Loading…
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹6.5 L
EMD Value
₹6,500
Closing Date
5 Nov 2026, 12:00 pm5d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Block Development Officer ( BP)
Panchayat Union Manapparai
Providing High Mass Solar Light at Muthapudaiiyanpatti Junction in Kannudaiyanpatti Panchayat in Manapparai Block in Tiruchirapalli District
2026_RDTN_717334_1
A2/2484/2026 dt 21.10.2026
Open Tender
Civil Works - Buildings
Item Rate
60 days
Panchayat Union Manapparai
Please refer Tender notice
5 documents required · 5 mandatory
₹0
₹6,500
26 Oct 2026
26 Oct 2026
5 Nov 2026
26 Oct 2026
5 Nov 2026
26 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing High Mass Solar Light at Muthapudaiiyanpatti Junction in Kannudaiyanpatti Panchayat in Manapparai Block in Tiruchirapalli District General features(High mast lightning octagonal tower with solar LED street light with component octagonal pole LED street light room luminaire solar PV model battery based plate mppt maximum PowerPoint tracking charge controller in built dc-dc type driver and acting terminal)Hight of octagonal pole in meter (11meter) Number of LEDstreet light luminaire for each octagonal pole(6) Material of octagonal pole(high tensile steel) Thicknees of octagonal pole sheetin mm(4millimeter) internal distance between parallelfaces at the base of pole in mm(105millimeter) Internal distance between parallel(65millimeter)Internal distance between parallel faces at the top of pole in mm(65millimeter) Number of section(1) Minimum designed life of the pole in year (25year) Regional wind withstand capacity in m/s(44) CONTROLLER Solar charge controller capacitycurrent in ampere(12AMP) BATTERY Type of battery(lithiuit) Battery voltagein volts(12volt) Battery capacityin ah (42) Number of batteries for rach pv module (1) Charging time in day(1) charge controller efficiency(90%) Solar charge controller capacitor voltage in volt(5volt) SOLAR PV MODULE Number of solar panel pv module for each octagonal pole in nos(1) Type of solar module ( crystalline silicon terrestried photovoltaic pv modules) Power output of solar pv model in wp(150) Solar panelefficiency(>14%) BASE PLATE Material of base plate (mild steel) Lengthof base plate in mm (250millimeter) Thickness of the base plate in mm (12millimeter) Standard accessories for each pole (foundation bolts,nuts,washers) Number of bolts for each pole (1) LED luminaire LED rating /system wattage/rated power in watt(80) Lamp efficacy in lumen/watt (2100) LED colour temperature hint cool white/daylight 5000k-6500k (5000) Colour rendering index CRI (270) Total hormonic distortion THD (<10%) Material of housing (high) Beam angle in degree (100) Ingress protection (ip65) Operating temperature range lower limit(10c) Operating temperature range upper limit (45c) Minimum surge withstand voldage in kv(6) PIR Passive infrared sensor (yes) Flickering free (yes) | 1 | No | - | - |
| 2 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification | 2.7 | Cum | - | - |
| 3 | Supplying and filling in basement with filling River sand in layer of not more than 15 cm thick well rammed etc., complete. | 0.23 | Cum | - | - |
| 4 | Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate)using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specfication | 0.23 | Cum | - | - |
| 5 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete | 0.04 | MT | - | - |
| 6 | RCC 1:1 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixing fan clamps and ixtures in rcc works wherever necessary as directed by departmental officer etc., complete. | 0.61 | Sqm | - | - |
| 7 | Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification. | 3.06 | Sqm | - | - |
| 8 | Provision for Name Board | 1 | No | - | - |
| 9 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package} | 1 | GST Amount (in Rupees) | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.70 MB
BOQ_861600.xls
BOQ • 0.28 MB
Pricebid01.pdf
Additional Documents • 0.18 MB
Technicalbid01.pdf
Tender Documents • 0.53 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .