 400sqmm, HT UG Cable kits(Touch proof)

Supply of indoor termination kits Heat Shrinkable type suitable for 33kV, 1Core, 400sqmm, HT UG Cable kits(Touch proof)

Supply of materials for High Density Polyethelene (HDPE) pipe 200mm diameter, PE 80- PN8 for laying of 33kV UG cable

Supply of RMU 33KV 630A single BKR module

Earthing Earthing Conductor : 50X6 mm (2.4kg /mtr) flat (GI) for equipments structure etc.

Pipe Earthing 40 mm GI pipe

ERECTION Laying, Commissioning & Testing of 33kV, 3Core, 400sqmm, XLPE insulation (extruted type) UG cable with spare by open trench method.

Erection of Straight through jointing kits/Outdoor termination kits/ indoor termination Kits Heat Shrinkable type suitable for 33kV, 3Core, 400sqmm, aluminium UG Cable kits

Erection of Straight through jointing kits/Outdoor termination kits/ indoor termination Kits Heat Shrinkable type suitable for 33kV, 1Core, 400sqmm, aluminium UG Cable kits

Laying of 200mm dia PE 80-PN8, HDPE pipe inside open trench.

Erection of RMU 33 KV 630A single BKR MODULE + AUXPT

Civil work Earth work excavation of soil

Earth work excavation of hard rock

Back filling with excavated soil outside and above the trench

Damage of asphalt/tar road and other utilities and reconstructing to bring to its original shape after laying of cable in open trench (1mtr. width)

Prefabricated RCC foundation of 33kV RMU

SITC of GI Fencing with Gate around each RMU

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of GI flat around pipe .

Supply and erection of GI Pipe of dia. 150mm, Class-B (8Mtr.)

Supply and Erection of Cable Route Marker along the cable route at an interval of 30mtrs with civil works

11kV 3C, 300sqmm UG Cable Supply of 11kV, 3Core, 300sqmm Aluminium, XLPE insulation UG Cable with spare (SC rating of cable in kA- 28.3kA and SC rating of Armour in kA-15kA)

Supply of Straight through jointing kits Heat Shrinkable type suitable for 11kV, 3Core, 300sqmm, aluminium UG Cable kits

Supply of indoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 300sqmm, HT UG Cable kits(Touch proof)

Supply of outdoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 300sqmm, HT UG Cable kits(Touch proof)

Supply of materials for High Density Polyethelene (HDPE) pipe 160mm diameter, PE 80- PN8 for laying of 11kV UG cable

Supply of RMU 11KV 3 way 630 A (LLV(2iso+1 BKR +AUXPT) ))

Earthing Earthing Conductor : 50X6 mm (2.4kg /mtr) flat (GI) for equipments structure etc.

Pipe Earthing 40 mm GI pipe

ERECTION Laying, Commissioning & Testing of 11kV, 3Core, 300sqmm, XLPE insulation (extruted type) UG cable with spare by open trench method.

Erection of Straight through jointing kits/Outdoor termination kits/ indoor termination Kits Heat Shrinkable type suitable for 11kV, 3Core, 300sqmm, aluminium UG Cable kits

Laying of 200mm dia PE 80-PN8, HDPE pipe inside open trench.

Erection of RMU 11KV 3 way 630 A (LLV(2iso+1 BKR +AUXPT) ))

Civil works Earth work excavation of soil

Earth work excavation of hard rock

Back filling with excavated soil outside and above the trench

Prefabricated RCC foundation of 11kV RMU

SITC of GI Fencing with Gate around each RMU

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of GI flat around pipe .

Supply and erection of GI Pipe of dia. 150mm, Class-B (8Mtr.)

Supply and Erection of Cable Route Marker along the cable route at an interval of 30mtrs with civil works

11kV 3C, 95sqmm UG Cable Supply of 11kV, 3Core, 95sqmm Aluminium, XLPE insulation UG Cable with spare (SC rating of cable in kA- 9kA and SC rating of Armour in kA-9kA)

Supply of indoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 95sqmm, HT UG Cable kits(Touch proof)

Supply of outdoor termination kits Heat Shrinkable type suitable for 11kV, 3Core, 95sqmm, HT UG Cable kits(Touch proof)

Supply of materials for High Density Polyethelene (HDPE) pipe 160mm diameter, PE 80- PN8 for laying of 11kV UG cable

ERECTION Laying, Commissioning & Testing of 11kV, 3Core, 95sqmm, XLPE insulation (extruted type) UG cable with spare by open trench method.

Erection of Straight through jointing kits/Outdoor termination kits/ indoor termination Kits Heat Shrinkable type suitable for 11kV, 3Core, 95sqmm, aluminium UG Cable kits

Laying of 160mm dia PE 80-PN8, HDPE pipe inside open trench.

Civil work Earth work excavation of soil

Earth work excavation of hard rock

Back filling with excavated soil outside and above the trench

Supply and erection of GI Pipe of dia. 150mm, Class-B (8Mtr.)

Supply and Erection of Cable Route Marker along the cable route at an interval of 30mtrs with civil works

11kv DP WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.)

Top Channel 100X50X6mm, 9.56 KG/Mtr., each channel length 3 mtr., 2 no's channel required =( 2x9.56x3)

Fish Plate 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280)

AB switch Mounting Channel 75X40X4.8mm, 7.14KG/Mtr, each channel length 3 Mtr., 2 no's channel required =( 7.14x3x2)

AB Switch Side Support Channel 100X50X6mm,9.56 KG/Mtr., each channel length 0.35 mtr., 2 no's channel required =( 9.56x2x0.35)

Channel Support for down Pipe 75X40X 4.8mm., 7.14KG/Mtr., each channel length 0.8 Mtr., 1 no's channel required =( 7.14x0.8x1)

Double Pole Belting Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 3.0 Mtr., 4 no's channel required =( 7.14x3x4)

50x50x6mm.GI Bracing Angle, 4.5Kg./mtr., each angle length 3.512 mtr., 4 nos angle required = (4.5x3.512x4)

Danger Plate, 2 no's.

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510)

H.T. Stay clamp, 50x8 mm. flat, 3.14Kg/Mtr., 0.551 Mtr. Length, 2 no's qty. required ( 1 Pair)

H.T. Stay set (Complete )

H.T. Stay Insulator Type-C

7/10 SWG Stay Wire 15kg /stay

Gi Pipe Earthing 40mm. 3 Mtr. Long

50x6mm GI Flat for earthing, 2.36kg/mtr., (12.5 Mtr. For L.A, 3 Mtr for AB Switch Body, 2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 20.5x2.36

GI barbed wire anticlimbing device 3 Kg. Per support, 2 no's qty. required =(2x3kg)

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 8 no's = (8x0.59x0.510)

Lightning Arrester(12KV,10KA) (Station Class,class-2)

AB Switch (11KV,400A.3pole,50Hz)

11 KV pin insulator polymer

H W fitting(B&S) 70KN, 3Bolt

Disc insulator (B&S) 70 KN polymer

Wedge connector for 100 sqmm AAA conductor

Polycarbonate bird guard

GI Nut , Bolt & Washer of different sizes (13.718 Kg each DP with AB Switch)

Black Paint

Yellow Colour Paint for Background

Civil and services Fixing of complete 11KV line Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts BA will do the excvation including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size ( 500mmx500mmx800mm) using 20mm BHG metal with all labour and material as per TPCODL Drawing & Standard.

Concreting ratio 1:1.5:3 (500mmX500mmX1800mm) = 0.45Cu.mtr

Couping ratio 1:1.5:3 with dimension ( 500X500X450)= 0.1125 Cu mtr

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of GI flat around pipe .

Installation , Tesitng & Comissioning of 11KV auto reclosure unit on existing structure as per TPCODL specification including loasing unloasing shifting / transporation form site / tant

1.1 kv LT 4C X95 sqmm XLPE U/G cable Supply of 1.1 KV 4C X95 sqmm XLPE insulation armoured - almunium U/G cable open trench

Supply of (HDPE) pipe 110mm diameter, PE 80- PN8

ERECTION Laying of 1.1 KV 4C X95 sqmm XLPE insulation armoured - almunium U/G cable

Laying of (HDPE) pipe 110mm diameter, PE 80- PN8

Supply and erection of double Compression Flameproof Type Glanding for armoured Cable 3.5/4C 50-95 sqmm including making hole in Base plate and dressing of cable along with vermin proofing properly supply to be done as per TOCODL sepc and approved make

Civil work Earth work excavation of soil

Earth work excavation of hard rock

Back filling with excavated soil outside and above the trench

11kv cutpoint with 180 degree angle 9 Mtr. long 300 Kg. PSC Pole

LT Stay set Complete

Straight Cross Arm 100X50X6mm, 9.56 KG/Mtr., each channel length 1.2 mtr., 2 no's channel required =( 2x9.56x1.2)

Danger Plate, 1 no's.

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)

Earthing of Support ( Coil Type )

GI Nut , Bolt & Washer of different sizes (3.55 Kg each Cut Pole)

Black Paint

Yellow Colour Paint for Background

CIVIL and Service Works Concreting ratio 1:1.5:3 (500mmX500mmX1500mm) = 0.375 Cu.mtr per pole

Dismantling Portion Dismentling of 11/13 mtr Joist /WPB pole 150X150MM / 160X160MM

Dismentling of 11/13 mtr Joist /WPB pole 150X150MM / 116x100 MM

Dismentling of 9/8 Mtr PCC/ Joist Pole

Dismentling of existing auto reclouser

Dismentling of ACSR /AAAC 34/ 55mm2 form overhead line

Dismentling of ACSR /AAAC 148/ 232mm2 form overhead line

Dismentling of Various size LT AB CABLE N:B:. Salvage value amounting to Rs.1,16,676.38 to br drductrd from the contractor's bill.

Please Enable Macros to View BoQ information