PROVN OF WAITING ROOM AT BLDG NO-10 (NCC HOUSE) AT AHMEDABAD CANTT

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : DGNCC/04/CW/2024-25 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out (Upto 3.00 M beyond outer face of external wall) complete all as specified and directed

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed

Excavation in trenches n exc 1.5 m wide in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and exc 1.5 m but n.exc 3.00 in depth and getting out.

Excavation over areas, n.exc 1.50 in depth and getting out in soft/loose soil complete all as specified and directed

Excavation over areas, exc 1.50 but not exc 3.00m in depth and getting out in soft/loose soil complete all as specified and directed

M&L for treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per sqm of vertical surface area complete all as specified and directed

M&L for treating the top surfacxe of filled Earth at the rate of 5 litres of emulsion per sqm of surface area complete all as specified and directed

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed

M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete complete all as specified and directed

Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

All as per item 1.11 but 6mm to 8 mm dia complete all as specified and directed

All as per item 1.11 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to rough finished surfaces of concrete.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick complete all as specified and directed

Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point .

M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate)as in columns, pillars, piers, posts and struts

M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span

Formwork to sides of squar ,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete flat

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

Formwork for rough finished surface of concrete measured flat for lintle bands complete all as specified and directed

M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) as in chajjas complete all as specified and directed

M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) as in Slabs complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; and similar work not exc 200mm thick; rough finished surfaces of conrete flat complete all as specified and directed

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4 finished even and smooth without using extra cement mixed with water proofing compound (Note :- WPC shall be measured & paid separately)

Supply only Integral waterproofing compound.

S&F for Pressed steel frames 125mmx60mmx1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified

M& L Cement concrete 1:3:6 Type C-02 (using 12.5 mm graded aggregate) as in back filling of steel fram complete all as specified and as directed

S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 2nd hard wood 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts incl SS wire mesh complete all as specified and directed.

S&F Prelaminated Particle Board 18-19mm, Interior Grade, Prelaminated Both Side With Decorative Choice Lamination & Other Side Balancing White Lamination, Fixed With Screws To Timber Frame Work

M & L Butt Hinges, Heavy Weight, Cold Rolled Mild Steel, And Fixed 100 Mm Long complete all as specified and directed

M & L Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200 Mm Long complete all as specified and directed

M & L Extruded brass handles fabricated type polished 150 Mm Long complete all as specified and directed

S & F Solid Pvc Door Frame Of Size 50mm X 47mm Made Out Of 5mm Plain Colour Pvc Sheet Reinforced With M.s. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing

Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (style) Consisting Of Frame Made Out Of M.s. Tubes For Top & Bottom Rails. M.s. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘c’ Channel Having A Pvc Sheet Strip Of 20mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.s. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing.

S&F for glass door made of 12mm thick toughened glass with all fixing arrangements,including all moving assambly for glass door and hydraulic floor door closer, SS Handle locking rrangements, complete all as specified and directed.

S&F for glass wall/ fixed glazing made of 10mm thick toughened glass with all fixing arrangements,including clamps for glass wall, complete all as specified and directed.

S&F aluminium powder coated framed windows/ventilator, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 5 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete all as specified and directed.

M&L Aluminium deco grill medium grade of mesh size 75mm x 75mm with 6mm square anodise aluminium bars fixed with aluminium frame of size 37x19x2mm complete all as specofoed and as directed.

M&L for preparation of new surface and applying Two Coats of Oil Bound Distemper Over One Coat Of Wall Primer Over 3 Mm Thick Wall Care Putty complete all as Specified With Approved Colour Pattern On Walls, Beams, Soffits, Columns, Etc.

All as per item 1.44 but two coat of OBD on ceiling surface complete all as specified and directed

M&L for preparation of new surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces with smart painting tools complete all as specified and directed.

M & L for 18-20 mm thick granite slab (Red/black) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:3).(All exposed surfaces should be bull nosed)

M&L for Hardcore of gauge exc. 63 n.exc 100 mm stone or stone boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75mm thick Cement concrete 1:4:8, type D- 2, (using 40mm graded aggregate) as in sub base complete all as specified and as directed.

M&L for 25mm thick Cement concrete 1::24 type B-1, (using 20mm graded aggregate) as in flooring sub base complete all as specified and as directed.

M & L for Vitrified ceramic tiles 10mm thick (square/rectangular) Light shed/dark shed/double charged / ultra charged area of each tile exceeding 0.42 sqm but npt exc 1.00 sqm , in floors etc. incl screed bed 15 mm in CM 1:6 set and jointed in neat cement slurry incl 3 mm thick PVC spacer shall be used for uniformity of joints , joint gap shall be filled with Epoxy mortar with pigment as per manufacturers instruction.

All as per item 1.51 but as in skirting including 10mm thick backing coat of tiles in CM(1:4) complete all as specified.

M&L for Non Skid ceramic coloured jointless tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete all as specified

M&L for Glazed ceramic tiles coloured (350x450mm) x 7mm thick, in vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified.

M&L for 75 mm thick Plain cement concrete 1:3:6 Type C-2, (using 20mm Graded stone aggregate) as in plinth protection, finish even & smooth without using extra cement complete all as specified and as directed

M&L for for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.

Supplying and laying of 20 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches, fixing on walls/ceiling or laying in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting n.exc 10 cm girth.

M&L for Cast iron Nahani trap,75 mm bore with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed

S&F fancy type Bib taps 15mm bore CP with wall flange , screwed down, screwed for iron pipe or for brass ferrule and fixed. Jaquar cat part no: QQT-7037 or equivalent complete all as specified and directed

S&F wash basin mixer, for mixing hot & cold water screwed down for iron pipe & fixed 15mm bore of pipe of Jaquar make of catalog no. QQT-7167B or equivalent company.

S&F Wall mixer double lever arm kit of Hi -flow Divertor consisting of operating lever wall falnge with seals and button only . mixing hot & cold water screwed down for iron pipe & fixed 15mm bore of pipe of Jaquar make CATALOG NO. QQT-7273UPR equivalent.

S&F Angular stop cock with wall flange of jaquar make CATALOG NO.QQT-7053 complete all as specified and directed

S&F wash down water colset (wall hung type ) with seat cover of jaquar florentine or equivalent , jaquar catalog no. ONS-WHT-10955P18UFSM (inlusive of brackets), to pedestal pan including all joints, trapete complete all as specified and directed

S & F flushing cistern slim concealed cistern body with drain pipe connection site for wall hung WC .CATALOG NO. ONS -WHT-2400S and flushing control plate catalog no. JCP-CHR-852415 with all accessories .

S&F vitreous china counter TOP wash basin, white, of size 425X425X145 mm excluding taps, brass coupling 32mm, bottle trap of 32mm size with 300mm long .catalog no ONS-WHT-10901 complete all as specified and directed

S&F designer looking mirror of size 1350mmX900mm fixing on wall with brass fixing knob complete all as specified and directed

S&F single towel rail of 600mm long of jaquar make catalog no.AHS-CHR1581 or equivalent complete all as specified and directed

S&F soap dish of jaquar make catalog no. AQN-CHR-7731 or equivalent complete all as specified and directed

S&F health faucet spray type incl 1.5M pipe, Make : Jaquar CAT: ALD-573 complete all as specified and directed

S&F in repair over head shower with shower arm 140mm dia . Round shape single flow with air effect shower. ( ABS Body & Face Plate Chrome Plated) of jaquar CAT OHS-CHS-1757 and equivalent.

Supply & fix in toilet paper holder type, Make : Jaquar cat :AHS-CHR-1553 complete all as specified and directed

Supply & fix glass shelve type (Set of three) Make : Jaquar cat :AQN-CHR-7771 complete all as specified and directed

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest)/Asbestos Cement white fiber Board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid under floors bore of 110 mm including bends, socket and fixing material complete all as specified and as directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid under floors .of pipe 75 mm including bends, socket and fixing material complete all as specified and as directed..

S & F Rotational moulded polyethylene (cylindrical vertical with closed top) 1000 ltrs capacity hoisted and fixed in position including inlet, outlet and 20mm bore PTMT float/ball valve all as specified and directed by Engr-in-charge

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete all as specified and as directed

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed

All as per item 1.83 above but with 4Sqmm copper conductor for AC point complete all as specified and directed

S&F modular switch one way 6 amp 1 module all as specified and directed

S&F modular switch one way 16 amp 1 module all as specified and directed

S&F modular socket 6/16 - 2/3 pin combined 2 module all as specified and directed

S&F modular socket 6 amp 3 pin combined 2 module all as specified and directed

S&F Ceiling rose 6 amp, 3 terminals polycarbonate body complete

S & F 120W stepped type electronic fan regulator flush type

S & F AC Power unit Combo with 20A MCB Protected Socket

S & F Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling size 2x2 feet, 36 watt, CCT 6500K, lumen output 120lum/Watt, PF>0.90, THD<10% complete including connecting electrically to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as req and specified and directed by Eng-in-charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM, with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) (Note: Down rod of adequate lenghth as per site requirement for Fan to be suspended at 30cm below false ceiling)

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

S & F MCB SP 5-32A

S & F MCB SPN 32A

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm x 2Core

Supply and laying of DWC (double wall corrugated) HDPE pipe, ISI marked, IS 16205 Part II of outer dia 50mm and inner dia 38mm with smooth internal and profiled external surface for non pressure underground cables including all connected accessories like coupler, o-ring etc complete all as specified and as directed. Make: Rex Polyextrusion/Gemini

SNEH TRADERS (BID ID -3288579)

DMA PROJECTS (BID ID -3286496)

M/s Matadeen Ramchandra Agarwal (BID ID -3286456)