Work for demolishing and constructing new public toilets, Pay and use, Urinal as well as repairing existing ones, in various Places in Shahibaug Ward

BILL OF QUANTITY

Name Of Work: bÎg Ítullt Ntnectd Jtuzobtkk swœe swœe søgtyu ytJuj vçjef xtuRjux, vu yuLz gwÍ ylu gwhelj le søgtyu lJt

xtuRjux cltJJt <&t hevuhekd fhJtlt ftb ctc<.(yu.yth.me.)

Sr.No. Qty Items Per Amount Rs.

1 Excavation for foundation up to1.5 m depth including

sorting out and stacking of useful materials and

disposing of theexcavated stuff upto 50 Meter

lead.(A) Loose or soft soil (R & B S.O.R 2023-24

I.no. Item Code 04001A)

A 380 Upto 1.5 mt Depth 201.81 Cmt

B 80 1.5 to 3.0 mt.depth 280.05 Cmt

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

not exceeding 20 cm. in depth consolidation each

2 20 deposited layer by ramming and watering. Cmt

Providing and laying cement concrete1:5:10

(1-Cement: 5- coarses sand and:10-hand broken

stone aggregates 40mm nominal size) and

curing complete excluding cost of formworkin (A)

3 10 Foundation and Plinth. Cmt

Providing and laying cement concrete 1:4:8 (1-Cement :

4- coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

4 180 formwork in (A) Foundation and Plinth Cmt

Providing and laying cement concrete1:3:6

(1-Cement: 3- coarses sand and:6-hand broken stone

aggregates 40mm nominal size) and curing

complete excluding cost of formworkin (A)

5 5 Foundation and Plinth. Cmt

Providing and laying cement concrete 1:3:6 (1-

Cement:3-coarse sand:6-crushed stone aggregates

20mm nominal size) and curing complete including

6 5 cost of formwork in (A) wall caps/coping Cmt

Providing and laying cement concrete work

1:2:4 ((1-Cement:2- coarse sand:4-graded aggregates

20mm nominal size) curing complete

7 0 excluding cost of formwork and reinforcement.

Foundations, footings, base or columns and mass

a 80 concrete Cmt

Slabs, landing, shelves, balconies, lintels, beams,

b 80 girders and cantilivers upto floor two level Cmt

Independent piers, columns, and pillars, upto floor two

Provdg. & laying cement concrete 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregates 20 mm

nominal size) for reinforced concrete chhajjas

not exceeding 10 cm. thickness upto floors two

level including finishing the exposed surfaces

with cement mortar 1:3 (1 cement : 3 find sand) to

give a smooth and even surface centering and form

work and curing complete excluding cost of

8 5 reinforcement. Cu.M.

Providing and laying controlled cement concrete /

Ready Mix Concrete of M-200 and curing

complete, excluding the cost of form work and

9 0 reinforcement for reinforced concrete work in:

Foundations, footings, base of columns, and mass

(A) 100 concrete. Cu.M.

Walls from top of foundations /level up to floor Two

(B) 20 level. Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders

(C) 20 and Cantilever upto floor Cu.M.

(D) 20 Columns, pillars, posts, and struts, up to floor two level. Cu.M.

(E) 2 Staircase up to floor two level. (excluding landing) Cu.M.

(K) 2 Vertical and horizontal fins up to floor two level. Cu.M.

Providing and Laying ordinary cement concrete

1:2:4 (1-Cement 2-coarsesand: 4-graded stone

aggregates 20 mm nominal size) and finishing

smooth with curing etc. complete including the cost of

form work but excluding the cost of reinforsement for

R.C.C work in (iv) Slabs having more than 13 cm and

10 25 upto 15 cm.thickness Cum

Providing and Laying ordinary cement concrete

1:2:4 (1-Cement 2-coarsesand: 4-graded stone

aggregates 20 mm nominal size) and finishing

smooth with curing etc. complete including the cost of

form work but excluding the cost of reinforsement for

R.C.C work in (iv) Slabs having more than 8 cm and

11 25 upto 10 cm.thickness Cum

Brick work using common burnt clay building

bricks having crushing strength not less than

35kg./Sq.Cm.in foundation and plinth in Cement

12 0 Mortar1:6 (1-Cement :6 - fine sand)

A 20 (A) Conventional (upto 10 ton) 3981.21 Cmt

B 300 B) Modular 4241.7 Cmt

Extra Rate for brickwork in Above Item for

super structure above plinth level upto floor two level

13 0 (B) Conventional

a 20 (A) Conventional 272.25 Cmt

b 280 B) Modular 262.35 Cmt

c 1 C) above floor two level Item No. 2(6.13) (A) Modular Cum

D) above floor two level Item No. 2(6.13) (B) Per

d 1 Conventional Cum

Half brick masonry in common brunt clay

building bricks having crushing strength not less than

35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-Cement : 5

coarse sand ) in foundation and Plinth

14 200 conventional brickwork Smt

Extra for half brick masonry in super structure

above plinth level upto floor two level (B)

15 30 conventional Smt

Providing form work in ordinary timber planking

so as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

propping and centering below supporting floor to

celling not exceeding 4 M & removal of the

same for in situ reinforced or plain concrete work

16 0 upto floor four level

Foundation, footings, bases of columns etc. and

a 100 mass concrete. Smt

(B) Flat surfaces such as soffits of supspened floors

slabs Landings and the like. (1) Floors etc. upto

b 50 mm in thickness. Smt

(B) Flat surfaces such as soffits of suspended floor roof

slabs Landings and the like. (2) Floors etc. above

c 50 200mm in thickness. Smt

Vertical surface such as walls (any thickness) partitions

and the like including attached buttresses & string

d 50 course & the like. Smt

(ii) Sides And Soffits Of Beam, Haunchings

Cantilevers, Girders, Bressumers And Lintels

e 50 Not Exceeding 1 M In Depth. Smt

(G) Columns PillarsPosts and struts. (1) Square

f 5 Rectangular Polygonal in plan. Smt

g 5 (2) Circular or curved in plan. 422.1 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings

canti-levers Girders Bressumers and Lintels exceeding

h 5 1M.in Depth. Smt

Providing and fixing 35 mm thick panelled, glazed

or panelled and glazed shutters for Doors windows and

clear story windows including anodised alluminium

But hinges with necessary screws and indian teak

17 0 wood shutters with.

a 5 (A) Plywood sheet panels. 3459.09 Smt

b 3 (B) Particle board panels 3464.51 Smt

c 2 (C)Hard board panels. 3433.65 Smt

d 1 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for

cup boards etc. including black enamelled M.S.

butt hinges with necessary screws.(A) Indian teak

18 10 wood. (i) Fully Panelled. Smt

Providing and fixing 25 mm thick shutters for

cupboards etc. including anodised alluminiu butt hinges

with necessary screws. (A) Indian teak wood. (ii) Fully

a 5 Glazed. Smt

Providing and fixing 25 mm thick shutters for

cupboards etc. including anodised alluminiu butt hinges

with necessary screws. (A) Indian teak wood. (ii) Partly

b 5 panelled and partl glazed. Smt

Providing and fixing M.S. grills of required pattern

to wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square or

round bars with round headed bolts and nuts or by

19 1700 screws (A) Plain Grill. kg

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame 10

cm. x 7 cm. size including 3 coats of oil painting

20 30 to wood work etc.complete. Smt

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame 10

cm.x7 cm. size including 3 coats of oil painting

to wood work etc.complete.with wooden louvers

21 5 plank 12mm thick Smt

Providing and fixing 35 mm thick shutters for

Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm.

size including anodized alluminium fixtures and

fastenings including primer coat of approved quality

and two coats of oil painting etc, complete.(ii) Fully

22 5 Glazed. Smt

Providing and fixing 35 mm thick shutters for

Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm. size

including black enamelled iron oxidixed fixtures

and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.(ii)

23 100 Fully Panelled. Smt

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer

coat of approved quality and two coats of oil painting

a 10 etc, complete. (iii) Partly panelled and partly glazed. Smt

Providing and fixing 30 mm thick FACTORY

MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S.tubes of 19 gauge

thickness and size of 19 mm x 19 mm for stiles and

mm x 15 mm for top and bottom rails.M.S. frames hall

have a coat of steel primers of approved make and

manufacture, M.S. frames hall be covered with 5 mm

thick heat moulded PVC ‘C’ channel of size 30 x

50 mm formings tiles, and 5 mm thick 75 mm wide

PVC sheets for to prail, lock rail and bottom rail on

either side, and 10 mm (5 mm x 2) thick, 20 mm

wide cross PVC sheet as gap insert for top rail and

bottom rail, Panelling of 5 stiles and rails with

mm wide x 5 mm thick PVC sheet beading on

eighter side, and joined together with solventcement

adhesive,. An additional 5 mm thick PVC strip of

mm width is to be stculkon the interiors side of the

‘c’ channel using PVC solvent cement

adhesive etc. complete as per direction of

Engineer incharge, manufacture’s specification

24 10 and drawing. Smt

Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonal 20 x 5 mm size with

top and bottom rails T iron 40 x 40 x 6 mm with

mm dia steel pulleys complete with bolts, nuts, locking

arrangements, stoppers, handles, including a

25 5 priming coat of red lead paint & approved make. Sq.M.

Providing and fixing 1 mm thick M.S. sheet

sliding shutters with frame and diagonal braces

of 40x40x6 mm angle iron, 3.15 mm M.S.gusset

plates at Junctions and corners 25 mm dia.

pulley, 40x40x6 mm angle and T-iron guide rail

at top and bottom respactively with handles,

stoppers and locking agangement etc, including

26 5 applying a priming coat of red lead paint. Sqm

Providing & Fixing in position Alluminium doors

with frame using approved quality anodised

extruded alluminium section as approved by

Engg.in charge(Jindal alluminium) (a) Frame

sections 101.6x44.45 mm (b) Shutter bottom vertical

& top section 83.5x44.45 (wt.1.31 kg/mt.)(at

kg/mt) (c) Shutter bottom section at 114.3x44.45

mm at (1.37kg/mt) Shutter middle section at

100x44.3 wt.(1.37 kg/mt) incl.providing &

installing 5 mm thick approved color Acrylic

sheet of standard quality fixed with glazing chips on

upper pannel & Laminated sheet on lower

pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of

27 2 engg.in charge.(N.S.) Smt

Providing and fixing extruded aluminum window

having extruded aluminum Colour r Powder Coated

section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @ Wt.

1.205 Kg/mt,vertical member of size 122.20mm x

31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,vertical member of size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with

5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per Sq.

28 3 details etc complete for window. M.

Providing & Fixing in position Alluminium vents

with frame using approved anodised extruded

alluminium section as approved by Engg. In

charge.(Jindal alluminium) units equivalent Approved

Rate)Frame section of 63.50 x 38.50 mm. (wt.

0.68Kg/Rmt) incl. Providing & Installing 5 mmthick

approved color Acrylic sheet of standard quality Sq.

29 3 etc. comp.(N.S.) M.

Providing and fixing standared extruded of

alluminium section of size 63 mmx38.10 mmx1.2

mm (Jindal Section:2434, or equivalent @ Wt.0.643

Kg/mt) with colour anodized alluminium frame

for ventilation with 5 mm thick frosted glass as Sq.

30 10 details etc complete for Ventilation M.

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg

/ Rmt with colour Powder Coated alluminium frame

with 5 mm thick transparent bronze colour tinted float

31 5 glass as details etc complete for Fix Partition(N.S.) Sq.M.

Providing and laying 40 mm thick marble chips

flooring rubbed and polished (I.E.terrazo) to

granolithic finish with under layer 30 mm thick cement

concrete1:2:4 (1-Cement: 2-coarse sand: 4-graded

stone aggregate 10 mm and down gauge) and to

player 10 mm thick with white, black or white and blak

marble cihps of required sizes from 1 mm to 4 mm

nominal size laid in cement marble powder mix 3:1 (3-

Cement:1-Marble powder by weight) in

proportion of 4:7 (4- Cement: 7-marble chips

by volume) (C) Medium Shade pigment with

approx 50% white cement and 50% ordinary

32 8 cement (In top layer only) (upto 10 ton) Sqm

Providing and laying marble chips skirting (Terrazo)

or dedo rubbed, and polished to Granolithic finish to

player 6 mm white, black or white and black

marble chips of size from smallest to 4 mm

nominal size laid in cement marble powder mix 3:1

(3-Cement: 1 marble powder by weight) in

proportion of 4:7 (4-cement marble powder mix: 7-

marble chips by volume) (B) Light shade pigment with

33 10 white cement (In top layer only) Sqm

Providing and laying white glazed tiles 6mm thick in

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

34 900 sand ) finishing with flush Sq.M.

Providing and laying Ceramic tiles 6 mm thick in

flooring treads of steps and landing laid on a bed of 12

mm thick cement mortar 1:3 (1- cement :3-coarses

35 800 and) finishing with flush pointing in white cement. Sq.M.

Providing & Fixing 20 mm thick Mirror Polished

Decorative Granite Board with Computerised Golden

Letters Discription as per instructions of

engg. in charge to M.S. frame structure for

36 5 Inaugaration & Public Handover Function (N.S.) No.

Providing and laying Vitrified tiles 8 to 10 mm thick,

36''x36'' in flooring treads of steps and landing laid on a

bed of 12 mm thick cement mortar 1:3 (1-

cement:3-coarses and) finishing with flush pointing

37 5 inwhite cement. Sq.M.

Providing and laying Vitrified tiles 8 to 10 mm thick,

24''x24'' in skrting risers of steps and dedo on 10 mm

thick cement plaster 1:3 (1- cement: 3-coarse

38 5 sand) and jointed with white cement slurry Sqm

Providing and laying Vitrified tiles 8 to 10 mm thick, in

skrting risers of steps and dedo on 10 mm thick

cement plaster 1:3 (1-cement:3- coarse sand) and

39 50 jointed with white cement slurry Sqm

Providing and laying Vitrified tiles 8 to 10 mm thick

24'' x 24'' in flooring treads of steps and landing laid on

a bed of 12mm thick cement mortar 1:3 (1- cement : 3-

coarse sand ) finishing with flush pointing in white Sq.

40 10 cement. M.

Providing and laying 24" x 24" vitrified 8 to

mm th.Double Charged Gloosy / Matt tiles of

Approved make as Approved by Adl.C.E. /

Consultants for upto 10 cm high skirting as

approved by Engineer in charge over 10 mm thick

cement mortar 1:6 (1 cement : 6 coarse sand)on new

surface& jointed with colour cement slurry incl with

41 50 flush pointing & cleaning the surface etc. comp. Rmt

Providing and laying polished Kota stone slab flooring

over 20 mm (Average) thick base of cement

mortar 1:6 (1-cement:6-coarses and) or

L.M.1.1.5 (1-Lime putty:1.5-coarses and) laid

over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including

42 300 rubbing and polishing etc. complete. (A) 25 mm thick Sq.M.

Providing and laying marble stone slab flooring over

20mm (average)base of cement mortar 1:6 (1-cement :

6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse

sand) laid and jointed with gray cement slurry including

rubbing and polishing complete. (A) Marble slab 25mm

43 50 thick Sq.M.

Providing and laying polished Kota stone slab flooring

over 20 mm (Average) thick base of cement

mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5

laid over and jointed with grey cement slurry

including rubbing and polishing etc.complete. (B)

44 15 30 mm thick Sq.M.

Providing and laying polished kota stone slab 25 mm

thick in risers of steps, skirting Dedo and pillars laid on

10 mm thick cement mortar 1:3 (1-Cement :3 coarses

and) and jointed with gray cement slury mixed

with pigment to match the shade of slab including

45 15 rubbing and polishing etc.complete. Sq.M.

Providing and laying cement concrete flooring

1:2:4 (1-cement: 2-coarses and:4-graded stone

aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement. (A)

46 18 40mm thick. Sq.M.

Providing and laying cement concrete flooring

1:2:4 (1-cement: 2-coarse sand:4-graded stone

aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement. (B)

47 20 50mm thick. Sq.M.

Providing and laying broken china mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out

upto surface using white cement including

rounding off junctions and extending them up to15

cm along the wall, clearing with water and

48 400 oxalic acid etc.as directed. Sqm

Providing and laying coloured glazed tiles of

the size 300 mmx200 mmx8 mm/300 mmx450

mmx8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1cement:

49 700 coarse sand) & jointed with white cement slurry. Sqm

Providing ridges or hips 600 mm overall in plain

G.I. sheet class-3 fixed with G.I. J or L Hooks and

nuts 8 mm dia G.I. Limpet and bitumen washer

50 30 complete. (1) 0.80 mm thick sheet. Sqm

Providing and fixing 150 mm wide 450 mm over all

semi circular plain G.I.sheet class-3 gutter with Iron

brackets 40 mmx3 mm size Bolts, Nuts, washers

etc. including making necessary connection with rain

51 30 water pipes. (i) 0.80 mm thick Sheet. Sqm

Providing and fixing five courses water profing

treatment with bitumen felt consisting of second

and fourth course of blown/ bitumen or/and

residual bitumen applied hot at 1.2 kg.per Sq.M.of

area for each course and first course with fibre

base bitunen saturated under lay type land third course

with fibre base self finished felt type 2 grade 1 and

fifth and final course of stone grit 6 mm and down

size or pea sizes gravel spread at

0.008 Cu.Metre/Sq.metre preparation of surface

52 60 excluding grading complete. Sqm

Providing and fixing on wall face C.I. Rain water

pipe including filling the joints with spun yarn soaked

in neat cement slurry and cement mortar 1:2(1-

53 120 Cement : 2-fine sand) (A) 75 mm dia. Rmt

Providing 15 mm thick cement plaster in single

coat on Rough (Similar) side of single or half brick

walls for interior plastering up to floor two level

and finished even and smooth in (i) Cement mortar

54 980 1:3 (1-cement :3-sand) Sqm

Providing 20mm thick sand faced cement plaster on

walls upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M.

55 250 1:1 (1-cement : 1-sand) etc. complete. Sqm

Colour washing with lime on wall surface (two

coats) over and including a primary coat of white

washing to give an even shade after through

brooming the surface to remove all dirt, dust,

56 1800 mortar drops and other foreigh matter. Sqm

Removing dry or oil bound distemper by a

washing and scraping and sand papering the wall

surface smooth including necessary repairs to

57 800 scratches complete. Sqm

Distempering with dry distemper of approved brand

and manufacture (two coats) and of required shade

on wall surfaces of given an even shade, over

and including a priming coat of whiting after

thoroughly brooming the surface free from mortar

58 80 dropping and other foreign matter. Sqm

Distempeing (Two coats) with oil bound distemper

of approved brand and manufacture and of

required shade on wall surfaces to give an even

shade, over and including a priming coat with

distemper primer of approved brand and

manufacture after thoroughly brushing the

surface free from mortar dropping and other

foreign matter and also including preparing the

59 900 surface even and sand papered smooth. Sqm

Extra Coat for Above Item over above for

every subsequent coat of approved brand and

60 10 manufacture. Sqm

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

61 1000 papered smooth. Sqm

Extra over item for every sub sequent coat of wall

62 30 painting with plastic emulsion paint of approved brand Sqm

62 a Extra over item 57 for painting with plasticemulsion 5.36 smt

10 paint of approved brand on ceilings andsloping roofs.

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly cleaning, oil, grease, dirt

and other foreign matter and scoured with

brushes fine steel wood, scrapers and sand paper with

63 800 ready mixed priming paint brushing red lead. Sqm

Painting two coats (excluding priming coat) on

new steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including cleaning

64 800 the surface of all dirt, dust and other foreign matter. Sqm

Painting one coats (excluding priming coat) on

previously painted steel and other metal surface with

enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and

65 60 other foreign matter. Sqm

66 50 Extra over item for every sub sequent coat of paint. 50.4 Sqm

Painting two coats (excluding priming coat) on

new steel and other metal surface with synthetic

enamel paint, brushing to give an even shade

including cleaning the surfaceofalldirt,dust and other

67 50 foreign matter. Sqm

Painting one coats (excluding priming coat) on

previously printed steel and other metal surface with

synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust

68 50 and other foreign matter. Sqm

Extra over Above item for every sub sequent coat

69 50 of paint. Sqm

Painting two coats (excluding priming coat) on

external surface of new rain water, soil, waste and

vent pipes and fittings with ready mixed bituminous

brushing, black, anti corrosive to give an even

shade including cleaning of all dirt, dustand other

70 50 foreign matter.(75 mm dia) Sqm

Painting two coats (excluding priming coat) on

external surface of new rain water, soil, waste and

vent pipes and fittings with ready mixed bituminous

brushing, black, anti corrosive to give an even

shade including cleaning of all dirt, dust and other

71 50 foreign matter.(100 mm dia) Sqm

Painting two coats (excluding priming coat) on

new wood and wood based surface with enamel

paint, interior to give an even shade including

cleaning the surface of all dirt, dust and other

72 30 foreign matter sand papering and stopping. Sqm

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface

with enamel paint, to give an even shade including

73 30 cleaning the of all dirt, dust and other foreign matter. Sqm

Extra over Above item for every sub sequent coat of

74 30 paint. Sqm

Painting two coats (excluding priming coat) on

new wood and wood based surface with ready

mixed paint, brushing, oil, gloss, semi gloss to give

and even shade including cleaning of all dust, dirt

and other foreign matters and papering and

75 20 stopping. Sqm

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an

required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of

76 30 loose powdered materials.etc complete Sqm

Applying two coats of Birla (white cement

based) or Asian (acryliclapy-putty) or

equivalent & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter

77 350 and sand papered smooth. Sqm

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface with

enamel paint, to give an even shade including cleaning

78 50 the of all dirt, dust and other foreign matter. Sq.M.

Writing letter or figures on any surface with

black japan paint (stops, comas, hyphens and the per

like not to be measured and paid for separately) 3.15 letter

(i) Block (Letters/Figures) (Per 10 Letter pet per

Demolition including stacking of serviceable

materilas and disposal of unserviceable materials with

80 30 all lead and lift. (i) R.C.C. work Cu.M.

Demolition of Brick work and stone masonry

including stacking of serviceable materil as and

disposalof unserviceable materials with all lead and

81 30 lift.(ii) In Cement Mortar. Cu.M.

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materil as and

disposal of unserviceable materials with all lead and

82 60 lift. Sqm

Dismentaling of sheet roofing including ridges,

Hips, Valleys, Gutters etc. stacking of serviceable

materil as and disposal of unserviceable

83 60 materials with all lead and lift.(i) G.I.sheet roofing. Sqm

Dismentling steel work including distempering

84 300 and stacking the materials with all lead and lift. Kg.

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

architraves, hold fasts and other attachment etc.

complete and stacking the material within all lead and

85 80 lift.(i) Not exceeding 3 Sq.M. in area. Each

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

architraves,hold fasts and other attachment etc.

complete and stacking the material with in all lead

86 80 and lift.(ii) Exceeding 3 Sq.M.in area. Each

Dismentling barbed wire in fencing including making

rolls and also including dismentling fencing posts

including all earth work concrete in base and

making good the disturbed ground stacking useful

materials as directed and disposing as

directed and disposing of the unserviceable

87 450 materials with all lead and lift. Rmt

Dismentling C.I. pipes G.S.W. pipes abd A.C.

rain water pipes with fittings and clamps including

stacking the materials with all lead and lift (for any dia,

88 100 of pipe) Rmt

Dismantling santtary fittings like wash basin . W.C.

pan Indian and Europe an type, flushing tank etc.

89 100 including stacking the materials with all lead and lift Each

Scraping oil paint from steel and other metal

surface and making the surface even (with

90 100 Hand Scraping.) Smt

Removing and scraping of old deteriorated

plaster of any thickness from wall / R.C.C

member including stacking of serviceable

material and disposal of unserviceable from site of

91 500 work with all lead and lift Smt

Providing and fixing M.S. fan clamps of

shape and size as specified in existing R.C.C. slab

92 100 including cutting chase and making good. Each

Cutting out cracks of roof terrace to V-section,

cleaning out, wetting, grouting with cement and

93 50 sand slurry 1:3 (1-cement 3-sand ) Rmt

Cutting out cracks roof terrace to V-Section

cleaning out and filling solidly with a hot

mixture of bitumen and clean dry sand (1:1 by

94 30 weight) Rmt

Providing & Fixing in position Fully Panelled / Partly

Panelled Partly Glazed / Fully Glazed Alluminium

doors with frame using approved quality

anodised extruded alluminium section as approved

by Engg. In charge.(Jindal alluminium )(a) Frame

sections 101.6x44.45 mm b) Shutter vertical &

top section 83.5x44.45 (wt. 1.31 kg/mt.)( at

1.31 kg/mt) © Shutter bottom section at 114.3

x44.45mm at ( 1.37 kg/mt ) Shutter middle section

at 100x44.3 wt. (1.37 kg/mt ) incl. providing &

installing 5 mm thick Glass of standaed quality

fixed / 12 mm thick Laminated sheet with glazing

chips (wt. 0.13 kg/ Rmt) in panels etc. comp. as

per Detail Given & direction of engg.in

95 150 charge.(N.S.) Sq.M.

Providing & Fixing in position Alluminium

window 2/3/4 track sliding / fix type with frame

using approved anodised extruded alluminium

section as approved by Engg. In

charge.(Jindal alluminium) units equivalent.

including P/F installing 5 mm thick clear/tinted Glass Sq.

96 150 of standard quality etc.comp.(N.S.) M.

Providing & Fixing in position Alluminium vents

with frame using approved anodised extruded

alluminium section as approved by Engg. In

charge.(Jindal alluminium) units equivalent Frame

section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt)

incl. Providing & Installing 5 mm thick Glass Sq.

97 60 of standard quality etc. comp.(N.S. M.

Providing and fixing of Ridge flashing for

roof panel shall be made out of 0.5 mm thick

pre coated GI sheet. The Pre coatedsheet shall be

of minimum 240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992, 5-7

microns epoxy primer on both side of the sheet and

polyester top coat 15-18 micron. The PP GI Sheet

shall have plastic protective guard film of minimum

25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel

members by poprivetor self drilling/self

stitching fastners @ maximum 450mm c/c along

98 30 length of capping/flashing etc complete . Sqm

Supplying and fixing vinyl flooring over the surface

having 1-2 mm thickness as per directed by

99 4 engineer incharge etc as completed (N.S.) Smt

Providing and laying 15mm bamboza wooden

flooring as per architect's drawing with all

necessary details as directed by the project

consultants. Use underlay for better result as per

Detail specifications and directed by the project

100 25 consultants. (N.S.) Approved Rate ) Smt

Providing and fixing 1.20 Metre high fencing

with 2.0 Metre long M.S. Angle posts 40 mm x

mm x 6 mm and oil painting 3 coats fixed at

Mt, C/c. with five Horizontan lines and two

diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and fixed

to posts with G.I, staples including fixing the

posts in ground with 0.5 M x 0.5.M x 0.5 M. block in

101 10 C.C 1:5:10 etc complete. Rmt

Renovation and Repairing work in Chainlink

fencing any size and also refixing work incl.

febrication work with all materails to be painted

one coat of primer and twocoats of paint as directed

102 10 inline and level. (N.S.) Rmt.

Constructing a sink (chowkedi) with C.C. 1:2:4,

12 cm. thick over B.B. masonry in C.M, (1:6) in front

and dwarf wall 1.0 Mt. high and 23 cm. thick

cement plaster to masonry / in C.M.1:3) and cement

concrete flooring in 1:2:4: mix 5cm.dia.drain pipe

103 40 etc.complete. Rmt

Constructing a cooking platform 60 cm. width and

cm high resting on B.B. Masonry walls 23 cm. thick in

C.M. (1:6) with (i) Fixing or precast R.C.C.

1:2:4) 8 cm. thick slab with marble chips set in C.M.

(1:6) (6 mm thick terrazo) with plastering on

104 9 exposed faces walls in C.M. (1:4) etc complete. Rmt

Extra rate for using Ready Mix Concrete of any

grade for below ground level to vertical upto any

floor with delivery & suction Pipe & Pump etc. The

rate includes fule, pump operator, skilled labor, driver

105 180 etc completed and as per direction of engineer in charge Cmt

P/A Tremix with dewartering machine and

floater machine on constructed CC work for

finishing the surface as per requirement. The rate

including all machinaries, labor, loading,

unloading, transportaion etc complete as per direction

106 80 given by engineer incharge. Sq.M.

Carrying out timber treatment to all wood work

including drilling holes and spraying oil based chemical

solution on surface of timber work for termite control

including labor and material etc. complete. Using

Chlorpyriphos20 EC as per 6313 2013 Part III (1%

concentration by mass) is recommended one litre

chemical emulsion diluted with 19 liters of kerosene.

Total diluted concentration will be 20 liters inclusive of

1 liter chemical emulsion application in drilled holes

and 0.75 / Litre chemical per one Sqmt two coat on

107 50 wood surface not protected by paint or varnish. Smt

Applying general insecticide pest control treatment to

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS

part -II( (0.075% concentration by mass) is

recommended 10.5ml chemical diluted with 5 liters of

water application 0.5 litre chemical /Sqm of surface is

108 5 recommended as per I.S. Smt

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution

for termite control treatment including labour and

material consist ment with I.S. specification.

Using Chlordene and Chior purfiles 20 EC. As

Per 6131_paret-II Consentration Weight on percentis

recommended i.e one litre 20 EC chemical

emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion

appication attherate of 5 Litre chemical / Sqm

109 9 of surface is recommended as per I.S Smt

Carrying out wall treatment for termite control

including spraying with chemical solution in oil base

including labour and material Using Chlorpyriphos

ECAs per IS 6313 part - II (1% concentration by mass)

is recommended i.e one litre chemical emulsion diluted

with 19 liter oil base. Total solution will be 20 liters

inclusive of one liter chemical emulsion application at

the rate of 7.5 litre chemical / Sqm of surface is

110 10 recommended as per I.S.S Smt

Providing erecting and fixing double coated

Syntex or equivalent PVC.(ISI) water tank of

required capacity each with all necessary fittings and

111 30000 connection etc. complete on terrace. Litre

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of

the following nominal bore, tube fitting and clamps

112 10 including making good the wall ceiling and floor.

0 (F) 50mm 779.6 Rmt

Providing and laying in trenches galvanised mild

steel tubes (Midium grade) of the following

nominal bore, and tube fitting (Earth work in

113 0 trenches to be measured and paid for separately)

Making connection of galvanised Mild steel

distribution branch with galvanised mild steel main

mm to 80 mm nominal bore by providing and

fixing tee including cutting and threading the

114 5 pipes complete. Each

Providing and fixing to wall ceiling and floor

Kg.F/Cm2 working pressure poluthene pipes of the

following out side Dia. Low densidy,

complete with special falnge compression type

fittings,wall clips etc.including making good the

115 0 wall ceiling and floor.

Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene pipes of

the following out side Dia. Low densidy,

complete with special falnge compression type

fittings, wall clips etc. including making good the

116 0 wall ceiling and floor.

Providing and fixing cast iron (Spun) Nahni

trap of the following nominal diameter of self

cleaning design with C.I. screaed down or higned

grating including cost of cutting and making good

the walls and floor 100 mm inlet and 50 mm

117 80 outlet.(C)100mm dia. Each

Providing and fixing water closet squatting Pan

(Indian type W.C.Pan) size 580 mm (Earth

work, bed concrete, foot rest and trap to be

measured and paid for separately) (A) Vitreous

118 80 China. (I)Long pattern = White colour Each

Provdg. & fixing wall mounted White / Color

Vitreous China European water closet with

integral P trap of "Cera" - Clair Series or

equivalent incl. seat cover , Chair Bracket etc.

119 50 complete as per direction of engg. In charge.(N.S.) No.

Providing and fixing wsh down water closet

(Europe an type, W.C.Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

Mortar1:1 (1- Cement:1-fine sand) (Seal and

cover to be measured and paid forseparately) (A)

120 60 vitreous China Pattern :(i) in white colour Each

Provdg. & Fixing Flat Back Large Urinal of White/

colour of "Cera" or " Hindware" incl. C.P. Brass waste

coupline , waste pipe, pvcconnection etc.

121 60 Complete.( size 635 x395x420 mm ) No.

Providing & Fixing Angle cock of " Ess Ess" -

Trend series or equivalent standard make as

122 50 approved by engg. in charge all complete. (N.S.) No.

Providing and fixing 100 mm size P or S trap

for water closet squatting pan including jointing the

trap with the pan and soil pipe in cement

Mortar1:1 (1-Cement : 1-Fine sand)(A) Vitreous

123 50 China. Each

Providing and fixing wash basin with single hole

for pillar tap with C.I.or M.S. brackets painted

white including sutting holes and making good the

same but excluding fittings. (A) Vitreous China: (ii)

Flat Back wash basin 550 mm x v 400 mm size.(i) In

124 30 white colour. Each

Providing and fixing Kitchen sink with C.I. or M.S.

brackets, painted white including cutting holes in

walls and making good the same but excluding

fittings. © Vitreous China Sink. (i) 600 mm x

125 30 mmx 150 mm size Each

Providing and fixing 600 mm x 450 mm bevelled

edge mirrror of superior glass mounted on 6 mm

thick A.C. sheet or ply wood sheet and fixing to

126 30 wooden pluge with C.P. brass screws and washers. Each

Providing and fixing chromium plated brass halftrun

flush cock of approved quality including fixing in pipe

127 line etc. complete.

Provdg. & fixing White / Color Vitreous china

Counter wash basin with signle hole for pillar tap of

"Cera " - Concord series of 550 x425 mm size to be

fiited in stone counter with necessary brackets

painted white incl. cutting holes and making good

the same .Cost Includes P/F C.P. brass waste

coupline, 32 mm dia fisher union ,15 mm dia. Pillar

cock & Angle cock of " Ess Ess"- Trend series

mm dia. Waste pipe etc. complete as per dir.

128 10 of engg. in charge. No.

Providing & Fixing S.S.304 Grade Sink of Nirali

/ Krishna or Equivalent Make for Kitchen

Platform of size : 24":x18" as per Direction of engg.

129 10 In charge No.

Providing and fixing C.P. brass towel rail comlete

with C.P.brass brackets fixed to wooden plugs

130 30 with C.P. brass scews.(B) 600mm x 20mm size. Each

Providing and fixing 600 mmx120 mm glass shelf

with C.P. brass bracket and guard rail complete

131 30 mixed to wooden plug with C.P.brass screws. Each

Providing and fixing toilet paper holder. (A)

132 50 C.P.Brass Each

Providing and fixing screw down bib taps of

following size. (A) Brass screw down bib tap

133 polished bright.

100 (i) 15mm dia. 184.98 Each

80 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of

following size. (B) Brass chromium plated screws down

50 (i) 15mm dia. 184.98 Each

50 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of

135 0 following size. © Gun metal screw down bib tap.

5 (i) 15mm dia. 157.29 Each

5 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head,

screw down high pressure with screws, shanks and

136 0 back nuts.

3 (i) 15mm dia. 305.67 Each

3 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-

137 0 return fullway wheel valve.

50 (i) 15mm dia. 184.98 Each

30 20 mm dia 201.8 Each

0 (III) 25 MM DIA 416.47 Each

0 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half

trun flush cock of approved quality including fixing in

138 0 pipe line etc. complete.

50 (i) 20mm dia. 252.26 Each

30 (ii) 25mm dia. 261.16 Each

0 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved

quality including conecting the Urinal with

waste pipe , tap etc.complete. (A) White earthen

ware flat back or corner type size 430mm x

139 30 260mm x 350mm. Each

Providing and fixing Urinal of approved

quality including connection with trap and

with integral longitudinal flush pipe. (A) Squating

140 30 plate pattern white earthen ware 550mm x 300mm. Each

Providing and fixing chromium plated, bottle

trap with necessary couplings of approved quality

141 20 for wash basin. Each

Providing and fixing ball cock ofapproved quality

142 20 as directed. (A) Copper Metal (i) 25mm dia. Each

Providing and fixing ball cock of approved quality

143 10 as directed. (B)Abonite (i) 25mm dia. Each

Filling with good Quality thor as and where

directed by the Architect / Engineer-in-charge, in

sunk in layers of 15 cm. thickness, including watering,

ramming well etc. complete, as directed by the

144 2 Architect / Engineer-in-charge . Cmt

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/

ASTRAL/ FINOLEX or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with solvent, including cost of

145 300 all materials.adhesive Rmt

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/

ASTRAL/ FINOLEX orequivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

146 250 cost of all materials. Rmt

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/

ASTRAL/ FINOLEX or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

147 50 cost of all materials. Rmt

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/

ASTRAL/ FINOLEX or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

148 5 cost of all materials. Rmt

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/

ASTRAL/ FINOLEX or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

149 5 cost of all materials. Rmt

Providing in line level plumb, fabricating and

fixing three row horizontal barbed wire fencing and

punched tape concertina coil of 9 turns per meter

of 610 mm dia fixed with clips on top of the angle

iron posts. The punched tape concertina coil

having sharp barbs at every 25 mm spacing shall be

0.5 mm thick and 19 mm width and weighting

kg/100 mt. (Average) as per manufacture's

specification. The rate shall also include

providing and fixing 1.20 mt.total long MS angle

x 40 x 6 mm @3.00 mt.c/c spacing embaded in RCC

column, angle posts shall be painted with one coats of

red oxide and two coats of enamel paint of approved

150 10 quality at top compound wall. Rmt

Fixing sun film for protection sunlight in black or any

151 1 colour as as directd by engineer In Charge.(Market rate) Smt

Providing & Fixing 3 mm thick F.R.P.sheet of

Approved Quality & Color / Pattern as per Consultant's

design also includes required fabrication structure

in the grid of 2'-0x2'-0 size using hollow pipe of16

gauge & size 2"x1" & 1"x1" ,G.I. & Bitumen

Washers, Silicon paste application for fixing the

sheet . Rate also includesnecessary bending, cutting,

labor charges , Zinc Primer coat & Two coats of oil

painting of color as approved by consultants &

152 200 making good the wall. (N.S.) SqM

Providing 2 mm thick F.R.P. Gutter with necessary

153 75 M.S. Supporting Brackets. (N.S.) Rmt

Providing & Supplying JCB Machine on rental basis in

case of emergency situation and break down type work

& also during unavoidable condition as per instruction

of engg.incharge , rate includes all nece. shifting, fuel

and operating charges and stacking of useful & non-

useful materials separately up to store. (No payment

should be allowed for non working condition of

machinery and for pipe line excavation and laying

work) SOR - (Jan. 2016) Rates for work of Drainage /

154 30 SWD pipe line Hrs.

To provide Tractor with Hydraulic Trolley, driver with

fuel, to carryout different works during day/night for 8

Hrs. Shift. Work shall be carried out as per the

instructions of Engineer In-Charge. No extra charged

155 3 shall be paid for night shift. Shift

Roller Blind Providing and fixing Roller Blind

curtain fixed on window level on wooden

batten and curtain lift with cotton thin rope,

make of aerolax or equivalent design and

colour as per instruction by engineer – in – Charge

with necessary hardware fitting, material and

156 1 labour etc complete. Smt

Providing & Fixing Door closer - Door closers (Heavy

type of 765 number) Hardwire or Everite Prabhat or

157 90 Equivalent No.

Providing and fixiing M.S. Fan clamps type 1 of 16 mm

dia M.S. bar bent to shape with hooked ends of R.C.C.

slabs during laying incl. painting the exposed protion of

158 5 loops, all as per standard design complete. No.

Providing cement vata (10cm. x 10 cm. size) quarter

round in cement mortar 1:1 including neat cement

159 700 finishing, watering etc. complete. Rmt

Making Water connection from exi.Muni. Water line

Providing and applying fibere reinforced

cementitious micro concrete work in cellings

and beams incl.mixture of CEMSCREED

HM (F) fair mate company material, FBR

bonding agent material with water in suItable

proportion anti corrosive treatment on exposed

beam,celling steel bars with safeCore R incl.all kind

of labour etc.comp.including three coat of

161 5 white wash.(Approved Rate) Smt

Providing and Fixing 1 H.P. Electrical monoblock or

submarcible water pumps withmotor and required cable

and switch board of approved brand and make

162 1 etc.comp.as directed. Set

.Providing TMT Bar FE 415 reinforcement for R.C.C.

work including bending, binding and placing in position

163 1200 complete up to floor two level Kg.

ProvidingTMTBarFE500/500Dreinforcement for

R.C.C.workincluding bending,binding and placing in

position complete upto floor two level placing in

position complete upto floor two level placing in

b 20 position complete upto floor two level Kg.

Providing and fixing 30mm thick solid both side prelam

PVC door shutter (sintex door-equivalent) with

164 10 necessary alluminium fitting with EL-7 section frame Smt

Conveyance charge of Earth,Lime, Murrum, building

rubbish earch manure or sludge and excavated rock and

fly ash,aggregate of any kind etc.comp.upto 5 km

165 700 lead.(L.S.) Cu.M.

Wall panelling with 12 mm MDF fixed to existing

alluminium framing and making grove as per design

and finished with royal plastic paint as per instruction

167 30 of engineer incharge. (N.S.) Smt

Providing and fixing flush door shutters, solid

core construction with frame of first class

hardwood with cross board and face veneer or

plywood face panels, with both side 1 mm

laminate finishing including anodized aluminum

butt hinges with necessary screws. Decorative

type and pine wood core anodized minimum 3 no

150 mm long aluminum butt hinges in flush door

shutters with 2 no of brass holdfast 325 mm long

1 no brass tower bolt 250 mm long and two no of

mm long brass door handle . Decorative both side

laminated Flush door 35 mm thick. with frame of

10 cm x 7 cmt Indian teak wood frame including all

necessary fitting fixtures hardware screw and

adhesive etc fixing up to all lead and lift height up

to 45 mtr from GL etc complete as per direction of

168 60 engineer in charge Smt

P/M/F chainlink jali 8'x4' size as per details sketch &

instructionof engineer in charge same as lal darwaja

garden pattern consisting of 3'dia. M.S black pipe 'A'

class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of

9"x9"x9" size chain link jali of size 2"x2"x10 gauge

fixed in 35x35x5 mm MS angle frame 8'x4' size with

MS flat of size 25x3 mm welded jali etc.comp.The jali

is to be welded to MS pipe with MS flat as instruction

given.The M.S pipe and the M.S angle frame are to be

painted one coat of primer and two coats of paint as

169 50 directed in line and level. (N.S) Rmt

Providing & Fixing masonary wall with porbandar

lachiya stone with well dressed grooveas per directed

by engg.in charge for foundation, plinth or super

structure level (above plinth level upto floor two level)

in cement mortar 1:5 (1-cement : 5-fine sand)

incl.pointing the joint with white cement and yellow

oxide powder in proportion to match stone colour the

joints should be thread grooved as per exi. lake stone

170 1 pitching apperance

(A) stone masonary wall/stone dressed single faced

1 (size 15"x8"x9") Cmt

1 (B) stone coping (size 15"x8"x4") 510 Rmt

0 (C) stone coping (size 15"x8"x9") 790 Rmt

0 (D) stone column (size 15"x15") 10710 Cmt

0 (E) stone column top (size 20"x20"x9") 685 No.

Supplying and fixing of 300 mm-L x 15 mm-B x

380 mm-H Kerb block for Footpath in M-20 grade

using 20 mm nominal size black trap aggregate

of Sevaliya/Timbaor equivalent quality for

pre-cast blocks, reasonablyexposed finish/

formwork , mould with well equippedwith

vibratory system for kerb stones of approved

design including curing, etc. complete, including

thecost of formwork etc. complete. The rate

shall also include necessary cutting of asphalt,

fixing the Kerbstones in line and level on 5 cm

thick sand bedding withnecessary

equipments and materials. The rate shall also

include the flush pointing in CM (1:3) for all joints of

thekerbstones. Filling of zari alone the sides of the

kerbstone fixed with Bituminous concrete

Bituminousconcrete / C.C. mixed in proper position

to flush withthe road surface as directed by

Engineer in change to form a portable mixture.a)

171 100 Laying on 5 cm thick Sand Bedding Rmt

Providing and fixing pre-cast Rubber Dye / steel

Dyeinter locking concrete block 60mm thick with

gradeof concrete M300 pnumatic compressed /

vibratedmechanically and as per approved

172 designConfirming to IS 15658 : 2006 including 35 mm 680.1 Smt.

Sandlayer for levelling and filling the joint with sand

inproper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete.(P.123 I.No14033 Building

Provoding and fixing flush door shutters, solid core

construction with frame of first class hard wood with

cross board and face veneer or ply wood face panels,

including anodised alluminium butt hinges with

necessary screws. (B) Non- decorative type and block

board core anodised alluminium butt hinges in flush

door shutters (2) 35 mm thick. Labour work for fixing

any kind of paving with cement pointing in CM 1:2,

including watering, ramming etc comp. as dir.For

173 10 pavement Smt

I) Laying on Sand bedding as per requirement to fix the

174 350 C.C.Block / Nibhada Stone in Line & Level Smt

Box type metal letters forming composite box made

from 1mm thick stainless steel plate of grade

having brush finish of following font size to be fixed at

Main Gate in english and or Gujrati and including

fixing charges approved before fixing by clent /

175 0 consultant.

A 8 400mm high 1000 Nos.

B 10 300 mm high 750 Nos.

C 0 230 mm high 565 Nos.

Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats

of size 25 mm wide x 1.6 mm thick with flanges of

mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and

other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of

mm centre to centre, to which the ceiling section

mm thick bottom wedge of 80 mm with tapered flanges

of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm

long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the

help of dry wall screws of size 3.5 x 25 mm at 230 mm

c/c, including jointing and finishing to a flush finish of

tapered and square edges of the board with recomme-

nded jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm

on both sides of joint and two coats of primer suitable

for board, all as per manufacturer’s specification and

also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per

drawings, specification and direction of the Engineer in

176 10 Charge but excluding the cost of painting. Smt

Providing & Fixing SPEED BUMP - #2 No (1 black,

yellow) 350 x 500 x 50 mm, Size per color End Cape

350 MM x 175 MM x 50 MM TOP DESIGN - Lining

Top flat ANTI SKID PATTERN FOR GRIP COLOUR

:- YELLOW & BLACK BODY MATERIAL :-

MODIFIED THERMOPLASTICS (Polymer

Rubberized ) • ECO FRIENDLY RECYCLE

RUBBER Packing :- 4 pcs/ woven Bag Load Capacity

:- 20 MT Fitting ( Fixing on TRAKE) :-4 holes & END

CAPE :- 2 HOLE HEX Bolts with Washer Epoxy for

177 8 Bolt Fitting etc. complete as directed by EIC . Rmt.

Providing and fixing of Roller blind curtain/blackout.

The fabric shall be woven from formulated platisol

extruded over a polyaster yarn.The fabric shouldl be

weaved to provide subtle view of the side of the blind

and should offer elimination of glare and sunlight

radiance upto a minimum of 80%.The fabric shall be

178 50 flame retardant. Smt

Providing and fixing PVC/Gpsysum plain colour false

ceiling with grid type with aluminium frame from

gypsteel, fastners ,props, Finishing as per

architectural drawing allowing openings for

A.C. Diffusers, Light/Electrical Points etc –

complete, Prior to fixing on frame.(Brand :

Anutone or equivalent ) (N.S.) or as directd by

179 30 engineer In Charge. Smt

Providing and laying (to level or slopes) and jointing

with stiff mixture of Cement Mortar in proportion 1:1

Salt glazed stoneware pipes including testing of pipes

181 20 and joints complete.(A) 100mm dia. Rmt.

Providing and laying (to level or slopes) and jointing

with stiff mixture of Cement Mortar in proportion 1:1

Salt glazed stoneware pipes including testing of pipes

182 20 and joints complete.(B) 150mm dia. Rmt.

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm

183 5 and 450mm deep for single pipe line. Each

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete

etc. complete.(i)Inside dimensions 500mm x 700 mm

184 5 and 450mm deep for pipe line with one or two inlets. Each

Providing, supplying and fixing precast C.C. blocks (M-

20) edge kerb having size of 75 x 300 x 300 mm depth

and as per design conveying it to the site, jointing into

C:M 1:3 and racking out the joints incl. necessary

185 5 excavation of asphalt, soil etc..completed. Rmt.

Constructing a cooking Sandwich platform 60 cm.

width and 70 cm high resting on B.B.Masonry walls 23

cm.thick in C.M.(1:6) with (ii) Fixing black Granitee

30mm thick laid on precast R.C.C. (1:2:4) slab with

plastering on exposed faces of wall in C.M. (1:4) etc

186 20 complete Rmt.

Providing and fixing hard drawn steel wire fabric 75mm

x 25mm mesh or weight not less than 7.75 kg. per

Sq.M. to window frames etc. including60 x 20mm

187 50 beading of teak wood. Smt

Providing & fixing 15 cm wide chicken mesh jali with

nails & then application of 15 mm plaster on R.C.C.&

188 50 masonary joints as per dir.of engg.in charge Rmt.

Providing and laying cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone aggregate

20mm nominal size) laid in one layer and finished with

189 10 a floating coat of neat cement. (A) 50mm thick. Smt.

Providing and constructing, Underground (U/G) water

tank of specified capacity, on specified location, for all

depths, in controlled CC of M-200 grade with bottom

slab, top slab and RCC walls, including cost of form

work and reinforcement,with inside and outside plaster

in CM 1 :3 and water proofing treatment as per IWP

specification,including injection, grouting, etc.

complete. The rate includes for providing and fixing

two nos. 0.6m. x 0.6 m. size medium duty CI manhole

cover/s at top, including wash out pipe line and inlet

190 10000 and outlet connections etc. complete. Litre

Providing and fixing PVC Printed pain colour false

ceiling with grid type with alluminium frame consisting

of 600mm x 600mm 3mm thick plain PVC sheet used

as panel insert in a frame work made using anodized

alluminium T section of size 1 x 1 (235 x 25mm,

gauge or 1 mm thick) in square pattern of grid sizes of 2

x 2 (600 x 600mm) The alluminium frame work is

supported from the cceiling with the help of G.I. hook

and G.I. wire/6mm M.S. rods of required sizes to

maintain proper level etc. The aluminium frame work is

supported on side wall with the use of alluminium L

section of size 1 x1 (25 x 25mm) angles etc. complete

as per direction of Engineer in charge. Manufactures

191 5 specification and drawing. Smt

Providing and supplying of labour for necessary manual

excavation, cleaning, Shifting of Material Or any other,

or for any other work as directed by Engineer In charge.

192 20 The Rate includes Handcart with Mazdoor No

A 15 Mukadam/supervisior/karigar 425 No

B 15 Fitter/Plumber/Mason 697 No

C 10 WELDER/ Gas cutter at Day /night 689 No

Supplting of welding machine / gas cutter including

cost of welding rods/gas, Transportation, including

D 10 carting from site to work place. No

E 10 Mazdoor at Day Female 450 No's

E 10 Mazdoor at Day Male 493 No's

Supplying Electric Breaker Machine for RCC Slab or

Asphalt Demolishing Work on site by using Operator,

fuel, power Supply etc. Complete as Directed. (No

payment should be allowed for non working condition

of machinery and for pipe line excavation and M.H.

work. Allowed only for break down work) ( Based on

Previously approved rate by C E sir ) SOR - (Jan. 2016)

Rates for work of Drainage / SWD pipe line

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable

water of following dia. Nominal bore tube fittings and

clamps including making good the wall, ceiling and

194 0 floor etc. complete.

A 10 15 MM DIA 165.21 Rmt

B 10 20 MM DIA 202.97 Rmt

C 5 25 MM DIA 247.25 Rmt

D 2 32 MM DIA 330.36 Rmt

E 2 40 MM DIA 437.66 Rmt

F 2 50 MM DIA 647.3 Rmt

Supplying and fixing C.I. cover 300mm x 300mm

without frame for Gulley trap (Standard pattern) te

195 80 weight of cover to be not less 4.53 Kg.) Each

Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene pipes of

the following out side Dia. Low densidy,

complete with special falnge compression type

fittings, wall clips etc. including making good the

196 0 wall ceiling and floor.